Hi all,
Maybe I'm just stupid for even trying it yet, but 2.4.11 seems to get to the
stage between 'Mounting local filesystems' and before 'Enabling swap space'
in rc.sysinit.
You can hear it mount the local filesystems (~1second disk activity) and it
prints "OK" on the screen but that's it. The filesystems must have been
mounted, because they required recovery.
Have been using xfs (on linux) since late march on this box (and since on 4
others) but I don't know how to a) drop into kdb b) drive it (assume similar
to gdb, which I've never got on with either :-)
If you need it, here's some info (if I've forgotten the bleeding obvious,
tell me :-)
Software info:
Machine is RedHat 7.1 + glibc (and other bits) from 7.1.94
gcc-2.96-85
Hardware info:
AMD Athlon Slot A
384MB RAM
Asus K7V motherboard
IDE disc
IDE CD-RW (using ide-scsi)
floppy, riva TNT2 GC, Netgear NIC,
external: printer, palm cradle, 56k external modem.
dmesg from running 2.4.9 kernel (rebuilt last week, because I bought a new
graphics card):
[root@pyewacket linux]# dmesg
Linux version 2.4.9-xfs (root@pyewacket) (gcc version 2.96 20000731 (Red Hat
Linux 7.1 2.96-85)) #2 Fri Oct 5 11:46:10 BST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017ffc000 (usable)
BIOS-e820: 0000000017ffc000 - 0000000017fff000 (ACPI data)
BIOS-e820: 0000000017fff000 - 0000000018000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
Scan SMP from c009fc00 for 4096 bytes.
On node 0 totalpages: 98300
zone(0): 4096 pages.
zone(1): 94204 pages.
zone(2): 0 pages.
mapped APIC to ffffe000 (fee00000)
Kernel command line: auto BOOT_IMAGE=stable ro root=302
BOOT_FILE=/boot/vmlinuz-2.4.9-xfs-2 hdc=ide-scsi idebus=33 ide0=ata66
ide_setup: hdc=ide-scsi
ide_setup: idebus=33
ide_setup: ide0=ata66
Initializing CPU#0
Detected 700.035 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1395.91 BogoMIPS
Memory: 383692k/393200k available (1269k kernel code, 9120k reserved, 831k
data, 216k init, 0k highmem)
kdb version 1.8 by Scott Lurndal, Keith Owens. Copyright SGI, All Rights
Reserved
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0183f9ff c1c3f9ff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After vendor init, caps: 0183f9ff c1c3f9ff 00000000 00000000
CPU: After generic, caps: 0183f9ff c1c3f9ff 00000000 00000000
CPU: Common caps: 0183f9ff c1c3f9ff 00000000 00000000
CPU: AMD Athlon(tm) Processor stepping 01
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
Local APIC disabled by BIOS -- reenabling...
leaving PIC mode, enabling symmetric IO mode.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
calibrating APIC timer ...
..... CPU clock speed is 700.0634 MHz.
..... host bus clock speed is 200.0179 MHz.
cpu: 0, clocks: 2000179, slice: 1000089
CPU0<T0:2000176,T1:1000080,D:7,S:1000089,C:2000179>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf0880, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router VIA [1106/0686] at 00:04.0
PCI: Disabling Via external APIC routing
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
devfs: v0.107 (20010709) Richard Gooch (rgooch@xxxxxxxxxxxxx)
devfs: devfs_debug: 0x0
devfs: boot_options: 0x2
SGI XFS with EAs, no debug enabled
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI
enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: 128 slots per queue, batch=16
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes
VP_IDE: IDE controller on PCI bus 00 dev 21
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:04.1
VP_IDE: ATA-66/100 forced bit set (WARNING)!!
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
hda: IBM-DPTA-372050, ATA DISK drive
hdc: WPI CDRW-4424, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 40088160 sectors (20525 MB) w/1961KiB Cache, CHS=2495/255/63
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
natsemi.c:v1.07 1/9/2001 Written by Donald Becker <becker@xxxxxxxxx>
http://www.scyld.com/network/natsemi.html
(unofficial 2.4.x kernel port, version 1.07+LK1.0.8, Aug 07, 2001 Jeff
Garzik, Tjeerd Mulder)
PCI: Found IRQ 11 for device 00:0c.0
eth0: NatSemi DP83815 at 0xd8802000, 00:02:e3:12:42:3c, IRQ 11.
eth0: Transceiver status 0x7869 advertising 05e1.
PPP generic driver version 2.4.1
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Start mounting filesystem: ide0(3,2)
XFS: WARNING: recovery required on readonly filesystem.
XFS: write access will be enabled during mount.
Starting XFS recovery on filesystem: ide0(3,2) (dev: 3/2)
Ending XFS recovery on filesystem: ide0(3,2) (dev: 3/2)
VFS: Mounted root (xfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 216k freed
Adding Swap: 136512k swap-space (priority -1)
Adding Swap: 136512k swap-space (priority -2)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.259 $ time 11:55:39 Oct 5 2001
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 10 for device 00:04.2
PCI: Sharing IRQ 10 with 00:04.3
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 10 for device 00:04.3
PCI: Sharing IRQ 10 with 00:04.2
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.251:USB Universal Host Controller Interface driver
SCSI subsystem driver Revision: 1.00
Start mounting filesystem: ide0(3,1)
Ending clean XFS mount for filesystem: ide0(3,1)
Start mounting filesystem: ide0(3,9)
Ending clean XFS mount for filesystem: ide0(3,9)
Start mounting filesystem: ide0(3,8)
Ending clean XFS mount for filesystem: ide0(3,8)
Start mounting filesystem: ide0(3,7)
Starting XFS recovery on filesystem: ide0(3,7) (dev: 3/7)
Ending XFS recovery on filesystem: ide0(3,7) (dev: 3/7)
Adding Swap: 514040k swap-space (priority -3)
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: WPI Model: CDRW-4424 Rev: T2.0
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
spurious 8259A interrupt: IRQ7.
parport0: PC-style at 0x378 [PCSPP(,...)]
parport_pc: Via 686A parallel port: io=0x378
ip_tables: (c)2000 Netfilter core team
ip_conntrack (3071 buckets, 24568 max)
eth0: link is back. Enabling watchdog.
parport0: PC-style at 0x378 [PCSPP(,...)]
parport_pc: Via 686A parallel port: io=0x378
lp0: using parport0 (polling).
devfs: devfs_register(): device already registered: "2"
devfs: devfs_register(): device already registered: "a2"
[root@pyewacket linux]#
nic
|