Rask Ingemann Lambertsen wrote:
On Mon, Nov 17, 2003 at 01:52:17PM -0800, Ben Greear wrote:
Is there any interest in adding an Ethtool command to tell the driver to
push the extra 4 bytes of CSUM into the skb?
When enabling this feature, I'd also like to allow drivers to receive
frames with bad FCS as well.
[cut]
At least some hardware appears
to support receiving bad FCS frames (e1000, evidently), but I am not sure
how wide-spread this feature is...
The Intel i82586 and i82596 and can be told to receive frames with a bad FCS.
They can also be told to send a precomputed FCS rather than computing it on
the fly. The i82596 and tulip can also transfer the FCS to memory when
receiving frames. I guess all of this is also supported on the i82557/8/9.
If you have a patch or example code that shows how to do this, I'd love to
see it. I have code that should RX bad CSUM from the Intel folks, but I can't
get it to generate bad CRC (it does framing errors instead with my attempt),
so I can't test the RX code properly!
I have the path from user-space to the NIC written, so just need to tweak the
drivers a bit...
Do you know if tulip can be told to accept bad FCS and/or if it can generate
a frame with bad FCS somehow?
Thanks!
Ben
--
Ben Greear <greearb@xxxxxxxxxxxxxxx>
Candela Technologies Inc http://www.candelatech.com
|