2.6.9 - SiS900 - No MII transceivers found!

To:	webvenza@xxxxxxxxx, netdev@xxxxxxxxxxx
Subject:	2.6.9 - SiS900 - No MII transceivers found!
From:	Iouri Atiounkine - Pixart <iouri@xxxxxxxxxxxxxxxxxxxxxx>
Date:	Thu, 25 Nov 2004 17:18:33 -0300
Sender:	netdev-bounce@xxxxxxxxxxx
User-agent:	Mozilla/5.0 (X11; U; Linux i686; es-ES; rv:1.7) Gecko/20040707 Debian/1.7-5

Hi
 I have two motherboards PC Chips 909G version 1.0.
In this motherboards network interface is SiS900 onboard.

The network interface does not work always.
Sometimes in both motherboard the network interface is working.

It work good then computer was turned off for one day or more and until the power is turned off. After shutdown (or reboot) it not working at all.

The problem is at loading module:

eth0: No MII transceivers found!

In the case if module loaded good it print a message:
 found internal sis900 transceiver.

The kernel is downloaded from this address:
http://http.us.debian.org/debian/pool/main/k/kernel-image-2.6.9-i386/kernel-image-2.6.9-1-686_2.6.9-2_i386.deb

This motherboard has onboard separated SiS900 chip and LAN Transformer -
TD1603C.

Thank you.

*********************************** Here is message of dmesg, lsmod, lspci -n -vv and mii-tool: *********************************** R_xart:~# lsmod Module Size Used by sis900 20484 0 mii 4928 0 mousedev 11576 1 tsdev 7648 0 psmouse 21960 0 uhci_hcd 32944 0 ohci_hcd 21412 0 ehci_hcd 32068 0 usbcore 119396 5 uhci_hcd,ohci_hcd,ehci_hcd parport_pc 37188 1 lp 11080 0 parport 41704 2 parport_pc,lp i8xx_tco 6996 0 hw_random 5364 0 pciehp 98916 0 shpchp 101924 0 pci_hotplug 34448 2 pciehp,shpchp intel_agp 22592 1 agpgart 34600 2 intel_agp evdev 9504 0 crc32 4192 1 sis900 snd_intel8x0 35276 1 snd_ac97_codec 73200 1 snd_intel8x0 snd_pcm_oss 54024 0 snd_mixer_oss 20192 1 snd_pcm_oss snd_pcm 98696 2 snd_intel8x0,snd_pcm_oss snd_timer 25668 1 snd_pcm snd_page_alloc 9992 2 snd_intel8x0,snd_pcm gameport 4512 1 snd_intel8x0 snd_mpu401_uart 7872 1 snd_intel8x0 snd_rawmidi 24900 1 snd_mpu401_uart snd_seq_device 7976 1 snd_rawmidi snd 56804 11 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device soundcore 10176 1 snd nls_iso8859_1 3904 1 nls_cp437 5568 1 capability 4392 0 commoncap 7008 1 capability ide_cd 42592 1 cdrom 40956 1 ide_cd rtc 12664 0 vfat 14528 1 fat 46624 1 vfat xfs 616216 0 reiserfs 248976 1 romfs 9220 0 isofs 37208 0 ext2 70632 1 ext3 126184 0 jbd 64056 1 ext3 mbcache 9220 2 ext2,ext3 ide_generic 1280 0 ide_disk 20480 5 piix 13216 1 ide_core 143088 4 ide_cd,ide_generic,ide_disk,piix sd_mod 17904 0 ata_piix 9028 0 libata 45540 1 ata_piix scsi_mod 125676 2 sd_mod,libata unix 28564 172 fbcon 40416 0 font 8128 1 fbcon vesafb 6656 0 cfbcopyarea 3936 1 vesafb cfbimgblt 2880 1 vesafb cfbfillrect 3584 1 vesafb

R_xart:~# dmesg 0000000000100000 - 000000000f7f0000 (usable) BIOS-e820: 000000000f7f0000 - 000000000f7f8000 (ACPI data) BIOS-e820: 000000000f7f8000 - 000000000f800000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 247MB LOWMEM available. found SMP MP-table at 000fb960 On node 0 totalpages: 63472 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 59376 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 AMI ) @ 0x000fa000 ACPI: RSDT (v001 AMIINT INTEL845 0x00000010 MSFT 0x00000097) @ 0x0f7f0000 ACPI: FADT (v001 AMIINT INTEL845 0x00000011 MSFT 0x00000097) @ 0x0f7f0030 ACPI: MADT (v001 AMIINT INTEL845 0x00000009 MSFT 0x00000097) @ 0x0f7f00c0 ACPI: DSDT (v001 INTEL BROKDLEG 0x00001000 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Built 1 zonelists Kernel command line: root=/dev/hda5 ro Initializing CPU#0 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 1799.442 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 243616k/253888k available (1654k kernel code, 9600k reserved, 723k data, 152k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 3563.52 BogoMIPS (lpj=1781760) Security Scaffold v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 128K CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled CPU: Intel(R) Celeron(R) CPU 1.80GHz stepping 09 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking if image is initramfs...it isn't (ungzip failed); looks like an initrd Freeing initrd memory: 4632k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=3 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00f7330 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x600b, dseg 0xf0000 PnPBIOS: Missing SMALL_TAG_ENDDEP tag PnPBIOS: Missing SMALL_TAG_ENDDEP tag PnPBIOS: Missing SMALL_TAG_ENDDEP tag PnPBIOS: Missing SMALL_TAG_ENDDEP tag PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver PCI: Using ACPI for IRQ routing ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177 ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193 ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185 ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 201 ACPI: PCI interrupt 0000:03:03.0[A] -> GSI 23 (level, low) -> IRQ 193 ACPI: PCI interrupt 0000:03:07.0[A] -> GSI 18 (level, low) -> IRQ 185 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch (rgooch@xxxxxxxxxxxxx) devfs: boot_options: 0x0 Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI interrupt 0000:03:03.0[A] -> GSI 23 (level, low) -> IRQ 193 ttyS15 at I/O 0xcc08 (irq = 193) is a 16450 ttyS44 at I/O 0xcc10 (irq = 193) is a 8250 ttyS45 at I/O 0xcc18 (irq = 193) is a 16450 ttyS46 at I/O 0xcc20 (irq = 193) is a 8250 ttyS47 at I/O 0xcc28 (irq = 193) is a 8250 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI: (supports S0 S1 S4 S5) ACPI wakeup devices: USB1 USB2 USB3 EHCI ICHB PS2M PS2K UAR1 MC9 RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 4632KiB [1 disk] into ram disk... done. VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 152k freed vesafb: probe of vesafb0 failed with error -6 NET: Registered protocol family 1 SCSI subsystem initialized libata version 1.02 loaded. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185 ICH4: chipset revision 2 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: HDS728040PLAT20, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 1024KiB hda: 80418240 sectors (41174 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(33) hda: cache flushes supported /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 > p4 Probing IDE interface ide1... hdc: SAMSUNG CD-R/RW SW-252S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem VFS: Can't find ext3 filesystem on dev hda5. VFS: Can't find ext2 filesystem on dev hda5. Unable to identify CD-ROM format. VFS: Can't find a romfs filesystem on dev hda5. ReiserFS: hda5: found reiserfs format "3.6" with standard journal ReiserFS: hda5: using ordered data mode ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda5: checking transaction log (hda5) ReiserFS: hda5: Using r5 hash to sort names Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 Real Time Clock Driver v1.12 hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Capability LSM initialized cdrom: open failed. cdrom: open failed. cdrom: open failed. cdrom: open failed. FAT: bogus number of reserved sectors VFS: Can't find a valid FAT filesystem on dev hda6. ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 49535 usecs intel8x0: clocking to 48000 usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193 ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 193, pci mem d017ec00 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected sis900.c: v1.08.07 11/02/2003 ACPI: PCI interrupt 0000:03:07.0[A] -> GSI 18 (level, low) -> IRQ 185 eth0: No MII transceivers found! atmsvc: no signaling demon Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 845G Chipset. agpgart: Maximum main memory to use for agp memory: 196M agpgart: Detected 8060K stolen memory. agpgart: AGP aperture is 128M @ 0xd0000000 USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 169, io base 0000e400 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177 uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 177, io base 0000e800 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 185, io base 0000ec00 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected cpci_hotplug: CompactPCI Hot Plug Core version: 0.2 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 hw_random hardware driver 1.0.0 loaded i8xx TCO timer: initialized (0x0860). heartbeat=30 sec (nowayout=0) parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] lp0: using parport0 (interrupt-driven). ehci_hcd 0000:00:1d.7: remove, state 1 usb usb1: USB disconnect, address 1 ehci_hcd 0000:00:1d.7: USB bus 1 deregistered uhci_hcd 0000:00:1d.0: remove, state 1 usb usb2: USB disconnect, address 1 uhci_hcd 0000:00:1d.0: USB bus 2 deregistered uhci_hcd 0000:00:1d.1: remove, state 1 usb usb3: USB disconnect, address 1 uhci_hcd 0000:00:1d.1: USB bus 3 deregistered uhci_hcd 0000:00:1d.2: remove, state 1 usb usb4: USB disconnect, address 1 uhci_hcd 0000:00:1d.2: USB bus 4 deregistered usbcore: deregistering driver usbfs usbcore: deregistering driver hub usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193 ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 193, pci mem d026ac00 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 169, io base 0000e400 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177 uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 177, io base 0000e800 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 185, io base 0000ec00 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 ts: Compaq touchscreen protocol output mice: PS/2 mouse device common for all mice sis900.c: v1.08.07 11/02/2003 ACPI: PCI interrupt 0000:03:07.0[A] -> GSI 18 (level, low) -> IRQ 185 eth0: No MII transceivers found! R_xart:~# ifconfig eth0 up eth0: ERROR while getting interface flags: No existe tal dispositivo R_xart:~# mii-tool -vv Using SIOCGMIIPHY=0x8947 no MII interfaces found

R_xart:~# lspci 0000:00:00.0 Host bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 03) 0000:00:02.0 VGA compatible controller: Intel Corp. 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03) 0000:00:1d.0 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #1 (rev 02) 0000:00:1d.1 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #2 (rev 02) 0000:00:1d.2 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #3 (rev 02) 0000:00:1d.7 USB Controller: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller (rev 02) 0000:00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev 82) 0000:00:1f.0 ISA bridge: Intel Corp. 82801DB (ICH4) LPC Bridge (rev 02) 0000:00:1f.1 IDE interface: Intel Corp. 82801DB (ICH4) Ultra ATA 100 Storage Controller (rev 02) 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB (ICH4) AC'97 Audio Controller (rev 02) 0000:03:03.0 Modem: PCTel Inc: Unknown device 2189 (rev 04) 0000:03:07.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 02)

R_xart:~# lspci -n -vv 0000:00:00.0 Class 0600: 8086:2560 (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at e0000000 (32-bit, prefetchable) Capabilities: [e4] #09 [1105]

0000:00:02.0 Class 0300: 8086:2562 (rev 03) Subsystem: 8086:2562 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 169 Region 0: Memory at d0000000 (32-bit, prefetchable) Region 1: Memory at dff80000 (32-bit, non-prefetchable) [size=512K] Capabilities: [d0] Power Management version 1 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:1d.0 Class 0c03: 8086:24c2 (rev 02) Subsystem: 8086:24c0 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 169 Region 4: I/O ports at e400 [size=32]

0000:00:1d.1 Class 0c03: 8086:24c4 (rev 02) Subsystem: 8086:24c0 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 177 Region 4: I/O ports at e800 [size=32]

0000:00:1d.2 Class 0c03: 8086:24c7 (rev 02) Subsystem: 8086:24c0 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 185 Region 4: I/O ports at ec00 [size=32]

0000:00:1d.7 Class 0c03: 8086:24cd (rev 02) (prog-if 20) Subsystem: 8086:24c0 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 193 Region 0: Memory at dff7bc00 (32-bit, non-prefetchable) Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] #0a [2080]

0000:00:1e.0 Class 0604: 8086:244e (rev 82) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: dfd00000-dfdfffff BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

0000:00:1f.0 Class 0601: 8086:24c0 (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0

0000:00:1f.1 Class 0101: 8086:24cb (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: 8086:24c0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 185 Region 0: I/O ports at <unassigned> Region 1: I/O ports at <unassigned> Region 2: I/O ports at <unassigned> Region 3: I/O ports at <unassigned> Region 4: I/O ports at fc00 [size=16] Region 5: Memory at 10000000 (32-bit, non-prefetchable) [size=1K]

0000:00:1f.5 Class 0401: 8086:24c5 (rev 02) Subsystem: 1019:a00a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 201 Region 0: I/O ports at e000 Region 1: I/O ports at dc00 [size=64] Region 2: Memory at dff7ba00 (32-bit, non-prefetchable) [size=512] Region 3: Memory at dff7b900 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:03:03.0 Class 0703: 134d:2189 (rev 04) Subsystem: 134d:1002 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (250ns min, 15500ns max), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 193 Region 0: Memory at dfdff000 (32-bit, non-prefetchable) Region 1: I/O ports at cc00 [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:03:07.0 Class 0200: 1039:0900 (rev 02) Subsystem: 1039:0900 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (13000ns min, 2750ns max) Interrupt: pin A routed to IRQ 185 Region 0: I/O ports at c800 [size=dfdc0000] Region 1: Memory at dfdfe000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at 00020000 [disabled] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

R_xart:~#
R_xart:~# uname -a
Linux R_xart 2.6.9-1-686 #1 Tue Nov 16 17:52:21 JST 2004 i686 GNU/Linux


--
----------------------------------------------------------
Iouri Atiounkine
VoIP: Skype callto://atiounkine; H323 (pronto)

<Prev in Thread]	Current Thread	[Next in Thread>
2.6.9 - SiS900 - No MII transceivers found!, Iouri Atiounkine - Pixart <= Re: 2.6.9 - SiS900 - No MII transceivers found!, Iouri Atiounkine - Pixart

Previous by Date:	Re: r8169.c, Dorn Hetzel
Next by Date:	Re: r8169.c, Dorn Hetzel
Previous by Thread:	[2.6 patch] SCTP: possible cleanups, Adrian Bunk
Next by Thread:	Re: 2.6.9 - SiS900 - No MII transceivers found!, Iouri Atiounkine - Pixart
Indexes:	[Date] [Thread] [Top] [All Lists]