[PATCH] xfstests: add tests to check log size scaling
Eric Sandeen
sandeen at sandeen.net
Mon Jul 6 23:11:02 CDT 2009
Christoph Hellwig wrote:
> XFS-QA test to check that log size scaling works correctly
> for old and new maximum log sizes.
>
> [hch: split into two testcases for old "small" log scaling and the
> large logs that require recent xfsprogs, and reduce the maximum
> size by 1GB to make it possible to run the test on 32 bit platforms]
>
> Signed-off-by: Dave Chinner <dgc at sgi.com>
> Signed-off-by: Christoph Hellwig <hch at lst.de>
minor question below
>
> Index: xfstests-dev/216
> ===================================================================
> --- /dev/null 1970-01-01 00:00:00.000000000 +0000
> +++ xfstests-dev/216 2009-07-05 09:11:49.000000000 +0000
> @@ -0,0 +1,79 @@
> +#! /bin/sh
> +# FS QA Test No. 216
> +#
> +# log size mkfs test - ensure the log size scaling works for small filesystems
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +#-----------------------------------------------------------------------
> +#
> +# creator
> +owner=dgc at sgi.com
> +
> +seq=`basename $0`
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.*
> + _cleanup_testdir
> +}
> +
> +# get standard environment, filters and checks
> +. ./common.rc
> +. ./common.filter
> +
> +# real QA test starts here
> +_supported_fs xfs
> +_supported_os Linux
> +
> +_setup_testdir
> +_require_scratch
> +_scratch_mkfs_xfs >/dev/null 2>&1
> +_scratch_mount
Any reason to do this on the scratch dir vs. the test dir? (Since
scratch dir became optional, I figure stuff that can go on the test dev
instead, probably should?)
not a big deal, it looks fine otherwise.
-Eric
> +_require_loop
> +LOOP_DEV=$SCRATCH_MNT/test_fs
> +LOOP_MNT=$SCRATCH_MNT/test_fs_dir
> +
> +_do_mkfs()
> +{
> + for i in $*; do
> + echo -n "fssize=${i}g "
> + $MKFS_XFS_PROG -f -b size=4096 -l version=2 \
> + -d name=$LOOP_DEV,size=${i}g |grep log
> + mount -o loop -t xfs $LOOP_DEV $LOOP_MNT
> + echo "test write" > $LOOP_MNT/test
> + umount $LOOP_MNT
> + done
> +}
> +# make large holey file
> +$XFS_IO_PROG -f -c "truncate 256g" $LOOP_DEV
> +
> +#make loopback mount dir
> +mkdir $LOOP_MNT
> +
> +# walk over standard sizes (up to 256GB)
> +_do_mkfs 1 2 4 8 16 32 64 128 256
> +
> +status=0
> +exit
> Index: xfstests-dev/216.out
> ===================================================================
> --- /dev/null 1970-01-01 00:00:00.000000000 +0000
> +++ xfstests-dev/216.out 2009-07-05 09:07:36.000000000 +0000
> @@ -0,0 +1,10 @@
> +QA output created by 216
> +fssize=1g log =internal log bsize=4096 blocks=2560, version=2
> +fssize=2g log =internal log bsize=4096 blocks=2560, version=2
> +fssize=4g log =internal log bsize=4096 blocks=2560, version=2
> +fssize=8g log =internal log bsize=4096 blocks=2560, version=2
> +fssize=16g log =internal log bsize=4096 blocks=2560, version=2
> +fssize=32g log =internal log bsize=4096 blocks=4096, version=2
> +fssize=64g log =internal log bsize=4096 blocks=8192, version=2
> +fssize=128g log =internal log bsize=4096 blocks=16384, version=2
> +fssize=256g log =internal log bsize=4096 blocks=32768, version=2
> Index: xfstests-dev/group
> ===================================================================
> --- xfstests-dev.orig/group 2009-07-04 18:07:55.000000000 +0000
> +++ xfstests-dev/group 2009-07-05 09:16:04.000000000 +0000
> @@ -324,3 +324,5 @@
> 213 rw auto prealloc quick
> 214 rw auto prealloc quick
> 215 auto metadata quick
> +216 log metadata auto quick
> +217 log metadata auto
> Index: xfstests-dev/217
> ===================================================================
> --- /dev/null 1970-01-01 00:00:00.000000000 +0000
> +++ xfstests-dev/217 2009-07-05 09:26:57.000000000 +0000
> @@ -0,0 +1,89 @@
> +#! /bin/sh
> +# FS QA Test No. 217
> +#
> +# large log size mkfs test - ensure the log size scaling works
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +#-----------------------------------------------------------------------
> +#
> +# creator
> +owner=dgc at sgi.com
> +
> +seq=`basename $0`
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.*
> + _cleanup_testdir
> +}
> +
> +# get standard environment, filters and checks
> +. ./common.rc
> +. ./common.filter
> +
> +# real QA test starts here
> +_supported_fs xfs
> +_supported_os Linux
> +
> +_setup_testdir
> +_require_scratch
> +_scratch_mkfs_xfs >/dev/null 2>&1
> +_scratch_mount
> +
> +_require_loop
> +LOOP_DEV=$SCRATCH_MNT/test_fs
> +LOOP_MNT=$SCRATCH_MNT/test_fs_dir
> +
> +_do_mkfs()
> +{
> + for i in $*; do
> + echo -n "fssize=${i}g "
> + $MKFS_XFS_PROG -f -b size=4096 -l version=2 \
> + -d name=$LOOP_DEV,size=${i}g |grep log
> + mount -o loop -t xfs $LOOP_DEV $LOOP_MNT
> + echo "test write" > $LOOP_MNT/test
> + umount $LOOP_MNT
> + done
> +}
> +# make large holey file
> +$XFS_IO_PROG -f -c "truncate 16383g" $LOOP_DEV
> +
> +#make loopback mount dir
> +mkdir $LOOP_MNT
> +
> +# test if large logs are supported
> +$MKFS_XFS_PROG -f -l size=256m -d name=$LOOP_DEV,size=10g > /dev/null 2>&1
> +if [ $? -ne 0 ]; then
> + _notrun "large log sizes not supported by mkfs"
> +fi
> +
> +#
> +# walk over "new" sizes supported by recent xfsprogs.
> +# Note that the last test is for 16TB-1GB as 32bit platforms only support
> +# device slightly smaller than 16TB.
> +#
> +_do_mkfs 512 1024 2048 4096 8192 16383
> +
> +status=0
> +exit
> Index: xfstests-dev/217.out
> ===================================================================
> --- /dev/null 1970-01-01 00:00:00.000000000 +0000
> +++ xfstests-dev/217.out 2009-07-05 09:20:17.000000000 +0000
> @@ -0,0 +1,7 @@
> +QA output created by 217
> +fssize=512g log =internal log bsize=4096 blocks=65536, version=2
> +fssize=1024g log =internal log bsize=4096 blocks=131072, version=2
> +fssize=2048g log =internal log bsize=4096 blocks=262144, version=2
> +fssize=4096g log =internal log bsize=4096 blocks=521728, version=2
> +fssize=8192g log =internal log bsize=4096 blocks=521728, version=2
> +fssize=16383g log =internal log bsize=4096 blocks=521728, version=2
>
> _______________________________________________
> xfs mailing list
> xfs at oss.sgi.com
> http://oss.sgi.com/mailman/listinfo/xfs
>
More information about the xfs
mailing list