[PATCH 1/2] xfs: Remove XFS_MOUNT_RETERR
Jeff Liu
jeff.liu at oracle.com
Thu May 2 01:55:08 CDT 2013
On 05/02/2013 09:12 AM, Dave Chinner wrote:
> On Wed, May 01, 2013 at 10:25:13PM +0800, Jeff Liu wrote:
>> From: Jie Liu <jeff.liu at oracle.com>
>>
>> XFS_MOUNT_RETERR is going to be set at xfs_parseargs() if
>> mp->m_dalign is enabled, so any time we enter "if (mp->m_dalign)"
>> branch in xfs_update_alignment(), XFS_MOUNT_RETERR is set and
>> so we always be emitting a warning and returning an error.
>>
>> Hence, we can remove it and get rid of a couple of redundant
>> check up against it at xfs_upate_alignment().
>>
>> Thanks Dave Chinner for the confirmation.
>>
>> Signed-off-by: Jie Liu <jeff.liu at oracle.com>
>> Cc: Dave Chinner <dchinner at redhat.com>
>> Cc: Mark Tinguely <tinguely at sgi.com>
>> ---
>> fs/xfs/xfs_mount.c | 39 ++++++++++++---------------------------
>> fs/xfs/xfs_mount.h | 2 --
>> fs/xfs/xfs_super.c | 5 +----
>> 3 files changed, 13 insertions(+), 33 deletions(-)
>>
>> diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
>> index 3806088..29e8de8 100644
>> --- a/fs/xfs/xfs_mount.c
>> +++ b/fs/xfs/xfs_mount.c
>> @@ -872,42 +872,27 @@ xfs_update_alignment(xfs_mount_t *mp)
>> */
>> if ((BBTOB(mp->m_dalign) & mp->m_blockmask) ||
>> (BBTOB(mp->m_swidth) & mp->m_blockmask)) {
>> - if (mp->m_flags & XFS_MOUNT_RETERR) {
>> - xfs_warn(mp, "alignment check failed: "
>> - "(sunit/swidth vs. blocksize)");
>> - return XFS_ERROR(EINVAL);
>> - }
>> - mp->m_dalign = mp->m_swidth = 0;
>> + xfs_warn(mp, "alignment check failed: "
>> + "(sunit/swidth vs. blocksize)");
>
> Let's convert these format strings to a single line at the same
> time and be consistent with output. ie:
>
> xfs_warn(mp,
> "alignment check failed: sunit/swidth vs. blocksize(%d)",
> sbp->sb_blocksize);
Ok.
>
>> + return XFS_ERROR(EINVAL);
>> } else {
>> /*
>> * Convert the stripe unit and width to FSBs.
>> */
>> mp->m_dalign = XFS_BB_TO_FSBT(mp, mp->m_dalign);
>> if (mp->m_dalign && (sbp->sb_agblocks % mp->m_dalign)) {
>> - if (mp->m_flags & XFS_MOUNT_RETERR) {
>> - xfs_warn(mp, "alignment check failed: "
>> - "(sunit/swidth vs. ag size)");
>> - return XFS_ERROR(EINVAL);
>> - }
>> - xfs_warn(mp,
>> - "stripe alignment turned off: sunit(%d)/swidth(%d) "
>> - "incompatible with agsize(%d)",
>> - mp->m_dalign, mp->m_swidth,
>> - sbp->sb_agblocks);
>> -
>> - mp->m_dalign = 0;
>> - mp->m_swidth = 0;
>> + xfs_warn(mp, "alignment check failed: "
>> + "sunit(%d)/swidth(%d) incompatible with agsize(%d)",
>
> "alignment check failed: sunit/swidth vs. agsize(%d)",
> sbp->sb_agblocks);
>
>> + mp->m_dalign, mp->m_swidth,
>> + sbp->sb_agblocks);
>> + return XFS_ERROR(EINVAL);
>> } else if (mp->m_dalign) {
>> mp->m_swidth = XFS_BB_TO_FSBT(mp, mp->m_swidth);
>> } else {
>> - if (mp->m_flags & XFS_MOUNT_RETERR) {
>> - xfs_warn(mp, "alignment check failed: "
>> - "sunit(%d) less than bsize(%d)",
>> - mp->m_dalign,
>> - mp->m_blockmask +1);
>> - return XFS_ERROR(EINVAL);
>> - }
>> - mp->m_swidth = 0;
>> + xfs_warn(mp, "alignment check failed: "
>> + "sunit(%d) less than bsize(%d)",
>> + mp->m_dalign, mp->m_blockmask + 1);
>
> "alignment check failed: sunit(%d) less than bsize(%d)",
> mp->m_dalign, sbp->sb_blocksize);
>> + return XFS_ERROR(EINVAL);
>> }
>> }
>>
>> diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
>> index bc90706..8145412 100644
>> --- a/fs/xfs/xfs_mount.h
>> +++ b/fs/xfs/xfs_mount.h
>> @@ -230,8 +230,6 @@ typedef struct xfs_mount {
>> operations, typically for
>> disk errors in metadata */
>> #define XFS_MOUNT_DISCARD (1ULL << 5) /* discard unused blocks */
>> -#define XFS_MOUNT_RETERR (1ULL << 6) /* return alignment errors to
>> - user */
>> #define XFS_MOUNT_NOALIGN (1ULL << 7) /* turn off stripe alignment
>> allocations */
>> #define XFS_MOUNT_ATTR2 (1ULL << 8) /* allow use of attr2 format */
>> diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c
>> index ea341ce..51da4d2 100644
>> --- a/fs/xfs/xfs_super.c
>> +++ b/fs/xfs/xfs_super.c
>> @@ -446,11 +446,8 @@ done:
>> * Before the mount call ends we will convert
>> * these to FSBs.
>> */
>> - if (dsunit) {
>> + if (dsunit)
>> mp->m_dalign = dsunit;
>> - mp->m_flags |= XFS_MOUNT_RETERR;
>> - }
>> -
>> if (dswidth)
>> mp->m_swidth = dswidth;
>
> This code can be simplified, too. We've already done this check:
>
> if ((dsunit && !dswidth) || (!dsunit && dswidth)) {
> xfs_warn(mp, "sunit and swidth must be specified together");
> return EINVAL;
> }
>
> So we know that dsunit/dswidth are either both zero or both set, so
> the above code could simply end up as:
>
> if (dsunit && !(mp->m_flags & XFS_MOUNT_NOALIGN)) {
> /*
> * At this point the superblock has not been read
> * in, therefore we do not know the block size.
> * Before the mount call ends we will convert
> * these to FSBs.
> */
> mp->m_dalign = dsunit;
> mp->m_swidth = dswidth;
> }
Exactly, will take care of this in next round of post.
Thanks,
-Jeff
More information about the xfs
mailing list