[PATCH] xfstests: actually hook up 198, make it generic

Eric Sandeen sandeen at sandeen.net
Wed Jul 29 13:07:51 CDT 2009


Not entirely sure how I managed this, but 198 was not in groups
so was never run - and wasn't in the makefile, so was never built.
Oops.

Fix that up, make it a generic test, and move it to the
aio-dio-regress subdir.

Signed-off-by: Eric Sandeen <sandeen at sandeen.net>
---

diff --git a/198 b/198
index 242ac9e..bfa71a0 100755
--- a/198
+++ b/198
@@ -43,7 +43,7 @@ _cleanup()
 . ./common.filter
 
 # This should actually run on anything that supports O_DIRECT + AIO...
-_supported_fs xfs
+_supported_fs generic
 _supported_os Linux
 
 echo "Silence is golden."
@@ -52,7 +52,7 @@ echo "Silence is golden."
 rm -f $seq.full
 
 rm -f "$TEST_DIR/aiodio_sparse*"
-$here/src/aiodio_sparse2 "$TEST_DIR/aiodio_sparse"
+$here/src/aio-dio-regress/aiodio_sparse2 "$TEST_DIR/aiodio_sparse"
 
 status=$?
 exit
diff --git a/group b/group
index 4391a4a..439a6e6 100644
--- a/group
+++ b/group
@@ -307,6 +307,7 @@ prealloc
 195 ioctl dump auto quick
 196 quota auto quick
 197 dir auto quick
+198 aio auto quick
 199 mount auto quick
 200 mount auto quick
 201 metadata auto quick
diff --git a/src/aio-dio-regress/aiodio_sparse2.c b/src/aio-dio-regress/aiodio_sparse2.c
new file mode 100644
index 0000000..b56f91a
--- /dev/null
+++ b/src/aio-dio-regress/aiodio_sparse2.c
@@ -0,0 +1,384 @@
+/* gcc -g -Wall -O2 aiodio_sparse.c -o aiodio_sparse -laio */
+
+/*
+ * From http://developer.osdl.org/daniel/AIO/TESTS/aiodio_sparse.c
+ * With patch from https://bugzilla.redhat.com/attachment.cgi?id=142124
+ * (Bug https://bugzilla.redhat.com/show_bug.cgi?id=217098)
+ */
+
+#ifndef _GNU_SOURCE
+#define _GNU_SOURCE
+#endif
+#include <sys/types.h>
+#include <errno.h>
+#include <signal.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <limits.h>
+#include <sys/mman.h>
+#include <sys/wait.h>
+
+#include <libaio.h>
+
+int debug;
+
+/*
+ * aiodio_sparse - issue async O_DIRECT writes to holes is a file while
+ *	concurrently reading the file and checking that the read never reads
+ *	uninitailized data.
+ */
+
+unsigned char *check_zero(unsigned char *buf, int size)
+{
+	unsigned char *p;
+
+	p = buf;
+
+	while (size > 0) {
+		if (*buf != 1) {
+			fprintf(stderr, "non one buffer at buf[%ld] => 0x%02x,%02x,%02x,%02x\n",
+				(long)(buf - p), (unsigned int)buf[0],
+				size > 1 ? (unsigned int)buf[1] : 0,
+				size > 2 ? (unsigned int)buf[2] : 0,
+				size > 3 ? (unsigned int)buf[3] : 0);
+			if (debug)
+				fprintf(stderr, "buf %p, p %p\n", buf, p);
+			return buf;
+		}
+		buf++;
+		size--;
+	}
+	return 0;	/* all zeros */
+}
+
+volatile int got_signal;
+
+void
+sig_term_func(int i, siginfo_t *si, void *p)
+{
+	if (debug)
+		fprintf(stderr, "sig(%d, %p, %p)\n", i, si, p);
+	got_signal++;
+}
+
+/*
+ * do async DIO writes to a sparse file
+ */
+void aiodio_sparse(char *filename, int align, int writesize, int filesize, int num_aio, int step, int sparse, int direct, int keep)
+{
+	int fd;
+	void *bufptr;
+	int i;
+	int w;
+	static struct sigaction s;
+	struct iocb **iocbs;
+	off_t offset;
+	io_context_t myctx;
+	struct io_event event;
+	int aio_inflight;
+
+	s.sa_sigaction = sig_term_func;
+	s.sa_flags = SA_SIGINFO;
+	sigaction(SIGTERM, &s, 0);
+
+	if ((num_aio * step) > filesize) {
+		num_aio = filesize / step;
+	}
+	memset(&myctx, 0, sizeof(myctx));
+	io_queue_init(num_aio, &myctx);
+
+	iocbs = (struct iocb **)calloc(num_aio, sizeof(struct iocb *));
+	for (i = 0; i < num_aio; i++) {
+		if ((iocbs[i] = (struct iocb *)calloc(1, sizeof(struct iocb))) == 0) {
+			perror("cannot malloc iocb");
+			return;
+		}
+	}
+
+	fd = open(filename, direct|O_WRONLY|O_CREAT, 0666);
+
+	if (fd < 0) {
+		perror("cannot create file");
+		return;
+	}
+
+	if (sparse)
+		ftruncate(fd, filesize);
+
+	/*
+	 * allocate the iocbs array and iocbs with buffers
+	 */
+	offset = 0;
+	for (i = 0; i < num_aio; i++) {
+		void *bufptr;
+
+		if (posix_memalign(&bufptr, align, writesize)) {
+			perror("cannot malloc aligned memory");
+			close(fd);
+			unlink(filename);
+			return;
+		}
+		memset(bufptr, 1, writesize);
+		io_prep_pwrite(iocbs[i], fd, bufptr, writesize, offset);
+		offset += step;
+	}
+
+	/*
+	 * start the 1st num_aio write requests
+	 */
+	if ((w = io_submit(myctx, num_aio, iocbs)) < 0) {
+		perror("io_submit failed");
+		close(fd);
+		unlink(filename);
+		return;
+	}
+	if (debug)
+		fprintf(stderr, "io_submit() return %d\n", w);
+
+	/*
+	 * As AIO requests finish, keep issuing more AIO until done.
+	 */
+	aio_inflight = num_aio;
+	if (debug)
+		fprintf(stderr, "aiodio_sparse: %d i/o in flight\n", aio_inflight);
+	while (offset < filesize)  {
+		int n;
+		struct iocb *iocbp;
+
+		if (debug)
+			fprintf(stderr, "aiodio_sparse: offset %lld filesize %d inflight %d\n",
+				(long long)offset, filesize, aio_inflight);
+
+		if ((n = io_getevents(myctx, 1, 1, &event, 0)) != 1) {
+			if (-n != EINTR)
+				fprintf(stderr, "io_getevents() returned %d\n", n);
+			break;
+		}
+		if (debug)
+			fprintf(stderr, "aiodio_sparse: io_getevent() returned %d\n", n);
+		aio_inflight--;
+		if (got_signal)
+			break;		/* told to stop */
+		/*
+		 * check if write succeeded.
+		 */
+		iocbp = event.obj;
+		if (event.res2 != 0 || event.res != iocbp->u.c.nbytes) {
+			fprintf(stderr,
+				"AIO write offset %lld expected %ld got %ld\n",
+				iocbp->u.c.offset, iocbp->u.c.nbytes,
+				event.res);
+			break;
+		}
+		if (debug)
+			fprintf(stderr, "aiodio_sparse: io_getevent() res %ld res2 %ld\n",
+				event.res, event.res2);
+
+		/* start next write */
+		io_prep_pwrite(iocbp, fd, iocbp->u.c.buf, writesize, offset);
+		offset += step;
+		if ((w = io_submit(myctx, 1, &iocbp)) < 0) {
+			fprintf(stderr, "io_submit failed at offset %lld\n",
+				(long long)offset);
+			perror("");
+			break;
+		}
+		if (debug)
+			fprintf(stderr, "io_submit() return %d\n", w);
+		aio_inflight++;
+	}
+
+	/*
+	 * wait for AIO requests in flight.
+	 */
+	while (aio_inflight > 0) {
+		int n;
+		struct iocb *iocbp;
+
+		if ((n = io_getevents(myctx, 1, 1, &event, 0)) != 1) {
+			perror("io_getevents failed");
+			break;
+		}
+		aio_inflight--;
+		/*
+		 * check if write succeeded.
+		 */
+		iocbp = event.obj;
+		if (event.res2 != 0 || event.res != iocbp->u.c.nbytes) {
+			fprintf(stderr,
+				"AIO write offset %lld expected %ld got %ld\n",
+				iocbp->u.c.offset, iocbp->u.c.nbytes,
+				event.res);
+		}
+	}
+	if (debug)
+		fprintf(stderr, "AIO DIO write done\n");
+	close(fd);
+	if ((fd = open(filename, O_RDONLY)) < 0)
+		exit(1);
+
+	bufptr = malloc(writesize);
+	for (offset = 0; offset < filesize; offset += step)  {
+		unsigned char *badbuf;
+
+		lseek(fd, offset, SEEK_SET);
+		if (read(fd, bufptr, writesize) < writesize) {
+			fprintf(stderr, "short read() at offset %lld\n",
+				(long long) offset);
+			exit(11);
+		}
+		if ((badbuf = check_zero(bufptr, writesize))) {
+			fprintf(stderr, "non-one read at offset %lld\n",
+				(long long)(offset + badbuf - (unsigned char*)bufptr));
+			fprintf(stderr, "*** WARNING *** %s has not been unlinked; if you don't rm it manually first, it may influence the next run\n", filename);
+			exit(10);
+		}
+	}
+	close(fd);
+	if (!keep)
+		unlink(filename);
+	else
+		fprintf(stderr, "*** WARNING *** You requested %s not to be unlinked; if you don't rm it manually first, it may influence the next run\n", filename);
+}
+
+void dirty_freeblocks(char *filename, int size)
+{
+	int fd;
+	void *p;
+	int pg;
+	char filename2[PATH_MAX];
+
+	pg = getpagesize();
+	size = ((size + pg - 1) / pg) * pg;
+	sprintf(filename2, "%s.xx.%d", filename, getpid());
+	fd = open(filename2, O_CREAT|O_RDWR, 0666);
+	if (fd < 0) {
+		perror("cannot open file");
+		exit(2);
+	}
+	ftruncate(fd, size);
+	p = mmap(0, size, PROT_WRITE|PROT_READ, MAP_SHARED|MAP_FILE, fd, 0);
+	if (p == MAP_FAILED) {
+		perror("cannot mmap");
+		exit(2);
+	}
+	memset(p, 0xaa, size);
+	msync(p, size, MS_SYNC);
+	munmap(p, size);
+	close(fd);
+	unlink(filename2);
+}
+
+void usage()
+{
+	fprintf(stderr, "usage: dio_sparse [-n step] [-s filesize]"
+		" [-w writesize] [-r readsize] filename\n");
+	exit(1);
+}
+
+/*
+ * Scale value by kilo, mega, or giga.
+ */
+long long scale_by_kmg(long long value, char scale)
+{
+	switch (scale) {
+	case 'g':
+	case 'G':
+		value *= 1024;
+	case 'm':
+	case 'M':
+		value *= 1024;
+	case 'k':
+	case 'K':
+		value *= 1024;
+		break;
+	case '\0':
+		break;
+	default:
+		usage();
+		break;
+	}
+	return value;
+}
+
+/*
+ *	usage:
+ * aiodio_sparse [-r readsize] [-w writesize] [-n step] [-a align] [-i num_aio] filename
+ */
+
+int main(int argc, char **argv)
+{
+	char filename[PATH_MAX];
+	long alignment = 512;
+	int readsize = 65536;
+	int writesize = 65536;
+	int filesize = 100*1024*1024;
+	int num_aio = 16;
+	int step = 5*1024*1024;
+	int c, direct = O_DIRECT, keep = 0, sparse = 1;
+	extern char *optarg;
+	extern int optind, optopt, opterr;
+
+	while ((c = getopt(argc, argv, "dr:w:n:a:s:i:DkS")) != -1) {
+		char *endp;
+		switch (c) {
+		case 'D':
+			direct = 0;
+			break;
+		case 'k':
+			keep = 1;
+			break;
+		case 'S':
+			sparse = 0;
+			break;
+		case 'd':
+			debug++;
+			break;
+		case 'i':
+			num_aio = atoi(optarg);
+			break;
+		case 'a':
+			alignment = strtol(optarg, &endp, 0);
+			alignment = (int)scale_by_kmg((long long)alignment,
+                                                        *endp);
+			break;
+		case 'r':
+			readsize = strtol(optarg, &endp, 0);
+			readsize = (int)scale_by_kmg((long long)readsize, *endp);
+			break;
+		case 'w':
+			writesize = strtol(optarg, &endp, 0);
+			writesize = (int)scale_by_kmg((long long)writesize, *endp);
+			break;
+		case 's':
+			filesize = strtol(optarg, &endp, 0);
+			filesize = (int)scale_by_kmg((long long)filesize, *endp);
+			break;
+		case 'n':
+			step = strtol(optarg, &endp, 0);
+			step = (int)scale_by_kmg((long long)step, *endp);
+			break;
+		case '?':
+			usage();
+			break;
+		}
+	}
+
+	strncpy(filename, argv[argc-1], PATH_MAX);
+
+	/*
+	 * Create some dirty free blocks by allocating, writing, syncing,
+	 * and then unlinking and freeing.
+	 */
+	dirty_freeblocks(filename, filesize);
+
+	/*
+	 * Parent write to a hole in a file using async direct i/o
+	 */
+
+	aiodio_sparse(filename, alignment, writesize, filesize, num_aio, step, sparse, direct, keep);
+
+	return 0;
+}
diff --git a/src/aiodio_sparse2.c b/src/aiodio_sparse2.c
deleted file mode 100644
index b56f91a..0000000
--- a/src/aiodio_sparse2.c
+++ /dev/null
@@ -1,384 +0,0 @@
-/* gcc -g -Wall -O2 aiodio_sparse.c -o aiodio_sparse -laio */
-
-/*
- * From http://developer.osdl.org/daniel/AIO/TESTS/aiodio_sparse.c
- * With patch from https://bugzilla.redhat.com/attachment.cgi?id=142124
- * (Bug https://bugzilla.redhat.com/show_bug.cgi?id=217098)
- */
-
-#ifndef _GNU_SOURCE
-#define _GNU_SOURCE
-#endif
-#include <sys/types.h>
-#include <errno.h>
-#include <signal.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <limits.h>
-#include <sys/mman.h>
-#include <sys/wait.h>
-
-#include <libaio.h>
-
-int debug;
-
-/*
- * aiodio_sparse - issue async O_DIRECT writes to holes is a file while
- *	concurrently reading the file and checking that the read never reads
- *	uninitailized data.
- */
-
-unsigned char *check_zero(unsigned char *buf, int size)
-{
-	unsigned char *p;
-
-	p = buf;
-
-	while (size > 0) {
-		if (*buf != 1) {
-			fprintf(stderr, "non one buffer at buf[%ld] => 0x%02x,%02x,%02x,%02x\n",
-				(long)(buf - p), (unsigned int)buf[0],
-				size > 1 ? (unsigned int)buf[1] : 0,
-				size > 2 ? (unsigned int)buf[2] : 0,
-				size > 3 ? (unsigned int)buf[3] : 0);
-			if (debug)
-				fprintf(stderr, "buf %p, p %p\n", buf, p);
-			return buf;
-		}
-		buf++;
-		size--;
-	}
-	return 0;	/* all zeros */
-}
-
-volatile int got_signal;
-
-void
-sig_term_func(int i, siginfo_t *si, void *p)
-{
-	if (debug)
-		fprintf(stderr, "sig(%d, %p, %p)\n", i, si, p);
-	got_signal++;
-}
-
-/*
- * do async DIO writes to a sparse file
- */
-void aiodio_sparse(char *filename, int align, int writesize, int filesize, int num_aio, int step, int sparse, int direct, int keep)
-{
-	int fd;
-	void *bufptr;
-	int i;
-	int w;
-	static struct sigaction s;
-	struct iocb **iocbs;
-	off_t offset;
-	io_context_t myctx;
-	struct io_event event;
-	int aio_inflight;
-
-	s.sa_sigaction = sig_term_func;
-	s.sa_flags = SA_SIGINFO;
-	sigaction(SIGTERM, &s, 0);
-
-	if ((num_aio * step) > filesize) {
-		num_aio = filesize / step;
-	}
-	memset(&myctx, 0, sizeof(myctx));
-	io_queue_init(num_aio, &myctx);
-
-	iocbs = (struct iocb **)calloc(num_aio, sizeof(struct iocb *));
-	for (i = 0; i < num_aio; i++) {
-		if ((iocbs[i] = (struct iocb *)calloc(1, sizeof(struct iocb))) == 0) {
-			perror("cannot malloc iocb");
-			return;
-		}
-	}
-
-	fd = open(filename, direct|O_WRONLY|O_CREAT, 0666);
-
-	if (fd < 0) {
-		perror("cannot create file");
-		return;
-	}
-
-	if (sparse)
-		ftruncate(fd, filesize);
-
-	/*
-	 * allocate the iocbs array and iocbs with buffers
-	 */
-	offset = 0;
-	for (i = 0; i < num_aio; i++) {
-		void *bufptr;
-
-		if (posix_memalign(&bufptr, align, writesize)) {
-			perror("cannot malloc aligned memory");
-			close(fd);
-			unlink(filename);
-			return;
-		}
-		memset(bufptr, 1, writesize);
-		io_prep_pwrite(iocbs[i], fd, bufptr, writesize, offset);
-		offset += step;
-	}
-
-	/*
-	 * start the 1st num_aio write requests
-	 */
-	if ((w = io_submit(myctx, num_aio, iocbs)) < 0) {
-		perror("io_submit failed");
-		close(fd);
-		unlink(filename);
-		return;
-	}
-	if (debug)
-		fprintf(stderr, "io_submit() return %d\n", w);
-
-	/*
-	 * As AIO requests finish, keep issuing more AIO until done.
-	 */
-	aio_inflight = num_aio;
-	if (debug)
-		fprintf(stderr, "aiodio_sparse: %d i/o in flight\n", aio_inflight);
-	while (offset < filesize)  {
-		int n;
-		struct iocb *iocbp;
-
-		if (debug)
-			fprintf(stderr, "aiodio_sparse: offset %lld filesize %d inflight %d\n",
-				(long long)offset, filesize, aio_inflight);
-
-		if ((n = io_getevents(myctx, 1, 1, &event, 0)) != 1) {
-			if (-n != EINTR)
-				fprintf(stderr, "io_getevents() returned %d\n", n);
-			break;
-		}
-		if (debug)
-			fprintf(stderr, "aiodio_sparse: io_getevent() returned %d\n", n);
-		aio_inflight--;
-		if (got_signal)
-			break;		/* told to stop */
-		/*
-		 * check if write succeeded.
-		 */
-		iocbp = event.obj;
-		if (event.res2 != 0 || event.res != iocbp->u.c.nbytes) {
-			fprintf(stderr,
-				"AIO write offset %lld expected %ld got %ld\n",
-				iocbp->u.c.offset, iocbp->u.c.nbytes,
-				event.res);
-			break;
-		}
-		if (debug)
-			fprintf(stderr, "aiodio_sparse: io_getevent() res %ld res2 %ld\n",
-				event.res, event.res2);
-
-		/* start next write */
-		io_prep_pwrite(iocbp, fd, iocbp->u.c.buf, writesize, offset);
-		offset += step;
-		if ((w = io_submit(myctx, 1, &iocbp)) < 0) {
-			fprintf(stderr, "io_submit failed at offset %lld\n",
-				(long long)offset);
-			perror("");
-			break;
-		}
-		if (debug)
-			fprintf(stderr, "io_submit() return %d\n", w);
-		aio_inflight++;
-	}
-
-	/*
-	 * wait for AIO requests in flight.
-	 */
-	while (aio_inflight > 0) {
-		int n;
-		struct iocb *iocbp;
-
-		if ((n = io_getevents(myctx, 1, 1, &event, 0)) != 1) {
-			perror("io_getevents failed");
-			break;
-		}
-		aio_inflight--;
-		/*
-		 * check if write succeeded.
-		 */
-		iocbp = event.obj;
-		if (event.res2 != 0 || event.res != iocbp->u.c.nbytes) {
-			fprintf(stderr,
-				"AIO write offset %lld expected %ld got %ld\n",
-				iocbp->u.c.offset, iocbp->u.c.nbytes,
-				event.res);
-		}
-	}
-	if (debug)
-		fprintf(stderr, "AIO DIO write done\n");
-	close(fd);
-	if ((fd = open(filename, O_RDONLY)) < 0)
-		exit(1);
-
-	bufptr = malloc(writesize);
-	for (offset = 0; offset < filesize; offset += step)  {
-		unsigned char *badbuf;
-
-		lseek(fd, offset, SEEK_SET);
-		if (read(fd, bufptr, writesize) < writesize) {
-			fprintf(stderr, "short read() at offset %lld\n",
-				(long long) offset);
-			exit(11);
-		}
-		if ((badbuf = check_zero(bufptr, writesize))) {
-			fprintf(stderr, "non-one read at offset %lld\n",
-				(long long)(offset + badbuf - (unsigned char*)bufptr));
-			fprintf(stderr, "*** WARNING *** %s has not been unlinked; if you don't rm it manually first, it may influence the next run\n", filename);
-			exit(10);
-		}
-	}
-	close(fd);
-	if (!keep)
-		unlink(filename);
-	else
-		fprintf(stderr, "*** WARNING *** You requested %s not to be unlinked; if you don't rm it manually first, it may influence the next run\n", filename);
-}
-
-void dirty_freeblocks(char *filename, int size)
-{
-	int fd;
-	void *p;
-	int pg;
-	char filename2[PATH_MAX];
-
-	pg = getpagesize();
-	size = ((size + pg - 1) / pg) * pg;
-	sprintf(filename2, "%s.xx.%d", filename, getpid());
-	fd = open(filename2, O_CREAT|O_RDWR, 0666);
-	if (fd < 0) {
-		perror("cannot open file");
-		exit(2);
-	}
-	ftruncate(fd, size);
-	p = mmap(0, size, PROT_WRITE|PROT_READ, MAP_SHARED|MAP_FILE, fd, 0);
-	if (p == MAP_FAILED) {
-		perror("cannot mmap");
-		exit(2);
-	}
-	memset(p, 0xaa, size);
-	msync(p, size, MS_SYNC);
-	munmap(p, size);
-	close(fd);
-	unlink(filename2);
-}
-
-void usage()
-{
-	fprintf(stderr, "usage: dio_sparse [-n step] [-s filesize]"
-		" [-w writesize] [-r readsize] filename\n");
-	exit(1);
-}
-
-/*
- * Scale value by kilo, mega, or giga.
- */
-long long scale_by_kmg(long long value, char scale)
-{
-	switch (scale) {
-	case 'g':
-	case 'G':
-		value *= 1024;
-	case 'm':
-	case 'M':
-		value *= 1024;
-	case 'k':
-	case 'K':
-		value *= 1024;
-		break;
-	case '\0':
-		break;
-	default:
-		usage();
-		break;
-	}
-	return value;
-}
-
-/*
- *	usage:
- * aiodio_sparse [-r readsize] [-w writesize] [-n step] [-a align] [-i num_aio] filename
- */
-
-int main(int argc, char **argv)
-{
-	char filename[PATH_MAX];
-	long alignment = 512;
-	int readsize = 65536;
-	int writesize = 65536;
-	int filesize = 100*1024*1024;
-	int num_aio = 16;
-	int step = 5*1024*1024;
-	int c, direct = O_DIRECT, keep = 0, sparse = 1;
-	extern char *optarg;
-	extern int optind, optopt, opterr;
-
-	while ((c = getopt(argc, argv, "dr:w:n:a:s:i:DkS")) != -1) {
-		char *endp;
-		switch (c) {
-		case 'D':
-			direct = 0;
-			break;
-		case 'k':
-			keep = 1;
-			break;
-		case 'S':
-			sparse = 0;
-			break;
-		case 'd':
-			debug++;
-			break;
-		case 'i':
-			num_aio = atoi(optarg);
-			break;
-		case 'a':
-			alignment = strtol(optarg, &endp, 0);
-			alignment = (int)scale_by_kmg((long long)alignment,
-                                                        *endp);
-			break;
-		case 'r':
-			readsize = strtol(optarg, &endp, 0);
-			readsize = (int)scale_by_kmg((long long)readsize, *endp);
-			break;
-		case 'w':
-			writesize = strtol(optarg, &endp, 0);
-			writesize = (int)scale_by_kmg((long long)writesize, *endp);
-			break;
-		case 's':
-			filesize = strtol(optarg, &endp, 0);
-			filesize = (int)scale_by_kmg((long long)filesize, *endp);
-			break;
-		case 'n':
-			step = strtol(optarg, &endp, 0);
-			step = (int)scale_by_kmg((long long)step, *endp);
-			break;
-		case '?':
-			usage();
-			break;
-		}

diff --git a/198 b/198
index 242ac9e..bfa71a0 100755
--- a/198
+++ b/198
@@ -43,7 +43,7 @@ _cleanup()
 . ./common.filter
 
 # This should actually run on anything that supports O_DIRECT + AIO...
-_supported_fs xfs
+_supported_fs generic
 _supported_os Linux
 
 echo "Silence is golden."
@@ -52,7 +52,7 @@ echo "Silence is golden."
 rm -f $seq.full
 
 rm -f "$TEST_DIR/aiodio_sparse*"
-$here/src/aiodio_sparse2 "$TEST_DIR/aiodio_sparse"
+$here/src/aio-dio-regress/aiodio_sparse2 "$TEST_DIR/aiodio_sparse"
 
 status=$?
 exit
diff --git a/group b/group
index 4391a4a..439a6e6 100644
--- a/group
+++ b/group
@@ -307,6 +307,7 @@ prealloc
 195 ioctl dump auto quick
 196 quota auto quick
 197 dir auto quick
+198 aio auto
 199 mount auto quick
 200 mount auto quick
 201 metadata auto quick
diff --git a/src/aio-dio-regress/aiodio_sparse2.c b/src/aio-dio-regress/aiodio_sparse2.c
new file mode 100644
index 0000000..b56f91a
--- /dev/null
+++ b/src/aio-dio-regress/aiodio_sparse2.c
@@ -0,0 +1,384 @@
+/* gcc -g -Wall -O2 aiodio_sparse.c -o aiodio_sparse -laio */
+
+/*
+ * From http://developer.osdl.org/daniel/AIO/TESTS/aiodio_sparse.c
+ * With patch from https://bugzilla.redhat.com/attachment.cgi?id=142124
+ * (Bug https://bugzilla.redhat.com/show_bug.cgi?id=217098)
+ */
+
+#ifndef _GNU_SOURCE
+#define _GNU_SOURCE
+#endif
+#include <sys/types.h>
+#include <errno.h>
+#include <signal.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <limits.h>
+#include <sys/mman.h>
+#include <sys/wait.h>
+
+#include <libaio.h>
+
+int debug;
+
+/*
+ * aiodio_sparse - issue async O_DIRECT writes to holes is a file while
+ *	concurrently reading the file and checking that the read never reads
+ *	uninitailized data.
+ */
+
+unsigned char *check_zero(unsigned char *buf, int size)
+{
+	unsigned char *p;
+
+	p = buf;
+
+	while (size > 0) {
+		if (*buf != 1) {
+			fprintf(stderr, "non one buffer at buf[%ld] => 0x%02x,%02x,%02x,%02x\n",
+				(long)(buf - p), (unsigned int)buf[0],
+				size > 1 ? (unsigned int)buf[1] : 0,
+				size > 2 ? (unsigned int)buf[2] : 0,
+				size > 3 ? (unsigned int)buf[3] : 0);
+			if (debug)
+				fprintf(stderr, "buf %p, p %p\n", buf, p);
+			return buf;
+		}
+		buf++;
+		size--;
+	}
+	return 0;	/* all zeros */
+}
+
+volatile int got_signal;
+
+void
+sig_term_func(int i, siginfo_t *si, void *p)
+{
+	if (debug)
+		fprintf(stderr, "sig(%d, %p, %p)\n", i, si, p);
+	got_signal++;
+}
+
+/*
+ * do async DIO writes to a sparse file
+ */
+void aiodio_sparse(char *filename, int align, int writesize, int filesize, int num_aio, int step, int sparse, int direct, int keep)
+{
+	int fd;
+	void *bufptr;
+	int i;
+	int w;
+	static struct sigaction s;
+	struct iocb **iocbs;
+	off_t offset;
+	io_context_t myctx;
+	struct io_event event;
+	int aio_inflight;
+
+	s.sa_sigaction = sig_term_func;
+	s.sa_flags = SA_SIGINFO;
+	sigaction(SIGTERM, &s, 0);
+
+	if ((num_aio * step) > filesize) {
+		num_aio = filesize / step;
+	}
+	memset(&myctx, 0, sizeof(myctx));
+	io_queue_init(num_aio, &myctx);
+
+	iocbs = (struct iocb **)calloc(num_aio, sizeof(struct iocb *));
+	for (i = 0; i < num_aio; i++) {
+		if ((iocbs[i] = (struct iocb *)calloc(1, sizeof(struct iocb))) == 0) {
+			perror("cannot malloc iocb");
+			return;
+		}
+	}
+
+	fd = open(filename, direct|O_WRONLY|O_CREAT, 0666);
+
+	if (fd < 0) {
+		perror("cannot create file");
+		return;
+	}
+
+	if (sparse)
+		ftruncate(fd, filesize);
+
+	/*
+	 * allocate the iocbs array and iocbs with buffers
+	 */
+	offset = 0;
+	for (i = 0; i < num_aio; i++) {
+		void *bufptr;
+
+		if (posix_memalign(&bufptr, align, writesize)) {
+			perror("cannot malloc aligned memory");
+			close(fd);
+			unlink(filename);
+			return;
+		}
+		memset(bufptr, 1, writesize);
+		io_prep_pwrite(iocbs[i], fd, bufptr, writesize, offset);
+		offset += step;
+	}
+
+	/*
+	 * start the 1st num_aio write requests
+	 */
+	if ((w = io_submit(myctx, num_aio, iocbs)) < 0) {
+		perror("io_submit failed");
+		close(fd);
+		unlink(filename);
+		return;
+	}
+	if (debug)
+		fprintf(stderr, "io_submit() return %d\n", w);
+
+	/*
+	 * As AIO requests finish, keep issuing more AIO until done.
+	 */
+	aio_inflight = num_aio;
+	if (debug)
+		fprintf(stderr, "aiodio_sparse: %d i/o in flight\n", aio_inflight);
+	while (offset < filesize)  {
+		int n;
+		struct iocb *iocbp;
+
+		if (debug)
+			fprintf(stderr, "aiodio_sparse: offset %lld filesize %d inflight %d\n",
+				(long long)offset, filesize, aio_inflight);
+
+		if ((n = io_getevents(myctx, 1, 1, &event, 0)) != 1) {
+			if (-n != EINTR)
+				fprintf(stderr, "io_getevents() returned %d\n", n);
+			break;
+		}
+		if (debug)
+			fprintf(stderr, "aiodio_sparse: io_getevent() returned %d\n", n);
+		aio_inflight--;
+		if (got_signal)
+			break;		/* told to stop */
+		/*
+		 * check if write succeeded.
+		 */
+		iocbp = event.obj;
+		if (event.res2 != 0 || event.res != iocbp->u.c.nbytes) {
+			fprintf(stderr,
+				"AIO write offset %lld expected %ld got %ld\n",
+				iocbp->u.c.offset, iocbp->u.c.nbytes,
+				event.res);
+			break;
+		}
+		if (debug)
+			fprintf(stderr, "aiodio_sparse: io_getevent() res %ld res2 %ld\n",
+				event.res, event.res2);
+
+		/* start next write */
+		io_prep_pwrite(iocbp, fd, iocbp->u.c.buf, writesize, offset);
+		offset += step;
+		if ((w = io_submit(myctx, 1, &iocbp)) < 0) {
+			fprintf(stderr, "io_submit failed at offset %lld\n",
+				(long long)offset);
+			perror("");
+			break;
+		}
+		if (debug)
+			fprintf(stderr, "io_submit() return %d\n", w);
+		aio_inflight++;
+	}
+
+	/*
+	 * wait for AIO requests in flight.
+	 */
+	while (aio_inflight > 0) {
+		int n;
+		struct iocb *iocbp;
+
+		if ((n = io_getevents(myctx, 1, 1, &event, 0)) != 1) {
+			perror("io_getevents failed");
+			break;
+		}
+		aio_inflight--;
+		/*
+		 * check if write succeeded.
+		 */
+		iocbp = event.obj;
+		if (event.res2 != 0 || event.res != iocbp->u.c.nbytes) {
+			fprintf(stderr,
+				"AIO write offset %lld expected %ld got %ld\n",
+				iocbp->u.c.offset, iocbp->u.c.nbytes,
+				event.res);
+		}
+	}
+	if (debug)
+		fprintf(stderr, "AIO DIO write done\n");
+	close(fd);
+	if ((fd = open(filename, O_RDONLY)) < 0)
+		exit(1);
+
+	bufptr = malloc(writesize);
+	for (offset = 0; offset < filesize; offset += step)  {
+		unsigned char *badbuf;
+
+		lseek(fd, offset, SEEK_SET);
+		if (read(fd, bufptr, writesize) < writesize) {
+			fprintf(stderr, "short read() at offset %lld\n",
+				(long long) offset);
+			exit(11);
+		}
+		if ((badbuf = check_zero(bufptr, writesize))) {
+			fprintf(stderr, "non-one read at offset %lld\n",
+				(long long)(offset + badbuf - (unsigned char*)bufptr));
+			fprintf(stderr, "*** WARNING *** %s has not been unlinked; if you don't rm it manually first, it may influence the next run\n", filename);
+			exit(10);
+		}
+	}
+	close(fd);
+	if (!keep)
+		unlink(filename);
+	else
+		fprintf(stderr, "*** WARNING *** You requested %s not to be unlinked; if you don't rm it manually first, it may influence the next run\n", filename);
+}
+
+void dirty_freeblocks(char *filename, int size)
+{
+	int fd;
+	void *p;
+	int pg;
+	char filename2[PATH_MAX];
+
+	pg = getpagesize();
+	size = ((size + pg - 1) / pg) * pg;
+	sprintf(filename2, "%s.xx.%d", filename, getpid());
+	fd = open(filename2, O_CREAT|O_RDWR, 0666);
+	if (fd < 0) {
+		perror("cannot open file");
+		exit(2);
+	}
+	ftruncate(fd, size);
+	p = mmap(0, size, PROT_WRITE|PROT_READ, MAP_SHARED|MAP_FILE, fd, 0);
+	if (p == MAP_FAILED) {
+		perror("cannot mmap");
+		exit(2);
+	}
+	memset(p, 0xaa, size);
+	msync(p, size, MS_SYNC);
+	munmap(p, size);
+	close(fd);
+	unlink(filename2);
+}
+
+void usage()
+{
+	fprintf(stderr, "usage: dio_sparse [-n step] [-s filesize]"
+		" [-w writesize] [-r readsize] filename\n");
+	exit(1);
+}
+
+/*
+ * Scale value by kilo, mega, or giga.
+ */
+long long scale_by_kmg(long long value, char scale)
+{
+	switch (scale) {
+	case 'g':
+	case 'G':
+		value *= 1024;
+	case 'm':
+	case 'M':
+		value *= 1024;
+	case 'k':
+	case 'K':
+		value *= 1024;
+		break;
+	case '\0':
+		break;
+	default:
+		usage();
+		break;
+	}
+	return value;
+}
+
+/*
+ *	usage:
+ * aiodio_sparse [-r readsize] [-w writesize] [-n step] [-a align] [-i num_aio] filename
+ */
+
+int main(int argc, char **argv)
+{
+	char filename[PATH_MAX];
+	long alignment = 512;
+	int readsize = 65536;
+	int writesize = 65536;
+	int filesize = 100*1024*1024;
+	int num_aio = 16;
+	int step = 5*1024*1024;
+	int c, direct = O_DIRECT, keep = 0, sparse = 1;
+	extern char *optarg;
+	extern int optind, optopt, opterr;
+
+	while ((c = getopt(argc, argv, "dr:w:n:a:s:i:DkS")) != -1) {
+		char *endp;
+		switch (c) {
+		case 'D':
+			direct = 0;
+			break;
+		case 'k':
+			keep = 1;
+			break;
+		case 'S':
+			sparse = 0;
+			break;
+		case 'd':
+			debug++;
+			break;
+		case 'i':
+			num_aio = atoi(optarg);
+			break;
+		case 'a':
+			alignment = strtol(optarg, &endp, 0);
+			alignment = (int)scale_by_kmg((long long)alignment,
+                                                        *endp);
+			break;
+		case 'r':
+			readsize = strtol(optarg, &endp, 0);
+			readsize = (int)scale_by_kmg((long long)readsize, *endp);
+			break;
+		case 'w':
+			writesize = strtol(optarg, &endp, 0);
+			writesize = (int)scale_by_kmg((long long)writesize, *endp);
+			break;
+		case 's':
+			filesize = strtol(optarg, &endp, 0);
+			filesize = (int)scale_by_kmg((long long)filesize, *endp);
+			break;
+		case 'n':
+			step = strtol(optarg, &endp, 0);
+			step = (int)scale_by_kmg((long long)step, *endp);
+			break;
+		case '?':
+			usage();
+			break;
+		}
+	}
+
+	strncpy(filename, argv[argc-1], PATH_MAX);
+
+	/*
+	 * Create some dirty free blocks by allocating, writing, syncing,
+	 * and then unlinking and freeing.
+	 */
+	dirty_freeblocks(filename, filesize);
+
+	/*
+	 * Parent write to a hole in a file using async direct i/o
+	 */
+
+	aiodio_sparse(filename, alignment, writesize, filesize, num_aio, step, sparse, direct, keep);
+
+	return 0;
+}
diff --git a/src/aiodio_sparse2.c b/src/aiodio_sparse2.c
deleted file mode 100644
index b56f91a..0000000
--- a/src/aiodio_sparse2.c
+++ /dev/null
@@ -1,384 +0,0 @@
-/* gcc -g -Wall -O2 aiodio_sparse.c -o aiodio_sparse -laio */
-
-/*
- * From http://developer.osdl.org/daniel/AIO/TESTS/aiodio_sparse.c
- * With patch from https://bugzilla.redhat.com/attachment.cgi?id=142124
- * (Bug https://bugzilla.redhat.com/show_bug.cgi?id=217098)
- */
-
-#ifndef _GNU_SOURCE
-#define _GNU_SOURCE
-#endif
-#include <sys/types.h>
-#include <errno.h>
-#include <signal.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <limits.h>
-#include <sys/mman.h>
-#include <sys/wait.h>
-
-#include <libaio.h>
-
-int debug;
-
-/*
- * aiodio_sparse - issue async O_DIRECT writes to holes is a file while
- *	concurrently reading the file and checking that the read never reads
- *	uninitailized data.
- */
-
-unsigned char *check_zero(unsigned char *buf, int size)
-{
-	unsigned char *p;
-
-	p = buf;
-
-	while (size > 0) {
-		if (*buf != 1) {
-			fprintf(stderr, "non one buffer at buf[%ld] => 0x%02x,%02x,%02x,%02x\n",
-				(long)(buf - p), (unsigned int)buf[0],
-				size > 1 ? (unsigned int)buf[1] : 0,
-				size > 2 ? (unsigned int)buf[2] : 0,
-				size > 3 ? (unsigned int)buf[3] : 0);
-			if (debug)
-				fprintf(stderr, "buf %p, p %p\n", buf, p);
-			return buf;
-		}
-		buf++;
-		size--;
-	}
-	return 0;	/* all zeros */
-}
-
-volatile int got_signal;
-
-void
-sig_term_func(int i, siginfo_t *si, void *p)
-{
-	if (debug)
-		fprintf(stderr, "sig(%d, %p, %p)\n", i, si, p);
-	got_signal++;
-}
-
-/*
- * do async DIO writes to a sparse file
- */
-void aiodio_sparse(char *filename, int align, int writesize, int filesize, int num_aio, int step, int sparse, int direct, int keep)
-{
-	int fd;
-	void *bufptr;
-	int i;
-	int w;
-	static struct sigaction s;
-	struct iocb **iocbs;
-	off_t offset;
-	io_context_t myctx;
-	struct io_event event;
-	int aio_inflight;
-
-	s.sa_sigaction = sig_term_func;
-	s.sa_flags = SA_SIGINFO;
-	sigaction(SIGTERM, &s, 0);
-
-	if ((num_aio * step) > filesize) {
-		num_aio = filesize / step;
-	}
-	memset(&myctx, 0, sizeof(myctx));
-	io_queue_init(num_aio, &myctx);
-
-	iocbs = (struct iocb **)calloc(num_aio, sizeof(struct iocb *));
-	for (i = 0; i < num_aio; i++) {
-		if ((iocbs[i] = (struct iocb *)calloc(1, sizeof(struct iocb))) == 0) {
-			perror("cannot malloc iocb");
-			return;
-		}
-	}
-
-	fd = open(filename, direct|O_WRONLY|O_CREAT, 0666);
-
-	if (fd < 0) {
-		perror("cannot create file");
-		return;
-	}
-
-	if (sparse)
-		ftruncate(fd, filesize);
-
-	/*
-	 * allocate the iocbs array and iocbs with buffers
-	 */
-	offset = 0;
-	for (i = 0; i < num_aio; i++) {
-		void *bufptr;
-
-		if (posix_memalign(&bufptr, align, writesize)) {
-			perror("cannot malloc aligned memory");
-			close(fd);
-			unlink(filename);
-			return;
-		}
-		memset(bufptr, 1, writesize);
-		io_prep_pwrite(iocbs[i], fd, bufptr, writesize, offset);
-		offset += step;
-	}
-
-	/*
-	 * start the 1st num_aio write requests
-	 */
-	if ((w = io_submit(myctx, num_aio, iocbs)) < 0) {
-		perror("io_submit failed");
-		close(fd);
-		unlink(filename);
-		return;
-	}
-	if (debug)
-		fprintf(stderr, "io_submit() return %d\n", w);
-
-	/*
-	 * As AIO requests finish, keep issuing more AIO until done.
-	 */
-	aio_inflight = num_aio;
-	if (debug)
-		fprintf(stderr, "aiodio_sparse: %d i/o in flight\n", aio_inflight);
-	while (offset < filesize)  {
-		int n;
-		struct iocb *iocbp;
-
-		if (debug)
-			fprintf(stderr, "aiodio_sparse: offset %lld filesize %d inflight %d\n",
-				(long long)offset, filesize, aio_inflight);
-
-		if ((n = io_getevents(myctx, 1, 1, &event, 0)) != 1) {
-			if (-n != EINTR)
-				fprintf(stderr, "io_getevents() returned %d\n", n);
-			break;
-		}
-		if (debug)
-			fprintf(stderr, "aiodio_sparse: io_getevent() returned %d\n", n);
-		aio_inflight--;
-		if (got_signal)
-			break;		/* told to stop */
-		/*
-		 * check if write succeeded.
-		 */
-		iocbp = event.obj;
-		if (event.res2 != 0 || event.res != iocbp->u.c.nbytes) {
-			fprintf(stderr,
-				"AIO write offset %lld expected %ld got %ld\n",
-				iocbp->u.c.offset, iocbp->u.c.nbytes,
-				event.res);
-			break;
-		}
-		if (debug)
-			fprintf(stderr, "aiodio_sparse: io_getevent() res %ld res2 %ld\n",
-				event.res, event.res2);
-
-		/* start next write */
-		io_prep_pwrite(iocbp, fd, iocbp->u.c.buf, writesize, offset);
-		offset += step;
-		if ((w = io_submit(myctx, 1, &iocbp)) < 0) {
-			fprintf(stderr, "io_submit failed at offset %lld\n",
-				(long long)offset);
-			perror("");
-			break;
-		}
-		if (debug)
-			fprintf(stderr, "io_submit() return %d\n", w);
-		aio_inflight++;
-	}
-
-	/*
-	 * wait for AIO requests in flight.
-	 */
-	while (aio_inflight > 0) {
-		int n;
-		struct iocb *iocbp;
-
-		if ((n = io_getevents(myctx, 1, 1, &event, 0)) != 1) {
-			perror("io_getevents failed");
-			break;
-		}
-		aio_inflight--;
-		/*
-		 * check if write succeeded.
-		 */
-		iocbp = event.obj;
-		if (event.res2 != 0 || event.res != iocbp->u.c.nbytes) {
-			fprintf(stderr,
-				"AIO write offset %lld expected %ld got %ld\n",
-				iocbp->u.c.offset, iocbp->u.c.nbytes,
-				event.res);
-		}
-	}
-	if (debug)
-		fprintf(stderr, "AIO DIO write done\n");
-	close(fd);
-	if ((fd = open(filename, O_RDONLY)) < 0)
-		exit(1);
-
-	bufptr = malloc(writesize);
-	for (offset = 0; offset < filesize; offset += step)  {
-		unsigned char *badbuf;
-
-		lseek(fd, offset, SEEK_SET);
-		if (read(fd, bufptr, writesize) < writesize) {
-			fprintf(stderr, "short read() at offset %lld\n",
-				(long long) offset);
-			exit(11);
-		}
-		if ((badbuf = check_zero(bufptr, writesize))) {
-			fprintf(stderr, "non-one read at offset %lld\n",
-				(long long)(offset + badbuf - (unsigned char*)bufptr));
-			fprintf(stderr, "*** WARNING *** %s has not been unlinked; if you don't rm it manually first, it may influence the next run\n", filename);
-			exit(10);
-		}
-	}
-	close(fd);
-	if (!keep)
-		unlink(filename);
-	else
-		fprintf(stderr, "*** WARNING *** You requested %s not to be unlinked; if you don't rm it manually first, it may influence the next run\n", filename);
-}
-
-void dirty_freeblocks(char *filename, int size)
-{
-	int fd;
-	void *p;
-	int pg;
-	char filename2[PATH_MAX];
-
-	pg = getpagesize();
-	size = ((size + pg - 1) / pg) * pg;
-	sprintf(filename2, "%s.xx.%d", filename, getpid());
-	fd = open(filename2, O_CREAT|O_RDWR, 0666);
-	if (fd < 0) {
-		perror("cannot open file");
-		exit(2);
-	}
-	ftruncate(fd, size);
-	p = mmap(0, size, PROT_WRITE|PROT_READ, MAP_SHARED|MAP_FILE, fd, 0);
-	if (p == MAP_FAILED) {
-		perror("cannot mmap");
-		exit(2);
-	}
-	memset(p, 0xaa, size);
-	msync(p, size, MS_SYNC);
-	munmap(p, size);
-	close(fd);
-	unlink(filename2);
-}
-
-void usage()
-{
-	fprintf(stderr, "usage: dio_sparse [-n step] [-s filesize]"
-		" [-w writesize] [-r readsize] filename\n");
-	exit(1);
-}
-
-/*
- * Scale value by kilo, mega, or giga.
- */
-long long scale_by_kmg(long long value, char scale)
-{
-	switch (scale) {
-	case 'g':
-	case 'G':
-		value *= 1024;
-	case 'm':
-	case 'M':
-		value *= 1024;
-	case 'k':
-	case 'K':
-		value *= 1024;
-		break;
-	case '\0':
-		break;
-	default:
-		usage();
-		break;
-	}
-	return value;
-}
-
-/*
- *	usage:
- * aiodio_sparse [-r readsize] [-w writesize] [-n step] [-a align] [-i num_aio] filename
- */
-
-int main(int argc, char **argv)
-{
-	char filename[PATH_MAX];
-	long alignment = 512;
-	int readsize = 65536;
-	int writesize = 65536;
-	int filesize = 100*1024*1024;
-	int num_aio = 16;
-	int step = 5*1024*1024;
-	int c, direct = O_DIRECT, keep = 0, sparse = 1;
-	extern char *optarg;
-	extern int optind, optopt, opterr;
-
-	while ((c = getopt(argc, argv, "dr:w:n:a:s:i:DkS")) != -1) {
-		char *endp;
-		switch (c) {
-		case 'D':
-			direct = 0;
-			break;
-		case 'k':
-			keep = 1;
-			break;
-		case 'S':
-			sparse = 0;
-			break;
-		case 'd':
-			debug++;
-			break;
-		case 'i':
-			num_aio = atoi(optarg);
-			break;
-		case 'a':
-			alignment = strtol(optarg, &endp, 0);
-			alignment = (int)scale_by_kmg((long long)alignment,
-                                                        *endp);
-			break;
-		case 'r':
-			readsize = strtol(optarg, &endp, 0);
-			readsize = (int)scale_by_kmg((long long)readsize, *endp);
-			break;
-		case 'w':
-			writesize = strtol(optarg, &endp, 0);
-			writesize = (int)scale_by_kmg((long long)writesize, *endp);
-			break;
-		case 's':
-			filesize = strtol(optarg, &endp, 0);
-			filesize = (int)scale_by_kmg((long long)filesize, *endp);
-			break;
-		case 'n':
-			step = strtol(optarg, &endp, 0);
-			step = (int)scale_by_kmg((long long)step, *endp);
-			break;
-		case '?':
-			usage();
-			break;
-		}
-	}
-
-	strncpy(filename, argv[argc-1], PATH_MAX);
-
-	/*
-	 * Create some dirty free blocks by allocating, writing, syncing,
-	 * and then unlinking and freeing.
-	 */
-	dirty_freeblocks(filename, filesize);
-
-	/*
-	 * Parent write to a hole in a file using async direct i/o
-	 */
-
-	aiodio_sparse(filename, alignment, writesize, filesize, num_aio, step, sparse, direct, keep);
-
-	return 0;
-}

-	}
-
-	strncpy(filename, argv[argc-1], PATH_MAX);
-
-	/*
-	 * Create some dirty free blocks by allocating, writing, syncing,
-	 * and then unlinking and freeing.
-	 */
-	dirty_freeblocks(filename, filesize);
-
-	/*
-	 * Parent write to a hole in a file using async direct i/o
-	 */
-
-	aiodio_sparse(filename, alignment, writesize, filesize, num_aio, step, sparse, direct, keep);
-
-	return 0;
-}




More information about the xfs mailing list