[PATCH 2.6.10-rc1 5/15] wireless/orinoco: Update orinoco pcmcia driver's IRQ handling

[Dan Williams <dcbw@xxxxxxxxxx>]

Update in-kernel orinoco wireless drivers to upstream CVS.
None of this is original code by Dan Williams, simply a
broken down patch set split-out from upstream orinoco CVS.

o Update orinoco pcmcia driver's IRQ handling

Signed-off-by: Dan Williams <dcbw@xxxxxxxxxx>

--- a/drivers/net/wireless/orinoco_cs.c.5-irq-handling  2004-10-26 
09:28:06.330250992 -0400
+++ b/drivers/net/wireless/orinoco_cs.c 2004-10-26 09:33:00.939463584 -0400
@@ -54,19 +54,11 @@
 
 /* Module parameters */
 
-/* The old way: bit map of interrupts to choose from */
-/* This means pick from 15, 14, 12, 11, 10, 9, 7, 5, 4, and 3 */
-static uint irq_mask = 0xdeb8;
-/* Newer, simpler way of listing specific interrupts */
-static int irq_list[4] = { -1 };
-
 /* Some D-Link cards have buggy CIS. They do work at 5v properly, but
  * don't have any CIS entry for it. This workaround it... */
 static int ignore_cis_vcc; /* = 0 */
-
-MODULE_PARM(irq_mask, "i");
-MODULE_PARM(irq_list, "1-4i");
-MODULE_PARM(ignore_cis_vcc, "i");
+module_param(ignore_cis_vcc, int, 0644);
+MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and 
socket");
 
 /********************************************************************/
 /* Magic constants                                                 */
@@ -162,7 +154,7 @@
        struct orinoco_pccard *card;
        dev_link_t *link;
        client_reg_t client_reg;
-       int ret, i;
+       int ret;
 
        dev = alloc_orinocodev(sizeof(*card), orinoco_cs_hard_reset);
        if (! dev)
@@ -175,14 +167,11 @@
        link->priv = dev;
 
        /* Interrupt setup */
-       link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+       link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
        link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
-       if (irq_list[0] == -1)
-               link->irq.IRQInfo2 = irq_mask;
-       else
-               for (i = 0; i < 4; i++)
-                       link->irq.IRQInfo2 |= 1 << irq_list[i];
-       link->irq.Handler = NULL;
+       link->irq.IRQInfo2 = 0xffffffff;        /* Any ISA IRQ */
+       link->irq.Handler = orinoco_interrupt;
+       link->irq.Instance = dev; 
 
        /* General socket configuration defaults can go here.  In this
         * client, we assume very little, and rely on the CIS for
@@ -263,6 +252,9 @@
                last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \
        } while (0)
 
+#define CFG_CHECK(fn, ret) \
+       if (ret != 0) goto next_entry
+
 static void
 orinoco_cs_config(dev_link_t *link)
 {
@@ -323,9 +315,8 @@
                cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
                cistpl_cftable_entry_t dflt = { .index = 0 };
 
-               if (pcmcia_get_tuple_data(handle, &tuple) != 0 ||
-                               pcmcia_parse_tuple(handle, &tuple, &parse) != 0)
-                       goto next_entry;
+               CFG_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
+               CFG_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, 
&parse));
 
                if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
                        dflt = *cfg;
@@ -363,8 +354,7 @@
                            dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
                
                /* Do we need to allocate an interrupt? */
-               if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
-                       link->conf.Attributes |= CONF_ENABLE_IRQ;
+               link->conf.Attributes |= CONF_ENABLE_IRQ;
 
                /* IO window settings */
                link->io.NumPorts1 = link->io.NumPorts2 = 0;
@@ -390,8 +380,8 @@
                        }
 
                        /* This reserves IO space but doesn't actually enable 
it */
-                       if (pcmcia_request_io(link->handle, &link->io) != 0)
-                               goto next_entry;
+                       CFG_CHECK(RequestIO,
+                                 pcmcia_request_io(link->handle, &link->io));
                }
 
 
@@ -416,22 +406,7 @@
         * a handler to the interrupt, unless the 'Handler' member of
         * the irq structure is initialized.
         */
-       if (link->conf.Attributes & CONF_ENABLE_IRQ) {
-               int i;
-
-               link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-               link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
-               if (irq_list[0] == -1)
-                       link->irq.IRQInfo2 = irq_mask;
-               else
-                       for (i=0; i<4; i++)
-                               link->irq.IRQInfo2 |= 1 << irq_list[i];
-               
-               link->irq.Handler = orinoco_interrupt; 
-               link->irq.Instance = dev; 
-               
-               CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, 
&link->irq));
-       }
+       CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq));
 
        /* We initialize the hermes structure before completing PCMCIA
         * configuration just in case the interrupt handler gets
@@ -453,8 +428,6 @@
        SET_MODULE_OWNER(dev);
        card->node.major = card->node.minor = 0;
 
-       /* register_netdev will give us an ethX name */
-       dev->name[0] = '\0';
        /* Tell the stack we exist */
        if (register_netdev(dev) != 0) {
                printk(KERN_ERR PFX "register_netdev() failed\n");
@@ -476,8 +449,7 @@
        if (link->conf.Vpp1)
                printk(", Vpp %d.%d", link->conf.Vpp1 / 10,
                       link->conf.Vpp1 % 10);
-       if (link->conf.Attributes & CONF_ENABLE_IRQ)
-               printk(", irq %d", link->irq.AssignedIRQ);
+       printk(", irq %d", link->irq.AssignedIRQ);
        if (link->io.NumPorts1)
                printk(", io 0x%04x-0x%04x", link->io.BasePort1,
                       link->io.BasePort1 + link->io.NumPorts1 - 1);