On Thu, May 27, 2004 at 05:30:46PM +0800, navaneeth wrote:
> Hi All,
>
> I have seen a problem with WPA IE attachment being discussed some time
> back in the mailing list.
>
> I am facing the same issue.
>
> I have done the following:
>
> 1. Set DOT11_OID_MLMEAUTOLEVEL to DOT11_MLME_EXTENDED
>
> 2. Set DOT11_OID_PRIVACYINVOKED to 1.
>
> 3. Set DOT11_OID_AUTHENABLE to 3 (Both).
>
> 4. Set DOT11_OID_DEFKEYID to 0.
>
> 5. Set Key Type for DOT11_OID_DEFKEY1 to 4 as TKIP.
>
> 6. Generated the following IE
> dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
>
> 7. Set DOT11_OID_EXUNENCRYPTED to 1.
>
> 8. Set DOT11_OID_DOT1XENABLE to 1.
>
> 9. Set DOT11_OID_ATTACHMENT
> Type = 0x00 (All Management Frames) . I also tried 0x80 (Beacon Alone)
> ID = 0
> Data = IE shown above
> Length = 24 (Length of the above IE)
>
> But the attachment simply refuses to go in the Beacon. I captured the Beacons
> . But I failed to see the attachment.
WPA has not been completed. I've started working on it. I'll reply once
I get somewhere.
--
GnuPG Key fingerprint = 113F B290 C6D2 0251 4D84 A34A 6ADD 4937 E20A 525E
|