[e100 2.6 2/2] big-endian fix for ethtool -e/E

[Scott Feldman <scott.feldman@xxxxxxxxx>]

* Reads/write from/to eeprom using ethtool weren't working right
  on big-endian.  Now they are.

--------------

--- linux-2.5/drivers/net/e100.c        2004-05-03 14:46:27.872163392 -0700
+++ linux-2.5/drivers/net/e100.c.mod    2004-05-03 14:47:50.209646192 -0700
@@ -641,7 +641,8 @@ static void e100_eeprom_write(struct nic

        /* Three cmds: write/erase enable, write data, write/erase disable */
        cmd_addr_data[0] = op_ewen << (addr_len - 2);
-       cmd_addr_data[1] = (((op_write << addr_len) | addr) << 16) | data;
+       cmd_addr_data[1] = (((op_write << addr_len) | addr) << 16) |
+               cpu_to_le16(data);
        cmd_addr_data[2] = op_ewds << (addr_len - 2);

        /* Bit-bang cmds to write word to eeprom */
@@ -668,7 +669,6 @@ static void e100_eeprom_write(struct nic
                writeb(0, &nic->csr->eeprom_ctrl_lo);
                e100_write_flush(nic); udelay(4);
        }
-
 };

 /* General technique stolen from the eepro100 driver - very clever */
@@ -709,7 +709,7 @@ static u16 e100_eeprom_read(struct nic *
        writeb(0, &nic->csr->eeprom_ctrl_lo);
        e100_write_flush(nic); udelay(4);

-       return data;
+       return le16_to_cpu(data);
 };

 /* Load entire EEPROM image into driver cache and validate checksum */
@@ -724,12 +724,12 @@ static int e100_eeprom_load(struct nic *
        for(addr = 0; addr < nic->eeprom_wc; addr++) {
                nic->eeprom[addr] = e100_eeprom_read(nic, &addr_len, addr);
                if(addr < nic->eeprom_wc - 1)
-                       checksum += nic->eeprom[addr];
+                       checksum += cpu_to_le16(nic->eeprom[addr]);
        }

        /* The checksum, stored in the last word, is calculated such that
         * the sum of words should be 0xBABA */
-       checksum = 0xBABA - checksum;
+       checksum = le16_to_cpu(0xBABA - checksum);
        if(checksum != nic->eeprom[nic->eeprom_wc - 1]) {
                DPRINTK(PROBE, ERR, "EEPROM corrupted\n");
                return -EAGAIN;
@@ -756,9 +756,10 @@ static int e100_eeprom_save(struct nic *
        /* The checksum, stored in the last word, is calculated such that
         * the sum of words should be 0xBABA */
        for(addr = 0; addr < nic->eeprom_wc - 1; addr++)
-               checksum += nic->eeprom[addr];
-       nic->eeprom[nic->eeprom_wc - 1] = 0xBABA - checksum;
-       e100_eeprom_write(nic, addr_len, nic->eeprom_wc - 1, 0xBABA - checksum);
+               checksum += cpu_to_le16(nic->eeprom[addr]);
+       nic->eeprom[nic->eeprom_wc - 1] = le16_to_cpu(0xBABA - checksum);
+       e100_eeprom_write(nic, addr_len, nic->eeprom_wc - 1,
+               nic->eeprom[nic->eeprom_wc - 1]);

        return 0;
 }
@@ -1901,6 +1902,7 @@ static int e100_set_eeprom(struct net_de

        if(eeprom->magic != E100_EEPROM_MAGIC)
                return -EINVAL;
+
        memcpy(&((u8 *)nic->eeprom)[eeprom->offset], bytes, eeprom->len);

        return e100_eeprom_save(nic, eeprom->offset >> 1,
@@ -2209,9 +2211,8 @@ static int __devinit e100_probe(struct p

        if((err = e100_eeprom_load(nic)))
                goto err_out_free;
-       ((u16 *)netdev->dev_addr)[0] = le16_to_cpu(nic->eeprom[0]);
-       ((u16 *)netdev->dev_addr)[1] = le16_to_cpu(nic->eeprom[1]);
-       ((u16 *)netdev->dev_addr)[2] = le16_to_cpu(nic->eeprom[2]);
+
+       memcpy(netdev->dev_addr, nic->eeprom, ETH_ALEN);
        if(!is_valid_ether_addr(netdev->dev_addr)) {
                DPRINTK(PROBE, ERR, "Invalid MAC address from "
                        "EEPROM, aborting.\n");