| To: | Jeff Garzik <jgarzik@xxxxxxxxx> |
|---|---|
| Subject: | Re: [PATCH] b44 ethtool_ops |
| From: | Pekka Pietikainen <pp@xxxxxxxxxx> |
| Date: | Fri, 7 May 2004 14:12:36 +0300 |
| Cc: | Netdev <netdev@xxxxxxxxxxx>, Linux Kernel <linux-kernel@xxxxxxxxxxxxxxx>, Arjan van de Ven <arjanv@xxxxxxxxxx>, Pekka Pietikainen <pp@xxxxxxxxx>, Pavel Machek <pavel@xxxxxxx>, Andrew Morton <akpm@xxxxxxxx> |
| In-reply-to: | <4097FADB.4090105@xxxxxxxxx> |
| References: | <4097FADB.4090105@xxxxxxxxx> |
| Sender: | netdev-bounce@xxxxxxxxxxx |
| User-agent: | Mutt/1.4.2i |
On Tue, May 04, 2004 at 04:19:39PM -0400, Jeff Garzik wrote:
> Testing requested.
>
> Should see no ethtool behavior change, positive or negative.
Well, driver still works, advertised link modes does look a bit odd though
(ethtool-1.8-3.1)
Settings for eth1:
Supported ports: [ MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
Current message level: 0x000000ff (255)
Link detected: yes
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [PATCH] remove useless MOD_{INC,DEC}_USE_COUNT, Christoph Hellwig |
|---|---|
| Next by Date: | [PATCH] remove comx drivers from tree, Christoph Hellwig |
| Previous by Thread: | [PATCH] remove useless MOD_{INC,DEC}_USE_COUNT, Christoph Hellwig |
| Next by Thread: | [PATCH] remove comx drivers from tree, Christoph Hellwig |
| Indexes: | [Date] [Thread] [Top] [All Lists] |