NE61-hplance
* switched to dynamic allocation
* fixed resource leaks on failure exits
diff -urN B9-mvme147/drivers/net/Space.c B9-hplance/drivers/net/Space.c
--- B9-mvme147/drivers/net/Space.c Tue Nov 11 13:57:43 2003
+++ B9-hplance/drivers/net/Space.c Tue Nov 11 15:10:51 2003
@@ -81,7 +81,7 @@
extern int bionet_probe(struct net_device *);
extern int pamsnet_probe(struct net_device *);
extern struct net_device *cs89x0_probe(int unit);
-extern int hplance_probe(struct net_device *dev);
+extern struct net_device *hplance_probe(int unit);
extern struct net_device *bagetlance_probe(int unit);
extern struct net_device *mvme147lance_probe(int unit);
extern struct net_device *tc515_probe(int unit);
@@ -315,13 +315,13 @@
#ifdef CONFIG_ATARI_PAMSNET /* Atari PAMsNet Ethernet board */
{pamsnet_probe, 0},
#endif
-#ifdef CONFIG_HPLANCE /* HP300 internal Ethernet */
- {hplance_probe, 0},
-#endif
{NULL, 0},
};
static struct devprobe2 m68k_probes2[] __initdata = {
+#ifdef CONFIG_HPLANCE /* HP300 internal Ethernet */
+ {hplance_probe, 0},
+#endif
#ifdef CONFIG_MVME147_NET /* MVME147 internal Ethernet */
{mvme147lance_probe, 0},
#endif
diff -urN B9-mvme147/drivers/net/hplance.c B9-hplance/drivers/net/hplance.c
--- B9-mvme147/drivers/net/hplance.c Fri Aug 22 23:10:48 2003
+++ B9-hplance/drivers/net/hplance.c Tue Nov 11 15:10:51 2003
@@ -50,8 +50,7 @@
* plus board-specific init, open and close actions.
* Oh, and we need to tell the generic code how to read and write LANCE
registers...
*/
-int hplance_probe(struct net_device *dev);
-static int hplance_init(struct net_device *dev, int scode);
+static void hplance_init(struct net_device *dev, int scode);
static int hplance_open(struct net_device *dev);
static int hplance_close(struct net_device *dev);
static void hplance_writerap(void *priv, unsigned short value);
@@ -62,57 +61,61 @@
static struct hplance_private *root_hplance_dev;
#endif
+static void cleanup_card(struct net_device *dev)
+{
+ struct hplance_private *lp = dev->priv;
+ dio_unconfig_board(lp->scode);
+}
+
/* Find all the HP Lance boards and initialise them... */
-int __init hplance_probe(struct net_device *dev)
+struct net_device * __init hplance_probe(int unit)
{
- int cards = 0, called = 0;
+ struct net_device *dev;
+
+ if (!MACH_IS_HP300)
+ return ERR_PTR(-ENODEV);
+
+ dev = alloc_etherdev(sizeof(struct hplance_private));
+ if (!dev)
+ return ERR_PTR(-ENOMEM);
+
+ if (unit >= 0) {
+ sprintf(dev->name, "eth%d", unit);
+ netdev_boot_setup_check(dev);
+ }
- if (!MACH_IS_HP300 || called)
- return(ENODEV);
- called++;
+ SET_MODULE_OWNER(dev);
/* Isn't DIO nice? */
for(;;)
{
- int v, scode = dio_find(DIO_ID_LAN);
+ int scode = dio_find(DIO_ID_LAN);
if (!scode)
break;
- if(cards)
- dev = NULL; /* don't trash previous device, make
a new one */
- cards++;
-
- v = hplance_init(dev, scode);
- if (v) /* error, abort immediately
*/
- return v;
+ dio_config_board(scode);
+ hplance_init(dev, scode);
+ if (!register_netdev(dev)) {
+ struct hplance_private *lp = dev->priv;
+ lp->next_module = root_hplance_dev;
+ root_hplance_dev = lp;
+ return dev;
+ }
+ cleanup_card(dev);
}
- /* OK, return success, or ENODEV if we didn't find any cards */
- if (!cards)
- return -ENODEV;
- return 0;
+ free_netdev(dev);
+ return ERR_PTR(-ENODEV);
}
/* Initialise a single lance board at the given select code */
-static int __init hplance_init(struct net_device *dev, int scode)
+static void __init hplance_init(struct net_device *dev, int scode)
{
const char *name = dio_scodetoname(scode);
void *va = dio_scodetoviraddr(scode);
struct hplance_private *lp;
int i;
-#ifdef MODULE
- dev = init_etherdev(0, sizeof(struct hplance_private));
- if (!dev)
- return -ENOMEM;
-#else
- dev->priv = kmalloc(sizeof(struct hplance_private), GFP_KERNEL);
- if (dev->priv == NULL)
- return -ENOMEM;
- memset(dev->priv, 0, sizeof(struct hplance_private));
-#endif
- SET_MODULE_OWNER(dev);
-
printk("%s: %s; select code %d, addr", dev->name, name, scode);
/* reset the board */
@@ -154,17 +157,7 @@
lp->lance.tx_ring_mod_mask = TX_RING_MOD_MASK;
lp->scode = scode;
lp->base = va;
- ether_setup(dev);
printk(", irq %d\n", lp->lance.irq);
-
-#ifdef MODULE
- dev->ifindex = dev_new_index();
- lp->next_module = root_hplance_dev;
- root_hplance_dev = lp;
-#endif /* MODULE */
-
- dio_config_board(scode); /* tell bus scanning code
this one's taken */
- return 0;
}
/* This is disgusting. We have to check the DIO status register for ack every
@@ -227,8 +220,10 @@
MODULE_LICENSE("GPL");
int init_module(void)
{
- root_lance_dev = NULL;
- return hplance_probe(NULL);
+ int found = 0;
+ while (!IS_ERR(hplance_probe(-1)))
+ found++;
+ return found ? 0 : -ENODEV;
}
void cleanup_module(void)
@@ -237,8 +232,8 @@
struct hplance_private *lp;
while (root_hplance_dev) {
lp = root_hplance_dev->next_module;
- dio_unconfig_board(lp->scode);
unregister_netdev(root_lance_dev->dev);
+ cleanup_card(root_lance_dev->dev);
free_netdev(root_lance_dev->dev);
root_lance_dev = lp;
}
|