<div dir="ltr"><div>Hi Everyone,</div><div>I have a question about nobarriers. In the XFS FAQ it looks like the recommendation is that if you have a Battery Backed raid controller you should set nobarriers for performance reasons.</div><div>Our LSI card doesn’t have battery backed cache as it’s configured in HBA mode (IT) rather than Raid (IR). Our Intel s3710 SSD’s do have a capacitor backed cache though.</div><div>So is it recommended that barriers are turned off as the drive has a safe cache (I am confident that the cache will write out to disk on power failure)?</div><div><br></div><div>The reason I am asking about this is that we are seeing some significant I/O delays on the disks causing a “SCSI Task Abort” from the OS. This seems to be triggered by the drive receiving a “Synchronize cache command”.</div><div>My current thinking is that setting no barriers will stop the drive receiving a sync command and therefore stop the I/O delay associated with it.</div><div><br></div><div>This is happening on our Ceph storage cluster. For those not familiar with Ceph, it uses XFS as the underlying filesystem for the object stores.</div><div><br></div><div>Has anyone else encountered this issue?</div><div>Any info or suggestions about this would be appreciated. </div><div><br></div><div>Regards,</div><div>Richard</div><div><br></div></div>