Because blkid is here for a long time, I hereby propose a patch for removing
support
for NOT having blkid. The current support through set of #ifdef is prone to
errors like
making a patch just in one of the branches, and according to a recent talk
between
Christoph and Eric, it is not necessary to keep it supported.
Remove code for checking ENABLE_BLKID, and the code when ENABLE_BLKID is not
defined.
It makes blkid required for compilation.
Signed-off-by: Jan Tulak <jtulak@xxxxxxxxxx>
---
Makefile | 5 ----
configure.ac | 6 +----
doc/INSTALL | 44 ------------------------------------
include/builddefs.in | 1 -
libdisk/Makefile | 4 ----
m4/package_blkid.m4 | 7 +++---
mkfs/Makefile | 21 ++++-------------
mkfs/xfs_mkfs.c | 64 ----------------------------------------------------
8 files changed, 10 insertions(+), 142 deletions(-)
diff --git a/Makefile b/Makefile
index d04f853..973bd42 100644
--- a/Makefile
+++ b/Makefile
@@ -66,11 +66,6 @@ io: libxcmd libhandle
quota: libxcmd
repair: libxlog
-
-ifneq ($(ENABLE_BLKID), yes)
-mkfs: libdisk
-endif
-
ifeq ($(HAVE_BUILDDEFS), yes)
include $(BUILDRULES)
else
diff --git a/configure.ac b/configure.ac
index ae17c68..108556b 100644
--- a/configure.ac
+++ b/configure.ac
@@ -37,10 +37,6 @@ AC_ARG_ENABLE(termcap,
test $enable_termcap = yes && libtermcap="-ltermcap",)
AC_SUBST(libtermcap)
-# AC_HAVE_BLKID_TOPO below wil find the library & check for topo support
-AC_ARG_ENABLE(blkid,
-[ --enable-blkid=[yes/no] Enable block device id library [default=yes]],,
- enable_blkid=yes)
AC_ARG_ENABLE(lib64,
[ --enable-lib64=[yes/no] Enable lib64 support [default=yes]],,
@@ -111,7 +107,7 @@ AC_HAVE_FALLOCATE
AC_HAVE_FIEMAP
AC_HAVE_PREADV
AC_HAVE_SYNC_FILE_RANGE
-AC_HAVE_BLKID_TOPO($enable_blkid)
+AC_HAVE_BLKID_TOPO(yes)
AC_HAVE_READDIR
AC_CHECK_SIZEOF([long])
diff --git a/doc/INSTALL b/doc/INSTALL
index ba3472b..ae8b64e 100644
--- a/doc/INSTALL
+++ b/doc/INSTALL
@@ -48,50 +48,6 @@ Linux Instructions
before running make or Makepkgs.
-Mac OS X Instructions
-=====================
-
-0. Note: since there is no XFS implementation on Mac OS X, you are
- severely limited in what you can do. mkfs.xfs(8), xfs_db(8) and
- xfs_repair(8) are the only functional tools on this platform, as
- they do not interact with the XFS kernel code at all. Still, it
- can be useful to have access to these utilities from Mac OS X in
- a dual boot configuration, for example.
-
-1. Configure, build and install the package
-
- The xfsprogs package uses autoconf/configure and expects a GNU build
- environment (your platform must at least have both autoconf, make,
- and glibtool).
-
- You will also need to have built and installed the UUID library which
- is provided by the e2fsprogs source package.
-
- Building libuuid:
-
- [download; unzip/untar e2fsprogs; cd e2fsprogs]
- $ ./configure --prefix=/usr --mandir=/usr/share/man
- $ make lib/ext2fs/ext2_types.h
- $ cd lib/uuid
- $ make
- $ su root
- # make install
- [verify that you now have a /usr/lib/libuuid.a]
-
- Building xfsprogs:
-
- [firstly set these environment variables to these values]
- TAR=/usr/bin/gnutar
- LIBTOOL=/usr/bin/glibtool
- INSTALL_GROUP=wheel
- LOCAL_CONFIGURE_OPTIONS="--enable-gettext=no"
-
- $ make
- $ su root
- # make install
- [and optionally, for the development libraries and headers]
- # make install-dev
-
IRIX Instructions
=================
diff --git a/include/builddefs.in b/include/builddefs.in
index 7e9f53d..e3a546f 100644
--- a/include/builddefs.in
+++ b/include/builddefs.in
@@ -89,7 +89,6 @@ ENABLE_SHARED = @enable_shared@
ENABLE_GETTEXT = @enable_gettext@
ENABLE_EDITLINE = @enable_editline@
ENABLE_READLINE = @enable_readline@
-ENABLE_BLKID = @enable_blkid@
HAVE_ZIPPED_MANPAGES = @have_zipped_manpages@
diff --git a/libdisk/Makefile b/libdisk/Makefile
index b058a9f..bbb3c8c 100644
--- a/libdisk/Makefile
+++ b/libdisk/Makefile
@@ -20,11 +20,7 @@ else
LSRCFILES = $(LINUX_DRIVERS)
endif
-ifneq ($(ENABLE_BLKID), yes)
-default: ltdepend $(LTLIBRARY)
-else
default:
-endif
include $(BUILDRULES)
diff --git a/m4/package_blkid.m4 b/m4/package_blkid.m4
index 44ca2cc..363142c 100644
--- a/m4/package_blkid.m4
+++ b/m4/package_blkid.m4
@@ -11,9 +11,10 @@ AC_DEFUN([AC_HAVE_BLKID_TOPO],
if test $ac_cv_func_blkid_probe_get_topology = yes; then
libblkid="-lblkid"
else
- libblkd=""
- enable_blkid="no"
- AC_SUBST(enable_blkid)
+ echo
+ echo 'FATAL ERROR: could not find a valid BLKID header.'
+ echo 'Install the Block device ID development package.'
+ exit 1
fi
fi
AC_SUBST(libblkid)
diff --git a/mkfs/Makefile b/mkfs/Makefile
index fd1f615..6de2da4 100644
--- a/mkfs/Makefile
+++ b/mkfs/Makefile
@@ -11,15 +11,7 @@ FSTYP = fstyp
HFILES = xfs_mkfs.h
CFILES = maxtrres.c proto.c xfs_mkfs.c
-ifeq ($(ENABLE_BLKID),yes)
-LLDLIBS += $(LIBBLKID)
-CFLAGS += -DENABLE_BLKID
-else
-LLDLIBS += $(LIBDISK)
-LTDEPENDENCIES += $(LIBDISK)
-endif
-
-LLDLIBS += $(LIBXFS) $(LIBUUID) $(LIBRT) $(LIBPTHREAD)
+LLDLIBS += $(LIBBLKID) $(LIBXFS) $(LIBUUID) $(LIBRT) $(LIBPTHREAD)
LTDEPENDENCIES += $(LIBXFS)
LLDFLAGS = -static-libtool-libs
@@ -28,15 +20,12 @@ LDIRT = $(FSTYP)
default: depend $(LTCOMMAND)
-ifneq ($(ENABLE_BLKID),yes)
-default: $(FSTYP)
-endif
-
include $(BUILDRULES)
-$(FSTYP):
- @echo " [CC] $@"
- $(Q)$(LTLINK) $@.c -o $@ $(CFLAGS) $(LDFLAGS) $(LIBDISK) $(PLDLIBS)
+# remove too with !enable_blkid?
+#$(FSTYP):
+# @echo " [CC] $@"
+# $(Q)$(LTLINK) $@.c -o $@ $(CFLAGS) $(LDFLAGS) $(LIBDISK) $(PLDLIBS)
install: default
$(INSTALL) -m 755 -d $(PKG_ROOT_SBIN_DIR)
diff --git a/mkfs/xfs_mkfs.c b/mkfs/xfs_mkfs.c
index 83f7749..ddbb509 100644
--- a/mkfs/xfs_mkfs.c
+++ b/mkfs/xfs_mkfs.c
@@ -18,12 +18,7 @@
#include <xfs/libxfs.h>
#include <ctype.h>
-#ifdef ENABLE_BLKID
#include <blkid/blkid.h>
-#else
-#include <disk/fstyp.h>
-#include <disk/volume.h>
-#endif
#include "xfs_mkfs.h"
/*
@@ -297,7 +292,6 @@ calc_stripe_factors(
}
}
-#ifdef ENABLE_BLKID
/*
* Check for existing filesystem or partition table on device.
* Returns:
@@ -498,64 +492,6 @@ static void get_topology(
&lsectorsize, &psectorsize, force_overwrite);
}
}
-#else /* ENABLE_BLKID */
-static int
-check_overwrite(
- char *device)
-{
- char *type;
-
- if (device && *device) {
- if ((type = fstype(device)) != NULL) {
- fprintf(stderr,
- _("%s: %s appears to contain an existing "
- "filesystem (%s).\n"), progname, device, type);
- return 1;
- }
- if ((type = pttype(device)) != NULL) {
- fprintf(stderr,
- _("%s: %s appears to contain a partition "
- "table (%s).\n"), progname, device, type);
- return 1;
- }
- }
- return 0;
-}
-
-static void get_topology(
- libxfs_init_t *xi,
- struct fs_topology *ft,
- int force_overwrite)
-{
-
- char *dfile = xi->volname ? xi->volname : xi->dname;
- int bsz = BBSIZE;
-
- if (!xi->disfile) {
- int fd;
- long long dummy;
-
- get_subvol_stripe_wrapper(dfile, SVTYPE_DATA,
- &ft->dsunit, &ft->dswidth, &ft->sectoralign);
- fd = open(dfile, O_RDONLY);
- /* If this fails we just fall back to BBSIZE */
- if (fd >= 0) {
- platform_findsizes(dfile, fd, &dummy, &bsz);
- close(fd);
- }
- }
-
- ft->lsectorsize = bsz;
- ft->psectorsize = bsz;
-
- if (xi->rtname && !xi->risfile) {
- int dummy1;
-
- get_subvol_stripe_wrapper(dfile, SVTYPE_RT, &dummy1,
- &ft->rtswidth, &dummy1);
- }
-}
-#endif /* ENABLE_BLKID */
static void
fixup_log_stripe_unit(
--
2.4.3
|