Ulf fixed a couple of system calls to get bash working, and now it
seems we can get up to single user mode!
Kanoj
>> bootp()annie.engr.sgi.com:/tftpboot/penguin3/vmlinux.64
Setting $netaddr to 163.154.10.23 (from server annie.engr.sgi.com)
Obtaining /tftpboot/penguin3/vmlinux.64 from server annie.engr.sgi.com
1250008+318400+717028 entry: 0xa800000000154000
ARCH: SGI-IP27
PROMLIB: ARC firmware Version 64 Revision 0
Total memory probed : 0x20000 pages
Linux version 2.3.99-pre1 (kanoj@xxxxxxxxxxxxxxxxxx) (gcc version egcs-2.91.66
19990314 (egcs-1.1.2 release)) #6 Mon Mar 20 14:47:16 PST 2000
Loading R10000 MMU routines.
CPU revision is: 00000927
Primary instruction cache 32kb, linesize 64 bytes
Primary data cache 32kb, linesize 32 bytes
Secondary cache sized at 1024K, linesize 128
IP27: Running on node 0.
Node 0 has a primary CPU, CPU is running.
Node 0 has a secondary CPU, CPU is running.
Machine is in M mode.
On node 0 totalpages: 32768
zone(0): 4096 pages.
zone(1): 28672 pages.
zone(2): 0 pages.
Entering 64-bit mode.
CPU clock is 180MHz.
Calibrating delay loop... 179.81 BogoMIPS
Memory: 124080k/131072k available (1220k kernel code, 6992k reserved, 110k
data, 184k init)
Buffer-cache hash table entries: 8192 (order: 4, 65536 bytes)
Page-cache hash table entries: 32768 (order: 6, 262144 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware on host bus 0, node 0.
PCI: Fixing base addresses for device 00:02.0
Linux NET4.0 for Linux 2.3
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 8Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
Starting kswapd v1.6
Serial driver version 4.92 (2000-1-27) with MANY_PORTS SHARE_IRQ SERIAL_PCI
enabled
ttyS00 at 0x0000 (irq = 0) is a 16550A
ttyS01 at 0x0000 (irq = 0) is a 16550A
qlogicisp : new isp1020 revision ID (5)
qlogicisp : new isp1020 revision ID (5)
scsi0 : QLogic ISP1020 SCSI on PCI bus 00 device 00 irq 0 I/O base 0x8200000
scsi1 : QLogic ISP1020 SCSI on PCI bus 00 device 08 irq 1 I/O base 0x8400000
scsi : 2 hosts.
Vendor: SGI Model: IBM DCHS04Y Rev: 3232
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 1, lun 0
Vendor: SGI Model: IBM DCHS04Y Rev: 3232
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 4, lun 0
scsi : detected 2 SCSI disks total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8888543 [4340 MB] [4.3 GB]
Partition check:
sda: sda1 sda2 sda3 sda4
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8888543 [4340 MB] [4.3 GB]
sdb: sdb1 sdb2 sdb3 sdb4
Ok, using PHY 31, vendor 0x20005c0, model 0, rev 1.
eth0: MII transceiver found at MDIO address 31, config 3100 status 786f.
IOC3 SSRAM has 64 kbyte.
Found DS1981U NIC, registration number 70:ad:01:00:70:5e, CRC eb.
Ethernet address is 08:00:69:05:31:cd.
Sending BOOTP requests....... OK
IP-Config: Got BOOTP answer from 163.154.10.27, my address is 163.154.10.23
Looking up port of RPC 100003/2 on 163.154.10.27
Looking up port of RPC 100005/1 on 163.154.10.27
VFS: Mounted root (NFS filesystem) readonly.
Freeing unused kernel memory: 184k freed
kmod: failed to exec /sbin/modprobe -s -k char-major-4, errno = 2
INIT: version 2.74 booting
Activating swap partitions
hostname: ulf2.engr.sgi.com
Checking root filesystems.
WARNING: Your /etc/fstab does not contain the fsck passno
field. I will kludge around things for you, but you
should fix your /etc/fstab file as soon as you can.
Parallelizing fsck version 1.10 (24-Apr-97)
[/sbin/fsck.ext2] fsck.ext2 -a /dev/sda1
Warning... fsck.ext2 for device /dev/sda1 exited with signal 11.
*** An error occurred during the file system check.
*** Dropping you to a shell; the system will reboot
*** when you leave the shell.
Give root password for maintenance
(or type Control-D for normal startup):
[root@ulf2 /root]# pwd
/root
[root@ulf2 /root]# ls -l
total 237
-rw------- 1 root root 241664 Oct 30 10:22 core
[root@ulf2 /root]# cd ..
[root@ulf2 /]# ls
a.out dev lib mnt sbin var
bin etc lost+found proc tmp vmlinux.64
boot home ls root usr
[root@ulf2 /]# pwd
/
[root@ulf2 /]# ls -l
total 4571
-rwxr-xr-x 1 root root 572249 Mar 17 18:13 a.out
drwxr-xr-x 2 37984 wheel 2048 Mar 16 22:18 bin
drwxr-xr-x 2 37984 wheel 1024 Feb 6 1996 boot
drwxr-xr-x 2 37984 wheel 21504 Feb 20 01:39 dev
drwxr-xr-x 17 37984 wheel 2048 Nov 2 00:47 etc
drwxr-xr-x 3 37984 wheel 1024 Oct 30 08:48 home
drwxr-xr-x 4 37984 wheel 2048 Oct 30 08:43 lib
drwxr-xr-x 2 37984 wheel 1024 Oct 30 07:44 lost+found
-rwxr-xr-x 1 root root 1338092 Mar 14 01:02 ls
drwxr-sr-x 2 37984 wheel 1024 Nov 2 00:23 mnt
drwxr-sr-x 2 37984 wheel 1024 Nov 2 00:21 proc
drwxr-xr-x 2 37984 wheel 1024 Oct 31 04:22 root
drwxr-xr-x 3 37984 wheel 1024 Oct 30 10:28 sbin
drwxr-xr-t 2 37984 wheel 1024 Nov 1 04:02 tmp
drwxr-xr-x 18 37984 wheel 1024 Oct 30 08:08 usr
drwxr-xr-x 12 37984 wheel 1024 Oct 30 10:21 var
-rwxrwxrwx 1 37984 wheel 2706622 Mar 20 22:51 vmlinux.64
[root@ulf2 /]# date
Mon Mar 20 22:59:10 /etc/localtime 2000
[root@ulf2 /]# whoami
root
[root@ulf2 /]# ping
usage: ping [-LRdfnqrv] [-c count] [-i wait] [-l preload]
[-p pattern] [-s packetsize] [-t ttl] [-I interface address] host
[root@ulf2 /]# ping 163.154.10.144
PING 163.154.10.144 (163.154.10.144): 56 data bytes
64 bytes from 163.154.10.144: icmp_seq=0 ttl=254 time=0.0 ms
64 bytes from 163.154.10.144: icmp_seq=1 ttl=254 time=0.0 ms
64 bytes from 163.154.10.144: icmp_seq=2 ttl=254 time=0.0 ms
64 bytes from 163.154.10.144: icmp_seq=3 ttl=254 time=0.0 ms
64 bytes from 163.154.10.144: icmp_seq=4 ttl=254 time=0.0 ms
64 bytes from 163.154.10.144: icmp_seq=5 ttl=254 time=0.0 ms
64 bytes from 163.154.10.144: icmp_seq=6 ttl=254 time=0.0 ms
64 bytes from 163.154.10.144: icmp_seq=7 ttl=254 time=0.0 ms
--- 163.154.10.144 ping statistics ---
8 packets transmitted, 8 packets received, 0% packet loss
round-trip min/avg/max = 0.0/0.0/0.0 ms
|