On Mon, Nov 01, 2004 at 02:01:44PM +0100, Christoph Hellwig wrote:
> Move the devicetype-specific functions from net_init.c to the
> devicetype-specific files under net/.
ping? still applies fine against current BK.
--- 1.24/drivers/net/net_init.c 2004-04-06 00:46:26 +02:00
+++ edited/drivers/net/net_init.c 2004-11-01 13:20:45 +01:00
@@ -105,260 +105,6 @@
}
EXPORT_SYMBOL(alloc_netdev);
-/**
- * alloc_etherdev - Allocates and sets up an ethernet device
- * @sizeof_priv: Size of additional driver-private structure to be allocated
- * for this ethernet device
- *
- * Fill in the fields of the device structure with ethernet-generic
- * values. Basically does everything except registering the device.
- *
- * Constructs a new net device, complete with a private data area of
- * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
- * this private data area.
- */
-
-struct net_device *alloc_etherdev(int sizeof_priv)
-{
- return alloc_netdev(sizeof_priv, "eth%d", ether_setup);
-}
-
-EXPORT_SYMBOL(alloc_etherdev);
-
-static int eth_mac_addr(struct net_device *dev, void *p)
-{
- struct sockaddr *addr=p;
- if (netif_running(dev))
- return -EBUSY;
- memcpy(dev->dev_addr, addr->sa_data,dev->addr_len);
- return 0;
-}
-
-static int eth_change_mtu(struct net_device *dev, int new_mtu)
-{
- if ((new_mtu < 68) || (new_mtu > 1500))
- return -EINVAL;
- dev->mtu = new_mtu;
- return 0;
-}
-
-#ifdef CONFIG_FDDI
-
-/**
- * alloc_fddidev - Register FDDI device
- * @sizeof_priv: Size of additional driver-private structure to be allocated
- * for this FDDI device
- *
- * Fill in the fields of the device structure with FDDI-generic values.
- *
- * Constructs a new net device, complete with a private data area of
- * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
- * this private data area.
- */
-
-struct net_device *alloc_fddidev(int sizeof_priv)
-{
- return alloc_netdev(sizeof_priv, "fddi%d", fddi_setup);
-}
-
-EXPORT_SYMBOL(alloc_fddidev);
-
-static int fddi_change_mtu(struct net_device *dev, int new_mtu)
-{
- if ((new_mtu < FDDI_K_SNAP_HLEN) || (new_mtu > FDDI_K_SNAP_DLEN))
- return(-EINVAL);
- dev->mtu = new_mtu;
- return(0);
-}
-
-#endif /* CONFIG_FDDI */
-
-#ifdef CONFIG_HIPPI
-
-static int hippi_change_mtu(struct net_device *dev, int new_mtu)
-{
- /*
- * HIPPI's got these nice large MTUs.
- */
- if ((new_mtu < 68) || (new_mtu > 65280))
- return -EINVAL;
- dev->mtu = new_mtu;
- return(0);
-}
-
-
-/*
- * For HIPPI we will actually use the lower 4 bytes of the hardware
- * address as the I-FIELD rather than the actual hardware address.
- */
-static int hippi_mac_addr(struct net_device *dev, void *p)
-{
- struct sockaddr *addr = p;
- if (netif_running(dev))
- return -EBUSY;
- memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
- return 0;
-}
-
-static int hippi_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p)
-{
- /* Never send broadcast/multicast ARP messages */
- p->mcast_probes = 0;
-
- /* In IPv6 unicast probes are valid even on NBMA,
- * because they are encapsulated in normal IPv6 protocol.
- * Should be a generic flag.
- */
- if (p->tbl->family != AF_INET6)
- p->ucast_probes = 0;
- return 0;
-}
-
-static void hippi_setup(struct net_device *dev)
-{
- dev->set_multicast_list = NULL;
- dev->change_mtu = hippi_change_mtu;
- dev->hard_header = hippi_header;
- dev->rebuild_header = hippi_rebuild_header;
- dev->set_mac_address = hippi_mac_addr;
- dev->hard_header_parse = NULL;
- dev->hard_header_cache = NULL;
- dev->header_cache_update = NULL;
- dev->neigh_setup = hippi_neigh_setup_dev;
-
- /*
- * We don't support HIPPI `ARP' for the time being, and probably
- * never will unless someone else implements it. However we
- * still need a fake ARPHRD to make ifconfig and friends play ball.
- */
- dev->type = ARPHRD_HIPPI;
- dev->hard_header_len = HIPPI_HLEN;
- dev->mtu = 65280;
- dev->addr_len = HIPPI_ALEN;
- dev->tx_queue_len = 25 /* 5 */;
- memset(dev->broadcast, 0xFF, HIPPI_ALEN);
-
-
- /*
- * HIPPI doesn't support broadcast+multicast and we only use
- * static ARP tables. ARP is disabled by hippi_neigh_setup_dev.
- */
- dev->flags = 0;
-}
-
-/**
- * alloc_hippi_dev - Register HIPPI device
- * @sizeof_priv: Size of additional driver-private structure to be allocated
- * for this HIPPI device
- *
- * Fill in the fields of the device structure with HIPPI-generic values.
- *
- * Constructs a new net device, complete with a private data area of
- * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
- * this private data area.
- */
-
-struct net_device *alloc_hippi_dev(int sizeof_priv)
-{
- return alloc_netdev(sizeof_priv, "hip%d", hippi_setup);
-}
-
-EXPORT_SYMBOL(alloc_hippi_dev);
-
-#endif /* CONFIG_HIPPI */
-
-void ether_setup(struct net_device *dev)
-{
- /* Fill in the fields of the device structure with ethernet-generic
values.
- This should be in a common file instead of per-driver. */
-
- dev->change_mtu = eth_change_mtu;
- dev->hard_header = eth_header;
- dev->rebuild_header = eth_rebuild_header;
- dev->set_mac_address = eth_mac_addr;
- dev->hard_header_cache = eth_header_cache;
- dev->header_cache_update= eth_header_cache_update;
- dev->hard_header_parse = eth_header_parse;
-
- dev->type = ARPHRD_ETHER;
- dev->hard_header_len = ETH_HLEN;
- dev->mtu = 1500; /* eth_mtu */
- dev->addr_len = ETH_ALEN;
- dev->tx_queue_len = 1000; /* Ethernet wants good queues */
-
- memset(dev->broadcast,0xFF, ETH_ALEN);
-
- /* New-style flags. */
- dev->flags = IFF_BROADCAST|IFF_MULTICAST;
-}
-EXPORT_SYMBOL(ether_setup);
-
-#ifdef CONFIG_FDDI
-
-void fddi_setup(struct net_device *dev)
-{
- /*
- * Fill in the fields of the device structure with FDDI-generic values.
- * This should be in a common file instead of per-driver.
- */
-
- dev->change_mtu = fddi_change_mtu;
- dev->hard_header = fddi_header;
- dev->rebuild_header = fddi_rebuild_header;
-
- dev->type = ARPHRD_FDDI;
- dev->hard_header_len = FDDI_K_SNAP_HLEN+3; /* Assume 802.2 SNAP
hdr len + 3 pad bytes */
- dev->mtu = FDDI_K_SNAP_DLEN;
/* Assume max payload of 802.2 SNAP frame */
- dev->addr_len = FDDI_K_ALEN;
- dev->tx_queue_len = 100; /* Long queues on FDDI */
-
- memset(dev->broadcast, 0xFF, FDDI_K_ALEN);
-
- /* New-style flags */
- dev->flags = IFF_BROADCAST | IFF_MULTICAST;
-}
-EXPORT_SYMBOL(fddi_setup);
-
-#endif /* CONFIG_FDDI */
-
-#if defined(CONFIG_ATALK) || defined(CONFIG_ATALK_MODULE)
-
-static int ltalk_change_mtu(struct net_device *dev, int mtu)
-{
- return -EINVAL;
-}
-
-static int ltalk_mac_addr(struct net_device *dev, void *addr)
-{
- return -EINVAL;
-}
-
-
-void ltalk_setup(struct net_device *dev)
-{
- /* Fill in the fields of the device structure with localtalk-generic
values. */
-
- dev->change_mtu = ltalk_change_mtu;
- dev->hard_header = NULL;
- dev->rebuild_header = NULL;
- dev->set_mac_address = ltalk_mac_addr;
- dev->hard_header_cache = NULL;
- dev->header_cache_update= NULL;
-
- dev->type = ARPHRD_LOCALTLK;
- dev->hard_header_len = LTALK_HLEN;
- dev->mtu = LTALK_MTU;
- dev->addr_len = LTALK_ALEN;
- dev->tx_queue_len = 10;
-
- dev->broadcast[0] = 0xFF;
-
- dev->flags = IFF_BROADCAST|IFF_MULTICAST|IFF_NOARP;
-}
-EXPORT_SYMBOL(ltalk_setup);
-
-#endif /* CONFIG_ATALK || CONFIG_ATALK_MODULE */
-
int register_netdev(struct net_device *dev)
{
int err;
@@ -404,90 +150,3 @@
EXPORT_SYMBOL(register_netdev);
EXPORT_SYMBOL(unregister_netdev);
-
-#ifdef CONFIG_TR
-
-void tr_setup(struct net_device *dev)
-{
- /*
- * Configure and register
- */
-
- dev->hard_header = tr_header;
- dev->rebuild_header = tr_rebuild_header;
-
- dev->type = ARPHRD_IEEE802_TR;
- dev->hard_header_len = TR_HLEN;
- dev->mtu = 2000;
- dev->addr_len = TR_ALEN;
- dev->tx_queue_len = 100; /* Long queues on tr */
-
- memset(dev->broadcast,0xFF, TR_ALEN);
-
- /* New-style flags. */
- dev->flags = IFF_BROADCAST | IFF_MULTICAST ;
-}
-
-/**
- * alloc_trdev - Register token ring device
- * @sizeof_priv: Size of additional driver-private structure to be allocated
- * for this token ring device
- *
- * Fill in the fields of the device structure with token ring-generic values.
- *
- * Constructs a new net device, complete with a private data area of
- * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
- * this private data area.
- */
-
-struct net_device *alloc_trdev(int sizeof_priv)
-{
- return alloc_netdev(sizeof_priv, "tr%d", tr_setup);
-}
-
-EXPORT_SYMBOL(tr_setup);
-EXPORT_SYMBOL(alloc_trdev);
-
-#endif /* CONFIG_TR */
-
-#ifdef CONFIG_NET_FC
-
-void fc_setup(struct net_device *dev)
-{
- dev->hard_header = fc_header;
- dev->rebuild_header = fc_rebuild_header;
-
- dev->type = ARPHRD_IEEE802;
- dev->hard_header_len = FC_HLEN;
- dev->mtu = 2024;
- dev->addr_len = FC_ALEN;
- dev->tx_queue_len = 100; /* Long queues on fc */
-
- memset(dev->broadcast,0xFF, FC_ALEN);
-
- /* New-style flags. */
- dev->flags = IFF_BROADCAST;
-}
-
-/**
- * alloc_fcdev - Register fibre channel device
- * @sizeof_priv: Size of additional driver-private structure to be allocated
- * for this fibre channel device
- *
- * Fill in the fields of the device structure with fibre channel-generic
values.
- *
- * Constructs a new net device, complete with a private data area of
- * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
- * this private data area.
- */
-
-struct net_device *alloc_fcdev(int sizeof_priv)
-{
- return alloc_netdev(sizeof_priv, "fc%d", fc_setup);
-}
-
-EXPORT_SYMBOL(fc_setup);
-EXPORT_SYMBOL(alloc_fcdev);
-
-#endif /* CONFIG_NET_FC */
-
--- 1.91/include/linux/netdevice.h 2004-10-26 18:09:33 +02:00
+++ edited/include/linux/netdevice.h 2004-11-01 13:13:07 +01:00
@@ -910,10 +910,7 @@
/* These functions live elsewhere (drivers/net/net_init.c, but related) */
extern void ether_setup(struct net_device *dev);
-extern void fddi_setup(struct net_device *dev);
-extern void tr_setup(struct net_device *dev);
-extern void fc_setup(struct net_device *dev);
-extern void fc_freedev(struct net_device *dev);
+
/* Support for loadable net-drivers */
extern struct net_device *alloc_netdev(int sizeof_priv, const char *name,
void (*setup)(struct net_device *));
===== net/802/fc.c 1.3 vs edited =====
--- 1.3/net/802/fc.c 2004-06-24 21:37:35 +02:00
+++ edited/net/802/fc.c 2004-11-01 13:52:59 +01:00
@@ -129,3 +129,35 @@
return ntohs(ETH_P_802_2);
}
+
+static void fc_setup(struct net_device *dev)
+{
+ dev->hard_header = fc_header;
+ dev->rebuild_header = fc_rebuild_header;
+
+ dev->type = ARPHRD_IEEE802;
+ dev->hard_header_len = FC_HLEN;
+ dev->mtu = 2024;
+ dev->addr_len = FC_ALEN;
+ dev->tx_queue_len = 100; /* Long queues on fc */
+ dev->flags = IFF_BROADCAST;
+
+ memset(dev->broadcast, 0xFF, FC_ALEN);
+}
+
+/**
+ * alloc_fcdev - Register fibre channel device
+ * @sizeof_priv: Size of additional driver-private structure to be allocated
+ * for this fibre channel device
+ *
+ * Fill in the fields of the device structure with fibre channel-generic
values.
+ *
+ * Constructs a new net device, complete with a private data area of
+ * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
+ * this private data area.
+ */
+struct net_device *alloc_fcdev(int sizeof_priv)
+{
+ return alloc_netdev(sizeof_priv, "fc%d", fc_setup);
+}
+EXPORT_SYMBOL(alloc_fcdev);
--- 1.3/net/802/fddi.c 2003-09-29 04:23:30 +02:00
+++ edited/net/802/fddi.c 2004-11-01 13:12:14 +01:00
@@ -166,3 +166,44 @@
}
EXPORT_SYMBOL(fddi_type_trans);
+
+static int fddi_change_mtu(struct net_device *dev, int new_mtu)
+{
+ if ((new_mtu < FDDI_K_SNAP_HLEN) || (new_mtu > FDDI_K_SNAP_DLEN))
+ return(-EINVAL);
+ dev->mtu = new_mtu;
+ return(0);
+}
+
+static void fddi_setup(struct net_device *dev)
+{
+ dev->change_mtu = fddi_change_mtu;
+ dev->hard_header = fddi_header;
+ dev->rebuild_header = fddi_rebuild_header;
+
+ dev->type = ARPHRD_FDDI;
+ dev->hard_header_len = FDDI_K_SNAP_HLEN+3; /* Assume 802.2 SNAP
hdr len + 3 pad bytes */
+ dev->mtu = FDDI_K_SNAP_DLEN; /* Assume max payload
of 802.2 SNAP frame */
+ dev->addr_len = FDDI_K_ALEN;
+ dev->tx_queue_len = 100; /* Long queues on FDDI
*/
+ dev->flags = IFF_BROADCAST | IFF_MULTICAST;
+
+ memset(dev->broadcast, 0xFF, FDDI_K_ALEN);
+}
+
+/**
+ * alloc_fddidev - Register FDDI device
+ * @sizeof_priv: Size of additional driver-private structure to be allocated
+ * for this FDDI device
+ *
+ * Fill in the fields of the device structure with FDDI-generic values.
+ *
+ * Constructs a new net device, complete with a private data area of
+ * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
+ * this private data area.
+ */
+struct net_device *alloc_fddidev(int sizeof_priv)
+{
+ return alloc_netdev(sizeof_priv, "fddi%d", fddi_setup);
+}
+EXPORT_SYMBOL(alloc_fddidev);
--- 1.4/net/802/hippi.c 2003-09-29 04:23:30 +02:00
+++ edited/net/802/hippi.c 2004-11-01 13:53:31 +01:00
@@ -154,3 +154,92 @@
}
EXPORT_SYMBOL(hippi_type_trans);
+
+static int hippi_change_mtu(struct net_device *dev, int new_mtu)
+{
+ /*
+ * HIPPI's got these nice large MTUs.
+ */
+ if ((new_mtu < 68) || (new_mtu > 65280))
+ return -EINVAL;
+ dev->mtu = new_mtu;
+ return(0);
+}
+
+/*
+ * For HIPPI we will actually use the lower 4 bytes of the hardware
+ * address as the I-FIELD rather than the actual hardware address.
+ */
+static int hippi_mac_addr(struct net_device *dev, void *p)
+{
+ struct sockaddr *addr = p;
+ if (netif_running(dev))
+ return -EBUSY;
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+ return 0;
+}
+
+static int hippi_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p)
+{
+ /* Never send broadcast/multicast ARP messages */
+ p->mcast_probes = 0;
+
+ /* In IPv6 unicast probes are valid even on NBMA,
+ * because they are encapsulated in normal IPv6 protocol.
+ * Should be a generic flag.
+ */
+ if (p->tbl->family != AF_INET6)
+ p->ucast_probes = 0;
+ return 0;
+}
+
+static void hippi_setup(struct net_device *dev)
+{
+ dev->set_multicast_list = NULL;
+ dev->change_mtu = hippi_change_mtu;
+ dev->hard_header = hippi_header;
+ dev->rebuild_header = hippi_rebuild_header;
+ dev->set_mac_address = hippi_mac_addr;
+ dev->hard_header_parse = NULL;
+ dev->hard_header_cache = NULL;
+ dev->header_cache_update = NULL;
+ dev->neigh_setup = hippi_neigh_setup_dev;
+
+ /*
+ * We don't support HIPPI `ARP' for the time being, and probably
+ * never will unless someone else implements it. However we
+ * still need a fake ARPHRD to make ifconfig and friends play ball.
+ */
+ dev->type = ARPHRD_HIPPI;
+ dev->hard_header_len = HIPPI_HLEN;
+ dev->mtu = 65280;
+ dev->addr_len = HIPPI_ALEN;
+ dev->tx_queue_len = 25 /* 5 */;
+ memset(dev->broadcast, 0xFF, HIPPI_ALEN);
+
+
+ /*
+ * HIPPI doesn't support broadcast+multicast and we only use
+ * static ARP tables. ARP is disabled by hippi_neigh_setup_dev.
+ */
+ dev->flags = 0;
+}
+
+/**
+ * alloc_hippi_dev - Register HIPPI device
+ * @sizeof_priv: Size of additional driver-private structure to be allocated
+ * for this HIPPI device
+ *
+ * Fill in the fields of the device structure with HIPPI-generic values.
+ *
+ * Constructs a new net device, complete with a private data area of
+ * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
+ * this private data area.
+ */
+
+struct net_device *alloc_hippi_dev(int sizeof_priv)
+{
+ return alloc_netdev(sizeof_priv, "hip%d", hippi_setup);
+}
+
+EXPORT_SYMBOL(alloc_hippi_dev);
--- 1.17/net/802/tr.c 2004-06-24 21:36:53 +02:00
+++ edited/net/802/tr.c 2004-11-01 13:14:02 +01:00
@@ -583,6 +583,43 @@
#endif
+static void tr_setup(struct net_device *dev)
+{
+ /*
+ * Configure and register
+ */
+
+ dev->hard_header = tr_header;
+ dev->rebuild_header = tr_rebuild_header;
+
+ dev->type = ARPHRD_IEEE802_TR;
+ dev->hard_header_len = TR_HLEN;
+ dev->mtu = 2000;
+ dev->addr_len = TR_ALEN;
+ dev->tx_queue_len = 100; /* Long queues on tr */
+
+ memset(dev->broadcast,0xFF, TR_ALEN);
+
+ /* New-style flags. */
+ dev->flags = IFF_BROADCAST | IFF_MULTICAST ;
+}
+
+/**
+ * alloc_trdev - Register token ring device
+ * @sizeof_priv: Size of additional driver-private structure to be allocated
+ * for this token ring device
+ *
+ * Fill in the fields of the device structure with token ring-generic values.
+ *
+ * Constructs a new net device, complete with a private data area of
+ * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
+ * this private data area.
+ */
+struct net_device *alloc_trdev(int sizeof_priv)
+{
+ return alloc_netdev(sizeof_priv, "tr%d", tr_setup);
+}
+
/*
* Called during bootup. We don't actually have to initialise
* too much for this.
@@ -604,3 +641,4 @@
EXPORT_SYMBOL(tr_source_route);
EXPORT_SYMBOL(tr_type_trans);
+EXPORT_SYMBOL(alloc_trdev);
--- 1.8/net/appletalk/Makefile 2004-08-18 23:35:04 +02:00
+++ edited/net/appletalk/Makefile 2004-11-01 13:22:42 +01:00
@@ -4,6 +4,6 @@
obj-$(CONFIG_ATALK) += appletalk.o
-appletalk-y := aarp.o ddp.o
+appletalk-y := aarp.o ddp.o dev.o
appletalk-$(CONFIG_PROC_FS) += atalk_proc.o
appletalk-$(CONFIG_SYSCTL) += sysctl_net_atalk.o
--- 1.9/net/ethernet/eth.c 2004-10-05 23:51:01 +02:00
+++ edited/net/ethernet/eth.c 2004-11-01 13:54:23 +01:00
@@ -245,3 +245,64 @@
}
EXPORT_SYMBOL(eth_type_trans);
+
+static int eth_mac_addr(struct net_device *dev, void *p)
+{
+ struct sockaddr *addr=p;
+ if (netif_running(dev))
+ return -EBUSY;
+ memcpy(dev->dev_addr, addr->sa_data,dev->addr_len);
+ return 0;
+}
+
+static int eth_change_mtu(struct net_device *dev, int new_mtu)
+{
+ if ((new_mtu < 68) || (new_mtu > 1500))
+ return -EINVAL;
+ dev->mtu = new_mtu;
+ return 0;
+}
+
+/*
+ * Fill in the fields of the device structure with ethernet-generic values.
+ */
+void ether_setup(struct net_device *dev)
+{
+ dev->change_mtu = eth_change_mtu;
+ dev->hard_header = eth_header;
+ dev->rebuild_header = eth_rebuild_header;
+ dev->set_mac_address = eth_mac_addr;
+ dev->hard_header_cache = eth_header_cache;
+ dev->header_cache_update= eth_header_cache_update;
+ dev->hard_header_parse = eth_header_parse;
+
+ dev->type = ARPHRD_ETHER;
+ dev->hard_header_len = ETH_HLEN;
+ dev->mtu = 1500; /* eth_mtu */
+ dev->addr_len = ETH_ALEN;
+ dev->tx_queue_len = 1000; /* Ethernet wants good queues */
+ dev->flags = IFF_BROADCAST|IFF_MULTICAST;
+
+ memset(dev->broadcast,0xFF, ETH_ALEN);
+
+}
+EXPORT_SYMBOL(ether_setup);
+
+/**
+ * alloc_etherdev - Allocates and sets up an ethernet device
+ * @sizeof_priv: Size of additional driver-private structure to be allocated
+ * for this ethernet device
+ *
+ * Fill in the fields of the device structure with ethernet-generic
+ * values. Basically does everything except registering the device.
+ *
+ * Constructs a new net device, complete with a private data area of
+ * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
+ * this private data area.
+ */
+
+struct net_device *alloc_etherdev(int sizeof_priv)
+{
+ return alloc_netdev(sizeof_priv, "eth%d", ether_setup);
+}
+EXPORT_SYMBOL(alloc_etherdev);
--- /dev/null 2004-08-20 00:05:11.000000000 +0200
+++ b/net/appletalk/dev.c 2004-11-01 13:49:02.111094544 +0100
@@ -0,0 +1,43 @@
+/*
+ * Moved here from drivers/net/net_init.c, which is:
+ * Written 1993,1994,1995 by Donald Becker.
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/if_ltalk.h>
+
+static int ltalk_change_mtu(struct net_device *dev, int mtu)
+{
+ return -EINVAL;
+}
+
+static int ltalk_mac_addr(struct net_device *dev, void *addr)
+{
+ return -EINVAL;
+}
+
+void ltalk_setup(struct net_device *dev)
+{
+ /* Fill in the fields of the device structure with localtalk-generic
values. */
+
+ dev->change_mtu = ltalk_change_mtu;
+ dev->hard_header = NULL;
+ dev->rebuild_header = NULL;
+ dev->set_mac_address = ltalk_mac_addr;
+ dev->hard_header_cache = NULL;
+ dev->header_cache_update= NULL;
+
+ dev->type = ARPHRD_LOCALTLK;
+ dev->hard_header_len = LTALK_HLEN;
+ dev->mtu = LTALK_MTU;
+ dev->addr_len = LTALK_ALEN;
+ dev->tx_queue_len = 10;
+
+ dev->broadcast[0] = 0xFF;
+
+ dev->flags = IFF_BROADCAST|IFF_MULTICAST|IFF_NOARP;
+}
+EXPORT_SYMBOL(ltalk_setup);
|