Besides fail_at_unmount, all EIO error handling can stop umount
hanging on IO error too.
This case test EIO/max_retries and EIO/retry_timeout_seconds as
below:
1) fail_at_unmount=0 && \
EIO/max_retries=1 && \
EIO/retry_timeout_seconds=0
2) fail_at_unmount=0 && \
EIO/max_retries=-1 && \
EIO/retry_timeout_seconds=1
Make sure when fail_at_unmount=0, umount won't hang there.
Signed-off-by: Zorro Lang <zlang@xxxxxxxxxx>
---
tests/xfs/263 | 126 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
tests/xfs/263.out | 21 +++++++++
tests/xfs/group | 1 +
3 files changed, 148 insertions(+)
create mode 100755 tests/xfs/263
create mode 100644 tests/xfs/263.out
diff --git a/tests/xfs/263 b/tests/xfs/263
new file mode 100755
index 0000000..2df139c
--- /dev/null
+++ b/tests/xfs/263
@@ -0,0 +1,126 @@
+#! /bin/bash
+# FS QA Test 263
+#
+# Test XFS EIO error handling configuration. Stop XFS from retrying
+# to writeback forever when hit EIO.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2016 Red Hat, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+ _dmerror_cleanup
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/dmerror
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+_supported_fs xfs
+_supported_os Linux
+_require_dm_target error
+_require_scratch
+_require_fs_sysfs error/fail_at_unmount
+_require_fs_sysfs error/metadata/EIO/max_retries
+_require_fs_sysfs error/metadata/EIO/retry_timeout_seconds
+
+_scratch_mkfs >> $seqres.full 2>&1
+_dmerror_init
+
+do_test()
+{
+ local attr="$1"
+ local num=0
+
+ _dmerror_mount
+ reset_xfs_sysfs_error_handling $DMERROR_DEV
+ # Disable fail_at_unmount before test EIO error handling
+ _set_fs_sysfs_attr $DMERROR_DEV error/fail_at_unmount 0
+ echo -n "error/fail_at_unmount="
+ _get_fs_sysfs_attr $DMERROR_DEV error/fail_at_unmount
+
+ _set_fs_sysfs_attr $DMERROR_DEV $attr 1
+ num=`_get_fs_sysfs_attr $DMERROR_DEV $attr`
+ echo "$attr=$num"
+ # _fail the test if we fail to set $attr to 1, because the test
+ # probably will hang in such case and block subsequent tests.
+ if [ "$num" != "1" ]; then
+ _fail "Failed to set $attr: 1"
+ fi
+
+ # start a metadata-intensive workload, but no data allocation operation.
+ # Because uncompleted new space allocation I/Os may cause XFS to
shutdown
+ # after loading error table.
+ $FSSTRESS_PROG -z -n 5000 -p 10 \
+ -f creat=10 \
+ -f resvsp=1 \
+ -f truncate=1 \
+ -f punch=1 \
+ -f chown=5 \
+ -f mkdir=5 \
+ -f rmdir=1 \
+ -f mknod=1 \
+ -f unlink=1 \
+ -f symlink=1 \
+ -f rename=1 \
+ -d $SCRATCH_MNT/fsstress >> $seqres.full 2>&1
+
+ # Loading error table without "--nolockfs" option. Because "--nolockfs"
+ # won't freeze fs, then some running I/Os may cause XFS to shutdown
+ # prematurely. That's not what we want to test.
+ _dmerror_load_error_table lockfs
+ _dmerror_unmount
+
+ # Mount again to replay log after loading working table, so we have a
+ # consistent XFS after test.
+ _dmerror_load_working_table
+ _dmerror_mount
+ _dmerror_unmount
+}
+
+#### Test EIO/max_retries ####
+# Set EIO/max_retries a limited number(>-1), then even if fail_at_unmount=0,
+# the test won't hang.
+echo "=== Test EIO/max_retries ==="
+do_test error/metadata/EIO/max_retries
+
+#### Test EIO/retry_timeout_seconds ####
+# Set EIO/retry_timeout_seconds to a limited number(>0), then even if
+# fail_at_unmount=0, the test won't hang.
+echo "=== Test EIO/retry_timeout_seconds ==="
+do_test error/metadata/EIO/retry_timeout_seconds
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/263.out b/tests/xfs/263.out
new file mode 100644
index 0000000..714350f
--- /dev/null
+++ b/tests/xfs/263.out
@@ -0,0 +1,21 @@
+QA output created by 263
+=== Test EIO/max_retries ===
+error/fail_at_unmount=1
+error/metadata/default/max_retries=-1
+error/metadata/default/retry_timeout_seconds=0
+error/metadata/EIO/max_retries=-1
+error/metadata/EIO/retry_timeout_seconds=0
+error/metadata/ENOSPC/max_retries=-1
+error/metadata/ENOSPC/retry_timeout_seconds=0
+error/fail_at_unmount=0
+error/metadata/EIO/max_retries=1
+=== Test EIO/retry_timeout_seconds ===
+error/fail_at_unmount=1
+error/metadata/default/max_retries=-1
+error/metadata/default/retry_timeout_seconds=0
+error/metadata/EIO/max_retries=-1
+error/metadata/EIO/retry_timeout_seconds=0
+error/metadata/ENOSPC/max_retries=-1
+error/metadata/ENOSPC/retry_timeout_seconds=0
+error/fail_at_unmount=0
+error/metadata/EIO/retry_timeout_seconds=1
diff --git a/tests/xfs/group b/tests/xfs/group
index 6905a62..ec3c022 100644
--- a/tests/xfs/group
+++ b/tests/xfs/group
@@ -260,6 +260,7 @@
260 auto quick quota
261 auto quick quota
262 auto quick quota
+263 auto quick mount
265 auto clone
266 dump ioctl auto quick
267 dump ioctl tape
--
2.7.4
|