[PATCH v3] xfstests: remove fio config files after finished test
Zheng Liu
gnehzuil.liu at gmail.com
Sun May 12 03:21:24 CDT 2013
From: Zheng Liu <wenqing.lz at taobao.com>
After finished test, temporarily fio config file should be removed.
This commit tries to fix this problem in the following test cases:
- generic/299-300
- ext4/301-304
- shared/305
Signed-off-by: Zheng Liu <wenqing.lz at taobao.com>
Cc: Eric Sandeen <sandeen at sandeen.net>
Cc: Dave Chinner <david at fromorbit.com>
---
changelog:
* rebase against the latest master branch of xfstests tree.
tests/ext4/301 | 9 +++++----
tests/ext4/302 | 9 +++++----
tests/ext4/303 | 9 +++++----
tests/ext4/304 | 9 +++++----
tests/generic/299 | 9 +++++----
tests/generic/300 | 9 +++++----
tests/shared/305 | 10 ++++++----
7 files changed, 36 insertions(+), 28 deletions(-)
diff --git a/tests/ext4/301 b/tests/ext4/301
index e1583d4..0ca3622 100755
--- a/tests/ext4/301
+++ b/tests/ext4/301
@@ -28,6 +28,7 @@ echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
+fio_config=$tmp.fio
status=1 # failure is the default!
trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
@@ -49,7 +50,7 @@ BLK_DEV_SIZE=`blockdev --getsz $SCRATCH_DEV`
# reserve 30% in order to avoid ENOSPC
FILE_SIZE=$((BLK_DEV_SIZE * (512 / (2 + 1))))
-cat >$tmp-$seq.fio <<EOF
+cat >$fio_config <<EOF
# Common e4defrag regression tests
[global]
ioengine=ioe_e4defrag
@@ -101,11 +102,11 @@ _workout()
echo ""
echo " Start defragment activity"
echo ""
- cat $tmp-$seq.fio >> $seqres.full
- run_check $FIO_PROG $tmp-$seq.fio
+ cat $fio_config >> $seqres.full
+ run_check $FIO_PROG $fio_config
}
-_require_fio $tmp-$seq.fio
+_require_fio $fio_config
_scratch_mkfs >> $seqres.full 2>&1
_scratch_mount
diff --git a/tests/ext4/302 b/tests/ext4/302
index abca805..497f4c6 100755
--- a/tests/ext4/302
+++ b/tests/ext4/302
@@ -29,6 +29,7 @@ echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
+fio_config=$tmp.fio
status=1 # failure is the default!
trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
@@ -49,7 +50,7 @@ BLK_DEV_SIZE=`blockdev --getsz $SCRATCH_DEV`
# reserve 30% in order to avoid ENOSPC
FILE_SIZE=$((BLK_DEV_SIZE * (512 / (2 + 1))))
-cat >$tmp-$seq.fio <<EOF
+cat >$fio_config <<EOF
# Common e4defrag regression tests
[global]
ioengine=ioe_e4defrag
@@ -117,11 +118,11 @@ _workout()
echo ""
echo " Start defragment activity"
echo ""
- cat $tmp-$seq.fio >> $seqres.full
- run_check $FIO_PROG $tmp-$seq.fio
+ cat $fio_config >> $seqres.full
+ run_check $FIO_PROG $fio_config
}
-_require_fio $tmp-$seq.fio
+_require_fio $fio_config
_scratch_mkfs >> $seqres.full 2>&1
_scratch_mount
diff --git a/tests/ext4/303 b/tests/ext4/303
index 7051576..93354e5 100755
--- a/tests/ext4/303
+++ b/tests/ext4/303
@@ -29,6 +29,7 @@ echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
+fio_config=$tmp.fio
status=1 # failure is the default!
trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
@@ -49,7 +50,7 @@ BLK_DEV_SIZE=`blockdev --getsz $SCRATCH_DEV`
# Reserve space for 4 files in order to avoid ENOSPC
FILE_SIZE=$((BLK_DEV_SIZE * (512 / (3+1))))
-cat >$tmp-$seq.fio <<EOF
+cat >$fio_config <<EOF
# Common e4defrag regression tests
[global]
ioengine=ioe_e4defrag
@@ -127,11 +128,11 @@ _workout()
echo ""
echo " Start defragment activity"
echo ""
- cat $tmp-$seq.fio >> $seqres.full
- run_check $FIO_PROG $tmp-$seq.fio
+ cat $fio_config >> $seqres.full
+ run_check $FIO_PROG $fio_config
}
-_require_fio $tmp-$seq.fio
+_require_fio $fio_config
_scratch_mkfs >> $seqres.full 2>&1
_scratch_mount
diff --git a/tests/ext4/304 b/tests/ext4/304
index 5d15ecb..74e601a 100755
--- a/tests/ext4/304
+++ b/tests/ext4/304
@@ -30,6 +30,7 @@ echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
+fio_config=$tmp.fio
status=1 # failure is the default!
trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
@@ -50,7 +51,7 @@ BLK_DEV_SIZE=`blockdev --getsz $SCRATCH_DEV`
# reserve 30% in order to avoid ENOSPC
FILE_SIZE=$((BLK_DEV_SIZE * (512 / (2 + 1))))
-cat >$tmp-$seq.fio <<EOF
+cat >$fio_config <<EOF
# Common e4defrag regression tests
[global]
ioengine=ioe_e4defrag
@@ -104,11 +105,11 @@ _workout()
echo ""
echo " Start defragment activity"
echo ""
- cat $tmp-$seq.fio >> $seqres.full
- run_check $FIO_PROG $tmp-$seq.fio
+ cat $fio_config >> $seqres.full
+ run_check $FIO_PROG $fio_config
}
-_require_fio $tmp-$seq.fio
+_require_fio $fio_config
_scratch_mkfs >> $seqres.full 2>&1
_scratch_mount
diff --git a/tests/generic/299 b/tests/generic/299
index 5f3edc4..14cce96 100644
--- a/tests/generic/299
+++ b/tests/generic/299
@@ -30,6 +30,7 @@ echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
+fio_config=$tmp.fio
status=1 # failure is the default!
trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
@@ -47,7 +48,7 @@ NUM_JOBS=$((4*LOAD_FACTOR))
BLK_DEV_SIZE=`blockdev --getsz $SCRATCH_DEV`
FILE_SIZE=$((BLK_DEV_SIZE * 512))
-cat >$tmp-$seq.fio <<EOF
+cat >$fio_config <<EOF
###########
# $seq test fio activity
# Filenames derived from jobsname and jobid like follows:
@@ -108,15 +109,15 @@ rw=randrw
filename=buffered-aio-verifier
EOF
-_require_fio $tmp-$seq.fio
+_require_fio $fio_config
_workout()
{
echo ""
echo "Run fio with random aio-dio pattern"
echo ""
- cat $tmp-$seq.fio >> $seqres.full
- run_check $FIO_PROG $tmp-$seq.fio &
+ cat $fio_config >> $seqres.full
+ run_check $FIO_PROG $fio_config &
pid=$!
echo "Start fallocate/truncate loop"
diff --git a/tests/generic/300 b/tests/generic/300
index 687e62d..7c60728 100644
--- a/tests/generic/300
+++ b/tests/generic/300
@@ -30,6 +30,7 @@ echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
+fio_config=$tmp.fio
status=1 # failure is the default!
trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
@@ -51,7 +52,7 @@ then
fi
FS_SIZE=$((BLK_DEV_SIZE * 512))
-cat >$tmp-$seq.fio <<EOF
+cat >$fio_config <<EOF
###########
# $seq test fio activity
# Run DIO, fallocate and punch_hole threads on a single in parallel
@@ -128,11 +129,11 @@ _workout()
echo ""
echo "Run fio with random aio-dio pattern"
echo ""
- cat $tmp-$seq.fio >> $seqres.full
- run_check $FIO_PROG $tmp-$seq.fio
+ cat $fio_config >> $seqres.full
+ run_check $FIO_PROG $fio_config
}
-_require_fio $tmp-$seq.fio
+_require_fio $fio_config
_scratch_mkfs_sized $FS_SIZE >> $seqres.full 2>&1
_scratch_mount
diff --git a/tests/shared/305 b/tests/shared/305
index 91cbf03..8e8b0cb 100644
--- a/tests/shared/305
+++ b/tests/shared/305
@@ -29,6 +29,7 @@ echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
+fio_config=$tmp.fio
status=1 # failure is the default!
# get standard environment, filters and checks
@@ -79,6 +80,7 @@ _cleanup()
{
poweron_scratch_dev
disallow_fail_make_request
+ rm -f $tmp.*
}
trap "_cleanup; exit \$status" 1 2 3 15
@@ -87,7 +89,7 @@ NUM_JOBS=$((4*LOAD_FACTOR))
BLK_DEV_SIZE=`blockdev --getsz $SCRATCH_DEV`
FILE_SIZE=$((BLK_DEV_SIZE * 512))
-cat >$tmp-$seq.fio <<EOF
+cat >$fio_config <<EOF
###########
# $seq test's fio activity
# Filenames derived from jobsname and jobid like follows:
@@ -127,7 +129,7 @@ time_based
EOF
-_require_fio $tmp-$seq.fio
+_require_fio $fio_config
# Disable all sync operations to get higher load
FSSTRESS_AVOID="$FSSTRESS_AVOID -ffsync=0 -fsync=0 -ffdatasync=0 -f setattr=1"
@@ -143,8 +145,8 @@ _workout()
$FSSTRESS_PROG $args > /dev/null 2>&1 &
fs_pid=$!
echo "Start fio.."
- cat $tmp-$seq.fio >> $seqres.full
- $FIO_PROG $tmp-$seq.fio >> $seqres.full 2>&1 &
+ cat $fio_config >> $seqres.full
+ $FIO_PROG $fio_config >> $seqres.full 2>&1 &
fio_pid=$!
# Let's it work for awhile, and force device failure
--
1.7.12.rc2.18.g61b472e
More information about the xfs
mailing list