Failed to enter KDB on terminal program via key sequence "Ctrl-A"

[Chen, Yukun]

It works now. Thanx:)

Aaron

-----Original Message-----
From: Keith Owens [mailto:kaos at sgi.com] 
Sent: 2004Äê11ÔÂ3ÈÕ 10:45
To: Chen, Yukun
Cc: kdb at oss.sgi.com
Subject: Re: Failed to enter KDB on terminal program via key sequence "Ctrl-A" 

On Wed, 3 Nov 2004 10:14:36 +0800, 
"Chen, Yukun" <yukun.chen at intel.com> wrote:
>Keith
>	I use SLES9 SP1. I have tried the method u mentioned but it still dose =
>not work. I think it might be a bug of suse distribution and I will =
>report them it.

SLES9 SP1 has kdb v4.4 which uses <escape>KDB as the entry sequence.
It works fine for me on an ia64 box.

Remember that you must have a user program reading from the serial port
in order for the kernel to read anything over the serial line.  IOW,
you must be running getty or equvalent on the serial line.  This is an
annoying kernel restriction, if there is no user space program reading
from the serial port then the kernel ignores all serial input.


---------------------------
Use http://oss.sgi.com/ecartis to modify your settings or to unsubscribe.