Re: xfsdump INTERRUPT issue

[Jeffrey <grndlvl@xxxxxxxxx>]

Here's my output:

# xfs_repair -n -r /dev/sda3 /dev/sda2
Phase 1 - find and verify superblock...
Phase 2 - using internal log
        - scan filesystem freespace and inode maps...
        - found root inode chunk
Phase 3 - for each AG...
        - scan (but don't clear) agi unlinked lists...
        - process known inodes and perform inode discovery...
        - agno = 0
        - agno = 1
        - agno = 2
        - agno = 3
        - agno = 4
        - agno = 5
        - agno = 6
        - agno = 7
        - agno = 8
        - agno = 9
        - agno = 10
        - agno = 11
        - agno = 12
        - agno = 13
        - agno = 14
        - agno = 15
        - process newly discovered inodes...
Phase 4 - check for duplicate blocks...
        - setting up duplicate extent list...
        - check for inodes claiming duplicate blocks...
        - agno = 1
        - agno = 3
        - agno = 5
        - agno = 6
        - agno = 7
        - agno = 8
        - agno = 0
        - agno = 12
        - agno = 13
        - agno = 14
        - agno = 15
        - agno = 4
        - agno = 2
        - agno = 10
        - agno = 11
        - agno = 9
No modify flag set, skipping phase 5
Phase 6 - check inode connectivity...
        - traversing filesystem ...
        - traversal finished ...
        - moving disconnected inodes to lost+found ...
Phase 7 - verify link counts...
No modify flag set, skipping filesystem flush and exiting.

Best,
J.

On 12/22/2012 06:45 PM, Dave Chinner wrote:

On Sat, Dec 22, 2012 at 11:10:24AM -0500, Jeffrey wrote:

Ok, I tried running the command. Here's my output:

# xfs_repair -n -r /dev/sda2 /dev/sda3
# Phase 1 - find and verify superblock...
# bad primary superblock - bad magic number 111
#
# attempting to find secondary superblock...
# ................

and the dots are still just going after about 15 min.

What should I do?

Try pointing xfs_repair to the correct devices. From looking atthe
earlier xfs_info output you posted, you've told it the
realtime device is the data device and vice versa. i.e. you should
be running:

# xfs_repair -n -r /dev/sda3 /dev/sda2


Cheers,

Dave.