[patch 5/7] 2.6.6-rc3-mm1 - r8169 ethtool .get_settings

[Francois Romieu <romieu@xxxxxxxxxxxxx>]

ethtool get_settings() for r8169 (Andy Lutomirski <luto@xxxxxxxxxxxxx>).

The locking does not need to be specially clever.


diff -puN drivers/net/r8169.c~r8169-ethtool-get_settings drivers/net/r8169.c
--- linux-2.6.6-rc3/drivers/net/r8169.c~r8169-ethtool-get_settings      
2004-05-01 01:46:38.000000000 +0200
+++ linux-2.6.6-rc3-fr/drivers/net/r8169.c      2004-05-01 01:46:38.000000000 
+0200
@@ -336,6 +336,8 @@ struct rtl8169_private {
        unsigned long phy_link_down_cnt;
        u16 cp_cmd;
        u16 intr_mask;
+       int phy_auto_nego_reg;
+       int phy_1000_ctrl_reg;
 };
 
 MODULE_AUTHOR("Realtek");
@@ -451,6 +453,9 @@ static void rtl8169_set_speed(struct net
                        auto_nego &= ~(PHY_Cap_10_Full | PHY_Cap_100_Full);
        }
 
+       tp->phy_auto_nego_reg = auto_nego;
+       tp->phy_1000_ctrl_reg = giga_ctrl;
+
        if (!(status & TBI_Enable)) {
                mdio_write(ioaddr, PHY_AUTO_NEGO_REG, auto_nego);
                mdio_write(ioaddr, PHY_1000_CTRL_REG, giga_ctrl);
@@ -460,6 +465,56 @@ static void rtl8169_set_speed(struct net
                   PHY_Enable_Auto_Nego | PHY_Restart_Auto_Nego);
 }
 
+static int rtl8169_get_settings(struct net_device *dev, struct ethtool_cmd 
*cmd)
+{
+       struct rtl8169_private *tp = netdev_priv(dev);
+       void *ioaddr = tp->mmio_addr;
+       unsigned long flags;
+       u8 status;
+
+       spin_lock_irqsave(&tp->lock, flags);
+
+       status = RTL_R8(PHYstatus);
+       cmd->supported = SUPPORTED_10baseT_Half |
+                        SUPPORTED_10baseT_Full |
+                        SUPPORTED_100baseT_Half |
+                        SUPPORTED_100baseT_Full |
+                        SUPPORTED_1000baseT_Full |
+                        SUPPORTED_Autoneg |
+                        SUPPORTED_TP;
+
+       cmd->autoneg = 1;
+       cmd->advertising = ADVERTISED_TP | ADVERTISED_Autoneg;
+       /*
+        * FIXME: the driver should retrieve the values from the registers
+        * of the rtl8169.
+        */ 
+       if (tp->phy_auto_nego_reg & PHY_Cap_10_Half)
+               cmd->advertising |= ADVERTISED_10baseT_Half;
+       if (tp->phy_auto_nego_reg & PHY_Cap_10_Full)
+               cmd->advertising |= ADVERTISED_10baseT_Full;
+       if (tp->phy_auto_nego_reg & PHY_Cap_100_Half)
+               cmd->advertising |= ADVERTISED_100baseT_Half;
+       if (tp->phy_auto_nego_reg & PHY_Cap_100_Full)
+               cmd->advertising |= ADVERTISED_100baseT_Full;
+       if (tp->phy_1000_ctrl_reg & PHY_Cap_1000_Full)
+               cmd->advertising |= ADVERTISED_1000baseT_Full;
+
+       if (status & _1000bpsF)
+               cmd->speed = SPEED_1000;
+       else if (status & _100bps)
+               cmd->speed = SPEED_100;
+       else if (status & _10bps)
+               cmd->speed = SPEED_10;
+
+       cmd->duplex = ((status & _1000bpsF) || (status & FullDup)) ?
+                     DUPLEX_FULL : DUPLEX_HALF;
+
+       spin_unlock_irqrestore(&tp->lock, flags);
+
+       return 0;
+}
+
 static int rtl8169_set_settings(struct net_device *dev, struct ethtool_cmd 
*cmd)
 {
        struct rtl8169_private *tp = netdev_priv(dev);
@@ -474,6 +529,7 @@ static int rtl8169_set_settings(struct n
 
 static struct ethtool_ops rtl8169_ethtool_ops = {
        .get_drvinfo            = rtl8169_get_drvinfo,
+       .get_settings           = rtl8169_get_settings,
        .set_settings           = rtl8169_set_settings,
 };
 

_