weird quota issue
Weber, Charles (NIH/NIA/IRP) [C]
weberc at grc.nia.nih.gov
Mon Dec 22 16:13:06 CST 2014
Thanks for replying. The project part is a red herring and I have abandoned it. The only reason project quotas even came up was the winbind/quota issue. UID is fine.
The more interesting part is the way the /proc/self/mounts and mtab/fstab are not coherent.
2 filesystems have identical (cut and paste) setting in fstab. Below results are after setting forcefsck and rebooting.
mount <enter>
/dev/mapper/irphome_vg-home_lv on /home type xfs (rw,delaylog,inode64,nobarrier,logbsize=256k,uquota,prjquota)
/dev/mapper/irphome_vg-imap_lv on /mail type xfs (rw,delaylog,inode64,nobarrier,logbsize=256k,uquota,prjquota)
cat /proc/self/mounts
/dev/mapper/irphome_vg-home_lv /home xfs rw,relatime,attr2,delaylog,nobarrier,inode64,logbsize=256k,sunit=32,swidth=32768,noquota 0 0
/dev/mapper/irphome_vg-imap_lv /mail xfs rw,relatime,attr2,delaylog,nobarrier,inode64,logbsize=256k,sunit=32,swidth=32768,usrquota,prjquota 0 0
cat /etc/mtab
/dev/mapper/irphome_vg-home_lv /home xfs rw,delaylog,inode64,nobarrier,logbsize=256k,uquota,prjquota 0 0
/dev/mapper/irphome_vg-imap_lv /mail xfs rw,delaylog,inode64,nobarrier,logbsize=256k,uquota,prjquota 0 0
List of details per wiki
#############
The most interesting thing in dmesg output was this:
XFS (dm-7): Failed to initialize disk quotas. from /dev/disk/by-id dm-7 is my problem logical volume => dm-name-irphome_vg-home_lv -> ../../dm-7
#############
2.6.32-504.3.3.el6.x86_64
xfs_repair version 3.1.1
24 cpu using hyperthreading, so 12 real
mem
MemTotal: 49410148 kB
MemFree: 269628 kB
Buffers: 144256 kB
Cached: 47388884 kB
SwapCached: 0 kB
Active: 731016 kB
Inactive: 46871512 kB
Active(anon): 2976 kB
Inactive(anon): 71740 kB
Active(file): 728040 kB
Inactive(file): 46799772 kB
Unevictable: 5092 kB
Mlocked: 5092 kB
SwapTotal: 14331900 kB
SwapFree: 14331900 kB
Dirty: 3773708 kB
Writeback: 0 kB
AnonPages: 75696 kB
Mapped: 190092 kB
Shmem: 312 kB
Slab: 1012580 kB
SReclaimable: 875160 kB
SUnreclaim: 137420 kB
KernelStack: 5512 kB
PageTables: 9332 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 39036972 kB
Committed_AS: 293324 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 191424 kB
VmallocChunk: 34334431824 kB
HardwareCorrupted: 0 kB
AnonHugePages: 2048 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
DirectMap4k: 6384 kB
DirectMap2M: 2080768 kB
DirectMap1G: 48234496 kB
/proc/mounts
rootfs / rootfs rw 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
devtmpfs /dev devtmpfs rw,relatime,size=24689396k,nr_inodes=6172349,mode=755 0 0
devpts /dev/pts devpts rw,relatime,gid=5,mode=620,ptmxmode=000 0 0
tmpfs /dev/shm tmpfs rw,relatime 0 0
/dev/mapper/VolGroup-lv_root / ext4 rw,relatime,barrier=1,data=ordered 0 0
/proc/bus/usb /proc/bus/usb usbfs rw,relatime 0 0
/dev/sda1 /boot ext4 rw,relatime,barrier=1,data=ordered 0 0
/dev/mapper/irphome_vg-home_lv /home xfs rw,relatime,attr2,delaylog,nobarrier,inode64,logbsize=256k,sunit=32,swidth=32768,noquota 0 0
/dev/mapper/irphome_vg-imap_lv /mail xfs rw,relatime,attr2,delaylog,nobarrier,inode64,logbsize=256k,sunit=32,swidth=32768,usrquota,prjquota 0 0
none /proc/sys/fs/binfmt_misc binfmt_misc rw,relatime 0 0
/dev/mapper/homesavelv-homesavelv /homesave xfs rw,relatime,attr2,delaylog,sunit=32,swidth=32768,noquota 0 0
/proc/partitions
major minor #blocks name
8 0 143338560 sda
8 1 512000 sda1
8 2 142825472 sda2
8 32 17179869184 sdc
8 96 17179869184 sdg
8 128 17179869184 sdi
8 48 17179869184 sdd
8 112 17179869184 sdh
8 64 17179869184 sde
253 0 52428800 dm-0
253 1 14331904 dm-1
8 160 17179869184 sdk
8 176 17179869184 sdl
8 192 17179869184 sdm
8 224 17179869184 sdo
8 240 17179869184 sdp
65 0 17179869184 sdq
253 3 17179869184 dm-3
253 4 17179869184 dm-4
253 5 17179869184 dm-5
253 6 5368709120 dm-6
253 7 42949672960 dm-7
8 16 2147483648 sdb
8 80 2147483648 sdf
253 2 2147483648 dm-2
8 144 2147483648 sdj
8 208 2147483648 sdn
253 8 2147467264 dm-8
Raid layout
3Par SAN raid 6 12 4TB SAS disks (more or less, 3Par does some non-classic raid stuff)
mpathd (360002ac000000000000000080000bf12) dm-4 3PARdata,VV
size=16T features='0' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=1 status=active
|- 1:0:3:12 sdi 8:128 active ready running
|- 2:0:0:12 sdm 8:192 active ready running
|- 1:0:2:12 sde 8:64 active ready running
`- 2:0:5:12 sdq 65:0 active ready running
mpathc (360002ac000000000000000070000bf12) dm-5 3PARdata,VV
size=16T features='0' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=1 status=active
|- 1:0:2:11 sdd 8:48 active ready running
|- 2:0:0:11 sdl 8:176 active ready running
|- 1:0:3:11 sdh 8:112 active ready running
`- 2:0:5:11 sdp 8:240 active ready running
mpathb (360002ac000000000000000060000bf12) dm-3 3PARdata,VV
size=16T features='0' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=1 status=active
|- 1:0:2:10 sdc 8:32 active ready running
|- 2:0:0:10 sdk 8:160 active ready running
|- 1:0:3:10 sdg 8:96 active ready running
`- 2:0:5:10 sdo 8:224 active ready running
mpathg (360002ac000000000000000110000bf12) dm-2 3PARdata,VV
size=2.0T features='0' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=1 status=active
|- 1:0:2:1 sdb 8:16 active ready running
|- 2:0:5:1 sdj 8:144 active ready running
|- 1:0:3:1 sdf 8:80 active ready running
`- 2:0:0:1 sdn 8:208 active ready running
pvscan
PV /dev/mapper/mpathd VG irphome_vg lvm2 [16.00 TiB / 3.00 TiB free]
PV /dev/mapper/mpathb VG irphome_vg lvm2 [16.00 TiB / 0 free]
PV /dev/mapper/mpathc VG irphome_vg lvm2 [16.00 TiB / 0 free]
PV /dev/mapper/mpathg VG homesavelv lvm2 [2.00 TiB / 0 free]
PV /dev/sda2 VG VolGroup lvm2 [136.21 GiB / 72.54 GiB free]
Total: 5 [50.13 TiB] / in use: 5 [50.13 TiB] / in no VG: 0 [0 ]
vgscan
Reading all physical volumes. This may take a while...
Found volume group "irphome_vg" using metadata type lvm2
Found volume group "homesavelv" using metadata type lvm2
Found volume group "VolGroup" using metadata type lvm2
lvscan
ACTIVE '/dev/irphome_vg/imap_lv' [5.00 TiB] inherit
ACTIVE '/dev/irphome_vg/home_lv' [40.00 TiB] inherit
ACTIVE '/dev/homesavelv/homesavelv' [2.00 TiB] inherit
ACTIVE '/dev/VolGroup/lv_root' [50.00 GiB] inherit
ACTIVE '/dev/VolGroup/lv_swap' [13.67 GiB] inherit
lvdisplay irphome_vg/home_lv
--- Logical volume ---
LV Path /dev/irphome_vg/home_lv
LV Name home_lv
VG Name irphome_vg
LV UUID 8wLM12-e43p-UhIh-YTXn-kMBx-RffN-yNz2V5
LV Write Access read/write
LV Creation host, time nuhome.irp.nia.nih.gov <http://nuhome.irp.nia.nih.gov/>, 2014-12-01 17:53:47 -0500
LV Status available
# open 1
LV Size 40.00 TiB
Current LE 10485760
Segments 3
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:7
Disks, write cache etc are controlled by 3Par SAN, I just define up to 16TB blocks and export to host over FC or ISCSI.
In this case I am using FC.
xfs_info /dev/irphome_vg/home_lv
meta-data=/dev/mapper/irphome_vg-home_lv isize=256 agcount=40, agsize=268435452 blks
= sectsz=512 attr=2, projid32bit=1
data = bsize=4096 blocks=10737418080, imaxpct=5
= sunit=4 swidth=4096 blks
naming =version 2 bsize=4096 ascii-ci=0
log =internal bsize=4096 blocks=521728, version=2
= sectsz=512 sunit=4 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
xfs_info /dev/irphome_vg/imap_lv
meta-data=/dev/mapper/irphome_vg-imap_lv isize=256 agcount=32, agsize=41943036 blks
= sectsz=512 attr=2, projid32bit=1
data = bsize=4096 blocks=1342177152, imaxpct=5
= sunit=4 swidth=4096 blks
naming =version 2 bsize=4096 ascii-ci=0
log =internal bsize=4096 blocks=521728, version=2
= sectsz=512 sunit=4 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
dmesg output
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS (dm-7): delaylog is the default now, option is deprecated.
XFS (dm-7): Mounting Filesystem
XFS (dm-7): Ending clean mount
XFS (dm-7): Failed to initialize disk quotas.
XFS (dm-6): delaylog is the default now, option is deprecated.
XFS (dm-6): Mounting Filesystem
XFS (dm-6): Ending clean mount
scsi 2:0:0:0: Direct-Access 3PARdata VV 3210 PQ: 0 ANSI: 6
scsi 2:0:0:10: Direct-Access 3PARdata VV 3210 PQ: 0 ANSI: 6
sd 2:0:0:0: [sdj] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)
scsi 2:0:0:11: Direct-Access 3PARdata VV 3210 PQ: 0 ANSI: 6
sd 2:0:0:10: [sdk] 34359738368 512-byte logical blocks: (17.5 TB/16.0 TiB)
sd 2:0:0:0: [sdj] Write Protect is off
sd 2:0:0:0: [sdj] Mode Sense: 8b 00 10 08
scsi 2:0:0:12: Direct-Access 3PARdata VV 3210 PQ: 0 ANSI: 6
sd 2:0:0:11: [sdl] 34359738368 512-byte logical blocks: (17.5 TB/16.0 TiB)
sd 2:0:0:0: [sdj] Write cache: disabled, read cache: enabled, supports DPO and FUA
scsi 2:0:0:254: Enclosure 3PARdata SES 3210 PQ: 0 ANSI: 6
sd 2:0:0:12: [sdm] 34359738368 512-byte logical blocks: (17.5 TB/16.0 TiB)
scsi 2:0:1:0: RAID HP HSV400 0005 PQ: 0 ANSI: 5
scsi 2:0:2:0: RAID HP HSV400 0005 PQ: 0 ANSI: 5
sdj:
sd 2:0:0:10: [sdk] Write Protect is off
sd 2:0:0:10: [sdk] Mode Sense: 8b 00 10 08
sd 2:0:0:11: [sdl] Write Protect is off
sd 2:0:0:11: [sdl] Mode Sense: 8b 00 10 08
scsi 2:0:3:0: RAID HP HSV400 0005 PQ: 0 ANSI: 5
unknown partition table
sd 2:0:0:10: [sdk] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 2:0:0:11: [sdl] Write cache: disabled, read cache: enabled, supports DPO and FUA
scsi 2:0:4:0: RAID HP HSV400 0005 PQ: 0 ANSI: 5
sd 2:0:0:12: [sdm] Write Protect is off
sd 2:0:0:12: [sdm] Mode Sense: 8b 00 10 08
sd 2:0:0:12: [sdm] Write cache: disabled, read cache: enabled, supports DPO and FUA
scsi 2:0:5:0: Direct-Access 3PARdata VV 3210 PQ: 0 ANSI: 6
sd 2:0:5:0: [sdn] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)
scsi 2:0:5:10: Direct-Access 3PARdata VV 3210 PQ: 0 ANSI: 6
sd 2:0:0:0: [sdj] Attached SCSI disk
scsi 2:0:5:11: Direct-Access 3PARdata VV 3210 PQ: 0 ANSI: 6
sd 2:0:5:0: [sdn] Write Protect is off
sd 2:0:5:0: [sdn] Mode Sense: 8b 00 10 08
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS (dm-7): delaylog is the default now, option is deprecated.
XFS (dm-7): Mounting Filesystem
XFS (dm-7): Ending clean mount
XFS (dm-7): Failed to initialize disk quotas.
XFS (dm-6): delaylog is the default now, option is deprecated.
XFS (dm-6): Mounting Filesystem
XFS (dm-6): Ending clean mount
Adding 14331900k swap on /dev/mapper/VolGroup-lv_swap. Priority:-1 extents:1 across:14331900k
device-mapper: table: 253:9: multipath: error getting device
device-mapper: ioctl: error adding target to table
pcc-cpufreq: (v1.00.00) driver loaded with frequency limits: 1600 MHz, 2400 MHz
sd 1:0:2:10: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatic
ally remap LUN assignments.
sd 2:0:0:10: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatic
ally remap LUN assignments.
sd 1:0:3:10: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatic
ally remap LUN assignments.
sd 2:0:5:10: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatic
ally remap LUN assignments.
device-mapper: multipath: Failing path 8:80.
device-mapper: multipath: Failing path 8:208.
device-mapper: multipath: Failing path 8:144.
end_request: I/O error, dev dm-2, sector 4194176
Buffer I/O error on device dm-2, logical block 524272
end_request: I/O error, dev dm-2, sector 4194176
Buffer I/O error on device dm-2, logical block 524272
end_request: I/O error, dev dm-2, sector 4194288
Buffer I/O error on device dm-2, logical block 524286
end_request: I/O error, dev dm-2, sector 4194288
Buffer I/O error on device dm-2, logical block 524286
end_request: I/O error, dev dm-2, sector 0
Buffer I/O error on device dm-2, logical block 0
end_request: I/O error, dev dm-2, sector 0
Buffer I/O error on device dm-2, logical block 0
end_request: I/O error, dev dm-2, sector 8
Buffer I/O error on device dm-2, logical block 1
end_request: I/O error, dev dm-2, sector 4194296
Buffer I/O error on device dm-2, logical block 524287
end_request: I/O error, dev dm-2, sector 4194296
Buffer I/O error on device dm-2, logical block 524287
end_request: I/O error, dev dm-2, sector 4194296
device-mapper: table: 253:2: multipath: error getting device
device-mapper: ioctl: error adding target to table
device-mapper: table: 253:2: multipath: error getting device
device-mapper: ioctl: error adding target to table
sd 1:0:3:10: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
sd 1:0:2:10: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
sd 2:0:5:10: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
sd 2:0:0:10: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
scsi 1:0:2:1: Direct-Access 3PARdata VV 3210 PQ: 0 ANSI: 6
sd 1:0:2:1: Attached scsi generic sg4 type 0
sd 1:0:2:1: [sdb] 4294967296 512-byte logical blocks: (2.19 TB/2.00 TiB)
scsi 1:0:3:1: Direct-Access 3PARdata VV 3210 PQ: 0 ANSI: 6
sd 1:0:3:1: Attached scsi generic sg9 type 0
sd 1:0:3:1: [sdf] 4294967296 512-byte logical blocks: (2.19 TB/2.00 TiB)
sd 1:0:2:1: [sdb] Write Protect is off
sd 1:0:2:1: [sdb] Mode Sense: 8b 00 10 08
sd 1:0:2:1: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 1:0:3:1: [sdf] Write Protect is off
sd 1:0:3:1: [sdf] Mode Sense: 8b 00 10 08
sd 1:0:3:1: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA
sdb: unknown partition table
sdf: unknown partition table
sd 1:0:2:1: [sdb] Attached SCSI disk
sd 1:0:3:1: [sdf] Attached SCSI disk
scsi 2:0:5:1: Direct-Access 3PARdata VV 3210 PQ: 0 ANSI: 6
sd 2:0:5:1: Attached scsi generic sg16 type 0
sd 2:0:5:1: [sdj] 4294967296 512-byte logical blocks: (2.19 TB/2.00 TiB)
scsi 2:0:0:1: Direct-Access 3PARdata VV 3210 PQ: 0 ANSI: 6
sd 2:0:0:1: Attached scsi generic sg25 type 0
sd 2:0:0:1: [sdn] 4294967296 512-byte logical blocks: (2.19 TB/2.00 TiB)
sd 2:0:5:1: [sdj] Write Protect is off
sd 2:0:5:1: [sdj] Mode Sense: 8b 00 10 08
sd 2:0:5:1: [sdj] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 2:0:0:1: [sdn] Write Protect is off
sd 2:0:0:1: [sdn] Mode Sense: 8b 00 10 08
sd 2:0:0:1: [sdn] Write cache: disabled, read cache: enabled, supports DPO and FUA
sdj: unknown partition table
sdn: unknown partition table
sd 2:0:5:1: [sdj] Attached SCSI disk
sd 2:0:0:1: [sdn] Attached SCSI disk
XFS (dm-8): Mounting Filesystem
XFS (dm-8): Ending clean mount
sd 1:0:2:10: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
sd 1:0:3:10: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
sd 2:0:5:10: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
sd 2:0:0:10: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
rport-2:0-17: blocked FC remote port time out: removing rport
rport-2:0-2: blocked FC remote port time out: removing rport
> On Dec 22, 2014, at 3:48 PM, Dave Chinner <david at fromorbit.com> wrote:
>
> On Fri, Dec 19, 2014 at 09:26:12PM +0000, Weber, Charles (NIH/NIA/IRP) [E] wrote:
>> HI everyone, long time xfs/quota user with new server and problem
>> hardware is HP BL460 G7 blade, qlogic fiber channel and 3Par 7200 storage
>> 3 16TB vols exported from 3Par to server via FC. These are thin volumes, but plenty of available backing storage.
>>
>> Server runs current patched CentOS 6.6
>> kernel 2.6.32-504.3.3.el6.x86_64
>> xfsprogs 2.1.1-16.el6
>> Default mkfs.xfs options for volumes
>>
>> mount options for logical volumes home_lv 39TB imap_lv 4.6TB
>> /dev/mapper/irphome_vg-home_lv on /home type xfs (rw,delaylog,inode64,nobarrier,logbsize=256k,uquota,prjquota)
>> /dev/mapper/irphome_vg-imap_lv on /mail type xfs (rw,delaylog,inode64,nobarrier,logbsize=256k,uquota,prjquota)
>>
>> Users are from large AD via winbind set to not enumerate. I saw
>> the bug with xfs_quota report not listing winbind defined user
>> names. Yes this happens to me.
>
> So just enumerate them by uid. (report -un)
>
>> I can assign project quota to smaller volume. xfs_quota will not
>> report it. I cannot assign a project quota to larger volume. I get
>> this error: xfs_quota: cannot set limits: Function not
>> implemented.
>
> You need to be more specific and document all your quota setup.
>
> http://xfs.org/index.php/XFS_FAQ#Q:_What_information_should_I_include_when_reporting_a_problem.3F
>
>> xfs_quota -x -c 'report -uh' /mail
>> User quota on /mail (/dev/mapper/irphome_vg-imap_lv)
>> Blocks
>> User ID Used Soft Hard Warn/Grace
>> ---------- ---------------------------------
>> root 2.2G 0 0 00 [------]
>>
>> [xfs_quota -x -c 'report -uh' /home
>>
>> nothing is returned
>>
>> I can set user and project quotas on /mail but cannot see them. I have not tested them yet.
>> I cannot set user or project quotas on /home.
>> At one time I could definitely set usr quotas on /home. I did so and verified it worked.
>>
>> Any ideas what is messed up on the /home volume?
>
> Not without knowing a bunch more about your project quota setup.
>
> Cheers,
>
> Dave.
> --
> Dave Chinner
> david at fromorbit.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://oss.sgi.com/pipermail/xfs/attachments/20141222/89c46d96/attachment-0001.html>
More information about the xfs
mailing list