----- Original Message -----
> On Thu, 4 Oct 2012, Tomas Racek wrote:
>
> > Date: Thu, 4 Oct 2012 04:47:54 -0400 (EDT)
> > From: Tomas Racek <tracek@xxxxxxxxxx>
> > To: Lukáš Czerner <lczerner@xxxxxxxxxx>
> > Cc: xfs@xxxxxxxxxxx
> > Subject: Re: [PATCH v3] xfstests: Use upstream version of fstrim
> > instead of
> > the local one
> >
> > ----- Original Message -----
> > > On Wed, 15 Aug 2012, Tomas Racek wrote:
> > >
> > > > Date: Wed, 15 Aug 2012 15:00:45 +0200
> > > > From: Tomas Racek <tracek@xxxxxxxxxx>
> > > > To: xfs@xxxxxxxxxxx
> > > > Cc: lczerner@xxxxxxxxxx, Tomas Racek <tracek@xxxxxxxxxx>
> > > > Subject: [PATCH v3] xfstests: Use upstream version of fstrim
> > > > instead of the
> > > > local one
> > > >
> > > > Local version of fstrim was dropped so that we depend on
> > > > upstream
> > > > version which is now available via $FSTRIM_PROG.
> > > > _require_fstrim
> > > > was
> > > > added to check if fstrim is available in the system and
> > > > _test_batched_discard to check if we can run fstrim on certain
> > > > mountpoint.
> > > >
> > > > Also tests 251 and 260 were modified to reflect this change.
> > > >
> > > > Signed-off-by: Tomas Racek <tracek@xxxxxxxxxx>
> > > > ---
> > > > .gitignore | 1 -
> > > > 251 | 14 +--
> > > > 260 | 36 +++++----
> > > > 260.out | 8 +-
> > > > common.config | 1 +
> > > > common.rc | 13 +++
> > > > src/Makefile | 2 +-
> > > > src/fstrim.c | 257
> > > > ---------------------------------------------------------
> > > > 8 files changed, 45 insertions(+), 287 deletions(-)
> > > > delete mode 100644 src/fstrim.c
> > > >
> > > > diff --git a/.gitignore b/.gitignore
> > > > index 900ff95..c0e0e4c 100644
> > > > --- a/.gitignore
> > > > +++ b/.gitignore
> > > > @@ -37,7 +37,6 @@ src/fill
> > > > src/fill2
> > > > src/fs_perms
> > > > src/fstest
> > > > -src/fstrim
> > > > src/ftrunc
> > > > src/genhashnames
> > > > src/getdevicesize
> > > > diff --git a/251 b/251
> > > > index f46b6e2..dbb6ba7 100755
> > > > --- a/251
> > > > +++ b/251
> > > > @@ -44,6 +44,7 @@ mypid=$$
> > > > _supported_fs generic
> > > > _supported_os Linux
> > > > _require_scratch
> > > > +_require_fstrim
> > > > _scratch_mkfs >/dev/null 2>&1
> > > > _scratch_mount
> > > >
> > > > @@ -71,16 +72,11 @@ _fail()
> > > > kill $mypid 2> /dev/null
> > > > }
> > > >
> > > > -_check_fstrim_support()
> > > > -{
> > > > - $here/src/fstrim -l 10M $SCRATCH_MNT &> /dev/null
> > > > -}
> > >
> > > Good to see that you've replaced this with generic check.
> > >
> > > > -
> > > > _guess_max_minlen()
> > > > {
> > > > mmlen=100000
> > > > while [ $mmlen -gt 1 ]; do
> > > > - $here/src/fstrim -l $(($mmlen*2))k -m ${mmlen}k
> > > > $SCRATCH_MNT
> > > > &>
> > > > /dev/null && break
> > > > + $FSTRIM_PROG -l $(($mmlen*2))k -m ${mmlen}k
> > > > $SCRATCH_MNT &>
> > > > /dev/null && break
> > > > mmlen=$(($mmlen/2))
> > > > done
> > > > echo $mmlen
> > > > @@ -102,12 +98,12 @@ fstrim_loop()
> > > > minlen=$(((RANDOM*($RANDOM%2+1))%$mmlen))
> > > > start=$RANDOM
> > > > if [ $((RANDOM%10)) -gt 7 ]; then
> > > > - $here/src/fstrim $SCRATCH_MNT &
> > > > + $FSTRIM_PROG $SCRATCH_MNT &
> > > > fpid=$!
> > > > wait $fpid
> > > > fi
> > > > while [ $start -lt $fsize ] ; do
> > > > - $here/src/fstrim -m ${minlen}k -s ${start}k -l
> > > > ${step}k
> > > > $SCRATCH_MNT &
> > > > + $FSTRIM_PROG -m ${minlen}k -o ${start}k -l
> > > > ${step}k
> > > > $SCRATCH_MNT &
> > > > fpid=$!
> > > > wait $fpid
> > > > start=$(( $start + $step ))
> > > > @@ -157,7 +153,7 @@ content=$here
> > > >
> > > > # Check for FITRIM support
> > > > echo -n "Checking FITRIM support: "
> > > > -_check_fstrim_support || _notrun "FSTRIM is not supported"
> > > > +_test_batched_discard $SCRATCH_MNT || _notrun "FITRIM not
> > > > supported on $SCRATCH_DEV"
> > >
> > > good
> > >
> > > > echo "done."
> > > >
> > > > mkdir -p $tmp
> > > > diff --git a/260 b/260
> > > > index b005cd3..21aa866 100755
> > > > --- a/260
> > > > +++ b/260
> > > > @@ -41,13 +41,13 @@ mypid=$$
> > > > _supported_fs generic
> > > > _supported_os Linux
> > > > _require_math
> > > > +_require_fstrim
> > > >
> > > > _require_scratch
> > > > _scratch_mkfs >/dev/null 2>&1
> > > > _scratch_mount
> > > >
> > > > -FSTRIM="$here/src/fstrim"
> > > > -"$FSTRIM" -l 10M $SCRATCH_MNT &> /dev/null || _notrun "FSTRIM
> > > > is
> > > > not supported"
> > > > +_test_batched_discard $SCRATCH_MNT || _notrun "FITRIM not
> > > > supported on $SCRATCH_DEV"
> > > >
> > > > fssize=$(df -k | grep "$SCRATCH_MNT" | grep "$SCRATCH_DEV" |
> > > > awk
> > > > '{print $2}')
> > > >
> > > > @@ -59,20 +59,24 @@ max_64bit=$(_math "2^64 - 1")
> > > > # the file system
> > > >
> > > > echo "[+] Start beyond the end of fs (should fail)"
> > > > -"$FSTRIM" -s $beyond_eofs $SCRATCH_MNT
> > > > +out=$($FSTRIM_PROG -o $beyond_eofs $SCRATCH_MNT 2>&1)
> > > > [ $? -eq 0 ] && status=1
> > > > +echo -n $out | cut -d ":" -f3-
> > >
> > > I am not sure what is the point of this change ? Simply
> > > s/FSTRIM/FSTRIM_PROG/ should be fine right ? Also you change some
> > > of
> > > it but not all of it.
> >
> > The reason for this is that upstream fstrim prefixes error message
> > with path, that is:
> >
> > # fstrim -v -o `echo 2^64-1 | bc` /mnt/test/
> > fstrim: /mnt/test/: FITRIM ioctl failed: Invalid argument
> >
> > vs original:
> >
> > # ./fstrim -v -s `echo 2^64-1 | bc` /mnt/test/
> > fstrim: FSTRIM: Invalid argument
> >
> > And simple "$FSTRIM_PROG ... | cut ..." doesn't preserve (error)
> > return value.
> >
> > "should succeed" calls weren't changed because no output is
> > expected.
>
> Ok, so the reason is to strip the variable mount point from the
> error message. It sounds ok than.
>
> This makes me think that we maybe want to have a filter function to
> filter out all the variables such as SCRATCH_MNT, SCRATCH_DEV,
> TEST_DIR,
> TEST_DEV and maybe more and replace then with the some appropriate
> strings
> (SCRATCH_MNT etc. maybe?). I am sure more tests can benefit from this
> not
> needing to to the filtering on their own.
Oh, thanks for reminding me -- they already exist (see common.filter), I forgot
about them. I will use them in next version. ;-)
Tom
>
> >
> > > >
> > > > echo "[+] Start beyond the end of fs with len set (should
> > > > fail)"
> > > > -"$FSTRIM" -s $beyond_eofs -l1M $SCRATCH_MNT
> > > > +out=$($FSTRIM_PROG -o $beyond_eofs -l1M $SCRATCH_MNT 2>&1)
> > > > [ $? -eq 0 ] && status=1
> > > > +echo -n $out | cut -d ":" -f3-
> > >
> > > same here
> > >
> > > >
> > > > echo "[+] Start = 2^64-1 (should fail)"
> > > > -"$FSTRIM" -s $max_64bit $SCRATCH_MNT
> > > > +out=$($FSTRIM_PROG -o $max_64bit $SCRATCH_MNT 2>&1)
> > > > [ $? -eq 0 ] && status=1
> > > > +echo -n $out | cut -d ":" -f3-
> > >
> > > here
> > >
> > > >
> > > > echo "[+] Start = 2^64-1 and len is set (should fail)"
> > > > -"$FSTRIM" -s $max_64bit -l1M $SCRATCH_MNT
> > > > +out=$($FSTRIM_PROG -o $max_64bit -l1M $SCRATCH_MNT 2>&1)
> > > > [ $? -eq 0 ] && status=1
> > > > +echo -n $out | cut -d ":" -f3-
> > >
> > > and here.
> > >
> > > >
> > > > _scratch_unmount
> > > > _scratch_mkfs >/dev/null 2>&1
> > > > @@ -82,16 +86,16 @@ _scratch_mount
> > > > # since the length should be truncated
> > > >
> > > > echo "[+] Default length (should succeed)"
> > > > -"$FSTRIM" $SCRATCH_MNT
> > > > +$FSTRIM_PROG $SCRATCH_MNT
> > > > [ $? -ne 0 ] && status=1
> > > > echo "[+] Default length with start set (should succeed)"
> > > > -"$FSTRIM" -s10M $SCRATCH_MNT
> > > > +$FSTRIM_PROG -o10M $SCRATCH_MNT
> > > > [ $? -ne 0 ] && status=1
> > > > echo "[+] Length beyond the end of fs (should succeed)"
> > > > -"$FSTRIM" -l $beyond_eofs $SCRATCH_MNT
> > > > +$FSTRIM_PROG -l $beyond_eofs $SCRATCH_MNT
> > > > [ $? -ne 0 ] && status=1
> > > > echo "[+] Length beyond the end of fs with start set (should
> > > > succeed)"
> > > > -"$FSTRIM" -s10M -l $beyond_eofs $SCRATCH_MNT
> > > > +$FSTRIM_PROG -o10M -l $beyond_eofs $SCRATCH_MNT
> > > > [ $? -ne 0 ] && status=1
> > > >
> > > > _scratch_unmount
> > > > @@ -101,8 +105,9 @@ _scratch_mount
> > > > # This is a bit fuzzy, but since the file system is fresh
> > > > # there should be at least (fssize/2) free space to trim.
> > > > # This is supposed to catch wrong FITRIM argument handling
> > > > -out=$("$FSTRIM" -v -s10M $SCRATCH_MNT)
> > > > -bytes=${out%% *}
> > > > +out=$($FSTRIM_PROG -v -o10M $SCRATCH_MNT)
> > > > +nopref=${out##*: }
> > > > +bytes=${nopref%% *}
> >
> > It's similar here, just strip the path from the output.
> >
> > > >
> > > > if [ $bytes -gt $(_math "$fssize*1024") ]; then
> > > > status=1
> > > > @@ -155,7 +160,7 @@ _scratch_unmount
> > > > _scratch_mkfs >/dev/null 2>&1
> > > > _scratch_mount
> > > > # It should fail since $start is beyond the end of file system
> > > > -"$FSTRIM" -s$start -l10M $SCRATCH_MNT &> /dev/null
> > > > +$FSTRIM_PROG -o$start -l10M $SCRATCH_MNT &> /dev/null
> > > > if [ $? -eq 0 ]; then
> > > > status=1
> > > > echo "It seems that fs logic handling start"\
> > > > @@ -173,8 +178,9 @@ _scratch_mount
> > > > # It is because btrfs does not have not-yet-used parts of the
> > > > device
> > > > # mapped and since we got here right after the mkfs, there is
> > > > not
> > > > # enough free extents in the root tree.
> > > > -out=$("$FSTRIM" -v -l$len $SCRATCH_MNT)
> > > > -bytes=${out%% *}
> > > > +out=$($FSTRIM_PROG -v -l$len $SCRATCH_MNT)
> > > > +nopref=${out##*: }
> > > > +bytes=${nopref%% *}
> > > > if [ $bytes -le $(_math "$fssize*512") ] && [ $FSTYP !=
> > > > "btrfs" ];
> > > > then
> > > > status=1
> > > > echo "It seems that fs logic handling len argument overflows"
> > > > diff --git a/260.out b/260.out
> > > > index 199320a..cf0b14e 100644
> > > > --- a/260.out
> > > > +++ b/260.out
> > > > @@ -1,12 +1,12 @@
> > > > QA output created by 260
> > > > [+] Start beyond the end of fs (should fail)
> > > > -fstrim: FSTRIM: Invalid argument
> > > > + FITRIM ioctl failed: Invalid argument
> > > > [+] Start beyond the end of fs with len set (should fail)
> > > > -fstrim: FSTRIM: Invalid argument
> > > > + FITRIM ioctl failed: Invalid argument
> > > > [+] Start = 2^64-1 (should fail)
> > > > -fstrim: FSTRIM: Invalid argument
> > > > + FITRIM ioctl failed: Invalid argument
> > > > [+] Start = 2^64-1 and len is set (should fail)
> > > > -fstrim: FSTRIM: Invalid argument
> > > > + FITRIM ioctl failed: Invalid argument
> > > > [+] Default length (should succeed)
> > > > [+] Default length with start set (should succeed)
> > > > [+] Length beyond the end of fs (should succeed)
> > > > diff --git a/common.config b/common.config
> > > > index 7bed1c5..57f505d 100644
> > > > --- a/common.config
> > > > +++ b/common.config
> > > > @@ -158,6 +158,7 @@ export XFS_QUOTA_PROG="`set_prog_path
> > > > xfs_quota`"
> > > > export KILLALL_PROG="`set_prog_path killall`"
> > > > export INDENT_PROG="`set_prog_path indent`"
> > > > export XFS_COPY_PROG="`set_prog_path xfs_copy`"
> > > > +export FSTRIM_PROG="`set_prog_path fstrim`"
> > > >
> > > > # Generate a comparable xfsprogs version number in the form of
> > > > # major * 10000 + minor * 100 + release
> > > > diff --git a/common.rc b/common.rc
> > > > index 602513a..0d2f712 100644
> > > > --- a/common.rc
> > > > +++ b/common.rc
> > > > @@ -1778,6 +1778,19 @@ _devmgt_add()
> > > > echo ${tdl} > /sys/class/scsi_host/host${h}/scan || _fail
> > > > "Add
> > > > disk failed"
> > > > }
> > > >
> > > > +_require_fstrim()
> > > > +{
> > > > + if [ -z "$FSTRIM_PROG" ]; then
> > > > + _notrun "This test requires fstrim utility."
> > > > + fi
> > > > +}
> > > > +
> > > > +_test_batched_discard()
> > > > +{
> > >
> > > Something like this should be here:
> > >
> > > if [ $# -ne 1 ]
> > > then
> > > echo "Usage: _test_batched_discard mount_point" 1>&2
> > > exit 1
> > > fi
> >
> > OK, I will add this.
> >
> >
> > Tom
> >
> > >
> > > > + _require_fstrim
> > > > + $FSTRIM_PROG ${1} &>/dev/null
> > >
> > > It is ok I guess, we do not really need to specify the length
> > > argument
> > > since it should not take too long to discard the whole file
> > > system.
> > >
> > > Thanks!
> > > -Lukas
> > >
> > > > +}
> > > > +
> > > >
> > > > ################################################################################
> > > >
> > > > if [ "$iam" != new -a "$iam" != bench ]
> > > > diff --git a/src/Makefile b/src/Makefile
> > > > index 67250ee..9671a38 100644
> > > > --- a/src/Makefile
> > > > +++ b/src/Makefile
> > > > @@ -17,7 +17,7 @@ LINUX_TARGETS = xfsctl bstat t_mtab
> > > > getdevicesize
> > > > preallo_rw_pattern_reader \
> > > > preallo_rw_pattern_writer ftrunc trunc fs_perms testx
> > > > looptest \
> > > > locktest unwritten_mmap bulkstat_unlink_test t_stripealign \
> > > > bulkstat_unlink_test_modified t_dir_offset t_futimens
> > > > t_immutable
> > > > \
> > > > - stale_handle pwrite_mmap_blocked fstrim t_dir_offset2
> > > > + stale_handle pwrite_mmap_blocked t_dir_offset2
> > > >
> > > > SUBDIRS =
> > > >
> > > > diff --git a/src/fstrim.c b/src/fstrim.c
> > > > deleted file mode 100644
> > > > index e23bcb3..0000000
> > > > --- a/src/fstrim.c
> > > > +++ /dev/null
> > > > @@ -1,257 +0,0 @@
> > > > -/*
> > > > - * fstrim.c -- discard the part (or whole) of mounted
> > > > filesystem.
> > > > - *
> > > > - * Copyright (C) 2010 Red Hat, Inc., Lukas Czerner
> > > > <lczerner@xxxxxxxxxx>
> > > > - *
> > > > - * This program is free software: you can redistribute it
> > > > and/or
> > > > modify
> > > > - * it under the terms of the GNU General Public License as
> > > > published by
> > > > - * the Free Software Foundation, either version 2 of the
> > > > License,
> > > > or
> > > > - * (at your option) any later version.
> > > > - *
> > > > - * This program is distributed in the hope that it will be
> > > > useful,
> > > > - * but WITHOUT ANY WARRANTY; without even the implied warranty
> > > > of
> > > > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
> > > > the
> > > > - * GNU General Public License for more details.
> > > > - *
> > > > - * You should have received a copy of the GNU General Public
> > > > License
> > > > - * along with this program. If not, see
> > > > <http://www.gnu.org/licenses/>.
> > > > - *
> > > > - * This program uses FITRIM ioctl to discard parts or the
> > > > whole
> > > > filesystem
> > > > - * online (mounted). You can specify range (start and lenght)
> > > > to
> > > > be
> > > > - * discarded, or simply discard while filesystem.
> > > > - *
> > > > - * Usage: fstrim [options] <mount point>
> > > > - */
> > > > -
> > > > -#include <string.h>
> > > > -#include <unistd.h>
> > > > -#include <stdlib.h>
> > > > -#include <errno.h>
> > > > -#include <stdio.h>
> > > > -#include <stdint.h>
> > > > -#include <fcntl.h>
> > > > -#include <limits.h>
> > > > -#include <stdarg.h>
> > > > -#include <getopt.h>
> > > > -
> > > > -#include <sys/ioctl.h>
> > > > -#include <sys/stat.h>
> > > > -#include <linux/fs.h>
> > > > -
> > > > -#ifndef FITRIM
> > > > -struct fstrim_range {
> > > > - uint64_t start;
> > > > - uint64_t len;
> > > > - uint64_t minlen;
> > > > -};
> > > > -#define FITRIM _IOWR('X', 121, struct fstrim_range)
> > > > -#endif
> > > > -
> > > > -const char *program_name = "fstrim";
> > > > -
> > > > -struct options {
> > > > - struct fstrim_range *range;
> > > > - char mpoint[PATH_MAX];
> > > > - char verbose;
> > > > -};
> > > > -
> > > > -static void usage(void)
> > > > -{
> > > > - fprintf(stderr,
> > > > - "Usage: %s [-s start] [-l length] [-m minimum-extent]"
> > > > - " [-v] {mountpoint}\n\t"
> > > > - "-s Starting Byte to discard from\n\t"
> > > > - "-l Number of Bytes to discard from the start\n\t"
> > > > - "-m Minimum extent length to discard\n\t"
> > > > - "-v Verbose - number of discarded bytes\n",
> > > > - program_name);
> > > > -}
> > > > -
> > > > -static void err_exit(const char *fmt, ...)
> > > > -{
> > > > - va_list pvar;
> > > > - va_start(pvar, fmt);
> > > > - vfprintf(stderr, fmt, pvar);
> > > > - va_end(pvar);
> > > > - usage();
> > > > - exit(EXIT_FAILURE);
> > > > -}
> > > > -
> > > > -/**
> > > > - * Get the number from argument. It can be number followed by
> > > > - * units: k|K, m|M, g|G, t|T
> > > > - */
> > > > -static unsigned long long get_number(char **optarg)
> > > > -{
> > > > - char *opt, *end;
> > > > - unsigned long long number, max;
> > > > -
> > > > - /* get the max to avoid overflow */
> > > > - max = ULLONG_MAX / 1024;
> > > > - number = 0;
> > > > - opt = *optarg;
> > > > -
> > > > - if (*opt == '-') {
> > > > - err_exit("%s: %s (%s)\n", program_name,
> > > > - strerror(ERANGE), *optarg);
> > > > - }
> > > > -
> > > > - errno = 0;
> > > > - number = strtoull(opt, &end , 0);
> > > > - if (errno)
> > > > - err_exit("%s: %s (%s)\n", program_name,
> > > > - strerror(errno), *optarg);
> > > > -
> > > > - /*
> > > > - * Convert units to numbers. Fall-through stack is used for
> > > > units
> > > > - * so absence of breaks is intentional.
> > > > - */
> > > > - switch (*end) {
> > > > - case 'T': /* terabytes */
> > > > - case 't':
> > > > - if (number > max)
> > > > - err_exit("%s: %s (%s)\n", program_name,
> > > > - strerror(ERANGE), *optarg);
> > > > - number *= 1024;
> > > > - case 'G': /* gigabytes */
> > > > - case 'g':
> > > > - if (number > max)
> > > > - err_exit("%s: %s (%s)\n", program_name,
> > > > - strerror(ERANGE), *optarg);
> > > > - number *= 1024;
> > > > - case 'M': /* megabytes */
> > > > - case 'm':
> > > > - if (number > max)
> > > > - err_exit("%s: %s (%s)\n", program_name,
> > > > - strerror(ERANGE), *optarg);
> > > > - number *= 1024;
> > > > - case 'K': /* kilobytes */
> > > > - case 'k':
> > > > - if (number > max)
> > > > - err_exit("%s: %s (%s)\n", program_name,
> > > > - strerror(ERANGE), *optarg);
> > > > - number *= 1024;
> > > > - end++;
> > > > - case '\0': /* end of the string */
> > > > - break;
> > > > - default:
> > > > - err_exit("%s: %s (%s)\n", program_name,
> > > > - strerror(EINVAL), *optarg);
> > > > - return 0;
> > > > - }
> > > > -
> > > > - if (*end != '\0') {
> > > > - err_exit("%s: %s (%s)\n", program_name,
> > > > - strerror(EINVAL), *optarg);
> > > > - }
> > > > -
> > > > - return number;
> > > > -}
> > > > -
> > > > -static int parse_opts(int argc, char **argv, struct options
> > > > *opts)
> > > > -{
> > > > - int c;
> > > > -
> > > > - while ((c = getopt(argc, argv, "s:l:m:v")) != EOF) {
> > > > - switch (c) {
> > > > - case 's': /* starting point */
> > > > - opts->range->start = get_number(&optarg);
> > > > - break;
> > > > - case 'l': /* length */
> > > > - opts->range->len = get_number(&optarg);
> > > > - break;
> > > > - case 'm': /* minlen */
> > > > - opts->range->minlen = get_number(&optarg);
> > > > - break;
> > > > - case 'v': /* verbose */
> > > > - opts->verbose = 1;
> > > > - break;
> > > > - default:
> > > > - return EXIT_FAILURE;
> > > > - }
> > > > - }
> > > > -
> > > > - return 0;
> > > > -}
> > > > -
> > > > -int main(int argc, char **argv)
> > > > -{
> > > > - struct options *opts;
> > > > - struct stat sb;
> > > > - int fd, err = 0, ret = EXIT_FAILURE;
> > > > -
> > > > - opts = malloc(sizeof(struct options));
> > > > - if (!opts)
> > > > - err_exit("%s: malloc(): %s\n", program_name,
> > > > strerror(errno));
> > > > -
> > > > - opts->range = NULL;
> > > > - opts->verbose = 0;
> > > > -
> > > > - if (argc > 1)
> > > > - strncpy(opts->mpoint, argv[argc - 1],
> > > > sizeof(opts->mpoint));
> > > > -
> > > > - opts->range = calloc(1, sizeof(struct fstrim_range));
> > > > - if (!opts->range) {
> > > > - fprintf(stderr, "%s: calloc(): %s\n", program_name,
> > > > - strerror(errno));
> > > > - goto free_opts;
> > > > - }
> > > > -
> > > > - opts->range->len = ULLONG_MAX;
> > > > -
> > > > - if (argc > 2)
> > > > - err = parse_opts(argc, argv, opts);
> > > > -
> > > > - if (err) {
> > > > - usage();
> > > > - goto free_opts;
> > > > - }
> > > > -
> > > > - if (strnlen(opts->mpoint, 1) < 1) {
> > > > - fprintf(stderr, "%s: You have to specify mount
> > > > point.\n",
> > > > - program_name);
> > > > - usage();
> > > > - goto free_opts;
> > > > - }
> > > > -
> > > > - if (stat(opts->mpoint, &sb) == -1) {
> > > > - fprintf(stderr, "%s: %s: %s\n", program_name,
> > > > - opts->mpoint, strerror(errno));
> > > > - usage();
> > > > - goto free_opts;
> > > > - }
> > > > -
> > > > - if (!S_ISDIR(sb.st_mode)) {
> > > > - fprintf(stderr, "%s: %s: (%s)\n", program_name,
> > > > - opts->mpoint, strerror(ENOTDIR));
> > > > - usage();
> > > > - goto free_opts;
> > > > - }
> > > > -
> > > > - fd = open(opts->mpoint, O_RDONLY);
> > > > - if (fd < 0) {
> > > > - fprintf(stderr, "%s: open(%s): %s\n", program_name,
> > > > - opts->mpoint, strerror(errno));
> > > > - goto free_opts;
> > > > - }
> > > > -
> > > > - if (ioctl(fd, FITRIM, opts->range)) {
> > > > - fprintf(stderr, "%s: FSTRIM: %s\n", program_name,
> > > > - strerror(errno));
> > > > - goto free_opts;
> > > > - }
> > > > -
> > > > - if ((opts->verbose) && (opts->range))
> > > > - fprintf(stdout, "%llu Bytes were trimmed\n", (unsigned
> > > > long
> > > > long)opts->range->len);
> > > > -
> > > > - ret = EXIT_SUCCESS;
> > > > -
> > > > -free_opts:
> > > > - if (opts) {
> > > > - if (opts->range)
> > > > - free(opts->range);
> > > > - free(opts);
> > > > - }
> > > > -
> > > > - return ret;
> > > > -}
> > > >
> > >
> >
|