Hi,
Just tried out the e100 driver which comes with 2.5.73, i.e. not the new one
from sourceforge, with the following result. The machine is a dual Xeon box.
Regards,
-Udo.
Intel(R) PRO/100 Network Driver - version 2.3.13-k1
Copyright (c) 2003 Intel Corporation
e100: selftest OK.
irq 9: nobody cared!
Call Trace:
[<c010b314>] __report_bad_irq+0x2a/0x8b
[<c010b3fe>] note_interrupt+0x6f/0x9f
[<c010b715>] do_IRQ+0x161/0x192
[<c0109aa4>] common_interrupt+0x18/0x20
[<c0258eb3>] e100_mdi_read+0x50/0xdb
[<c0259759>] e100_auto_neg+0xeb/0x112
[<c0258e38>] e100_mdi_write+0xb0/0xdb
[<c02597b8>] e100_phy_set_speed_duplex+0x38/0xa7
[<c03e7dd3>] e100_phy_init+0x71/0x80
[<c0253f0f>] e100_hw_init+0x13/0x10b
[<c03e73c8>] e100_rd_pwa_no+0x31/0x3f
[<c03e7127>] e100_init+0xee/0x118
[<c03e6a47>] e100_found1+0x226/0x3f9
[<c02038c0>] pci_device_probe_static+0x52/0x63
[<c0203a46>] __pci_device_probe+0x3b/0x4d
[<c0203a87>] pci_device_probe+0x2f/0x4d
[<c024251c>] bus_match+0x45/0x73
[<c0242615>] driver_attach+0x59/0x5d
[<c0242896>] bus_add_driver+0x94/0xa7
[<c0203d59>] pci_register_driver+0x80/0xa8
[<c03e6c31>] e100_init_module+0x17/0x57
[<c03d085c>] do_initcalls+0x27/0x92
[<c012f268>] init_workqueues+0xf/0x26
[<c01050c9>] init+0x5b/0x1f6
[<c010506e>] init+0x0/0x1f6
[<c0107029>] kernel_thread_helper+0x5/0xb
handlers:
[<c0205f63>] (acpi_irq+0x0/0x16)
Disabling IRQ #9
e100: eth0: Intel(R) PRO/100 Network Connection
Hardware receive checksums enabled
pgpNHlIEAIXB3.pgp
Description: PGP signature
|