Re: [PATCH 2.6] e100: use NAPI mode all the time

[Christopher Chan <cchan@xxxxxxxxxxxx>]

Christopher Chan wrote:
> Scott Feldman wrote:
>
> > I see no reason to keep the non-NAPI option for e100.  This patch removes
> > the CONFIG_E100_NAPI option and puts the driver in NAPI mode all the 
> > time.
> > Matches the way tg3 works.
> >
> > Unless someone has a really good reason to keep the non-NAPI mode, this
> > should go in for 2.6.7.
>
>
> I for one need to test 2.6.6 e100 with NAPI on. Under 2.6.3/4 I had 
> problems with NAPI mode turned on. Turning NAPI off and then also doing
>
> net.ipv4.tcp_max_syn_backlog = 2048
> net.ipv4.route.gc_thresh = 65536
> net.ipv4.route.max_size = 1048576
>
> was the only way to keep the machines I run available via the network.
>
> I would get dst cache overflows and sometimes the kernel will log 
> garbled messages and when that happens the box requires a reboot.

KERNEL: assertion (tp->copied_seq == tp->rcv_nxt || (flags & (MSG_PEEK | 
MSG_TRUNC))) failed at net/ipv4/tcp.c (1632)
KERNEL: assertion (flags & MSG_PEEK) failed at net/ipv4/tcp.c (1568)
KERNEL: assertion (tp->copied_seq == tp->rcv_nxt || (flags & (MSG_PEEK | 
MSG_TRUNC))) failed at net/ipv4/tcp.c (1632)
KERNEL: assertion (flags & MSG_PEEK) failed at net/ipv4/tcp.c (1568)
printk: 4253 messages suppressed.
dst cache overflow
KERNEL: assertion (tp->copied_seq == tp->rcv_nxt || (flags & (MSG_PEEK | 
MSG_TRUNC))) failed at net/ipv4/tcp.c (1632)
KERNEL: assertion (flags & MSG_PEEK) failed at net/ipv4/tcp.c (1568)
KERNEL: assertion (tp->copied_seq == tp->rcv_nxt || (flags & (MSG_PEEK | 
MSG_TRUNC))) failed at net/ipv4/tcp.c (1632)
KERNEL: assertion (flags & MSG_PEEK) failed at net/ipv4/tcp.c (1568)
KERNEL: assertion (tp->copied_seq == tp->rcv_nxt || (flags & (MSG_PEEK | 
MSG_TRUNC))) failed at net/ipv4/tcp.c (1632)
KERNEL: assertion (flags & MSG_PEEK) failed at net/ipv4/tcp.c (1568)
KERNEL: assertion (tp->copied_seq == tp->rcv_nxt || (flags & (MSG_PEEK | 
MSG_TRUNC))) failed at net/ipv4/tcp.c (1632)

I get loads of this now for the only box that I have NAPI enabled on the 
e100 driver.

This is on a 2.6.6 kernel.