Previously jamal wrote:
> The emssage is useful but debug (mostly).
> Whats your ifconfig look like? Have some tunnels in there maybe?
three ethernet interfaces and a ipv6/ip tunnel. Here is the ifconfig
output:
eth0 Link encap:Ethernet HWaddr 00:50:04:0B:DD:79
inet addr:192.168.10.1 Bcast:192.168.10.255 Mask:255.255.255.0
inet6 addr: fe80::250:4ff:fe0b:dd79/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:673540 errors:0 dropped:0 overruns:0 frame:0
TX packets:668357 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:229549898 (218.9 MiB) TX bytes:465650601 (444.0 MiB)
Interrupt:11 Base address:0xec00
eth1 Link encap:Ethernet HWaddr 00:90:27:BE:60:55
inet addr:194.109.254.66 Bcast:255.255.255.255 Mask:255.255.255.0
inet6 addr: fe80::290:27ff:febe:6055/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1276385 errors:0 dropped:0 overruns:0 frame:0
TX packets:1172898 errors:0 dropped:0 overruns:0 carrier:0
collisions:1128 txqueuelen:1000
RX bytes:1332651102 (1.2 GiB) TX bytes:293617934 (280.0 MiB)
eth2 Link encap:Ethernet HWaddr 00:90:27:BE:4B:EC
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: 2001:888:101d::1/64 Scope:Global
inet6 addr: fe80::290:27ff:febe:4bec/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:713928 errors:0 dropped:0 overruns:0 frame:0
TX packets:752929 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:111560554 (106.3 MiB) TX bytes:860040830 (820.1 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:33261 errors:0 dropped:0 overruns:0 frame:0
TX packets:33261 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3401641 (3.2 MiB) TX bytes:3401641 (3.2 MiB)
xs4all Link encap:IPv6-in-IPv4
inet6 addr: 2001:888:10:1d::2/64 Scope:Global
inet6 addr: fe80::c26d:fe42/64 Scope:Link
inet6 addr: fe80::c0a8:a01/64 Scope:Link
inet6 addr: fe80::c0a8:102/64 Scope:Link
inet6 addr: fe80::c0a8:101/64 Scope:Link
UP POINTOPOINT RUNNING NOARP MTU:1480 Metric:1
RX packets:128 errors:0 dropped:0 overruns:0 frame:0
TX packets:116 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:95545 (93.3 KiB) TX bytes:19613 (19.1 KiB)
there is also a secondary address on eth2 which ifconfig does not show.
> Whats your netfilter setup?
One chain attached to the FORWARD chain and two to the OUTPUT chain,
all pretty simple.
Wichert.
--
Wichert Akkerman <wichert@xxxxxxxxx> It is simple to make things.
http://www.wiggy.net/ It is hard to make things simple.
|