[PATCH 014/119] xfs: introduce interval queries on btrees
Brian Foster
bfoster at redhat.com
Tue Jun 28 07:32:19 CDT 2016
On Mon, Jun 27, 2016 at 02:07:46PM -0700, Darrick J. Wong wrote:
> On Wed, Jun 22, 2016 at 11:18:00AM -0400, Brian Foster wrote:
> > On Thu, Jun 16, 2016 at 06:19:21PM -0700, Darrick J. Wong wrote:
> > > Create a function to enable querying of btree records mapping to a
> > > range of keys. This will be used in subsequent patches to allow
> > > querying the reverse mapping btree to find the extents mapped to a
> > > range of physical blocks, though the generic code can be used for
> > > any range query.
> > >
> > > v2: add some shortcuts so that we can jump out of processing once
> > > we know there won't be any more records to find.
> > >
> > > Signed-off-by: Darrick J. Wong <darrick.wong at oracle.com>
> > > ---
> > > fs/xfs/libxfs/xfs_btree.c | 249 +++++++++++++++++++++++++++++++++++++++++++++
> > > fs/xfs/libxfs/xfs_btree.h | 22 +++-
> > > fs/xfs/xfs_trace.h | 1
> > > 3 files changed, 267 insertions(+), 5 deletions(-)
> > >
> > >
> > > diff --git a/fs/xfs/libxfs/xfs_btree.c b/fs/xfs/libxfs/xfs_btree.c
> > > index afcafd6..5f5cf23 100644
> > > --- a/fs/xfs/libxfs/xfs_btree.c
> > > +++ b/fs/xfs/libxfs/xfs_btree.c
> > > @@ -4509,3 +4509,252 @@ xfs_btree_calc_size(
> > > }
> > > return rval;
> > > }
> > > +
> > > +/* Query a regular btree for all records overlapping a given interval. */
> >
> > Can you elaborate on the search algorithm used? (More for reference
> > against the overlapped query, as that one is more complex).
>
> Ok. Both query_range functions aim to return all records intersecting the
> given range.
>
> For non-overlapped btrees, we start with a LE lookup of the low key and
> return each record we find a the record with a key greater than the
> high key.
>
> For overlapped btrees, we follow the procedure in the "Interval trees"
> section of _Introduction to Algorithms_, which is 14.3 in the 2nd and
> 3rd editions. The query algorithm is roughly as follows:
>
> For any leaf btree node, generate the low and high keys for the record.
> If there's a range overlap with the query's low and high keys, pass the
> record to the iterator function.
>
> For any internal btree node, compare the low and high keys for each pointer
> against the query's low and high keys. If there's an overlap, follow the
> pointer downwards in the tree.
>
> (I could render the figures in the book as ASCII art if anyone wants.)
>
Thanks. I meant more to update the comments above each function. :) No
need to go as far as ASCII art I don't think (the external reference
might be good though). I was really just looking for something that says
"this function is supposed to do <whatever>" so somebody reading through
it has a starting point of reference.
> >
> > > +STATIC int
> > > +xfs_btree_simple_query_range(
> > > + struct xfs_btree_cur *cur,
> > > + union xfs_btree_irec *low_rec,
> > > + union xfs_btree_irec *high_rec,
> > > + xfs_btree_query_range_fn fn,
> > > + void *priv)
> > > +{
> > > + union xfs_btree_rec *recp;
> > > + union xfs_btree_rec rec;
> > > + union xfs_btree_key low_key;
> > > + union xfs_btree_key high_key;
> > > + union xfs_btree_key rec_key;
> > > + __int64_t diff;
> > > + int stat;
> > > + bool firstrec = true;
> > > + int error;
> > > +
> > > + ASSERT(cur->bc_ops->init_high_key_from_rec);
> > > +
> > > + /* Find the keys of both ends of the interval. */
> > > + cur->bc_rec = *high_rec;
> > > + cur->bc_ops->init_rec_from_cur(cur, &rec);
> > > + cur->bc_ops->init_key_from_rec(&high_key, &rec);
> > > +
> > > + cur->bc_rec = *low_rec;
> > > + cur->bc_ops->init_rec_from_cur(cur, &rec);
> > > + cur->bc_ops->init_key_from_rec(&low_key, &rec);
> > > +
> > > + /* Find the leftmost record. */
> > > + stat = 0;
> > > + error = xfs_btree_lookup(cur, XFS_LOOKUP_LE, &stat);
> > > + if (error)
> > > + goto out;
> > > +
> > > + while (stat) {
> > > + /* Find the record. */
> > > + error = xfs_btree_get_rec(cur, &recp, &stat);
> > > + if (error || !stat)
> > > + break;
> > > +
> > > + /* Can we tell if this record is too low? */
> > > + if (firstrec) {
> > > + cur->bc_rec = *low_rec;
> > > + cur->bc_ops->init_high_key_from_rec(&rec_key, recp);
> > > + diff = cur->bc_ops->key_diff(cur, &rec_key);
> > > + if (diff < 0)
> > > + goto advloop;
> > > + }
> > > + firstrec = false;
> >
> > This could move up into the if block.
>
> Ok.
>
> > > +
> > > + /* Have we gone past the end? */
> > > + cur->bc_rec = *high_rec;
> > > + cur->bc_ops->init_key_from_rec(&rec_key, recp);
> >
> > I'd move this up to immediately after the xfs_btree_get_rec() call and
> > eliminate the duplicate in the 'if (firstrec)' block above.
>
> Ok. That key ought to be named rec_hkey too.
>
> > > + diff = cur->bc_ops->key_diff(cur, &rec_key);
> > > + if (diff > 0)
> > > + break;
> > > +
> > > + /* Callback */
> > > + error = fn(cur, recp, priv);
> > > + if (error < 0 || error == XFS_BTREE_QUERY_RANGE_ABORT)
> > > + break;
> > > +
> > > +advloop:
> > > + /* Move on to the next record. */
> > > + error = xfs_btree_increment(cur, 0, &stat);
> > > + if (error)
> > > + break;
> > > + }
> > > +
> > > +out:
> > > + return error;
> > > +}
> > > +
> > > +/*
> > > + * Query an overlapped interval btree for all records overlapping a given
> > > + * interval.
> > > + */
> >
> > Same comment here, can you elaborate on the search algorithm? Also, I
> > think an example or generic description of the rules around what records
> > this query returns (e.g., low_rec/high_rec vs. record low/high keys)
> > would be useful, particularly since I, at least, don't have much context
> > on the rmap+reflink scenarios quite yet.
>
> Let's say you have a bunch of (overlapped) rmap records:
>
> 1: +- file A startblock B offset C length D -----------+
> 2: +- file E startblock F offset G length H --------------+
> 3: +- file I startblock F offset J length K --+
> 4: +- file L... --+
>
> Now say we want to map block (B+D) into file A at offset (C+D). Ideally, we'd
> simply increment the length of record 1. But how do we find that record that
> ends at (B+D-1)? A LE lookup of (B+D-1) would return record 3 because the
> keys are ordered first by startblock. An interval query would return records
> 1 and 2 because they both overlap (B+D-1), and from that we can pick out
> record 1 as the appropriate left neighbor.
>
Great, thanks.. can you include this content in the comment above the
function as well?
Brian
> In the non-overlapped case you can do a LE lookup and decrement the cursor
> because a record's interval must end before the next record.
>
> > > +STATIC int
> > > +xfs_btree_overlapped_query_range(
> > > + struct xfs_btree_cur *cur,
> > > + union xfs_btree_irec *low_rec,
> > > + union xfs_btree_irec *high_rec,
> > > + xfs_btree_query_range_fn fn,
> > > + void *priv)
> > > +{
> > > + union xfs_btree_ptr ptr;
> > > + union xfs_btree_ptr *pp;
> > > + union xfs_btree_key rec_key;
> > > + union xfs_btree_key low_key;
> > > + union xfs_btree_key high_key;
> > > + union xfs_btree_key *lkp;
> > > + union xfs_btree_key *hkp;
> > > + union xfs_btree_rec rec;
> > > + union xfs_btree_rec *recp;
> > > + struct xfs_btree_block *block;
> > > + __int64_t ldiff;
> > > + __int64_t hdiff;
> > > + int level;
> > > + struct xfs_buf *bp;
> > > + int i;
> > > + int error;
> > > +
> > > + /* Find the keys of both ends of the interval. */
> > > + cur->bc_rec = *high_rec;
> > > + cur->bc_ops->init_rec_from_cur(cur, &rec);
> > > + cur->bc_ops->init_key_from_rec(&high_key, &rec);
> > > +
> > > + cur->bc_rec = *low_rec;
> > > + cur->bc_ops->init_rec_from_cur(cur, &rec);
> > > + cur->bc_ops->init_key_from_rec(&low_key, &rec);
> > > +
> > > + /* Load the root of the btree. */
> > > + level = cur->bc_nlevels - 1;
> > > + cur->bc_ops->init_ptr_from_cur(cur, &ptr);
> > > + error = xfs_btree_lookup_get_block(cur, level, &ptr, &block);
> > > + if (error)
> > > + return error;
> > > + xfs_btree_get_block(cur, level, &bp);
> > > + trace_xfs_btree_overlapped_query_range(cur, level, bp);
> > > +#ifdef DEBUG
> > > + error = xfs_btree_check_block(cur, block, level, bp);
> > > + if (error)
> > > + goto out;
> > > +#endif
> > > + cur->bc_ptrs[level] = 1;
> > > +
> > > + while (level < cur->bc_nlevels) {
> > > + block = XFS_BUF_TO_BLOCK(cur->bc_bufs[level]);
> > > +
> > > + if (level == 0) {
> > > + /* End of leaf, pop back towards the root. */
> > > + if (cur->bc_ptrs[level] >
> > > + be16_to_cpu(block->bb_numrecs)) {
> > > +leaf_pop_up:
> > > + if (level < cur->bc_nlevels - 1)
> > > + cur->bc_ptrs[level + 1]++;
> > > + level++;
> > > + continue;
> > > + }
> > > +
> > > + recp = xfs_btree_rec_addr(cur, cur->bc_ptrs[0], block);
> > > +
> > > + cur->bc_ops->init_high_key_from_rec(&rec_key, recp);
> > > + ldiff = cur->bc_ops->diff_two_keys(cur, &low_key,
> > > + &rec_key);
> > > +
> > > + cur->bc_ops->init_key_from_rec(&rec_key, recp);
> > > + hdiff = cur->bc_ops->diff_two_keys(cur, &rec_key,
> > > + &high_key);
> > > +
> >
> > This looked a little funny to me because I expected diff_two_keys() to
> > basically be param1 - param2. Looking ahead at the rmapbt code, it is in
> > fact the other way around. I'm not sure we have precedent for either
> > way, tbh. I still have to stare at this some more, but I wonder if a
> > "does record overlap" helper (with comments) would help clean this up a
> > bit.
>
> You're correct this is exactly the opposite of the compare functions in
> the C library and the rest of the kernel. I'll fix that up.
>
> > > + /* If the record matches, callback */
> > > + if (ldiff >= 0 && hdiff >= 0) {
>
> Ok, I'll make it a little clearer what we're testing here:
>
> /*
> * If (record's high key >= query's low key) and
> * (query's high key >= record's low key), then
> * this record overlaps the query range, so callback.
> */
>
>
> > > + error = fn(cur, recp, priv);
> > > + if (error < 0 ||
> > > + error == XFS_BTREE_QUERY_RANGE_ABORT)
> > > + break;
> > > + } else if (hdiff < 0) {
> > > + /* Record is larger than high key; pop. */
> > > + goto leaf_pop_up;
> > > + }
> > > + cur->bc_ptrs[level]++;
> > > + continue;
> > > + }
> > > +
> > > + /* End of node, pop back towards the root. */
> > > + if (cur->bc_ptrs[level] > be16_to_cpu(block->bb_numrecs)) {
> > > +node_pop_up:
> > > + if (level < cur->bc_nlevels - 1)
> > > + cur->bc_ptrs[level + 1]++;
> > > + level++;
> > > + continue;
> >
> > Looks like same code as leaf_pop_up. I wonder if we can bury this at the
> > end of the loop with a common label.
>
> Yep.
>
> > > + }
> > > +
> > > + lkp = xfs_btree_key_addr(cur, cur->bc_ptrs[level], block);
> > > + hkp = xfs_btree_high_key_addr(cur, cur->bc_ptrs[level], block);
> > > + pp = xfs_btree_ptr_addr(cur, cur->bc_ptrs[level], block);
> > > +
> > > + ldiff = cur->bc_ops->diff_two_keys(cur, &low_key, hkp);
> > > + hdiff = cur->bc_ops->diff_two_keys(cur, lkp, &high_key);
> > > +
> > > + /* If the key matches, drill another level deeper. */
> > > + if (ldiff >= 0 && hdiff >= 0) {
> > > + level--;
> > > + error = xfs_btree_lookup_get_block(cur, level, pp,
> > > + &block);
> > > + if (error)
> > > + goto out;
> > > + xfs_btree_get_block(cur, level, &bp);
> > > + trace_xfs_btree_overlapped_query_range(cur, level, bp);
> > > +#ifdef DEBUG
> > > + error = xfs_btree_check_block(cur, block, level, bp);
> > > + if (error)
> > > + goto out;
> > > +#endif
> > > + cur->bc_ptrs[level] = 1;
> > > + continue;
> > > + } else if (hdiff < 0) {
> > > + /* The low key is larger than the upper range; pop. */
> > > + goto node_pop_up;
> > > + }
> > > + cur->bc_ptrs[level]++;
> > > + }
> > > +
> > > +out:
> > > + /*
> > > + * If we don't end this function with the cursor pointing at a record
> > > + * block, a subsequent non-error cursor deletion will not release
> > > + * node-level buffers, causing a buffer leak. This is quite possible
> > > + * with a zero-results range query, so release the buffers if we
> > > + * failed to return any results.
> > > + */
> > > + if (cur->bc_bufs[0] == NULL) {
> > > + for (i = 0; i < cur->bc_nlevels; i++) {
> > > + if (cur->bc_bufs[i]) {
> > > + xfs_trans_brelse(cur->bc_tp, cur->bc_bufs[i]);
> > > + cur->bc_bufs[i] = NULL;
> > > + cur->bc_ptrs[i] = 0;
> > > + cur->bc_ra[i] = 0;
> > > + }
> > > + }
> > > + }
> > > +
> > > + return error;
> > > +}
> > > +
> > > +/*
> > > + * Query a btree for all records overlapping a given interval of keys. The
> > > + * supplied function will be called with each record found; return one of the
> > > + * XFS_BTREE_QUERY_RANGE_{CONTINUE,ABORT} values or the usual negative error
> > > + * code. This function returns XFS_BTREE_QUERY_RANGE_ABORT, zero, or a
> > > + * negative error code.
> > > + */
> > > +int
> > > +xfs_btree_query_range(
> > > + struct xfs_btree_cur *cur,
> > > + union xfs_btree_irec *low_rec,
> > > + union xfs_btree_irec *high_rec,
> > > + xfs_btree_query_range_fn fn,
> > > + void *priv)
> > > +{
> > > + if (!(cur->bc_ops->flags & XFS_BTREE_OPS_OVERLAPPING))
> > > + return xfs_btree_simple_query_range(cur, low_rec,
> > > + high_rec, fn, priv);
> > > + return xfs_btree_overlapped_query_range(cur, low_rec, high_rec,
> > > + fn, priv);
> > > +}
> > > diff --git a/fs/xfs/libxfs/xfs_btree.h b/fs/xfs/libxfs/xfs_btree.h
> > > index a5ec6c7..898fee5 100644
> > > --- a/fs/xfs/libxfs/xfs_btree.h
> > > +++ b/fs/xfs/libxfs/xfs_btree.h
> > > @@ -206,6 +206,12 @@ struct xfs_btree_ops {
> > > #define LASTREC_DELREC 2
> > >
> > >
> > > +union xfs_btree_irec {
> > > + xfs_alloc_rec_incore_t a;
> > > + xfs_bmbt_irec_t b;
> > > + xfs_inobt_rec_incore_t i;
> > > +};
> > > +
> >
> > We might as well kill off the typedef usage here.
>
> Ok. Thx for the review!
>
> --D
>
> >
> > Brian
> >
> > > /*
> > > * Btree cursor structure.
> > > * This collects all information needed by the btree code in one place.
> > > @@ -216,11 +222,7 @@ typedef struct xfs_btree_cur
> > > struct xfs_mount *bc_mp; /* file system mount struct */
> > > const struct xfs_btree_ops *bc_ops;
> > > uint bc_flags; /* btree features - below */
> > > - union {
> > > - xfs_alloc_rec_incore_t a;
> > > - xfs_bmbt_irec_t b;
> > > - xfs_inobt_rec_incore_t i;
> > > - } bc_rec; /* current insert/search record value */
> > > + union xfs_btree_irec bc_rec; /* current insert/search record value */
> > > struct xfs_buf *bc_bufs[XFS_BTREE_MAXLEVELS]; /* buf ptr per level */
> > > int bc_ptrs[XFS_BTREE_MAXLEVELS]; /* key/record # */
> > > __uint8_t bc_ra[XFS_BTREE_MAXLEVELS]; /* readahead bits */
> > > @@ -494,4 +496,14 @@ xfs_extlen_t xfs_btree_calc_size(struct xfs_mount *mp, uint *limits,
> > > uint xfs_btree_compute_maxlevels(struct xfs_mount *mp, uint *limits,
> > > unsigned long len);
> > >
> > > +/* return codes */
> > > +#define XFS_BTREE_QUERY_RANGE_CONTINUE 0 /* keep iterating */
> > > +#define XFS_BTREE_QUERY_RANGE_ABORT 1 /* stop iterating */
> > > +typedef int (*xfs_btree_query_range_fn)(struct xfs_btree_cur *cur,
> > > + union xfs_btree_rec *rec, void *priv);
> > > +
> > > +int xfs_btree_query_range(struct xfs_btree_cur *cur,
> > > + union xfs_btree_irec *low_rec, union xfs_btree_irec *high_rec,
> > > + xfs_btree_query_range_fn fn, void *priv);
> > > +
> > > #endif /* __XFS_BTREE_H__ */
> > > diff --git a/fs/xfs/xfs_trace.h b/fs/xfs/xfs_trace.h
> > > index ffea28c..f0ac9c9 100644
> > > --- a/fs/xfs/xfs_trace.h
> > > +++ b/fs/xfs/xfs_trace.h
> > > @@ -2218,6 +2218,7 @@ DEFINE_EVENT(xfs_btree_cur_class, name, \
> > > TP_PROTO(struct xfs_btree_cur *cur, int level, struct xfs_buf *bp), \
> > > TP_ARGS(cur, level, bp))
> > > DEFINE_BTREE_CUR_EVENT(xfs_btree_updkeys);
> > > +DEFINE_BTREE_CUR_EVENT(xfs_btree_overlapped_query_range);
> > >
> > > #endif /* _TRACE_XFS_H */
> > >
> > >
> > > _______________________________________________
> > > xfs mailing list
> > > xfs at oss.sgi.com
> > > http://oss.sgi.com/mailman/listinfo/xfs
>
> _______________________________________________
> xfs mailing list
> xfs at oss.sgi.com
> http://oss.sgi.com/mailman/listinfo/xfs
More information about the xfs
mailing list