For 2.6.0-test5, cleanup of config help.
Unify all references to building a module, and get rid of references to
modules.txt
diff -Nru a/drivers/net/Kconfig b/drivers/net/Kconfig
--- a/drivers/net/Kconfig Tue Sep 23 12:05:46 2003
+++ b/drivers/net/Kconfig Tue Sep 23 12:05:46 2003
@@ -53,9 +53,7 @@
Administrator's Guide, available from
<http://www.tldp.org/docs.html#guide>.
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
+ To compile this driver as a module, say M here: the module
will be called dummy. If you want to use more than one dummy
device at a time, you need to compile this driver as a module.
Instead of 'dummy', the devices will then be called 'dummy0',
@@ -78,9 +76,7 @@
This is similar to the EQL driver, but it merges Ethernet segments
instead of serial lines.
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
+ To compile this driver as a module, say M here: the module
will be called bonding.
config EQUALIZER
@@ -100,11 +96,8 @@
section 6.2 of the NET-3-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called eql. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt>. If
- unsure, say N.
+ To compile this driver as a module, say M here: the module
+ will be called eql. If unsure, say N.
config TUN
tristate "Universal TUN/TAP device driver support"
@@ -124,10 +117,8 @@
Please read <file:Documentation/networking/tuntap.txt> for more
information.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called tun. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called tun.
If you don't know what to use this for, you don't need it.
@@ -149,10 +140,8 @@
Ethernet device. Please read the file
<file:Documentation/networking/ethertap.txt> for more information.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called ethertap. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called ethertap.
If you don't know what to use this for, you don't need it.
@@ -231,10 +220,8 @@
motherboard will usually use a MACE (Medium Access Control for
Ethernet) interface. Say Y to include support for the MACE chip.
- This driver is also available as a module called mace ( = code
- which can be inserted in and removed from the running kernel
- whenever you want). If you want to compile it as a module, say M
- here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called mace.
config MACE_AAUI_PORT
bool "Use AAUI port instead of TP by default"
@@ -254,10 +241,8 @@
Say Y for support of BMAC Ethernet interfaces. These are used on G3
computers.
- This driver is also available as a module called bmac ( = code
- which can be inserted in and removed from the running kernel
- whenever you want). If you want to compile it as a module, say M
- here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called bmac.
config OAKNET
tristate "National DP83902AV (Oak ethernet) support"
@@ -265,10 +250,8 @@
help
Say Y if your machine has this type of Ethernet network card.
- This driver is also available as a module called oaknet ( = code
- which can be inserted in and removed from the running kernel
- whenever you want). If you want to compile it as a module, say M
- here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called oaknet.
config ARIADNE
tristate "Ariadne support"
@@ -277,10 +260,8 @@
If you have a Village Tronic Ariadne Ethernet adapter, say Y.
Otherwise, say N.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you
- want). The module is called ariadne. If you want to compile it as
- a module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called ariadne.
config A2065
tristate "A2065 support"
@@ -289,10 +270,8 @@
If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
say N.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you
- want). The module is called a2065. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called a2065.
config HYDRA
tristate "Hydra support"
@@ -300,10 +279,8 @@
help
If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you
- want). The module is called hydra. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called hydra.
config ZORRO8390
tristate "Zorro NS8390-based Ethernet support"
@@ -314,10 +291,8 @@
Computers X-Surf Ethernet cards. If you have such a card, say Y.
Otherwise, say N.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module is called zorro8390. If you want to compile it as
- a module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called zorro8390.
config APNE
tristate "PCMCIA NE2000 support"
@@ -326,10 +301,8 @@
If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
say N.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you
- want). The module is called apne. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called apne.
config APOLLO_ELPLUS
tristate "Apollo 3c505 support"
@@ -358,11 +331,8 @@
read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt> as well as
- <file:Documentation/networking/net-modules.txt>. This module will
- be called mac89x0.
+ To compile this driver as a module, say M here: the module
+ will be called mac89x0.
config MACSONIC
tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
@@ -374,11 +344,8 @@
one of these say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt> as well as
- <file:Documentation/networking/net-modules.txt>. This module will
- be called macsonic.
+ To compile this driver as a module, say M here: the module
+ will be called macsonic.
config MACMACE
bool "Macintosh (AV) onboard MACE ethernet (EXPERIMENTAL)"
@@ -394,27 +361,30 @@
depends on NETDEVICES && MVME147
help
Support for the on-board Ethernet interface on the Motorola MVME147
- single-board computer. Say Y here to include the
- driver for this chip in your kernel. If you want to compile it as
- a module, say M here and read <file:Documentation/modules.txt>.
+ single-board computer.
+
+ To compile this driver as a module, say M here: the module
+ will be called mvme1747.
config MVME16x_NET
tristate "MVME16x Ethernet support"
depends on NETDEVICES && MVME16x
help
This is the driver for the Ethernet interface on the Motorola
- MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
- driver for this chip in your kernel. If you want to compile it as
- a module, say M here and read <file:Documentation/modules.txt>.
+ MVME162, 166, 167, 172 and 177 boards.
+
+ To compile this driver as a module, say M here: the module
+ will be called 82596.
config BVME6000_NET
tristate "BVME6000 Ethernet support"
depends on NETDEVICES && BVME6000
help
This is the driver for the Ethernet interface on BVME4000 and
- BVME6000 VME boards. Say Y here to include the driver for this chip
- in your kernel. If you want to compile it as a module, say M here
- and read <file:Documentation/modules.txt>.
+ BVME6000 VME boards.
+
+ To compile this driver as a module, say M here: the module
+ will be called 82596.
config ATARILANCE
tristate "Atari Lance support"
@@ -532,10 +502,8 @@
cards are based on the AMD Lance chipset, which is better known
via the NE2100 cards.
- This support is also available as a module called sunlance ( =
- code which can be inserted in and removed from the running kernel
- whenever you want). If you want to compile it as a module, say M
- here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called sunlance.
config HAPPYMEAL
tristate "Sun Happy Meal 10/100baseT support"
@@ -546,10 +514,8 @@
both PCI and Sbus devices. This driver also supports the "qfe" quad
100baseT device available in both PCI and Sbus configurations.
- This support is also available as a module called sunhme ( = code
- which can be inserted in and removed from the running kernel
- whenever you want). If you want to compile it as a module, say M
- here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called sunhme.
config SUNBMAC
tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
@@ -558,10 +524,8 @@
This driver supports the "be" interface available as an Sbus option.
This is Sun's older 100baseT Ethernet device.
- This support is also available as a module called sunbmac ( = code
- which can be inserted in and removed from the running kernel
- whenever you want). If you want to compile it as a module, say M
- here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called sunbmac.
config SUNQE
tristate "Sun QuadEthernet support"
@@ -571,10 +535,8 @@
an Sbus option. Note that this is not the same as Quad FastEthernet
"qfe" which is supported by the Happy Meal driver instead.
- This support is also available as a module called sunqe ( = code
- which can be inserted in and removed from the running kernel
- whenever you want). If you want to compile it as a module, say M
- here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called sunqe.
config SUNGEM
tristate "Sun GEM support"
@@ -607,11 +569,8 @@
have problems. Some people suggest to ping ("man ping") a nearby
machine every minute ("man cron") when using this card.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called 3c501. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called 3c501.
config EL2
tristate "3c503 \"EtherLink II\" support"
@@ -621,11 +580,8 @@
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called 3c503. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called 3c503.
config ELPLUS
tristate "3c505 \"EtherLink Plus\" support"
@@ -636,11 +592,8 @@
this type, say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt> as well as
- <file:Documentation/networking/net-modules.txt>. The module will be
- called 3c505.
+ To compile this driver as a module, say M here: the module
+ will be called 3c505.
config EL16
tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)"
@@ -650,11 +603,8 @@
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called 3c507. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called 3c507.
config EL3
tristate "3c509/3c529 (MCA)/3c569B (98)/3c579 \"EtherLink III\" support"
@@ -668,11 +618,8 @@
setup disk to disable Plug & Play mode, and to select the default
media type.
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt> as well as
- <file:Documentation/networking/net-modules.txt>. The module will be
- called 3c509.
+ To compile this driver as a module, say M here: the module
+ will be called 3c509.
config 3C515
tristate "3c515 ISA \"Fast EtherLink\""
@@ -682,11 +629,8 @@
network card, say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt> as well as
- <file:Documentation/networking/net-modules.txt>. The module will be
- called 3c515.
+ To compile this driver as a module, say M here: the module
+ will be called 3c515.
config ELMC
tristate "3c523 \"EtherLink/MC\" support"
@@ -696,11 +640,8 @@
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called 3c523. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called 3c523.
config ELMC_II
tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
@@ -710,11 +651,8 @@
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called 3c527. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called 3c527.
config VORTEX
tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
@@ -735,10 +673,8 @@
<file:Documentation/networking/vortex.txt> and in the comments at
the beginning of <file:drivers/net/3c59x.c>.
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt> as well as
- <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called 3c59x.
config TYPHOON
tristate "3cr990 series \"Typhoon\" support"
@@ -754,11 +690,8 @@
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called typhoon.o. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called typhoon.
config LANCE
tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
@@ -769,10 +702,8 @@
<http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
of this type.
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. This is
- recommended. The module will be called lance.
+ To compile this driver as a module, say M here: the module
+ will be called lance.
config NET_VENDOR_SMC
bool "Western Digital/SMC cards"
@@ -795,11 +726,8 @@
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called wd. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called wd.
config ULTRAMCA
tristate "SMC Ultra MCA support"
@@ -809,11 +737,8 @@
an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called smc-mca. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called smc-mca.
config ULTRA
tristate "SMC Ultra support"
@@ -830,11 +755,8 @@
this but keep it in mind if you have such a SCSI card and have
problems.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called smc-ultra. If you want to compile it as
- a module, say M here and read <file:Documentation/modules.txt> as
- well as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called smc-ultra.
config ULTRA32
tristate "SMC Ultra32 EISA support"
@@ -844,11 +766,8 @@
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called smc-ultra32. If you want to compile it
- as a module, say M here and read <file:Documentation/modules.txt> as
- well as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called smc-ultra32.
config SMC9194
tristate "SMC 9194 support"
@@ -861,11 +780,8 @@
<file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called smc9194. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called smc9194.
config NET_VENDOR_RACAL
bool "Racal-Interlan (Micom) NI cards"
@@ -889,11 +805,8 @@
<http://www.tldp.org/docs.html#howto>. Note that this is still
experimental code.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called ni5010. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called ni5010.
config NI52
tristate "NI5210 support"
@@ -903,11 +816,8 @@
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called ni52. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called ni52.
config NI65
tristate "NI6510 support"
@@ -917,11 +827,8 @@
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called ni65. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called ni65.
source "drivers/net/tulip/Kconfig"
@@ -933,12 +840,8 @@
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt> as well as
- <file:Documentation/networking/net-modules.txt>. The module will be
- called at1700.
+ To compile this driver as a module, say M here: the module
+ will be called at1700.
config DEPCA
tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
@@ -949,12 +852,8 @@
<http://www.tldp.org/docs.html#howto> as well as
<file:drivers/net/depca.c>.
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt> as well as
- <file:Documentation/networking/net-modules.txt>. The module will be
- called
- depca.
+ To compile this driver as a module, say M here: the module
+ will be called depca.
config HP100
tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
@@ -964,11 +863,8 @@
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt> as well as
- <file:Documentation/networking/net-modules.txt>. The module will be
- called hp100.
+ To compile this driver as a module, say M here: the module
+ will be called hp100.
config NET_ISA
bool "Other ISA cards"
@@ -995,11 +891,8 @@
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called e2100. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called e2100.
config EWRK3
tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
@@ -1011,11 +904,8 @@
well as the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt> as well as
- <file:Documentation/networking/net-modules.txt>. The module will be
- called ewrk3.
+ To compile this driver as a module, say M here: the module
+ will be called ewrk3.
config EEXPRESS
tristate "EtherExpress 16 support"
@@ -1028,11 +918,8 @@
because the driver was very unreliable. We now have a new driver
that should do better.
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt> as well as
- <file:Documentation/networking/net-modules.txt>. The module will be
- called eexpress.
+ To compile this driver as a module, say M here: the module
+ will be called eexpress.
config EEXPRESS_PRO
tristate "EtherExpressPro support/EtherExpress 10 (i82595) support"
@@ -1044,11 +931,8 @@
driver. Please read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called eepro. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called eepro.
config FMV18X
tristate "FMV-181/182/183/184 support (OBSOLETE)"
@@ -1061,11 +945,8 @@
If you use an FMV-183 or FMV-184 and it is not working, you may need
to disable Plug & Play mode of the card.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called fmv18x. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called fmv18x.
config HPLAN_PLUS
tristate "HP PCLAN+ (27247B and 27252A) support"
@@ -1075,11 +956,8 @@
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called hp-plus. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called hp-plus.
config HPLAN
tristate "HP PCLAN (27245 and other 27xxx series) support"
@@ -1089,11 +967,8 @@
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called hp. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called hp.
config LP486E
tristate "LP486E on board Ethernet"
@@ -1111,11 +986,8 @@
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called eth16i. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called eth16i.
config NE2000
tristate "NE2000/NE1000 support"
@@ -1132,11 +1004,8 @@
laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
below.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called ne. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called ne.
config ZNET
tristate "Zenith Z-Note support (EXPERIMENTAL)"
@@ -1156,11 +1025,8 @@
is for you, read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt> as well as
- <file:Documentation/networking/net-modules.txt>. The module will be
- called seeq8005.
+ To compile this driver as a module, say M here: the module
+ will be called seeq8005.
config SK_G16
tristate "SK_G16 support (OBSOLETE)"
@@ -1230,11 +1096,8 @@
of different type hasn't been tested with this driver. Say Y if you
have one of these Ethernet adapters.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module is called sk_mca. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called sk_mca.
config NE2_MCA
tristate "NE/2 (ne2000 MCA version) support"
@@ -1244,11 +1107,8 @@
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called ne2. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called ne2.
config IBMLANA
tristate "IBM LAN Adapter/A support"
@@ -1257,14 +1117,17 @@
This is a Micro Channel Ethernet adapter. You need to set
CONFIG_MCA to use this driver. It is both available as an in-kernel
driver and as a module ( = code which can be inserted in and removed
- from the running kernel whenever you want). If you want to compile
- it as a module, say M here and read <file:Documentation/modules.txt>
- as well as <file:Documentation/networking/net-modules.txt>. The only
- currently supported card is the IBM LAN Adapter/A for Ethernet. It
- will both support 16K and 32K memory windows, however a 32K window
- gives a better security against packet losses. Usage of multiple
- boards with this driver should be possible, but has not been tested
- up to now due to lack of hardware.
+ from the running kernel whenever you want).
+
+ To compile this driver as a module, say M here: the module
+ will be called ibmlana.
+
+ The only currently supported card is the IBM LAN Adapter/A
+ for Ethernet. It will both support 16K and 32K memory
+ windows, however a 32K window gives a better security
+ against packet losses. Usage of multiple boards with this
+ driver should be possible, but has not been tested up to now
+ due to lack of hardware.
config NET_PCI
bool "EISA, VLB, PCI and on board controllers"
@@ -1288,11 +1151,8 @@
answer Y here and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called pcnet32. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called pcnet32.
config AMD8111_ETH
tristate "AMD 8111 (new PCI lance) support"
@@ -1302,11 +1162,8 @@
answer Y here and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called amd8111e. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called amd8111e.
config ADAPTEC_STARFIRE
tristate "Adaptec Starfire/DuraLAN support"
@@ -1317,10 +1174,8 @@
Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
driver.
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. This is
- recommended. The module will be called starfire.
+ To compile this driver as a module, say M here: the module
+ will be called starfire.
config ADAPTEC_STARFIRE_NAPI
bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
@@ -1342,11 +1197,8 @@
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called ac3200. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called ac3200.
config APRICOT
tristate "Apricot Xen-II on board Ethernet"
@@ -1356,11 +1208,8 @@
read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt> as well as
- <file:Documentation/networking/net-modules.txt>. The module will be
- called apricot.
+ To compile this driver as a module, say M here: the module
+ will be called apricot.
config B44
tristate "Broadcom 4400 ethernet support (EXPERIMENTAL)"
@@ -1370,11 +1219,8 @@
read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt> as well as
- <file:Documentation/networking/net-modules.txt>. The module will be
- called b44.
+ To compile this driver as a module, say M here: the module
+ will be called b44.
config CS89x0
tristate "CS89x0 support"
@@ -1386,11 +1232,8 @@
<http://www.tldp.org/docs.html#howto> as well as
<file:Documentation/networking/cs89x0.txt>.
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt> as well as
- <file:Documentation/networking/net-modules.txt>. The module will be
- called cs89x.
+ To compile this driver as a module, say M here: the module
+ will be called cs89x.
config TC35815
tristate "TOSHIBA TC35815 Ethernet support"
@@ -1407,11 +1250,8 @@
<http://www.tldp.org/docs.html#howto>. More specific
information is contained in <file:Documentation/networking/dgrs.txt>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called dgrs. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called dgrs.
config EEPRO100
tristate "EtherExpressPro/100 support (eepro100, original Becker
driver)"
@@ -1421,11 +1261,8 @@
card, say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called eepro100. If you want to compile it as
- a module, say M here and read <file:Documentation/modules.txt> as
- well as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called eepro100.
config EEPRO100_PIO
@@ -1509,11 +1346,8 @@
More specific information on configuring the driver is in
<file:Documentation/networking/e100.txt>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called e100. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called e100.
config LNE390
tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
@@ -1523,11 +1357,8 @@
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called lne390. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called lne390.
config FEALNX
tristate "Myson MTD-8xx PCI Ethernet support"
@@ -1562,11 +1393,8 @@
NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
Holtek HT80232 Holtek HT80229
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called ne2k-pci. If you want to compile it as
- a module, say M here and read <file:Documentation/modules.txt> as
- well as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called ne2k-pci.
config NE3210
tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
@@ -1577,11 +1405,8 @@
<http://www.tldp.org/docs.html#howto>. Note that this driver
will NOT WORK for NE3200 cards as they are completely different.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called ne3210. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called ne3210.
config ES3210
tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
@@ -1591,11 +1416,8 @@
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called es3210. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called es3210.
config 8139CP
tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support
(EXPERIMENTAL)"
@@ -1606,10 +1428,8 @@
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read Documentation/modules.txt. This is recommended.
- The module will be called 8139cp.
+ To compile this driver as a module, say M here: the module
+ will be called 8139cp.
config 8139TOO
tristate "RealTek RTL-8139 PCI Fast Ethernet Adapter support"
@@ -1621,10 +1441,8 @@
Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. This is
- recommended. The module will be called 8139too.
+ To compile this driver as a module, say M here: the module
+ will be called 8139too.
config 8139TOO_PIO
bool "Use PIO instead of MMIO"
@@ -1680,10 +1498,8 @@
This driver also supports AMD 79C901 HomePNA so that you can use
your phone line as a network cable.
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. This is
- recommended. The module will be called sis900.
+ To compile this driver as a module, say M here: the module
+ will be called sis900.
config EPIC100
tristate "SMC EtherPower II"
@@ -1725,11 +1541,8 @@
Compaq NetFlex and Olicom cards. Please read the file
<file:Documentation/networking/tlan.txt> for more details.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called tlan. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called tlan.
Please email feedback to torben.mathiasen@xxxxxxxxxxx
@@ -1740,11 +1553,8 @@
If you have a VIA "rhine" based network card (Rhine-I (3043) or
Rhine-2 (VT86c100A)), say Y here.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called via-rhine. If you want to compile it as
- a module, say M here and read <file:Documentation/modules.txt> as
- well as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called via-rhine.
config VIA_RHINE_MMIO
bool "Use MMIO instead of PIO (EXPERIMENTAL)"
@@ -1802,10 +1612,8 @@
said N to the "Parallel printer support", because the two drivers
don't like each other.
- If you want to compile this driver as a module however ( = code
- which can be inserted in and removed from the running kernel
- whenever you want), say M here and read
- <file:Documentation/modules.txt>. The module will be called atp.
+ To compile this driver as a module, say M here: the module
+ will be called atp.
config DE600
tristate "D-Link DE600 pocket adapter support"
@@ -1819,11 +1627,8 @@
port and it is safe to compile the corresponding drivers into the
kernel.
- If you want to compile this driver as a module however ( = code
- which can be inserted in and removed from the running kernel
- whenever you want), say M here and read
- <file:Documentation/modules.txt>.
- The module will be called de600.
+ To compile this driver as a module, say M here: the module
+ will be called de600.
config DE620
tristate "D-Link DE620 pocket adapter support"
@@ -1837,11 +1642,8 @@
port and it is safe to compile the corresponding drivers into the
kernel.
- If you want to compile this driver as a module however ( = code
- which can be inserted in and removed from the running kernel
- whenever you want), say M here and read
- <file:Documentation/modules.txt>.
- The module will be called de620.
+ To compile this driver as a module, say M here: the module
+ will be called de620.
config SGISEEQ
tristate "SGI Seeq ethernet controller support"
@@ -1900,10 +1702,8 @@
as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
line.
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. This is
- recommended. The module will be called acenic.
+ To compile this driver as a module, say M here: the module
+ will be called acenic.
config ACENIC_OMIT_TIGON_I
bool "Omit support for old Tigon I based AceNICs"
@@ -1927,10 +1727,8 @@
D-Link DGE-550T Gigabit Ethernet Adapter.
D-Link DL2000-based Gigabit Ethernet Adapter.
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. This is
- recommended. The module will be called dl2k.
+ To compile this driver as a module, say M here: the module
+ will be called dl2k.
config E1000
tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
@@ -1971,11 +1769,8 @@
More specific information on configuring the driver is in
<file:Documentation/networking/e1000.txt>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called e1000. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called e1000.
config E1000_NAPI
bool "Use Rx Polling (NAPI)"
@@ -1987,10 +1782,8 @@
help
This driver supports MyriCOM Sbus gigabit Ethernet cards.
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. This is
- recommended. The module will be called myri_sbus.
+ To compile this driver as a module, say M here: the module
+ will be called myri_sbus.
config NS83820
tristate "National Semiconduct DP83820 support"
@@ -2010,11 +1803,8 @@
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt> as well as
- <file:Documentation/networking/net-modules.txt>. The module will be
- called hamachi.
+ To compile this driver as a module, say M here: the module
+ will be called hamachi.
config YELLOWFIN
tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
@@ -2026,10 +1816,8 @@
<http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
information about this driver in particular and Beowulf in general.
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. This is
- recommended. The module will be called yellowfin.
+ To compile this driver as a module, say M here: the module
+ will be called yellowfin.
config R8169
tristate "Realtek 8169 gigabit ethernet support"
@@ -2037,10 +1825,8 @@
---help---
Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. This is
- recommended. The module will be called r8169.
+ To compile this driver as a module, say M here: the module
+ will be called r8169.
config SIS190
tristate "SiS190 gigabit ethernet support (EXPERIMENTAL)"
@@ -2048,10 +1834,8 @@
---help---
Say Y here if you have a SiS 190 PCI Gigabit Ethernet adapter.
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. This is
- recommended. The module will be called sis190.
+ To compile this driver as a module, say M here: the module
+ will be called sis190.
config SK98LIN
tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support"
@@ -2113,10 +1897,8 @@
Questions concerning this driver may be addressed to:
linux@xxxxxxxxxxxxx
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read Documentation/modules.txt. This is recommended.
- The module will be called sk98lin.o.
+ To compile this driver as a module, say M here: the module
+ will be called sk98lin.
config CONFIG_SK98LIN_T1
bool "3Com 3C940/3C941 Gigabit Ethernet Adapter"
@@ -2259,10 +2041,8 @@
help
This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. This is
- recommended. The module will be called tg3.
+ To compile this driver as a module, say M here: the module
+ will be called tg3.
endmenu
@@ -2297,11 +2077,8 @@
More specific information on configuring the driver is in
<file:Documentation/networking/ixgb.txt>.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called ixgb. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called ixgb.
config IXGB_NAPI
bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
@@ -2360,10 +2137,8 @@
Questions concerning this driver can be addressed to:
linux@xxxxxxxxxxxxx
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. This is
- recommended. The module will be called skfp.
+ To compile this driver as a module, say M here: the module
+ will be called skfp.
config HIPPI
bool "HIPPI driver support (EXPERIMENTAL)"
@@ -2384,11 +2159,8 @@
help
Say Y here if this is your PCI HIPPI network card.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called rrunner. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt>. If
- unsure, say N.
+ To compile this driver as a module, say M here: the module
+ will be called rrunner.
config ROADRUNNER_LARGE_RINGS
bool "Use large TX/RX rings (EXPERIMENTAL)"
@@ -2431,11 +2203,8 @@
with the PLIP support in Linux versions 1.0.x. This option enlarges
your kernel by about 8 KB.
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt> as well as
- <file:Documentation/networking/net-modules.txt>. The module will be
- called plip. If unsure, say Y or M, in case you buy a laptop
+ To compile this driver as a module, say M here: the module
+ will be called plip. If unsure, say Y or M, in case you buy a laptop
later.
config PPP
@@ -2463,14 +2232,8 @@
synchronous lines, you should say Y (or M) here and to "Support
synchronous PPP", below.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- If you said Y to "Version information on all symbols" above, then
- you cannot compile the PPP driver into the kernel; you can then only
- compile it as a module. The module will be called ppp_generic.
- If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt> as well as
- <file:Documentation/networking/net-modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called ppp_generic.
config PPP_MULTILINK
bool "PPP multilink support (EXPERIMENTAL)"
@@ -2507,9 +2270,8 @@
a modem (not a synchronous or ISDN modem) to contact your ISP, you
need this option.
- This code is also available as a module (code which can be inserted
- into and removed from the running kernel). If you want to compile
- it as a module, say M here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called ppp_async.
If unsure, say Y.
@@ -2521,10 +2283,8 @@
(HDLC) tty devices, such as the SyncLink adapter. These devices
are often used for high-speed leased lines like T1/E1.
- This code is also available as a module (code which can be inserted
- into and removed from the running kernel). If you want to compile
- it as a module, say M here and read
- <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called ppp_sync_tty.
config PPP_DEFLATE
tristate "PPP Deflate compression"
@@ -2537,10 +2297,8 @@
Deflate compression method as well for this to be useful. Even if
they don't support it, it is safe to say Y here.
- This code is also available as a module (code which can be inserted
- into and removed from the running kernel). If you want to compile
- it as a module, say M here and read
- <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called ppp_deflate.
config PPP_BSDCOMP
tristate "PPP BSD-Compress compression"
@@ -2557,9 +2315,8 @@
above) is preferable to BSD-Compress, because it compresses better
and is patent-free.
- Note that the BSD compression code will always be compiled as a
- module; it is called bsd_comp and will show up in the directory
- modules once you have said "make modules". If unsure, say N.
+ To compile this driver as a module, say M here: the module
+ will be calledbsd_comp.
config PPPOE
tristate "PPP over Ethernet (EXPERIMENTAL)"
@@ -2610,11 +2367,8 @@
<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
support will enlarge your kernel by about 4 KB. If unsure, say N.
- If you want to compile this as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt> as well as
- <file:Documentation/networking/net-modules.txt>. The module will be
- called slip.
+ To compile this driver as a module, say M here: the module
+ will be called slip.
config SLIP_COMPRESSED
bool "CSLIP compressed headers"
@@ -2674,10 +2428,8 @@
help
Say Y here if you have a Fibre Channel adaptor of this kind.
- The driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called iph5526. For general information about
- modules read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called iph5526.
config RCPCI
tristate "Red Creek Hardware VPN (EXPERIMENTAL)"
@@ -2686,10 +2438,8 @@
This is a driver for hardware which provides a Virtual Private
Network (VPN). Say Y if you have it.
- This code is also available as a module called rcpci ( = code
- which can be inserted in and removed from the running kernel
- whenever you want). If you want to compile it as a module, say M
- here and read <file:Documentation/modules.txt>.
+ To compile this driver as a module, say M here: the module
+ will be called rcpci.
config SHAPER
tristate "Traffic Shaper (EXPERIMENTAL)"
@@ -2709,11 +2459,8 @@
program, available from <ftp://shadow.cabi.net/pub/Linux/> in the
shaper package.
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called shaper. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt>. If
- unsure, say N.
+ To compile this driver as a module, say M here: the module
+ will be called shaper. If unsure, say N.
source "drivers/net/wan/Kconfig"
|