[patch] fix parallel build failures in xfsprogs-3.0.0
Christoph Hellwig
hch at infradead.org
Mon Mar 16 16:02:49 CDT 2009
On Mon, Mar 16, 2009 at 10:53:32AM +0100, Andreas Gruenbacher wrote:
> On Monday, 16 March 2009 8:31:48 Mike Frysinger wrote:
> > usually what i do is something like:
> > args=
> > libtoolize -n --install 2>/dev/null && args="-i"
> > libtoolize -c -f $args
>
> Sigh, the usual GNU utility problem. I've added a compatibility fix to attr
> and acl now. Thanks!
Ok. Can anyone review the cumulated autotools/libtool patch for
xfsprogs below?
Subject: Automake and libtool fixes
From: Andreas Gruenbacher <agruen at suse.de>
Remove aclocal.m4 from the repository and generate it when needed.
Move the AC_PROG_LIBTOOL autoconf macro and use libtoolize according to
the libtool info pages.
Make sure that libtoolize adds the auxiliary files (config.guess and
config.sub).
Move install-sh into include/ so that libtoolize does not destroy it.
Split up the ``make clean'' and ``make distclean'' targets: the former
removes all files generated during a build. The latter removes all
files generated by libtoolize, autoconf, and configure as well.
Signed-off-by: Andreas Gruenbacher <agruen at suse.de>
Signed-off-by: Christoph Hellwig <hch at lst.de>
Index: xfsprogs-dev/Makefile
===================================================================
--- xfsprogs-dev.orig/Makefile 2009-03-16 07:57:07.891007993 +0100
+++ xfsprogs-dev/Makefile 2009-03-16 21:58:18.036977931 +0100
@@ -9,11 +9,18 @@ ifeq ($(HAVE_BUILDDEFS), yes)
include $(TOPDIR)/include/builddefs
endif
-CONFIGURE = configure include/builddefs include/platform_defs.h
-LSRCFILES = configure configure.in Makepkgs aclocal.m4 install-sh README VERSION
+CONFIGURE = \
+ aclocal.m4 \
+ configure config.guess config.sub \
+ ltmain.sh m4/libtool.m4 m4/ltoptions.m4 m4/ltsugar.m4 \
+ m4/ltversion.m4 m4/lt~obsolete.m4 \
+ include/builddefs include/platform_defs.h
+LSRCFILES = \
+ configure.in Makepkgs install-sh README VERSION \
+ configure aclocal.m4
-LDIRT = config.log .dep config.status config.cache confdefs.h conftest* \
- Logs/* built .census install.* install-dev.* *.gz
+LDIRT = config.log config.status config.cache confdefs.h built .census \
+ Logs/* conftest* install.* install-dev.* *.dep *.gz
LIB_SUBDIRS = libxfs libxlog libxcmd libhandle libdisk
TOOL_SUBDIRS = copy db estimate fsck fsr growfs io logprint mkfs quota \
@@ -21,7 +28,7 @@ TOOL_SUBDIRS = copy db estimate fsck fsr
SUBDIRS = include $(LIB_SUBDIRS) $(TOOL_SUBDIRS)
-default: include/builddefs include/platform_defs.h
+default: configure include/builddefs include/platform_defs.h
ifeq ($(HAVE_BUILDDEFS), no)
$(MAKE) -C . $@
else
@@ -45,7 +52,15 @@ else
clean: # if configure hasn't run, nothing to clean
endif
+# Recent versions of libtool require the -i option for copying auxiliary
+# files (config.sub, config.guess, install-sh, ltmain.sh), while older
+# versions will copy those files anyway, and don't understand -i.
+LIBTOOLIZE_INSTALL = `libtoolize -n -i >/dev/null 2>/dev/null && echo -i`
+
configure include/builddefs:
+ libtoolize -c $(LIBTOOLIZE_INSTALL) -f
+ cp include/install-sh .
+ aclocal -I m4
autoconf
./configure \
--prefix=/ \
@@ -68,9 +83,6 @@ include/platform_defs.h: include/buildde
$(MAKE) $(AM_MAKEFLAGS) include/builddefs; \
fi
-aclocal.m4::
- aclocal --acdir=`pwd`/m4 --output=$@
-
install: default $(addsuffix -install,$(SUBDIRS))
$(INSTALL) -m 755 -d $(PKG_DOC_DIR)
$(INSTALL) -m 644 README $(PKG_DOC_DIR)
@@ -90,4 +102,5 @@ install-qa: install $(addsuffix -install
realclean distclean: clean
rm -f $(LDIRT) $(CONFIGURE)
+ rm -f include/builddefs include/config.h install-sh libtool
rm -rf autom4te.cache Logs
Index: xfsprogs-dev/configure.in
===================================================================
--- xfsprogs-dev.orig/configure.in 2009-03-16 07:57:07.898984077 +0100
+++ xfsprogs-dev/configure.in 2009-03-16 21:58:18.036977931 +0100
@@ -1,6 +1,10 @@
AC_INIT(include/libxfs.h)
+AC_CONFIG_AUX_DIR([.])
+AC_CONFIG_MACRO_DIR([m4])
AC_CONFIG_HEADER(include/platform_defs.h)
+AC_PROG_LIBTOOL
+
AC_ARG_ENABLE(shared,
[ --enable-shared=[yes/no] Enable use of shared libraries [default=yes]],,
enable_shared=yes)
Index: xfsprogs-dev/m4/package_utilies.m4
===================================================================
--- xfsprogs-dev.orig/m4/package_utilies.m4 2009-03-16 07:57:07.903978218 +0100
+++ xfsprogs-dev/m4/package_utilies.m4 2009-03-16 07:57:09.538978690 +0100
@@ -32,8 +32,6 @@ AC_DEFUN([AC_PACKAGE_UTILITIES],
AC_SUBST(make)
AC_PACKAGE_NEED_UTILITY($1, "$make", make, [GNU make])
- AC_PROG_LIBTOOL
-
if test -z "$TAR"; then
AC_PATH_PROG(TAR, tar,, /usr/freeware/bin:/bin:/usr/local/bin:/usr/bin)
fi
Index: xfsprogs-dev/include/Makefile
===================================================================
--- xfsprogs-dev.orig/include/Makefile 2009-03-16 21:58:09.403978018 +0100
+++ xfsprogs-dev/include/Makefile 2009-03-16 21:58:18.036977931 +0100
@@ -36,8 +36,8 @@ HFILES += $(PKG_PLATFORM).h
PHFILES = darwin.h freebsd.h irix.h linux.h
DKHFILES = volume.h fstyp.h dvh.h
LSRCFILES = $(shell echo $(PHFILES) | sed -e "s/$(PKG_PLATFORM).h//g")
-LSRCFILES += platform_defs.h.in builddefs.in buildmacros buildrules $(DKHFILES)
-LSRCFILES += command.h input.h path.h project.h unaligned.h
+LSRCFILES += platform_defs.h.in builddefs.in buildmacros buildrules install-sh
+LSRCFILES += $(DKHFILES) command.h input.h path.h project.h unaligned.h
LDIRT = xfs disk
default install: xfs disk
Index: xfsprogs-dev/include/install-sh
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ xfsprogs-dev/include/install-sh 2009-03-16 21:58:18.037978687 +0100
@@ -0,0 +1,349 @@
+#! /bin/sh
+#
+# Copyright (c) 2000-2001 Silicon Graphics, Inc. All Rights Reserved.
+#
+# This script emulates bsd install and also recognises
+# two environment variables, with the following semantics :-
+#
+# $DIST_MANIFEST - if set, the name of the file to append manifest
+# information in the following format:
+# File : f mode owner group src target
+# Directory: d mode owner group target
+# Symlink : l linkval target
+#
+# $DIST_ROOT - if set, prepend to target
+#
+# The sematics of all combinations of these two variables
+# are as follows:
+#
+# $DIST_MANIFEST? $DIST_ROOT? | Copy? Append Manifest?
+# -----------------------------+--------------------------
+# not set not set | yes no
+# not set set | yes no
+# set not set | no yes
+# set set | yes yes
+#
+_usage() {
+ echo "Usage: $prog [-o owner] [-g group] [-m mode] -d directory"
+ echo "or $prog [-D] [-o owner] [-g group] [-m mode] file directory/file"
+ echo "or $prog [-o owner] [-g group] [-m mode] file [file ...] directory"
+ echo "or $prog -S file target (creates \"target\" symlink)"
+ echo "or $prog -T lt_arg [-o owner] [-g group] [-m mode] libtool.lai directory"
+ echo ""
+ echo "The \$DIST_MANIFEST and \$DIST_ROOT environment variables affect the"
+ echo "behaviour of this command - see comments in the script."
+ echo "The -D flag is only available for the second usage, and causes"
+ echo "the target directory to be created before installing the file."
+ echo ""
+ exit 1
+}
+
+_chown ()
+{
+ _st=255
+ if [ $# -eq 3 ] ; then
+ chown $1:$2 $3
+ _st=$?
+ if [ $_st -ne 0 ] ; then
+ if [ $REAL_UID != '0' ] ; then
+ if [ ! -f $DIST_ROOT/.chown.quiet ] ; then
+ echo '==============================================='
+ echo Ownership of files under ${DIST_ROOT:-/}
+ echo cannot be changed
+ echo '==============================================='
+ if [ -n "$DIST_ROOT" ] ; then
+ touch $DIST_ROOT/.chown.quiet
+ fi
+ fi
+ _st=0
+ fi
+ fi
+ fi
+
+ return $_st
+}
+
+
+_manifest ()
+{
+ echo $* | sed -e 's/\/\//\//g' >>${DIST_MANIFEST:-/dev/null}
+}
+
+prog=`basename $0`
+HERE=`pwd`
+dflag=false
+Dflag=false
+Sflag=false
+Tflag=false
+DIRMODE=755
+FILEMODE=644
+OWNER=`id -u`
+GROUP=`id -g`
+REAL_UID=$OWNER
+
+# default is to install and don't append manifest
+INSTALL=true
+MANIFEST=:
+
+[ -n "$DIST_MANIFEST" -a -z "$DIST_ROOT" ] && INSTALL=false
+[ -n "$DIST_MANIFEST" ] && MANIFEST="_manifest"
+
+[ $# -eq 0 ] && _usage
+
+if $INSTALL
+then
+ CP=cp; LN=ln; MKDIR=mkdir; CHMOD=chmod; CHOWN=_chown
+else
+ CP=true; LN=true; MKDIR=true; CHMOD=true; CHOWN=true
+fi
+
+[ -n "$DIST_ROOT" -a $REAL_UID -ne 0 ] && CHOWN=true
+
+while getopts "Dcm:d:S:o:g:T:" c $*
+do
+ case $c in
+ c)
+ ;;
+ g)
+ GROUP=$OPTARG
+ ;;
+ o)
+ OWNER=$OPTARG
+ ;;
+ m)
+ DIRMODE=`expr $OPTARG`
+ FILEMODE=$DIRMODE
+ ;;
+ D)
+ Dflag=true
+ ;;
+ S)
+ symlink=$OPTARG
+ Sflag=true
+ ;;
+ d)
+ dir=$DIST_ROOT/$OPTARG
+ dflag=true
+ ;;
+ T)
+ lt_install=$OPTARG
+ Tflag=true
+ ;;
+ *)
+ _usage
+ ;;
+ esac
+done
+
+shift `expr $OPTIND - 1`
+
+status=0
+if $dflag
+then
+ #
+ # first usage
+ #
+ $MKDIR -p $dir
+ status=$?
+ if [ $status -eq 0 ]
+ then
+ $CHMOD $DIRMODE $dir
+ status=$?
+ fi
+ if [ $status -eq 0 ]
+ then
+ $CHOWN $OWNER $GROUP $dir
+ status=$?
+ fi
+ $MANIFEST d $DIRMODE $OWNER $GROUP ${dir#$DIST_ROOT}
+elif $Sflag
+then
+ #
+ # fourth usage (symlink)
+ #
+ if [ $# -ne 1 ]
+ then
+ _usage
+ else
+ target=$DIST_ROOT/$1
+ fi
+ $LN -s -f $symlink $target
+ status=$?
+ $MANIFEST l $symlink ${target#$DIST_ROOT}
+elif $Tflag
+then
+ #
+ # -T (install libs built by libtool)
+ #
+ if [ $# -ne 2 ]
+ then
+ _usage
+ else
+ libtool_lai=$1
+ # source the libtool variables
+ if [ ! -f $libtool_lai ]
+ then
+ echo "$prog: Unable to find libtool library file $libtool_lai"
+ exit 2
+ fi
+ . ./$libtool_lai
+ target=$DIST_ROOT/$2
+ fi
+ case $lt_install in
+ so_dot_version)
+ # Loop until we find libfoo.so.x.y.z, then break out.
+ for solib in $library_names
+ do
+ # does it have enough parts? libfoo.so.x.y.z == 5
+ cnt=`echo "$solib" | sed -e 's/\./ /g' | wc -w`
+ if [ $cnt -eq 5 ]
+ then
+ install_name=$target/$solib
+ $CP $solib $install_name
+ status=$?
+ $MANIFEST f $FILEMODE $OWNER $GROUP $HERE/$solib ${install_name#$DIST_ROOT}
+ break
+ fi
+ done
+ ;;
+
+ so_*)
+ case $lt_install in
+ so_dot_current)
+ # ln -s libfoo.so.x.y.z to libfoo.so.x
+ from_parts=5 # libfoo.so.x.y.z
+ to_parts=3 # libfoo.so.x
+ ;;
+ so_base)
+ # ln -s libfoo.so.x to libfoo.so
+ from_parts=3 # libfoo.so.x
+ to_parts=2 # libfoo.so
+ ;;
+ *)
+ echo "$prog: -T $lt_install invalid"
+ exit 2
+ ;;
+ esac
+
+ # Loop until we find the names, then break out.
+ for solib in $library_names
+ do
+ # does it have enough parts?
+ cnt=`echo "$solib" | sed -e 's/\./ /g' | wc -w`
+ if [ $cnt -eq $from_parts ]
+ then
+ from_name=$solib
+ elif [ $cnt -eq $to_parts ]
+ then
+ to_name=$solib
+ fi
+
+ if [ -n "$from_name" ] && [ -n "$to_name" ]
+ then
+ install_name=$target/$to_name
+ $LN -s -f $from_name $install_name
+ status=$?
+ $MANIFEST l $from_name ${install_name#$DIST_ROOT}
+ break
+ fi
+ done
+ ;;
+ old_lib)
+ install_name=$target/$old_library
+ $CP $old_library $install_name
+ status=$?
+ $MANIFEST f $FILEMODE $OWNER $GROUP $HERE/$old_library ${install_name#$DIST_ROOT}
+ ;;
+ *)
+ echo "$prog: -T $lt_install invalid"
+ exit 2
+ ;;
+ esac
+
+ case $lt_install in
+ old_lib|so_dot_version)
+ if [ $status -eq 0 ]
+ then
+ $CHMOD $FILEMODE $install_name
+ $CHOWN $OWNER $GROUP $install_name
+ fi
+ ;;
+ esac
+
+else
+ list=""
+ dir=""
+ if [ $# -eq 2 ]
+ then
+ #
+ # second usage
+ #
+ f=$1
+ dir=$DIST_ROOT/$2
+ if $Dflag
+ then
+ mkdir -p `dirname $dir`
+ fi
+ $CP $f $dir
+ status=$?
+ if [ $status -eq 0 ]
+ then
+ if [ -f $dir/$f ]
+ then
+ $CHMOD $FILEMODE $dir/$f
+ status=$?
+ if [ $status -eq 0 ]
+ then
+ $CHOWN $OWNER $GROUP $dir/$f
+ status=$?
+ fi
+ $MANIFEST f $FILEMODE $OWNER $GROUP $HERE/$f ${dir#$DIST_ROOT}/$f
+ else
+ $CHMOD $FILEMODE $dir
+ status=$?
+ if [ $status -eq 0 ]
+ then
+ $CHOWN $OWNER $GROUP $dir
+ status=$?
+ fi
+ $MANIFEST f $FILEMODE $OWNER $GROUP $HERE/$dir ${dir#$DIST_ROOT}
+ fi
+ fi
+ else
+ #
+ # third usage
+ #
+ n=1
+ while [ $# -gt 0 ]
+ do
+ if [ $# -gt 1 ]
+ then
+ list="$list $1"
+ else
+ dir=$DIST_ROOT/$1
+ fi
+ shift
+ done
+
+ # echo DIR=$dir list=\"$list\"
+ for f in $list
+ do
+ $CP $f $dir
+ status=$?
+ if [ $status -eq 0 ]
+ then
+ $CHMOD $FILEMODE $dir/$f
+ status=$?
+ if [ $status -eq 0 ]
+ then
+ $CHOWN $OWNER $GROUP $dir/$f
+ status=$?
+ fi
+ $MANIFEST f $FILEMODE $OWNER $GROUP $HERE/$f ${dir#$DIST_ROOT}/$f
+ fi
+ [ $status -ne 0 ] && break
+ done
+ fi
+fi
+
+exit $status
More information about the xfs
mailing list