On Wed, Jul 24, 2013 at 05:07:29PM +0200, Jan Schmidt wrote:
> Basic send / receive functionality test for btrfs. Requires current
> version of fsstress built (-x support). Relies on fssum tool but can
> skip the test if it failed to build.
>
> Signed-off-by: Jan Schmidt <list.xfs@xxxxxxxxxxxxx>
> ---
> README | 3 +
> tests/btrfs/316 | 113
> +++++++++++++++++++++++++++++++++++++++++++++++++++
> tests/btrfs/316.out | 4 ++
> tests/btrfs/group | 1 +
> 4 files changed, 121 insertions(+), 0 deletions(-)
> create mode 100755 tests/btrfs/316
> create mode 100644 tests/btrfs/316.out
>
> diff --git a/README b/README
> index a49ca7c..d287f63 100644
> --- a/README
> +++ b/README
> @@ -26,6 +26,9 @@ Preparing system for tests (IRIX and Linux):
> http://www.extra.research.philips.com/udf/, then copy the udf_test
> binary to xfstests/src/. If you wish to disable UDF verification test
> set the environment variable DISABLE_UDF_TEST to 1.
> + - If you wish to run the btrfs send / receive components of the suite
> + install fssum from
> + git://git.kernel.org/pub/scm/linux/kernel/git/arne/far-progs.git
>
>
> - create one or two partitions to use for testing
> diff --git a/tests/btrfs/316 b/tests/btrfs/316
> new file mode 100755
> index 0000000..2e86428
> --- /dev/null
> +++ b/tests/btrfs/316
> @@ -0,0 +1,113 @@
> +#! /bin/bash
> +# FSQA Test No. 314
> +#
> +# Run fsstress to create a reasonably strange file system, make a
> +# snapshot (base) and run more fsstress. Then take another snapshot
> +# (incr) and send both snapshots to a temp file. Remake the file
> +# system and receive from the files. Check both states with fssum.
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (C) 2013 STRATO. All rights reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +#
> +#-----------------------------------------------------------------------
> +#
> +# creator
> +owner=list.btrfs@xxxxxxxxxxxxx
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=`mktemp -d`
> +status=1
> +
> +_cleanup()
> +{
> + echo "*** unmount"
> + umount $SCRATCH_MNT 2>/dev/null
> + rm -f $tmp.*
> +}
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# real QA test starts here
> +_need_to_be_root
> +_supported_fs btrfs
> +_supported_os Linux
> +_require_scratch
> +_require_command $FSSUM_PROG fssum
> +
> +rm -f $seqres.full
> +
> +workout()
> +{
> + fsz=$1
> + ops=$2
> +
> + umount $SCRATCH_DEV >/dev/null 2>&1
> + echo "*** mkfs -dsize=$fsz" >>$seqres.full
> + echo "" >>$seqres.full
> + _scratch_mkfs_sized $fsz >>$seqres.full 2>&1 \
> + || _fail "size=$fsz mkfs failed"
> + run_check _scratch_mount "-o noatime"
> +
> + run_check $FSSTRESS_PROG -d $SCRATCH_MNT -n $ops $FSSTRESS_AVOID -x \
> + "$BTRFS_UTIL_PROG subvol snap -r $SCRATCH_MNT $SCRATCH_MNT/base"
> +
> + run_check $BTRFS_UTIL_PROG subvol snap -r $SCRATCH_MNT $SCRATCH_MNT/incr
> +
> + echo "# $BTRFS_UTIL_PROG send $SCRATCH_MNT/base > $tmp/base.snap" \
> + >> $seqres.full
> + $BTRFS_UTIL_PROG send $SCRATCH_MNT/base > $tmp/base.snap 2>>
> $seqres.full \
> + || _fail "failed: '$@'"
> + echo "# $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base\
> + $SCRATCH_MNT/incr > $tmp/incr.snap" >> $seqres.full
> + $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base \
> + $SCRATCH_MNT/incr > $tmp/incr.snap 2>> $seqres.full \
> + || _fail "failed: '$@'"
> +
> + run_check $FSSUM_PROG -A -f -w $tmp/base.fssum $SCRATCH_MNT/base
> + run_check $FSSUM_PROG -A -f -w $tmp/incr.fssum -x
> $SCRATCH_MNT/incr/base \
> + $SCRATCH_MNT/incr
> +
> + umount $SCRATCH_DEV >/dev/null 2>&1
> + echo "*** mkfs -dsize=$fsz" >>$seqres.full
> + echo "" >>$seqres.full
> + _scratch_mkfs_sized $fsz >>$seqres.full 2>&1 \
> + || _fail "size=$fsz mkfs failed"
> + run_check _scratch_mount "-o noatime"
> +
> + run_check $BTRFS_UTIL_PROG receive $SCRATCH_MNT < $tmp/base.snap
> + run_check $FSSUM_PROG -r $tmp/base.fssum $SCRATCH_MNT/base
> +
> + run_check $BTRFS_UTIL_PROG receive $SCRATCH_MNT < $tmp/incr.snap
> + run_check $FSSUM_PROG -r $tmp/incr.fssum $SCRATCH_MNT/incr
> +}
> +
> +echo "*** test send / receive"
> +
> +fssize=`expr 2000 \* 1024 \* 1024`
> +ops=200
> +
> +workout $fssize $ops
> +
> +echo "*** done"
> +status=0
> +exit
> diff --git a/tests/btrfs/316.out b/tests/btrfs/316.out
> new file mode 100644
> index 0000000..4564c85
> --- /dev/null
> +++ b/tests/btrfs/316.out
> @@ -0,0 +1,4 @@
> +QA output created by 316
> +*** test send / receive
> +*** done
> +*** unmount
> diff --git a/tests/btrfs/group b/tests/btrfs/group
> index bc6c256..11d708a 100644
> --- a/tests/btrfs/group
> +++ b/tests/btrfs/group
> @@ -9,3 +9,4 @@
> 276 auto rw metadata
> 284 auto
> 307 auto quick
> +316 auto rw metadata
I applied and ran this locally and gave everything a look over, you can add
Reviewed-by: Josef Bacik <jbacik@xxxxxxxxxxxx>
Thanks,
Josef
|