#: ../copy/xfs_copy.c:96 #, c-format msgid "Check logfile \"%s\" for more details\n" msgstr "" #: ../copy/xfs_copy.c:102 #, c-format msgid "%s: could not write to logfile \"%s\".\n" msgstr "" #: ../copy/xfs_copy.c:105 #, c-format msgid "Aborting XFS copy -- logfile error -- reason: %s\n" msgstr "" #: ../copy/xfs_copy.c:120 ../copy/xfs_copy.c:280 ../copy/xfs_copy.c:553 #: ../copy/xfs_copy.c:560 msgid "Aborting XFS copy - reason" msgstr "" #: ../copy/xfs_copy.c:134 msgid "THE FOLLOWING COPIES FAILED TO COMPLETE\n" msgstr "" #: ../copy/xfs_copy.c:138 msgid "write error" msgstr "" #: ../copy/xfs_copy.c:140 msgid "lseek64 error" msgstr "" #: ../copy/xfs_copy.c:141 #, c-format msgid " at offset %lld\n" msgstr "" #: ../copy/xfs_copy.c:145 #, c-format msgid "All copies completed.\n" msgstr "" #: ../copy/xfs_copy.c:148 #, c-format msgid "See \"%s\" for more details.\n" msgstr "" #: ../copy/xfs_copy.c:249 #, c-format msgid "%s: write error on target %d \"%s\" at offset %lld\n" msgstr "" #: ../copy/xfs_copy.c:254 #, c-format msgid "%s: lseek64 error on target %d \"%s\" at offset %lld\n" msgstr "" #: ../copy/xfs_copy.c:260 #, c-format msgid "Aborting target %d - reason" msgstr "" #: ../copy/xfs_copy.c:264 msgid "Aborting XFS copy - no more targets.\n" msgstr "" #: ../copy/xfs_copy.c:275 #, c-format msgid "%s: thread %d died unexpectedly, target \"%s\" incomplete\n" msgstr "" #: ../copy/xfs_copy.c:277 #, c-format msgid "%s: offset was probably %lld\n" msgstr "" #: ../copy/xfs_copy.c:288 #, c-format msgid "%s: Unknown child died (should never happen!)\n" msgstr "" #: ../copy/xfs_copy.c:298 #, c-format msgid "Usage: %s [-bd] [-L logfile] source target [target ...]\n" msgstr "" #: ../copy/xfs_copy.c:376 #, c-format msgid "%s: lseek64 failure at offset %lld\n" msgstr "" #: ../copy/xfs_copy.c:391 #, c-format msgid "assert error: buf->length = %d, buf->size = %d\n" msgstr "" #: ../copy/xfs_copy.c:398 #, c-format msgid "%s: read failure at offset %lld\n" msgstr "" #: ../copy/xfs_copy.c:533 ../growfs/xfs_growfs.c:179 ../io/init.c:177 #: ../mkfs/xfs_mkfs.c:1284 ../quota/init.c:131 ../repair/xfs_repair.c:235 #: ../rtcp/xfs_rtcp.c:57 #, c-format msgid "%s version %s\n" msgstr "" #: ../copy/xfs_copy.c:551 #, c-format msgid "%s: couldn't open log file \"%s\"\n" msgstr "" #: ../copy/xfs_copy.c:558 #, c-format msgid "%s: couldn't set up logfile stream\n" msgstr "" #: ../copy/xfs_copy.c:570 msgid "Couldn't allocate target array\n" msgstr "" #: ../copy/xfs_copy.c:585 #, c-format msgid "%s: couldn't register atexit function.\n" msgstr "" #: ../copy/xfs_copy.c:594 #, c-format msgid "%s: couldn't open source \"%s\"\n" msgstr "" #: ../copy/xfs_copy.c:600 #, c-format msgid "%s: couldn't stat source \"%s\"\n" msgstr "" #: ../copy/xfs_copy.c:610 #, c-format msgid "%s: Cannot set direct I/O flag on \"%s\".\n" msgstr "" #: ../copy/xfs_copy.c:615 #, c-format msgid "%s: xfsctl on file \"%s\" failed.\n" msgstr "" #: ../copy/xfs_copy.c:638 #, c-format msgid "%s: Warning -- a filesystem is mounted on the source device.\n" msgstr "" #: ../copy/xfs_copy.c:641 msgid "\t\tGenerated copies may be corrupt unless the source is\n" msgstr "" #: ../copy/xfs_copy.c:643 msgid "\t\tunmounted or mounted read-only. Copy proceeding...\n" msgstr "" #: ../copy/xfs_copy.c:661 #, c-format msgid "" "%s: couldn't initialize XFS library\n" "%s: Aborting.\n" msgstr "" #: ../copy/xfs_copy.c:675 #, c-format msgid "" "%s: %s filesystem failed to initialize\n" "%s: Aborting.\n" msgstr "" #: ../copy/xfs_copy.c:679 #, c-format msgid "" "%s %s filesystem failed to initialize\n" "%s: Aborting.\n" msgstr "" #: ../copy/xfs_copy.c:683 #, c-format msgid "" "%s: %s has an external log.\n" "%s: Aborting.\n" msgstr "" #: ../copy/xfs_copy.c:687 #, c-format msgid "" "%s: %s has a real-time section.\n" "%s: Aborting.\n" msgstr "" #: ../copy/xfs_copy.c:712 msgid "" "Error: filesystem block size is smaller than the disk sectorsize.\n" "Aborting XFS copy now.\n" msgstr "" #: ../copy/xfs_copy.c:733 #, c-format msgid "Creating file %s\n" msgstr "" #: ../copy/xfs_copy.c:751 #, c-format msgid "" "%s: a filesystem is mounted on target device \"%s\".\n" "%s cannot copy to mounted filesystems. Aborting\n" msgstr "" #: ../copy/xfs_copy.c:762 #, c-format msgid "%s: couldn't open target \"%s\"\n" msgstr "" #: ../copy/xfs_copy.c:772 #, c-format msgid "%s: cannot grow data section.\n" msgstr "" #: ../copy/xfs_copy.c:780 #, c-format msgid "%s: xfsctl on \"%s\" failed.\n" msgstr "" #: ../copy/xfs_copy.c:799 #, c-format msgid "%s: failed to write last block\n" msgstr "" #: ../copy/xfs_copy.c:801 #, c-format msgid "\tIs target \"%s\" too small?\n" msgstr "" #: ../copy/xfs_copy.c:811 msgid "Couldn't initialize global thread mask\n" msgstr "" #: ../copy/xfs_copy.c:818 msgid "Error initializing wbuf 0\n" msgstr "" #: ../copy/xfs_copy.c:826 msgid "Error initializing btree buf 1\n" msgstr "" #: ../copy/xfs_copy.c:831 msgid "Error creating first semaphore.\n" msgstr "" #: ../copy/xfs_copy.c:846 msgid "Couldn't malloc space for thread args\n" msgstr "" #: ../copy/xfs_copy.c:858 #, c-format msgid "Error creating thread mutex %d\n" msgstr "" #: ../copy/xfs_copy.c:875 #, c-format msgid "Error creating thread for target %d\n" msgstr "" #: ../copy/xfs_copy.c:968 msgid "WARNING: source filesystem inconsistent.\n" msgstr "" #: ../copy/xfs_copy.c:970 msgid " A leaf btree rec isn't a leaf. Aborting now.\n" msgstr "" #: ../growfs/xfs_growfs.c:34 #, c-format msgid "" "Usage: %s [options] mountpoint\n" "\n" "Options:\n" "\t-d grow data/metadata section\n" "\t-l grow log section\n" "\t-r grow realtime section\n" "\t-n don't change anything, just show geometry\n" "\t-I allow inode numbers to exceed %d significant bits\n" "\t-i convert log from external to internal format\n" "\t-t alternate location for mount table (/etc/mtab)\n" "\t-x convert log from internal to external format\n" "\t-D size grow data/metadata section to size blks\n" "\t-L size grow/shrink log section to size blks\n" "\t-R size grow realtime section to size blks\n" "\t-e size set realtime extent size to size blks\n" "\t-m imaxpct set inode max percent to imaxpct\n" "\t-V print version information\n" msgstr "" #: ../growfs/xfs_growfs.c:67 #, c-format msgid "" "meta-data=%-22s isize=%-6u agcount=%u, agsize=%u blks\n" " =%-22s sectsz=%-5u attr=%u\n" "data =%-22s bsize=%-6u blocks=%llu, imaxpct=%u\n" " =%-22s sunit=%-6u swidth=%u blks, unwritten=%u\n" "naming =version %-14u bsize=%-6u\n" "log =%-22s bsize=%-6u blocks=%u, version=%u\n" " =%-22s sectsz=%-5u sunit=%u blks\n" "realtime =%-22s extsz=%-6u blocks=%llu, rtextents=%llu\n" msgstr "" #: ../growfs/xfs_growfs.c:82 ../growfs/xfs_growfs.c:444 #: ../growfs/xfs_growfs.c:445 msgid "internal" msgstr "" #: ../growfs/xfs_growfs.c:82 ../growfs/xfs_growfs.c:85 #: ../growfs/xfs_growfs.c:444 ../growfs/xfs_growfs.c:445 msgid "external" msgstr "" #: ../growfs/xfs_growfs.c:85 ../mkfs/xfs_mkfs.c:1594 msgid "none" msgstr "" #: ../growfs/xfs_growfs.c:196 #, c-format msgid "%s: %s is not a mounted XFS filesystem\n" msgstr "" #: ../growfs/xfs_growfs.c:213 ../io/open.c:170 #, c-format msgid "%s: specified file [\"%s\"] is not on an XFS filesystem\n" msgstr "" #: ../growfs/xfs_growfs.c:230 #, c-format msgid "%s: cannot determine geometry of filesystem mounted at %s: %s\n" msgstr "" #: ../growfs/xfs_growfs.c:265 #, c-format msgid "%s: failed to access data device for %s\n" msgstr "" #: ../growfs/xfs_growfs.c:270 #, c-format msgid "%s: failed to access external log for %s\n" msgstr "" #: ../growfs/xfs_growfs.c:276 #, c-format msgid "%s: failed to access realtime device for %s\n" msgstr "" #: ../growfs/xfs_growfs.c:311 #, c-format msgid "data size %lld too large, maximum is %lld\n" msgstr "" #: ../growfs/xfs_growfs.c:321 #, c-format msgid "data size %lld too small, old size is %lld\n" msgstr "" #: ../growfs/xfs_growfs.c:329 #, c-format msgid "data size unchanged, skipping\n" msgstr "" #: ../growfs/xfs_growfs.c:332 #, c-format msgid "inode max pct unchanged, skipping\n" msgstr "" #: ../growfs/xfs_growfs.c:339 ../growfs/xfs_growfs.c:378 #: ../growfs/xfs_growfs.c:413 #, c-format msgid "%s: growfs operation in progress already\n" msgstr "" #: ../growfs/xfs_growfs.c:343 #, c-format msgid "%s: XFS_IOC_FSGROWFSDATA xfsctl failed: %s\n" msgstr "" #: ../growfs/xfs_growfs.c:359 #, c-format msgid "realtime size %lld too large, maximum is %lld\n" msgstr "" #: ../growfs/xfs_growfs.c:365 #, c-format msgid "realtime size %lld too small, old size is %lld\n" msgstr "" #: ../growfs/xfs_growfs.c:371 #, c-format msgid "realtime size unchanged, skipping\n" msgstr "" #: ../growfs/xfs_growfs.c:382 #, c-format msgid "%s: realtime growth not implemented\n" msgstr "" #: ../growfs/xfs_growfs.c:386 #, c-format msgid "%s: XFS_IOC_FSGROWFSRT xfsctl failed: %s\n" msgstr "" #: ../growfs/xfs_growfs.c:407 #, c-format msgid "log size unchanged, skipping\n" msgstr "" #: ../growfs/xfs_growfs.c:417 #, c-format msgid "%s: log growth not supported yet\n" msgstr "" #: ../growfs/xfs_growfs.c:421 #, c-format msgid "%s: XFS_IOC_FSGROWFSLOG xfsctl failed: %s\n" msgstr "" #: ../growfs/xfs_growfs.c:429 #, c-format msgid "%s: XFS_IOC_FSGEOMETRY xfsctl failed: %s\n" msgstr "" #: ../growfs/xfs_growfs.c:434 #, c-format msgid "data blocks changed from %lld to %lld\n" msgstr "" #: ../growfs/xfs_growfs.c:437 #, c-format msgid "inode max percent changed from %d to %d\n" msgstr "" #: ../growfs/xfs_growfs.c:440 #, c-format msgid "log blocks changed from %d to %d\n" msgstr "" #: ../growfs/xfs_growfs.c:443 #, c-format msgid "log changed from %s to %s\n" msgstr "" #: ../growfs/xfs_growfs.c:447 #, c-format msgid "realtime blocks changed from %lld to %lld\n" msgstr "" #: ../growfs/xfs_growfs.c:450 #, c-format msgid "realtime extent size changed from %d to %d\n" msgstr "" #: ../io/attr.c:57 #, c-format msgid "" "\n" " displays the set of extended inode flags associated with the current file\n" "\n" " Each individual flag is displayed as a single character, in this order:\n" " r -- file data is stored in the realtime section\n" " p -- file has preallocated extents (cannot be changed using chattr)\n" " i -- immutable, file cannot be modified\n" " a -- append-only, file can only be appended to\n" " s -- all updates are synchronous\n" " A -- the access time is not updated for this inode\n" " d -- do not include this file in a dump of the filesystem\n" " t -- child created in this directory has realtime bit set by default\n" " P -- child created in this directory has parents project ID by default\n" " n -- symbolic links cannot be created in this directory\n" " e -- for non-realtime files, observe the inode extent size value\n" " E -- children created in this directory inherit the extent size value\n" "\n" " Options:\n" " -R -- recursively descend (useful when current file is a directory)\n" " -D -- recursively descend, but only list attributes on directories\n" " -a -- show all flags which can be set alongside those which are set\n" " -v -- verbose mode; show long names of flags, not single characters\n" "\n" msgstr "" #: ../io/attr.c:86 #, c-format msgid "" "\n" " modifies the set of extended inode flags associated with the current file\n" "\n" " Examples:\n" " 'chattr +a' - sets the append-only flag\n" " 'chattr -a' - clears the append-only flag\n" "\n" " -R -- recursively descend (useful when current file is a directory)\n" " -D -- recursively descend, only modifying attributes on directories\n" " +/-r -- set/clear the realtime flag\n" " +/-i -- set/clear the immutable flag\n" " +/-a -- set/clear the append-only flag\n" " +/-s -- set/clear the sync flag\n" " +/-A -- set/clear the no-atime flag\n" " +/-d -- set/clear the no-dump flag\n" " +/-t -- set/clear the realtime inheritance flag\n" " +/-P -- set/clear the project ID inheritance flag\n" " +/-n -- set/clear the no-symbolic-links flag\n" " +/-e -- set/clear the extent-size flag\n" " +/-E -- set/clear the extent-size inheritance flag\n" " Note1: user must have certain capabilities to modify immutable/append-" "only.\n" " Note2: immutable/append-only files cannot be deleted; removing these files\n" " requires the immutable/append-only flag to be cleared first.\n" " Note3: the realtime flag can only be set if the filesystem has a realtime\n" " section, and the (regular) file must be empty when the flag is set.\n" "\n" msgstr "" #: ../io/attr.c:165 ../io/attr.c:241 ../io/open.c:403 ../io/open.c:475 #: ../io/open.c:599 ../io/open.c:621 ../libxfs/init.c:96 ../mkfs/proto.c:284 #: ../quota/project.c:87 ../quota/project.c:117 ../quota/project.c:147 #, c-format msgid "%s: cannot open %s: %s\n" msgstr "" #: ../io/attr.c:168 ../io/attr.c:215 ../io/attr.c:244 ../io/attr.c:315 #: ../quota/project.c:90 ../quota/project.c:121 ../quota/project.c:151 #, c-format msgid "%s: cannot get flags on %s: %s\n" msgstr "" #: ../io/attr.c:250 ../io/attr.c:321 #, c-format msgid "%s: cannot set flags on %s: %s\n" msgstr "" #: ../io/attr.c:285 ../io/attr.c:299 #, c-format msgid "%s: unknown flag\n" msgstr "" #: ../io/attr.c:305 #, c-format msgid "%s: bad chattr command, not +/-X\n" msgstr "" #: ../io/attr.c:330 msgid "chattr" msgstr "" #: ../io/attr.c:332 msgid "[-R|-D] [+/-" msgstr "" #: ../io/attr.c:332 msgid "]" msgstr "" #: ../io/attr.c:337 msgid "change extended inode flags on the currently open file" msgstr "" #: ../io/attr.c:340 msgid "lsattr" msgstr "" #: ../io/attr.c:342 msgid "[-R|-D|-a|-v]" msgstr "" #: ../io/attr.c:347 msgid "list extended inode flags set on the currently open file" msgstr "" #: ../io/bmap.c:30 #, c-format msgid "" "\n" " prints the block mapping for an XFS file's data or attribute forks\n" " Example:\n" " 'bmap -vp' - tabular format verbose map, including unwritten extents\n" "\n" " bmap prints the map of disk blocks used by the current file.\n" " The map lists each extent used by the file, as well as regions in the\n" " file that do not have any corresponding blocks (holes).\n" " By default, each line of the listing takes the following form:\n" " extent: [startoffset..endoffset]: startblock..endblock\n" " Holes are marked by replacing the startblock..endblock with 'hole'.\n" " All the file offsets and disk blocks are in units of 512-byte blocks.\n" " -a -- prints the attribute fork map instead of the data fork.\n" " -d -- suppresses a DMAPI read event, offline portions shown as holes.\n" " -l -- also displays the length of each extent in 512-byte blocks.\n" " Note: the bmap for non-regular files can be obtained provided the file\n" " was opened appropriately (in particular, must be opened read-only).\n" "\n" msgstr "" #: ../io/bmap.c:116 #, c-format msgid "%s: can't get geometry [\"%s\"]: %s\n" msgstr "" #: ../io/bmap.c:124 #, c-format msgid "%s: cannot read attrs on \"%s\": %s\n" msgstr "" #: ../io/bmap.c:142 #, c-format msgid "%s: malloc of %d bytes failed.\n" msgstr "" #: ../io/bmap.c:190 #, c-format msgid "%s: xfsctl(XFS_IOC_GETBMAPX) iflags=0x%x [\"%s\"]: %s\n" msgstr "" #: ../io/bmap.c:221 #, c-format msgid "%s: cannot realloc %d bytes\n" msgstr "" #: ../io/bmap.c:230 #, c-format msgid "%s: no extents\n" msgstr "" #: ../io/bmap.c:243 ../io/bmap.c:361 #, c-format msgid "hole" msgstr "" #: ../io/bmap.c:252 #, c-format msgid " %lld blocks\n" msgstr "" #: ../io/bmap.c:321 msgid "EXT" msgstr "" #: ../io/bmap.c:322 msgid "FILE-OFFSET" msgstr "" #: ../io/bmap.c:323 msgid "BLOCK-RANGE" msgstr "" #: ../io/bmap.c:324 msgid "AG" msgstr "" #: ../io/bmap.c:325 msgid "AG-OFFSET" msgstr "" #: ../io/bmap.c:326 msgid "TOTAL" msgstr "" #: ../io/bmap.c:327 msgid " FLAGS" msgstr "" #: ../io/bmap.c:390 #, c-format msgid " FLAG Values:\n" msgstr "" #: ../io/bmap.c:391 #, c-format msgid " %*.*o Unwritten preallocated extent\n" msgstr "" #: ../io/bmap.c:393 #, c-format msgid " %*.*o Doesn't begin on stripe unit\n" msgstr "" #: ../io/bmap.c:395 #, c-format msgid " %*.*o Doesn't end on stripe unit\n" msgstr "" #: ../io/bmap.c:397 #, c-format msgid " %*.*o Doesn't begin on stripe width\n" msgstr "" #: ../io/bmap.c:399 #, c-format msgid " %*.*o Doesn't end on stripe width\n" msgstr "" #: ../io/bmap.c:410 msgid "bmap" msgstr "" #: ../io/bmap.c:415 msgid "[-adlpv] [-n nx]" msgstr "" #: ../io/bmap.c:416 msgid "print block mapping for an XFS file" msgstr "" #: ../io/fadvise.c:31 #, c-format msgid "" "\n" " advise the page cache about expected I/O patterns on the current file\n" "\n" " Modifies kernel page cache behaviour when operating on the current file.\n" " The range arguments are required by some advise commands ([*] below).\n" " With no arguments, the POSIX_FADV_NORMAL advice is implied.\n" " -d -- don't need these pages (POSIX_FADV_DONTNEED) [*]\n" " -n -- data will be accessed once (POSIX_FADV_NOREUSE) [*]\n" " -r -- expect random page references (POSIX_FADV_RANDOM)\n" " -s -- expect sequential page references (POSIX_FADV_SEQUENTIAL)\n" " -w -- will need these pages (POSIX_FADV_WILLNEED) [*]\n" " Notes: these interfaces are not supported in Linux kernels before 2.6.\n" " NORMAL sets the default readahead setting on the file.\n" " RANDOM sets the readahead setting on the file to zero.\n" " SEQUENTIAL sets double the default readahead setting on the file.\n" " WILLNEED and NOREUSE are equivalent, and force the maximum readahead.\n" "\n" msgstr "" #: ../io/fadvise.c:93 ../io/madvise.c:87 ../io/mincore.c:48 ../io/mmap.c:206 #: ../io/mmap.c:301 ../io/mmap.c:407 ../io/mmap.c:554 ../io/prealloc.c:43 #: ../io/pwrite.c:282 ../io/sendfile.c:126 #, c-format msgid "non-numeric offset argument -- %s\n" msgstr "" #: ../io/fadvise.c:100 ../io/madvise.c:94 ../io/mincore.c:54 ../io/mmap.c:212 #: ../io/mmap.c:308 ../io/mmap.c:414 ../io/mmap.c:561 ../io/pread.c:360 #: ../io/pread.c:368 ../io/prealloc.c:48 ../io/pwrite.c:288 #: ../io/sendfile.c:133 #, c-format msgid "non-numeric length argument -- %s\n" msgstr "" #: ../io/fadvise.c:118 msgid "fadvise" msgstr "" #: ../io/fadvise.c:123 msgid "[-dnrsw] [off len]" msgstr "" #: ../io/fadvise.c:124 msgid "advisory commands for sections of a file" msgstr "" #: ../io/file.c:39 #, c-format msgid "%c%03d%c %-14s (%s,%s,%s,%s%s%s%s)\n" msgstr "" #: ../io/file.c:41 msgid "foreign" msgstr "" #: ../io/file.c:41 msgid "xfs" msgstr "" #: ../io/file.c:42 ../io/open.c:82 msgid "sync" msgstr "" #: ../io/file.c:42 ../io/open.c:82 msgid "non-sync" msgstr "" #: ../io/file.c:43 ../io/open.c:83 msgid "direct" msgstr "" #: ../io/file.c:43 ../io/open.c:83 msgid "non-direct" msgstr "" #: ../io/file.c:44 ../io/open.c:84 msgid "read-only" msgstr "" #: ../io/file.c:44 ../io/open.c:84 msgid "read-write" msgstr "" #: ../io/file.c:45 ../io/open.c:85 msgid ",real-time" msgstr "" #: ../io/file.c:46 ../io/open.c:86 msgid ",append-only" msgstr "" #: ../io/file.c:47 ../io/open.c:87 msgid ",non-block" msgstr "" #: ../io/file.c:81 ../io/sendfile.c:103 ../quota/path.c:107 #, c-format msgid "value %d is out of range (0-%d)\n" msgstr "" #: ../io/file.c:92 msgid "file" msgstr "" #: ../io/file.c:93 msgid "f" msgstr "" #: ../io/file.c:94 ../quota/path.c:121 msgid "[N]" msgstr "" #: ../io/file.c:99 msgid "set the current file" msgstr "" #: ../io/file.c:101 ../quota/path.c:127 msgid "print" msgstr "" #: ../io/file.c:102 ../quota/path.c:128 msgid "p" msgstr "" #: ../io/file.c:107 msgid "list current open files and memory mappings" msgstr "" #: ../io/freeze.c:37 #, c-format msgid "%s: cannot freeze filesystem at %s: %s\n" msgstr "" #: ../io/freeze.c:54 #, c-format msgid "%s: cannot unfreeze filesystem mounted at %s: %s\n" msgstr "" #: ../io/freeze.c:65 msgid "freeze" msgstr "" #: ../io/freeze.c:70 msgid "freeze filesystem of current file" msgstr "" #: ../io/freeze.c:72 msgid "thaw" msgstr "" #: ../io/freeze.c:77 msgid "unfreeze filesystem of current file" msgstr "" #: ../io/fsync.c:54 msgid "fsync" msgstr "" #: ../io/fsync.c:55 msgid "s" msgstr "" #: ../io/fsync.c:59 msgid "calls fsync(2) to flush all in-core file state to disk" msgstr "" #: ../io/fsync.c:61 msgid "fdatasync" msgstr "" #: ../io/fsync.c:62 msgid "ds" msgstr "" #: ../io/fsync.c:66 msgid "calls fdatasync(2) to flush the files in-core data to disk" msgstr "" #: ../io/getrusage.c:112 msgid "getrusage" msgstr "" #: ../io/getrusage.c:113 msgid "g" msgstr "" #: ../io/getrusage.c:118 msgid "report process resource usage" msgstr "" #: ../io/imap.c:53 #, c-format msgid "ino %10llu count %2d mask %016llx\n" msgstr "" #: ../io/imap.c:67 msgid "imap" msgstr "" #: ../io/imap.c:71 msgid "[nentries]" msgstr "" #: ../io/imap.c:73 msgid "inode map for filesystem of current file" msgstr "" #: ../io/init.c:35 #, c-format msgid "Usage: %s [-adFfmrRstx] [-p prog] [-c cmd]... file\n" msgstr "" #: ../io/init.c:95 ../io/mmap.c:168 ../io/mmap.c:175 ../io/mmap.c:178 #: ../io/open.c:281 #, c-format msgid "no files are open, try 'help open'\n" msgstr "" #: ../io/init.c:99 ../io/mmap.c:167 ../io/mmap.c:174 #, c-format msgid "no mapped regions, try 'help mmap'\n" msgstr "" #: ../io/init.c:105 #, c-format msgid "foreign file active, %s command is for XFS filesystems only\n" msgstr "" #: ../io/init.c:150 ../io/open.c:303 #, c-format msgid "non-numeric mode -- %s\n" msgstr "" #: ../io/inject.c:109 #, c-format msgid "" "\n" " inject errors into the filesystem of the currently open file\n" "\n" " Example:\n" " 'inject readagf' - cause errors on allocation group freespace reads\n" "\n" " Causes the kernel to generate and react to errors within XFS, provided\n" " the XFS kernel code has been built with debugging features enabled.\n" " With no arguments, displays the list of error injection tags.\n" "\n" msgstr "" #: ../io/inject.c:135 #, c-format msgid "no such tag -- %s\n" msgstr "" #: ../io/inject.c:151 msgid "inject" msgstr "" #: ../io/inject.c:156 msgid "[tag ...]" msgstr "" #: ../io/inject.c:157 msgid "inject errors into a filesystem" msgstr "" #: ../io/madvise.c:32 #, c-format msgid "" "\n" " advise the page cache about access patterns expected for a mapping\n" "\n" " Modifies page cache behavior when operating on the current mapping.\n" " The range arguments are required by some advise commands ([*] below).\n" " With no arguments, the POSIX_MADV_NORMAL advice is implied.\n" " -d -- don't need these pages (POSIX_MADV_DONTNEED) [*]\n" " -r -- expect random page references (POSIX_MADV_RANDOM)\n" " -s -- expect sequential page references (POSIX_MADV_SEQUENTIAL)\n" " -w -- will need these pages (POSIX_MADV_WILLNEED) [*]\n" " Notes:\n" " NORMAL sets the default readahead setting on the file.\n" " RANDOM sets the readahead setting on the file to zero.\n" " SEQUENTIAL sets double the default readahead setting on the file.\n" " WILLNEED forces the maximum readahead.\n" "\n" msgstr "" #: ../io/madvise.c:116 msgid "madvise" msgstr "" #: ../io/madvise.c:117 msgid "ma" msgstr "" #: ../io/madvise.c:122 msgid "[-drsw] [off len]" msgstr "" #: ../io/madvise.c:123 msgid "give advice about use of memory" msgstr "" #: ../io/mincore.c:87 ../io/mincore.c:97 #, c-format msgid "0x%lx %lu pages (%llu : %lu)\n" msgstr "" #: ../io/mincore.c:111 msgid "mincore" msgstr "" #: ../io/mincore.c:112 msgid "mi" msgstr "" #: ../io/mincore.c:117 msgid "[off len]" msgstr "" #: ../io/mincore.c:118 msgid "find mapping pages that are memory resident" msgstr "" #: ../io/mmap.c:76 #, c-format msgid "offset (%lld) is before start of mapping (%lld)\n" msgstr "" #: ../io/mmap.c:82 #, c-format msgid "offset (%lld) is beyond end of mapping (%lld)\n" msgstr "" #: ../io/mmap.c:87 #, c-format msgid "range (%lld:%lld) is beyond mapping (%lld:%ld)\n" msgstr "" #: ../io/mmap.c:93 #, c-format msgid "offset address (%p) is not page aligned\n" msgstr "" #: ../io/mmap.c:133 #, c-format msgid "" "\n" " maps a range within the current file into memory\n" "\n" " Example:\n" " 'mmap -rw 0 1m' - maps one megabyte from the start of the current file\n" "\n" " Memory maps a range of a file for subsequent use by other xfs_io commands.\n" " With no arguments, mmap shows the current mappings. The current mapping\n" " can be set by using the single argument form (mapping number or address).\n" " If two arguments are specified (a range), a new mapping is created and the\n" " following options are available:\n" " -r -- map with PROT_READ protection\n" " -w -- map with PROT_WRITE protection\n" " -x -- map with PROT_EXEC protection\n" " If no protection mode is specified, all are used by default.\n" "\n" msgstr "" #: ../io/mmap.c:254 #, c-format msgid "" "\n" " flushes a range of bytes in the current memory mapping\n" "\n" " Writes all modified copies of pages over the specified range (or entire\n" " mapping if no range specified) to their backing storage locations. Also,\n" " optionally invalidates so that subsequent references to the pages will be\n" " obtained from their backing storage locations (instead of cached copies).\n" " -a -- perform asynchronous writes (MS_ASYNC)\n" " -i -- invalidate mapped pages (MS_INVALIDATE)\n" " -s -- perform synchronous writes (MS_SYNC)\n" "\n" msgstr "" #: ../io/mmap.c:350 #, c-format msgid "" "\n" " reads a range of bytes in the current memory mapping\n" "\n" " Example:\n" " 'mread -v 512 20' - dumps 20 bytes read from 512 bytes into the mapping\n" "\n" " Accesses a range of the current memory mapping, optionally dumping it to\n" " the standard output stream (with -v option) for subsequent inspection.\n" " -f -- verbose mode, dump bytes with offsets relative to start of file.\n" " -r -- reverse order; start accessing fom the end of range, moving backward\n" " -v -- verbose mode, dump bytes with offsets relative to start of mapping.\n" " The accesses are performed sequentially from the start offset by default.\n" " Notes:\n" " References to whole pages following the end of the backing file results\n" " in delivery of the SIGBUS signal. SIGBUS signals may also be delivered\n" " on various filesystem conditions, including quota exceeded errors, and\n" " for physical device errors (such as unreadable disk blocks). No attempt\n" " has been made to catch signals at this stage...\n" "\n" msgstr "" #: ../io/mmap.c:502 #, c-format msgid "" "\n" " dirties a range of bytes in the current memory mapping\n" "\n" " Example:\n" " 'mwrite 512 20 - writes 20 bytes at 512 bytes into the current mapping.\n" "\n" " Stores a byte into memory for a range within a mapping.\n" " The default stored value is 'X', repeated to fill the range specified.\n" " -S -- use an alternate seed character\n" " -r -- reverse order; start storing fom the end of range, moving backward\n" " The stores are performed sequentially from the start offset by default.\n" "\n" msgstr "" #: ../io/mmap.c:538 ../io/pread.c:345 ../io/pwrite.c:249 ../io/pwrite.c:268 #, c-format msgid "non-numeric seed -- %s\n" msgstr "" #: ../io/mmap.c:587 msgid "mmap" msgstr "" #: ../io/mmap.c:588 msgid "mm" msgstr "" #: ../io/mmap.c:593 msgid "[N] | [-rwx] [off len]" msgstr "" #: ../io/mmap.c:595 msgid "mmap a range in the current file, show mappings" msgstr "" #: ../io/mmap.c:598 msgid "mread" msgstr "" #: ../io/mmap.c:599 msgid "mr" msgstr "" #: ../io/mmap.c:604 msgid "[-r] [off len]" msgstr "" #: ../io/mmap.c:606 msgid "reads data from a region in the current memory mapping" msgstr "" #: ../io/mmap.c:609 msgid "msync" msgstr "" #: ../io/mmap.c:610 msgid "ms" msgstr "" #: ../io/mmap.c:615 msgid "[-ais] [off len]" msgstr "" #: ../io/mmap.c:616 msgid "flush a region in the current memory mapping" msgstr "" #: ../io/mmap.c:619 msgid "munmap" msgstr "" #: ../io/mmap.c:620 msgid "mu" msgstr "" #: ../io/mmap.c:625 msgid "unmaps the current memory mapping" msgstr "" #: ../io/mmap.c:627 msgid "mwrite" msgstr "" #: ../io/mmap.c:628 msgid "mw" msgstr "" #: ../io/mmap.c:633 msgid "[-r] [-S seed] [off len]" msgstr "" #: ../io/mmap.c:635 msgid "writes data into a region in the current memory mapping" msgstr "" #: ../io/open.c:53 msgid "socket" msgstr "" #: ../io/open.c:55 msgid "directory" msgstr "" #: ../io/open.c:57 msgid "char device" msgstr "" #: ../io/open.c:59 msgid "block device" msgstr "" #: ../io/open.c:61 msgid "regular file" msgstr "" #: ../io/open.c:63 msgid "symbolic link" msgstr "" #: ../io/open.c:65 msgid "fifo" msgstr "" #: ../io/open.c:80 ../io/open.c:725 #, c-format msgid "fd.path = \"%s\"\n" msgstr "" #: ../io/open.c:81 #, c-format msgid "fd.flags = %s,%s,%s%s%s%s\n" msgstr "" #: ../io/open.c:91 #, c-format msgid "stat.ino = %lld\n" msgstr "" #: ../io/open.c:92 #, c-format msgid "stat.type = %s\n" msgstr "" #: ../io/open.c:93 #, c-format msgid "stat.size = %lld\n" msgstr "" #: ../io/open.c:94 #, c-format msgid "stat.blocks = %lld\n" msgstr "" #: ../io/open.c:96 #, c-format msgid "stat.atime = %s" msgstr "" #: ../io/open.c:97 #, c-format msgid "stat.mtime = %s" msgstr "" #: ../io/open.c:98 #, c-format msgid "stat.ctime = %s" msgstr "" #: ../io/open.c:107 #, c-format msgid "fsxattr.xflags = 0x%x " msgstr "" #: ../io/open.c:109 #, c-format msgid "fsxattr.projid = %u\n" msgstr "" #: ../io/open.c:110 #, c-format msgid "fsxattr.extsize = %u\n" msgstr "" #: ../io/open.c:111 #, c-format msgid "fsxattr.nextents = %u\n" msgstr "" #: ../io/open.c:112 #, c-format msgid "fsxattr.naextents = %u\n" msgstr "" #: ../io/open.c:117 #, c-format msgid "dioattr.mem = 0x%x\n" msgstr "" #: ../io/open.c:118 #, c-format msgid "dioattr.miniosz = %u\n" msgstr "" #: ../io/open.c:119 #, c-format msgid "dioattr.maxiosz = %u\n" msgstr "" #: ../io/open.c:243 #, c-format msgid "" "\n" " opens a new file in the requested mode\n" "\n" " Example:\n" " 'open -cd /tmp/data' - creates/opens data file read-write for direct IO\n" "\n" " Opens a file for subsequent use by all of the other xfs_io commands.\n" " With no arguments, open uses the stat command to show the current file.\n" " -F -- foreign filesystem file, disallow XFS-specific commands\n" " -a -- open with the O_APPEND flag (append-only mode)\n" " -d -- open with O_DIRECT (non-buffered IO, note alignment constraints)\n" " -f -- open with O_CREAT (create the file if it doesn't exist)\n" " -m -- permissions to use in case a new file is created (default 0600)\n" " -n -- open with O_NONBLOCK\n" " -r -- open with O_RDONLY, the default is O_RDWR\n" " -s -- open with O_SYNC\n" " -t -- open with O_TRUNC (truncate the file to zero length if it exists)\n" " -R -- mark the file as a realtime XFS file immediately after opening it\n" " Note1: usually read/write direct IO requests must be blocksize aligned;\n" " some kernels, however, allow sectorsize alignment for direct IO.\n" " Note2: the bmap for non-regular files can be obtained provided the file\n" " was opened correctly (in particular, must be opened read-only).\n" "\n" msgstr "" #: ../io/open.c:380 #, c-format msgid "" "\n" " displays the project identifier associated with the current path\n" "\n" " Options:\n" " -R -- recursively descend (useful when current path is a directory)\n" " -D -- recursively descend, but only list projects on directories\n" "\n" msgstr "" #: ../io/open.c:446 #, c-format msgid "projid = %u\n" msgstr "" #: ../io/open.c:454 #, c-format msgid "" "\n" " modifies the project identifier associated with the current path\n" "\n" " -R -- recursively descend (useful when current path is a directory)\n" " -D -- recursively descend, only modifying projects on directories\n" "\n" msgstr "" #: ../io/open.c:513 #, c-format msgid "invalid project ID -- %s\n" msgstr "" #: ../io/open.c:529 #, c-format msgid "" "\n" " report or modify prefered extent size (in bytes) for the current path\n" "\n" " -R -- recursively descend (useful when current path is a directory)\n" " -D -- recursively descend, only modifying extsize on directories\n" "\n" msgstr "" #: ../io/open.c:572 #, c-format msgid "invalid target file type - file %s\n" msgstr "" #: ../io/open.c:658 #, c-format msgid "non-numeric extsize argument -- %s\n" msgstr "" #: ../io/open.c:705 #, c-format msgid "invalid setfl argument -- '%c'\n" msgstr "" #: ../io/open.c:729 #, c-format msgid "statfs.f_bsize = %lld\n" msgstr "" #: ../io/open.c:730 #, c-format msgid "statfs.f_blocks = %lld\n" msgstr "" #: ../io/open.c:732 #, c-format msgid "statfs.f_frsize = %lld\n" msgstr "" #: ../io/open.c:734 #, c-format msgid "statfs.f_bavail = %lld\n" msgstr "" #: ../io/open.c:736 #, c-format msgid "statfs.f_files = %lld\n" msgstr "" #: ../io/open.c:737 #, c-format msgid "statfs.f_ffree = %lld\n" msgstr "" #: ../io/open.c:744 #, c-format msgid "geom.bsize = %u\n" msgstr "" #: ../io/open.c:745 #, c-format msgid "geom.agcount = %u\n" msgstr "" #: ../io/open.c:746 #, c-format msgid "geom.agblocks = %u\n" msgstr "" #: ../io/open.c:747 #, c-format msgid "geom.datablocks = %llu\n" msgstr "" #: ../io/open.c:749 #, c-format msgid "geom.rtblocks = %llu\n" msgstr "" #: ../io/open.c:751 #, c-format msgid "geom.rtextents = %llu\n" msgstr "" #: ../io/open.c:753 #, c-format msgid "geom.rtextsize = %u\n" msgstr "" #: ../io/open.c:754 #, c-format msgid "geom.sunit = %u\n" msgstr "" #: ../io/open.c:755 #, c-format msgid "geom.swidth = %u\n" msgstr "" #: ../io/open.c:760 #, c-format msgid "counts.freedata = %llu\n" msgstr "" #: ../io/open.c:762 #, c-format msgid "counts.freertx = %llu\n" msgstr "" #: ../io/open.c:764 #, c-format msgid "counts.freeino = %llu\n" msgstr "" #: ../io/open.c:766 #, c-format msgid "counts.allocino = %llu\n" msgstr "" #: ../io/open.c:775 msgid "open" msgstr "" #: ../io/open.c:776 msgid "o" msgstr "" #: ../io/open.c:781 msgid "[-acdrstx] [path]" msgstr "" #: ../io/open.c:782 msgid "open the file specified by path" msgstr "" #: ../io/open.c:785 msgid "stat" msgstr "" #: ../io/open.c:790 msgid "[-v]" msgstr "" #: ../io/open.c:791 msgid "statistics on the currently open file" msgstr "" #: ../io/open.c:793 msgid "close" msgstr "" #: ../io/open.c:794 msgid "c" msgstr "" #: ../io/open.c:799 msgid "close the current open file" msgstr "" #: ../io/open.c:801 msgid "setfl" msgstr "" #: ../io/open.c:803 msgid "[-adx]" msgstr "" #: ../io/open.c:806 msgid "set/clear append/direct flags on the open file" msgstr "" #: ../io/open.c:808 msgid "statfs" msgstr "" #: ../io/open.c:812 msgid "statistics on the filesystem of the currently open file" msgstr "" #: ../io/open.c:814 msgid "chproj" msgstr "" #: ../io/open.c:816 msgid "[-D | -R] projid" msgstr "" #: ../io/open.c:821 msgid "change project identifier on the currently open file" msgstr "" #: ../io/open.c:824 msgid "lsproj" msgstr "" #: ../io/open.c:826 msgid "[-D | -R]" msgstr "" #: ../io/open.c:831 msgid "list project identifier set on the currently open file" msgstr "" #: ../io/open.c:834 msgid "extsize" msgstr "" #: ../io/open.c:836 msgid "[-D | -R] [extsize]" msgstr "" #: ../io/open.c:841 msgid "get/set prefered extent size (in bytes) for the open file" msgstr "" #: ../io/parent.c:48 #, c-format msgid "%s%s" msgstr "" #: ../io/parent.c:53 #, c-format msgid "inode-path for inode: %llu is incorrect - path non-existent\n" msgstr "" #: ../io/parent.c:57 #, c-format msgid "path \"%s\" does not stat for inode: %llu; err = %s\n" msgstr "" #: ../io/parent.c:66 #, c-format msgid "path \"%s\" found\n" msgstr "" #: ../io/parent.c:72 #, c-format msgid "inode-path for inode: %llu is incorrect - wrong inode#\n" msgstr "" #: ../io/parent.c:76 ../io/parent.c:105 #, c-format msgid "ino mismatch for path \"%s\" %llu vs %llu\n" msgstr "" #: ../io/parent.c:84 #, c-format msgid "inode number match: %llu\n" msgstr "" #: ../io/parent.c:93 #, c-format msgid "parent path \"%s\" does not stat: %s\n" msgstr "" #: ../io/parent.c:101 #, c-format msgid "inode-path for inode: %llu is incorrect - wrong parent inode#\n" msgstr "" #: ../io/parent.c:114 #, c-format msgid "parent ino match for %llu\n" msgstr "" #: ../io/parent.c:139 #, c-format msgid "getparentpaths failed for ino %llu: %s\n" msgstr "" #: ../io/parent.c:148 #, c-format msgid "inode-path for inode: %llu is missing\n" msgstr "" #: ../io/parent.c:174 #, c-format msgid "can't stat mount point \"%s\": %s\n" msgstr "" #: ../io/parent.c:195 #, c-format msgid "failed to get bulkstat information for inode %llu\n" msgstr "" #: ../io/parent.c:201 #, c-format msgid "failed to get valid bulkstat information for inode %llu\n" msgstr "" #: ../io/parent.c:213 #, c-format msgid "checking inode %llu\n" msgstr "" #: ../io/parent.c:227 #, c-format msgid "syssgi bulkstat failed: %s\n" msgstr "" #: ../io/parent.c:253 #, c-format msgid "file argument, \"%s\", is not in a mounted XFS filesystem\n" msgstr "" #: ../io/parent.c:262 #, c-format msgid "unable to open \"%s\" for jdm: %s\n" msgstr "" #: ../io/parent.c:272 #, c-format msgid "unable to allocate buffers: %s\n" msgstr "" #: ../io/parent.c:281 #, c-format msgid "num errors: %d\n" msgstr "" #: ../io/parent.c:283 #, c-format msgid "succeeded checking %llu inodes\n" msgstr "" #: ../io/parent.c:293 #, c-format msgid "p_ino = %llu\n" msgstr "" #: ../io/parent.c:294 #, c-format msgid "p_gen = %u\n" msgstr "" #: ../io/parent.c:295 #, c-format msgid "p_reclen = %u\n" msgstr "" #: ../io/parent.c:296 #, c-format msgid "p_name = \"%s\"\n" msgstr "" #: ../io/parent.c:314 #, c-format msgid "%s: unable to allocate parent buffer: %s\n" msgstr "" #: ../io/parent.c:325 #, c-format msgid "%s: failed path_to_fshandle \"%s\": %s\n" msgstr "" #: ../io/parent.c:332 #, c-format msgid "%s: path_to_handle failed for \"%s\"\n" msgstr "" #: ../io/parent.c:357 #, c-format msgid "%s: getparentpaths failed for \"%s\": %s\n" msgstr "" #: ../io/parent.c:364 #, c-format msgid "%s: inode-path is missing\n" msgstr "" #: ../io/parent.c:423 #, c-format msgid "" "\n" " list the current file's parents and their filenames\n" "\n" " -c -- check the current file's file system for parent consistency\n" " -p -- list the current file's parents and their full paths\n" " -v -- verbose mode\n" "\n" msgstr "" #: ../io/parent.c:435 msgid "parent" msgstr "" #: ../io/parent.c:439 msgid "[-cpv]" msgstr "" #: ../io/parent.c:441 msgid "print or check parent inodes" msgstr "" #: ../io/pread.c:32 #, c-format msgid "" "\n" " reads a range of bytes in a specified block size from the given offset\n" "\n" " Example:\n" " 'pread -v 512 20' - dumps 20 bytes read from 512 bytes into the file\n" "\n" " Reads a segment of the currently open file, optionally dumping it to the\n" " standard output stream (with -v option) for subsequent inspection.\n" " The reads are performed in sequential blocks starting at offset, with the\n" " blocksize tunable using the -b option (default blocksize is 4096 bytes),\n" " unless a different pattern is requested.\n" " -B -- read backwards through the range from offset (backwards N bytes)\n" " -F -- read forwards through the range of bytes from offset (default)\n" " -v -- be verbose, dump out buffers (used when reading forwards)\n" " -R -- read at random offsets in the range of bytes\n" " -Z N -- zeed the random number generator (used when reading randomly)\n" " (heh, zorry, the -s/-S arguments were already in use in pwrite)\n" " When in \"random\" mode, the number of read operations will equal the\n" " number required to do a complete forward/backward scan of the range.\n" " Note that the offset within the range is chosen at random each time\n" " (an offset may be read more than once when operating in this mode).\n" "\n" msgstr "" #: ../io/pread.c:316 ../io/pwrite.c:215 #, c-format msgid "non-numeric bsize -- %s\n" msgstr "" #: ../io/pread.c:407 #, c-format msgid "read %lld/%lld bytes at offset %lld\n" msgstr "" #: ../io/pread.c:409 ../io/pwrite.c:335 ../io/sendfile.c:163 #, c-format msgid "%s, %d ops; %s (%s/sec and %.4f ops/sec)\n" msgstr "" #: ../io/pread.c:422 msgid "pread" msgstr "" #: ../io/pread.c:423 msgid "r" msgstr "" #: ../io/pread.c:428 msgid "[-b bs] [-v] off len" msgstr "" #: ../io/pread.c:429 msgid "reads a number of bytes at a specified offset" msgstr "" #: ../io/prealloc.c:125 msgid "allocsp" msgstr "" #: ../io/prealloc.c:130 ../io/prealloc.c:138 ../io/prealloc.c:146 #: ../io/prealloc.c:154 msgid "off len" msgstr "" #: ../io/prealloc.c:131 msgid "allocates zeroed space for part of a file" msgstr "" #: ../io/prealloc.c:133 msgid "freesp" msgstr "" #: ../io/prealloc.c:139 msgid "frees space associated with part of a file" msgstr "" #: ../io/prealloc.c:141 msgid "resvsp" msgstr "" #: ../io/prealloc.c:148 msgid "reserves space associated with part of a file" msgstr "" #: ../io/prealloc.c:150 msgid "unresvsp" msgstr "" #: ../io/prealloc.c:157 msgid "frees reserved space associated with part of a file" msgstr "" #: ../io/pwrite.c:31 #, c-format msgid "" "\n" " writes a range of bytes (in block size increments) from the given offset\n" "\n" " Example:\n" " 'pwrite 512 20' - writes 20 bytes at 512 bytes into the open file\n" "\n" " Writes into a segment of the currently open file, using either a buffer\n" " filled with a set pattern (0xcdcdcdcd) or data read from an input file.\n" " The writes are performed in sequential blocks starting at offset, with the\n" " blocksize tunable using the -b option (default blocksize is 4096 bytes),\n" " unless a different write pattern is requested.\n" " -S -- use an alternate seed number for filling the write buffer\n" " -i -- input file, source of data to write (used when writing forward)\n" " -d -- open the input file for direct IO\n" " -s -- skip a number of bytes at the start of the input file\n" " -w -- call fdatasync(2) at the end (included in timing results)\n" " -W -- call fsync(2) at the end (included in timing results)\n" " -B -- write backwards through the range from offset (backwards N bytes)\n" " -F -- write forwards through the range of bytes from offset (default)\n" " -R -- write at random offsets in the specified range of bytes\n" " -Z N -- zeed the random number generator (used when writing randomly)\n" " (heh, zorry, the -s/-S arguments were already in use in pwrite)\n" "\n" msgstr "" #: ../io/pwrite.c:242 #, c-format msgid "non-numeric skip -- %s\n" msgstr "" #: ../io/pwrite.c:333 #, c-format msgid "wrote %lld/%lld bytes at offset %lld\n" msgstr "" #: ../io/pwrite.c:350 msgid "pwrite" msgstr "" #: ../io/pwrite.c:351 msgid "w" msgstr "" #: ../io/pwrite.c:357 msgid "[-i infile [-d] [-s skip]] [-b bs] [-S seed] [-wW] off len" msgstr "" #: ../io/pwrite.c:359 msgid "writes a number of bytes at a specified offset" msgstr "" #: ../io/resblks.c:39 #, c-format msgid "non-numeric argument -- %s\n" msgstr "" #: ../io/resblks.c:51 #, c-format msgid "reserved blocks = %llu\n" msgstr "" #: ../io/resblks.c:53 #, c-format msgid "available reserved blocks = %llu\n" msgstr "" #: ../io/resblks.c:61 msgid "resblks" msgstr "" #: ../io/resblks.c:66 msgid "[blocks]" msgstr "" #: ../io/resblks.c:68 msgid "get and/or set count of reserved filesystem blocks" msgstr "" #: ../io/sendfile.c:32 #, c-format msgid "" "\n" " transfer a range of bytes from the given offset between files\n" "\n" " Example:\n" " 'send -f 2 512 20' - writes 20 bytes at 512 bytes into the open file\n" "\n" " Copies data between one file descriptor and another. Because this copying\n" " is done within the kernel, sendfile does not need to transfer data to and\n" " from user space.\n" " -f -- specifies an input file from which to source data to write\n" " -i -- specifies an input file name from which to source data to write.\n" " An offset and length in the source file can be optionally specified.\n" "\n" msgstr "" #: ../io/sendfile.c:161 #, c-format msgid "sent %lld/%lld bytes from offset %lld\n" msgstr "" #: ../io/sendfile.c:179 msgid "sendfile" msgstr "" #: ../io/sendfile.c:180 msgid "send" msgstr "" #: ../io/sendfile.c:186 msgid "-i infile | -f N [off len]" msgstr "" #: ../io/sendfile.c:188 msgid "Transfer data directly between file descriptors" msgstr "" #: ../io/shutdown.c:54 msgid "shutdown" msgstr "" #: ../io/shutdown.c:59 msgid "[-f]" msgstr "" #: ../io/shutdown.c:61 msgid "shuts down the filesystem where the current file resides" msgstr "" #: ../io/truncate.c:38 #, c-format msgid "non-numeric truncate argument -- %s\n" msgstr "" #: ../io/truncate.c:52 msgid "truncate" msgstr "" #: ../io/truncate.c:53 msgid "t" msgstr "" #: ../io/truncate.c:58 ../quota/state.c:516 msgid "off" msgstr "" #: ../io/truncate.c:60 msgid "truncates the current file at the given offset" msgstr "" #: ../libdisk/dm.c:56 #, c-format msgid "Warning - device mapper device, but no dmsetup(8) found\n" msgstr "" #: ../libdisk/dm.c:62 #, c-format msgid "Warning - device mapper device, but cannot resolve path %s: %s\n" msgstr "" #: ../libdisk/dm.c:73 ../libdisk/lvm.c:70 #, c-format msgid "Could not open pipe\n" msgstr "" #: ../libdisk/dm.c:88 ../libdisk/lvm.c:85 #, c-format msgid "Failed to execute %s\n" msgstr "" #: ../libdisk/dm.c:92 #, c-format msgid "Failed forking dmsetup process\n" msgstr "" #: ../libdisk/drivers.c:35 #, c-format msgid "Cannot stat %s: %s\n" msgstr "" #: ../libdisk/lvm.c:60 #, c-format msgid "Warning - LVM device, but no lvdisplay(8) found\n" msgstr "" #: ../libdisk/lvm.c:89 #, c-format msgid "Failed forking lvdisplay process\n" msgstr "" #: ../libdisk/md.c:52 #, c-format msgid "Error getting MD array info from %s\n" msgstr "" #: ../libxcmd/command.c:82 #, c-format msgid "command \"%s\" not found\n" msgstr "" #: ../libxcmd/command.c:90 #, c-format msgid "bad argument count %d to %s, expected at least %d arguments\n" msgstr "" #: ../libxcmd/command.c:94 #, c-format msgid "bad argument count %d to %s, expected %d arguments\n" msgstr "" #: ../libxcmd/command.c:98 #, c-format msgid "bad argument count %d to %s, expected between %d and %d arguments\n" msgstr "" #: ../libxcmd/command.c:160 #, c-format msgid "cannot strdup command '%s': %s\n" msgstr "" #: ../libxcmd/help.c:33 #, c-format msgid "" "\n" "Use 'help commandname' for extended help.\n" msgstr "" #: ../libxcmd/help.c:49 #, c-format msgid "command %s not found\n" msgstr "" #: ../libxcmd/help.c:86 msgid "help" msgstr "" #: ../libxcmd/help.c:87 msgid "?" msgstr "" #: ../libxcmd/help.c:92 msgid "[command]" msgstr "" #: ../libxcmd/help.c:93 msgid "help for one or all commands" msgstr "" #: ../libxcmd/paths.c:333 #, c-format msgid "%s: cannot initialise path table: %s\n" msgstr "" #: ../libxcmd/paths.c:348 #, c-format msgid "%s: cannot setup path for mount %s: %s\n" msgstr "" #: ../libxcmd/paths.c:361 #, c-format msgid "%s: no mount table yet, so no projects\n" msgstr "" #: ../libxcmd/paths.c:368 #, c-format msgid "%s: cannot setup path for project %s: %s\n" msgstr "" #: ../libxcmd/quit.c:36 msgid "quit" msgstr "" #: ../libxcmd/quit.c:37 msgid "q" msgstr "" #: ../libxcmd/quit.c:42 msgid "exit the program" msgstr "" #: ../libxfs/darwin.c:39 #, c-format msgid "%s: error opening the device special file \"%s\": %s\n" msgstr "" #: ../libxfs/darwin.c:46 #, c-format msgid "%s: can't tell if \"%s\" is writable: %s\n" msgstr "" #: ../libxfs/darwin.c:73 ../libxfs/freebsd.c:114 ../libxfs/irix.c:61 #: ../libxfs/linux.c:128 #, c-format msgid "%s: cannot stat the device file \"%s\": %s\n" msgstr "" #: ../libxfs/darwin.c:83 #, c-format msgid "%s: can't determine device size: %s\n" msgstr "" #: ../libxfs/freebsd.c:47 #, c-format msgid "%s: %s possibly contains a mounted filesystem\n" msgstr "" #: ../libxfs/freebsd.c:58 ../libxfs/linux.c:63 #, c-format msgid "%s: %s contains a mounted filesystem\n" msgstr "" #: ../libxfs/freebsd.c:73 ../libxfs/linux.c:81 #, c-format msgid "%s: %s contains a possibly writable, mounted filesystem\n" msgstr "" #: ../libxfs/freebsd.c:87 ../libxfs/linux.c:95 #, c-format msgid "%s: %s contains a mounted and writable filesystem\n" msgstr "" #: ../libxfs/freebsd.c:127 #, c-format msgid "%s: Not a device or file: \"%s\"n" msgstr "" #: ../libxfs/freebsd.c:134 #, c-format msgid "%s: DIOCGMEDIASIZE failed on \"%s\": %s\n" msgstr "" #: ../libxfs/freebsd.c:141 #, c-format msgid "%s: DIOCGSECTORSIZE failed on \"%s\": %s\n" msgstr "" #: ../libxfs/init.c:73 ../libxfs/init.c:157 #, c-format msgid "%s: %s: device %lld is not open\n" msgstr "" #: ../libxfs/init.c:102 #, c-format msgid "%s: cannot stat %s: %s\n" msgstr "" #: ../libxfs/init.c:120 #, c-format msgid "%s: device %lld is already open\n" msgstr "" #: ../libxfs/init.c:133 #, c-format msgid "%s: %s: too many open devices\n" msgstr "" #: ../libxfs/init.c:175 #, c-format msgid "%s: can't find a character device matching %s\n" msgstr "" #: ../libxfs/init.c:181 #, c-format msgid "%s: can't find a block device matching %s\n" msgstr "" #: ../libxfs/init.c:247 #, c-format msgid "%s: %s is not a volume device name\n" msgstr "" #: ../libxfs/init.c:256 #, c-format msgid "%s: %s has a data subvolume, cannot specify %s\n" msgstr "" #: ../libxfs/init.c:262 #, c-format msgid "%s: %s has a log subvolume, cannot specify %s\n" msgstr "" #: ../libxfs/init.c:268 #, c-format msgid "%s: %s has a realtime subvolume, cannot specify %s\n" msgstr "" #: ../libxfs/init.c:278 ../libxfs/init.c:289 ../libxfs/init.c:300 #, c-format msgid "%s: mknod failed: %s\n" msgstr "" #: ../libxfs/init.c:367 #, c-format msgid "%s: can't get size for data subvolume\n" msgstr "" #: ../libxfs/init.c:372 #, c-format msgid "%s: can't get size for log subvolume\n" msgstr "" #: ../libxfs/init.c:377 #, c-format msgid "%s: can't get size for realtime subvolume\n" msgstr "" #: ../libxfs/init.c:462 #, c-format msgid "%s: cannot read realtime bitmap inode (%d)\n" msgstr "" #: ../libxfs/init.c:471 #, c-format msgid "%s: cannot read realtime summary inode (%d)\n" msgstr "" #: ../libxfs/init.c:495 #, c-format msgid "%s: filesystem has a realtime subvolume\n" msgstr "" #: ../libxfs/init.c:517 #, c-format msgid "%s: realtime init - %llu != %llu\n" msgstr "" #: ../libxfs/init.c:525 #, c-format msgid "%s: realtime size check failed\n" msgstr "" #: ../libxfs/init.c:612 #, c-format msgid "%s: size check failed\n" msgstr "" #: ../libxfs/init.c:636 #, c-format msgid "%s: data size check failed\n" msgstr "" #: ../libxfs/init.c:649 #, c-format msgid "%s: log size checks failed\n" msgstr "" #: ../libxfs/init.c:659 #, c-format msgid "%s: realtime device init failed\n" msgstr "" #: ../libxfs/init.c:667 #, c-format msgid "%s: failed to alloc %ld bytes: %s\n" msgstr "" #: ../libxfs/init.c:681 #, c-format msgid "%s: cannot read root inode (%d)\n" msgstr "" #: ../libxfs/linux.c:107 #, c-format msgid "%s: warning - cannot set blocksize on block device %s: %s\n" msgstr "" #: ../libxfs/linux.c:149 #, c-format msgid "%s: can't determine device size\n" msgstr "" #: ../libxfs/linux.c:157 #, c-format msgid "%s: warning - cannot get sector size from block device %s: %s\n" msgstr "" #: ../libxfs/rdwr.c:38 #, c-format msgid "%s: %s can't memalign %d bytes: %s\n" msgstr "" #: ../libxfs/rdwr.c:48 #, c-format msgid "%s: %s seek to offset %llu failed: %s\n" msgstr "" #: ../libxfs/rdwr.c:58 #, c-format msgid "%s: %s write failed: %s\n" msgstr "" #: ../libxfs/rdwr.c:62 #, c-format msgid "%s: %s not progressing?\n" msgstr "" #: ../libxfs/rdwr.c:202 #, c-format msgid "%s: buf calloc failed (%ld bytes): %s\n" msgstr "" #: ../libxfs/rdwr.c:229 #, c-format msgid "%s: read failed: %s\n" msgstr "" #: ../libxfs/rdwr.c:276 #, c-format msgid "%s: pwrite64 failed: %s\n" msgstr "" #: ../libxfs/rdwr.c:283 #, c-format msgid "%s: error - wrote only %d of %d bytes\n" msgstr "" #: ../libxfs/rdwr.c:350 #, c-format msgid "%s: zone init failed (%s, %d bytes): %s\n" msgstr "" #: ../libxfs/rdwr.c:369 #, c-format msgid "%s: zone calloc failed (%s, %d bytes): %s\n" msgstr "" #: ../libxfs/rdwr.c:404 #, c-format msgid "%s: calloc failed (%d bytes): %s\n" msgstr "" #: ../libxfs/rdwr.c:435 #, c-format msgid "%s: realloc failed (%d bytes): %s\n" msgstr "" #: ../libxfs/trans.c:33 #, c-format msgid "%s: xact calloc failed (%d bytes): %s\n" msgstr "" #: ../libxfs/trans.c:557 #, c-format msgid "%s: warning - itobp failed (%d)\n" msgstr "" #: ../libxfs/trans.c:565 #, c-format msgid "%s: warning - iflush_int failed (%d)\n" msgstr "" #: ../libxfs/trans.c:646 ../libxfs/trans.c:730 #, c-format msgid "%s: unrecognised log item type\n" msgstr "" #: ../libxfs/util.c:739 #, c-format msgid "%s: cannot reserve space: %s\n" msgstr "" #: ../libxlog/util.c:37 #, c-format msgid "" "* ERROR: mismatched uuid in log\n" "* SB : %s\n" "* log: %s\n" msgstr "" #: ../libxlog/util.c:50 #, c-format msgid "" "\n" "LOG REC AT LSN cycle %d block %d (0x%x, 0x%x)\n" msgstr "" #: ../libxlog/util.c:58 #, c-format msgid "* ERROR: bad magic number in log header: 0x%x\n" msgstr "" #: ../libxlog/util.c:67 #, c-format msgid "* ERROR: log format incompatible (log=%d, ours=%d)\n" msgstr "" #: ../libxlog/util.c:77 ../libxlog/util.c:89 msgid "Bad log" msgstr "" #: ../mkfs/proto.c:60 #, c-format msgid "%s: failed to open %s: %s\n" msgstr "" #: ../mkfs/proto.c:66 ../mkfs/proto.c:291 #, c-format msgid "%s: read failed on %s: %s\n" msgstr "" #: ../mkfs/proto.c:71 #, c-format msgid "%s: proto file %s premature EOF\n" msgstr "" #: ../mkfs/proto.c:108 msgid "cannot reserve space" msgstr "" #: ../mkfs/proto.c:161 #, c-format msgid "%s: premature EOF in prototype file\n" msgstr "" #: ../mkfs/proto.c:180 msgid "error reserving space for a file" msgstr "" #: ../mkfs/proto.c:249 msgid "error allocating space for a file" msgstr "" #: ../mkfs/proto.c:253 #, c-format msgid "%s: cannot allocate space for file\n" msgstr "" #: ../mkfs/proto.c:322 msgid "directory createname error" msgstr "" #: ../mkfs/proto.c:339 msgid "directory create error" msgstr "" #: ../mkfs/proto.c:404 ../mkfs/proto.c:416 ../mkfs/proto.c:427 #: ../mkfs/proto.c:434 #, c-format msgid "%s: bad format string %s\n" msgstr "" #: ../mkfs/proto.c:453 ../mkfs/proto.c:494 ../mkfs/proto.c:510 #: ../mkfs/proto.c:523 ../mkfs/proto.c:536 ../mkfs/proto.c:548 msgid "Inode allocation failed" msgstr "" #: ../mkfs/proto.c:471 msgid "Inode pre-allocation failed" msgstr "" #: ../mkfs/proto.c:482 msgid "Pre-allocated file creation failed" msgstr "" #: ../mkfs/proto.c:569 msgid "Directory creation failed" msgstr "" #: ../mkfs/proto.c:593 msgid "Error encountered creating file from prototype file" msgstr "" #: ../mkfs/proto.c:643 msgid "Realtime bitmap inode allocation failed" msgstr "" #: ../mkfs/proto.c:661 msgid "Realtime summary inode allocation failed" msgstr "" #: ../mkfs/proto.c:687 msgid "Allocation of the realtime bitmap failed" msgstr "" #: ../mkfs/proto.c:700 msgid "Completion of the realtime bitmap failed" msgstr "" #: ../mkfs/proto.c:723 msgid "Allocation of the realtime summary failed" msgstr "" #: ../mkfs/proto.c:735 msgid "Completion of the realtime summary failed" msgstr "" #: ../mkfs/proto.c:752 msgid "Error initializing the realtime space" msgstr "" #: ../mkfs/proto.c:757 msgid "Error completing the realtime space" msgstr "" #: ../mkfs/xfs_mkfs.c:201 #, c-format msgid "data su/sw must not be used in conjunction with data sunit/swidth\n" msgstr "" #: ../mkfs/xfs_mkfs.c:208 #, c-format msgid "both data sunit and data swidth options must be specified\n" msgstr "" #: ../mkfs/xfs_mkfs.c:217 #, c-format msgid "data sunit/swidth must not be used in conjunction with data su/sw\n" msgstr "" #: ../mkfs/xfs_mkfs.c:224 #, c-format msgid "both data su and data sw options must be specified\n" msgstr "" #: ../mkfs/xfs_mkfs.c:231 #, c-format msgid "data su must be a multiple of the sector size (%d)\n" msgstr "" #: ../mkfs/xfs_mkfs.c:242 #, c-format msgid "" "data stripe width (%d) must be a multiple of the data stripe unit (%d)\n" msgstr "" #: ../mkfs/xfs_mkfs.c:252 #, c-format msgid "log su should not be used in conjunction with log sunit\n" msgstr "" #: ../mkfs/xfs_mkfs.c:261 #, c-format msgid "log sunit should not be used in conjunction with log su\n" msgstr "" #: ../mkfs/xfs_mkfs.c:278 #, c-format msgid "%s: %s appears to contain an existing filesystem (%s).\n" msgstr "" #: ../mkfs/xfs_mkfs.c:284 #, c-format msgid "%s: %s appears to contain a partition table (%s).\n" msgstr "" #: ../mkfs/xfs_mkfs.c:318 #, c-format msgid "log size %lld is not a multiple of the log stripe unit %d\n" msgstr "" #: ../mkfs/xfs_mkfs.c:346 #, c-format msgid "Due to stripe alignment, the internal log size (%lld) is too large.\n" msgstr "" #: ../mkfs/xfs_mkfs.c:348 #, c-format msgid "Must fit within an allocation group.\n" msgstr "" #: ../mkfs/xfs_mkfs.c:359 #, c-format msgid "log size %lld blocks too small, minimum size is %d blocks\n" msgstr "" #: ../mkfs/xfs_mkfs.c:365 #, c-format msgid "log size %lld blocks too large, maximum size is %d blocks\n" msgstr "" #: ../mkfs/xfs_mkfs.c:371 #, c-format msgid "log size %lld bytes too large, maximum size is %d bytes\n" msgstr "" #: ../mkfs/xfs_mkfs.c:442 #, c-format msgid "agsize (%lldb) too small, need at least %lld blocks\n" msgstr "" #: ../mkfs/xfs_mkfs.c:450 #, c-format msgid "agsize (%lldb) too big, maximum is %lld blocks\n" msgstr "" #: ../mkfs/xfs_mkfs.c:458 #, c-format msgid "agsize (%lldb) too big, data area is %lld blocks\n" msgstr "" #: ../mkfs/xfs_mkfs.c:465 #, c-format msgid "too many allocation groups for size = %lld\n" msgstr "" #: ../mkfs/xfs_mkfs.c:467 #, c-format msgid "need at most %lld allocation groups\n" msgstr "" #: ../mkfs/xfs_mkfs.c:475 #, c-format msgid "too few allocation groups for size = %lld\n" msgstr "" #: ../mkfs/xfs_mkfs.c:477 #, c-format msgid "need at least %lld allocation groups\n" msgstr "" #: ../mkfs/xfs_mkfs.c:490 #, c-format msgid "last AG size %lld blocks too small, minimum size is %lld blocks\n" msgstr "" #: ../mkfs/xfs_mkfs.c:501 #, c-format msgid "%lld allocation groups is too many, maximum is %lld\n" msgstr "" #: ../mkfs/xfs_mkfs.c:747 #, c-format msgid "%s: Specify data sunit in 512-byte blocks, no unit suffix\n" msgstr "" #: ../mkfs/xfs_mkfs.c:763 #, c-format msgid "%s: Specify data swidth in 512-byte blocks, no unit suffix\n" msgstr "" #: ../mkfs/xfs_mkfs.c:790 #, c-format msgid "%s: Specify data sw as multiple of su, no unit suffix\n" msgstr "" #: ../mkfs/xfs_mkfs.c:980 #, c-format msgid "Must specify log device\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1045 #, c-format msgid "Specify log sunit in 512-byte blocks, no size suffix\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1291 #, c-format msgid "extra arguments\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1297 #, c-format msgid "cannot specify both %s and -d name=%s\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1314 #, c-format msgid "illegal block size %d\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1333 #, c-format msgid "illegal sector size %d\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1338 #, c-format msgid "illegal log sector size %d\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1350 ../mkfs/xfs_mkfs.c:1360 #, c-format msgid "illegal directory block size %d\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1376 #, c-format msgid "both -d agcount= and agsize= specified, use one or the other\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1382 #, c-format msgid "if -d file then -d name and -d size are required\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1391 #, c-format msgid "illegal data length %lld, not a multiple of %d\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1397 #, c-format msgid "warning: data length %lld not a multiple of %d, truncated to %lld\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1412 #, c-format msgid "if -l file then -l name and -l size are required\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1422 #, c-format msgid "illegal log length %lld, not a multiple of %d\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1429 #, c-format msgid "warning: log length %lld not a multiple of %d, truncated to %lld\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1436 #, c-format msgid "if -r file then -r name and -r size are required\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1446 #, c-format msgid "illegal rt length %lld, not a multiple of %d\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1453 #, c-format msgid "warning: rt length %lld not a multiple of %d, truncated to %lld\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1466 #, c-format msgid "illegal rt extent size %lld, not a multiple of %d\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1472 #, c-format msgid "rt extent size %s too large, maximum %d\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1478 #, c-format msgid "rt extent size %s too small, minimum %d\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1520 #, c-format msgid "illegal inode size %d\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1525 #, c-format msgid "allowable inode size with %d byte blocks is %d\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1529 #, c-format msgid "allowable inode size with %d byte blocks is between %d and %d\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1537 #, c-format msgid "log stripe unit specified, using v2 logs\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1550 #, c-format msgid "no device name given in argument list\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1570 #, c-format msgid "%s: Use the -f option to force overwrite.\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1581 msgid "internal log" msgstr "" #: ../mkfs/xfs_mkfs.c:1583 msgid "volume log" msgstr "" #: ../mkfs/xfs_mkfs.c:1585 #, c-format msgid "no log subvolume or internal log\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1592 msgid "volume rt" msgstr "" #: ../mkfs/xfs_mkfs.c:1597 #, c-format msgid "" "size %s specified for data subvolume is too large, maximum is %lld blocks\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1604 #, c-format msgid "can't get size of data subvolume\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1609 #, c-format msgid "size %lld of data subvolume is too small, minimum %d blocks\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1616 #, c-format msgid "can't have both external and internal logs\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1620 #, c-format msgid "data and log sector sizes must be equal for internal logs\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1626 #, c-format msgid "" "Warning: the data subvolume sector size %u is less than the sector size \n" "reported by the device (%u).\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1632 #, c-format msgid "" "Warning: the log subvolume sector size %u is less than the sector size\n" "reported by the device (%u).\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1638 #, c-format msgid "" "Warning: the realtime subvolume sector size %u is less than the sector size\n" "reported by the device (%u).\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1652 #, c-format msgid "" "size %s specified for log subvolume is too large, maximum is %lld blocks\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1659 #, c-format msgid "size specified for non-existent log subvolume\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1662 #, c-format msgid "size %lld too large for internal log\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1689 #, c-format msgid "" "size %s specified for rt subvolume is too large, maximum is %lld blocks\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1697 #, c-format msgid "size specified for non-existent rt subvolume\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1714 #, c-format msgid "agsize (%lld) not a multiple of fs blk size (%d)\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1742 #, c-format msgid "" "%s: Specified data stripe unit %d is not the same as the volume stripe unit %" "d\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1748 #, c-format msgid "" "%s: Specified data stripe width %d is not the same as the volume stripe " "width %d\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1793 #, c-format msgid "agsize rounded to %lld, swidth = %d\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1800 #, c-format msgid "" "Allocation group size (%lld) is not a multiple of the stripe unit (%d)\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1822 #, c-format msgid "" "Warning: AG size is a multiple of stripe width. This can cause performance\n" "problems by aligning all AGs on the same disk. To avoid this, run mkfs " "with\n" "an AG size that is one stripe unit smaller, for example %llu.\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1847 #, c-format msgid "" "%s: Stripe unit(%d) or stripe width(%d) is not a multiple of the block size(%" "d)\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1862 #, c-format msgid "log stripe unit (%d) must be a multiple of the block size (%d)\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1875 #, c-format msgid "log stripe unit (%d bytes) is too large (maximum is 256KiB)\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1878 #, c-format msgid "log stripe unit adjusted to 32KiB\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1903 #, c-format msgid "internal log size %lld too large, must fit in allocation group\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1910 #, c-format msgid "log ag number %d too large, must be less than %lld\n" msgstr "" #: ../mkfs/xfs_mkfs.c:1940 #, c-format msgid "" "meta-data=%-22s isize=%-6d agcount=%lld, agsize=%lld blks\n" " =%-22s sectsz=%-5u attr=%u\n" "data =%-22s bsize=%-6u blocks=%llu, imaxpct=%u\n" " =%-22s sunit=%-6u swidth=%u blks, unwritten=%u\n" "naming =version %-14u bsize=%-6u\n" "log =%-22s bsize=%-6d blocks=%lld, version=%d\n" " =%-22s sectsz=%-5u sunit=%d blks\n" "realtime =%-22s extsz=%-6d blocks=%lld, rtextents=%lld\n" msgstr "" #: ../mkfs/xfs_mkfs.c:2046 #, c-format msgid "%s: Growing the data section failed\n" msgstr "" #: ../mkfs/xfs_mkfs.c:2075 #, c-format msgid "%s: filesystem failed to initialize\n" msgstr "" #: ../mkfs/xfs_mkfs.c:2299 #, c-format msgid "%s: root inode created in AG %u, not AG 0\n" msgstr "" #: ../mkfs/xfs_mkfs.c:2358 #, c-format msgid "Cannot specify both -%c %s and -%c %s\n" msgstr "" #: ../mkfs/xfs_mkfs.c:2369 #, c-format msgid "Illegal value %s for -%s option\n" msgstr "" #: ../mkfs/xfs_mkfs.c:2386 #, c-format msgid "-%c %s option requires a value\n" msgstr "" #: ../mkfs/xfs_mkfs.c:2399 ../repair/xfs_repair.c:129 #, c-format msgid "option respecified\n" msgstr "" #: ../mkfs/xfs_mkfs.c:2408 ../repair/xfs_repair.c:136 #, c-format msgid "unknown option -%c %s\n" msgstr "" #: ../mkfs/xfs_mkfs.c:2447 #, c-format msgid "blocksize not available yet.\n" msgstr "" #: ../mkfs/xfs_mkfs.c:2473 #, c-format msgid "" "Usage: %s\n" "/* blocksize */\t\t[-b log=n|size=num]\n" "/* data subvol */\t[-d agcount=n,agsize=n,file,name=xxx,size=num,\n" "\t\t\t (sunit=value,swidth=value|su=num,sw=num),\n" "\t\t\t sectlog=n|sectsize=num,unwritten=0|1]\n" "/* inode size */\t[-i log=n|perblock=n|size=num,maxpct=n,attr=0|1|2]\n" "/* log subvol */\t[-l agnum=n,internal,size=num,logdev=xxx,version=n\n" "\t\t\t sunit=value|su=num,sectlog=n|sectsize=num]\n" "/* label */\t\t[-L label (maximum 12 characters)]\n" "/* naming */\t\t[-n log=n|size=num,version=n]\n" "/* prototype file */\t[-p fname]\n" "/* quiet */\t\t[-q]\n" "/* realtime subvol */\t[-r extsize=num,size=num,rtdev=xxx]\n" "/* sectorsize */\t[-s log=n|size=num]\n" "/* version */\t\t[-V]\n" "\t\t\tdevicename\n" " is required unless -d name=xxx is given.\n" " is xxx (bytes), xxxs (sectors), xxxb (fs blocks), xxxk (xxx KiB),\n" " xxxm (xxx MiB), xxxg (xxx GiB), xxxt (xxx TiB) or xxxp (xxx PiB).\n" " is xxx (512 byte blocks).\n" msgstr "" #: ../quota/edit.c:36 #, c-format msgid "" "\n" " modify quota limits for the specified user\n" "\n" " Example:\n" " 'limit bsoft=100m bhard=110m tanya\n" "\n" " Changes the soft and/or hard block limits, inode limits and/or realtime\n" " block limits that are currently being used for the specified user, group,\n" " or project. The filesystem identified by the current path is modified.\n" " -d -- set the default values, used the first time a file is created\n" " -g -- modify group quota limits\n" " -p -- modify project quota limits\n" " -u -- modify user quota limits\n" " The block limit values can be specified with a units suffix - accepted\n" " units are: k (kilobytes), m (megabytes), g (gigabytes), and t (terabytes).\n" " The user/group/project can be specified either by name or by number.\n" "\n" msgstr "" #: ../quota/edit.c:59 #, c-format msgid "" "\n" " modify quota enforcement timeout for the current filesystem\n" "\n" " Example:\n" " 'timer -i 3days'\n" " (soft inode limit timer is changed to 3 days)\n" "\n" " Changes the timeout value associated with the block limits, inode limits\n" " and/or realtime block limits for all users, groups, or projects on the\n" " current filesystem.\n" " As soon as a user consumes the amount of space or number of inodes set as\n" " the soft limit, a timer is started. If the timer expires and the user is\n" " still over the soft limit, the soft limit is enforced as the hard limit.\n" " The default timeout is 7 days.\n" " -d -- set the default values, used the first time a file is created\n" " -g -- modify group quota timer\n" " -p -- modify project quota timer\n" " -u -- modify user quota timer\n" " -b -- modify the blocks-used timer\n" " -i -- modify the inodes-used timer\n" " -r -- modify the blocks-used timer for the (optional) realtime subvolume\n" " The timeout value is specified as a number of seconds, by default.\n" " However, a suffix may be used to alternatively specify minutes (m),\n" " hours (h), days (d), or weeks (w) - either the full word or the first\n" " letter of the word can be used.\n" "\n" msgstr "" #: ../quota/edit.c:91 #, c-format msgid "" "\n" " modify the number of quota warnings sent to the specified user\n" "\n" " Example:\n" " 'warn 2 jimmy'\n" " (tell the quota system that two warnings have been sent to user jimmy)\n" "\n" " Changes the warning count associated with the block limits, inode limits\n" " and/or realtime block limits for the specified user, group, or project.\n" " When a user has been warned the maximum number of times allowed, the soft\n" " limit is enforced as the hard limit. It is intended as an alternative to\n" " the timeout system, where the system administrator updates a count of the\n" " number of warnings issued to people, and they are penalised if the " "warnings\n" " are ignored.\n" " -d -- set maximum warning count, which triggers soft limit enforcement\n" " -g -- set group quota warning count\n" " -p -- set project quota warning count\n" " -u -- set user quota warning count\n" " -b -- set the blocks-used warning count\n" " -i -- set the inodes-used warning count\n" " -r -- set the blocks-used warn count for the (optional) realtime subvolume\n" " The user/group/project can be specified either by name or by number.\n" "\n" msgstr "" #: ../quota/edit.c:144 #, c-format msgid "%s: cannot set limits: %s\n" msgstr "" #: ../quota/edit.c:163 ../quota/edit.c:548 #, c-format msgid "%s: invalid user name: %s\n" msgstr "" #: ../quota/edit.c:185 ../quota/edit.c:564 #, c-format msgid "%s: invalid group name: %s\n" msgstr "" #: ../quota/edit.c:207 ../quota/edit.c:580 #, c-format msgid "%s: invalid project name: %s\n" msgstr "" #: ../quota/edit.c:318 #, c-format msgid "%s: unrecognised argument %s\n" msgstr "" #: ../quota/edit.c:324 #, c-format msgid "%s: cannot find any valid arguments\n" msgstr "" #: ../quota/edit.c:431 #, c-format msgid "%s: fopen on %s failed: %s\n" msgstr "" #: ../quota/edit.c:462 #, c-format msgid "%s: cannot set timer: %s\n" msgstr "" #: ../quota/edit.c:534 #, c-format msgid "%s: cannot set warnings: %s\n" msgstr "" #: ../quota/edit.c:661 msgid "limit" msgstr "" #: ../quota/edit.c:666 msgid "[-gpu] bsoft|bhard|isoft|ihard|rtbsoft|rtbhard=N -d|id|name" msgstr "" #: ../quota/edit.c:667 msgid "modify quota limits" msgstr "" #: ../quota/edit.c:670 msgid "restore" msgstr "" #: ../quota/edit.c:674 ../quota/report.c:32 ../quota/report.c:631 #: ../quota/state.c:528 msgid "[-gpu] [-f file]" msgstr "" #: ../quota/edit.c:675 msgid "restore quota limits from a backup file" msgstr "" #: ../quota/edit.c:677 msgid "timer" msgstr "" #: ../quota/edit.c:681 ../quota/edit.c:689 msgid "[-bir] [-gpu] value -d|id|name" msgstr "" #: ../quota/edit.c:682 msgid "get/set quota enforcement timeouts" msgstr "" #: ../quota/edit.c:685 msgid "warn" msgstr "" #: ../quota/edit.c:690 msgid "get/set enforcement warning counter" msgstr "" #: ../quota/free.c:29 #, c-format msgid "" "\n" " reports the number of free disk blocks and inodes\n" "\n" " This command reports the number of total, used, and available disk blocks.\n" " It can optionally report the same set of numbers for inodes and realtime\n" " disk blocks, and will report on all known XFS filesystem mount points and\n" " project quota paths by default (see 'print' command for a list).\n" " -b -- report the block count values\n" " -i -- report the inode count values\n" " -r -- report the realtime block count values\n" " -h -- report in a human-readable format\n" " -N -- suppress the header from the output\n" "\n" msgstr "" #: ../quota/free.c:137 #, c-format msgid "%s: project quota flag not set on %s\n" msgstr "" #: ../quota/free.c:145 #, c-format msgid "%s: project ID %u (%s) doesn't match ID %u (%s)\n" msgstr "" #: ../quota/free.c:210 #, c-format msgid "Filesystem " msgstr "" #: ../quota/free.c:210 #, c-format msgid "Filesystem " msgstr "" #: ../quota/free.c:213 #, c-format msgid " Size Used Avail Use%%" msgstr "" #: ../quota/free.c:214 #, c-format msgid " 1K-blocks Used Available Use%%" msgstr "" #: ../quota/free.c:217 #, c-format msgid " Inodes Used Free Use%%" msgstr "" #: ../quota/free.c:218 #, c-format msgid " Inodes IUsed IFree IUse%%" msgstr "" #: ../quota/free.c:219 #, c-format msgid " Pathname\n" msgstr "" #: ../quota/free.c:350 msgid "df" msgstr "" #: ../quota/free.c:351 ../repair/dir2.c:926 ../repair/dir2.c:1461 msgid "free" msgstr "" #: ../quota/free.c:355 msgid "[-bir] [-hn] [-f file]" msgstr "" #: ../quota/free.c:356 msgid "show free and used counts for blocks and inodes" msgstr "" #: ../quota/init.c:48 #, c-format msgid "Usage: %s [-p prog] [-c cmd]... [-d project]... [path]\n" msgstr "" #: ../quota/path.c:39 #, c-format msgid "%sFilesystem Pathname\n" msgstr "" #: ../quota/path.c:40 msgid " " msgstr "" #: ../quota/path.c:43 #, c-format msgid "%c%03d%c " msgstr "" #: ../quota/path.c:45 #, c-format msgid "%-19s %s" msgstr "" #: ../quota/path.c:48 #, c-format msgid " (project %u" msgstr "" #: ../quota/path.c:50 #, c-format msgid ", %s" msgstr "" #: ../quota/path.c:119 msgid "path" msgstr "" #: ../quota/path.c:120 msgid "paths" msgstr "" #: ../quota/path.c:125 msgid "set current path, or show the list of paths" msgstr "" #: ../quota/path.c:132 msgid "list known mount points and projects" msgstr "" #: ../quota/project.c:37 #, c-format msgid "" "\n" " list projects or setup a project tree for tree quota management\n" "\n" " Example:\n" " 'project -c logfiles'\n" " (match project 'logfiles' to a directory, and setup the directory tree)\n" "\n" " Without arguments, report all projects found in the /etc/projects file.\n" " The project quota mechanism in XFS can be used to implement a form of\n" " directory tree quota, where a specified directory and all of the files\n" " and subdirectories below it (i.e. a tree) can be restricted to using a\n" " subset of the available space in the filesystem.\n" "\n" " A managed tree must be setup initially using the -c option with a project.\n" " The specified project name or identifier is matched to one or more trees\n" " defined in /etc/projects, and these trees are then recursively descended\n" " to mark the affected inodes as being part of that tree - which sets inode\n" " flags and the project identifier on every file.\n" " Once this has been done, new files created in the tree will automatically\n" " be accounted to the tree based on their project identifier. An attempt to\n" " create a hard link to a file in the tree will only succeed if the project\n" " identifier matches the project identifer for the tree. The xfs_io utility\n" " can be used to set the project ID for an arbitrary file, but this can only\n" " be done by a privileged user.\n" "\n" " A previously setup tree can be cleared from project quota control through\n" " use of the -C option, which will recursively descend the tree, clearing\n" " the affected inodes from project quota control.\n" "\n" " The -c option can be used to check whether a tree is setup, it reports\n" " nothing if the tree is correct, otherwise it reports the paths of inodes\n" " which do not have the project ID of the rest of the tree, or if the inode\n" " flag is not set.\n" "\n" " The /etc/projid and /etc/projects file formats are simple, and described\n" " on the xfs_quota man page.\n" "\n" msgstr "" #: ../quota/project.c:94 #, c-format msgid "%s - project identifier is not set (inode=%u, tree=%u)\n" msgstr "" #: ../quota/project.c:98 #, c-format msgid "%s - project inheritance flag is not set\n" msgstr "" #: ../quota/project.c:130 #, c-format msgid "%s: cannot clear project on %s: %s\n" msgstr "" #: ../quota/project.c:160 #, c-format msgid "%s: cannot set project on %s: %s\n" msgstr "" #: ../quota/project.c:174 #, c-format msgid "Checking project %s (path %s)...\n" msgstr "" #: ../quota/project.c:178 #, c-format msgid "Setting up project %s (path %s)...\n" msgstr "" #: ../quota/project.c:182 #, c-format msgid "Clearing project %s (path %s)...\n" msgstr "" #: ../quota/project.c:205 #, c-format msgid "Processed %d %s paths for project %s\n" msgstr "" #: ../quota/project.c:241 #, c-format msgid "projects file \"%s\" doesn't exist\n" msgstr "" #: ../quota/project.c:249 #, c-format msgid "%s - no such project in %s\n" msgstr "" #: ../quota/project.c:262 msgid "project" msgstr "" #: ../quota/project.c:263 msgid "tree" msgstr "" #: ../quota/project.c:265 msgid "[-c|-s|-C] project ..." msgstr "" #: ../quota/project.c:268 msgid "check, setup or clear project quota trees" msgstr "" #: ../quota/quot.c:55 #, c-format msgid "" "\n" " display a summary of filesystem ownership\n" "\n" " -a -- summarise for all local XFS filesystem mount points\n" " -c -- display three columns giving file size in kilobytes, number of files\n" " of that size, and cumulative total of kilobytes in that size or\n" " smaller file. The last row is used as an overflow bucket and is the\n" " total of all files greater than 500 kilobytes.\n" " -v -- display three columns containing the number of kilobytes not\n" " accessed in the last 30, 60, and 90 days.\n" " -g -- display group summary\n" " -p -- display project summary\n" " -u -- display user summary\n" " -b -- display number of blocks used\n" " -i -- display number of inodes used\n" " -r -- display number of realtime blocks used\n" " -n -- skip identifier-to-name translations, just report IDs\n" " -N -- suppress the initial header\n" " -f -- send output to a file\n" " The (optional) user/group/project can be specified either by name or by\n" " number (i.e. uid/gid/projid).\n" "\n" msgstr "" #: ../quota/quot.c:219 #, c-format msgid "%s (%s) %s:\n" msgstr "" #: ../quota/quot.c:295 #, c-format msgid "%s (%s):\n" msgstr "" #: ../quota/quot.c:300 ../quota/quot.c:304 #, c-format msgid "%d\t%llu\t%llu\n" msgstr "" #: ../quota/quot.c:414 msgid "quot" msgstr "" #: ../quota/quot.c:418 msgid "[-bir] [-gpu] [-acv] [-f file]" msgstr "" #: ../quota/quot.c:419 msgid "summarize filesystem ownership" msgstr "" #: ../quota/quota.c:32 #, c-format msgid "" "\n" " display usage and quota information\n" "\n" " -g -- display group quota information\n" " -p -- display project quota information\n" " -u -- display user quota information\n" " -b -- display number of blocks used\n" " -i -- display number of inodes used\n" " -r -- display number of realtime blocks used\n" " -h -- report in a human-readable format\n" " -n -- skip identifier-to-name translations, just report IDs\n" " -N -- suppress the initial header\n" " -v -- increase verbosity in reporting (also dumps zero values)\n" " -f -- send output to a file\n" " The (optional) user/group/project can be specified either by name or by\n" " number (i.e. uid/gid/projid).\n" "\n" msgstr "" #: ../quota/quota.c:85 #, c-format msgid "" "Disk quotas for %s %s (%u)\n" "Filesystem%s" msgstr "" #: ../quota/quota.c:90 #, c-format msgid " Blocks Quota Limit Warn/Time " msgstr "" #: ../quota/quota.c:91 #, c-format msgid " Blocks Quota Limit Warn/Time " msgstr "" #: ../quota/quota.c:94 #, c-format msgid " Files Quota Limit Warn/Time " msgstr "" #: ../quota/quota.c:95 #, c-format msgid " Files Quota Limit Warn/Time " msgstr "" #: ../quota/quota.c:98 #, c-format msgid "Realtime Quota Limit Warn/Time " msgstr "" #: ../quota/quota.c:99 #, c-format msgid " Realtime Quota Limit Warn/Time " msgstr "" #: ../quota/quota.c:232 #, c-format msgid "%s: cannot find user %s\n" msgstr "" #: ../quota/quota.c:279 #, c-format msgid "%s: cannot find group %s\n" msgstr "" #: ../quota/quota.c:333 #, c-format msgid "%s: must specify a project name/ID\n" msgstr "" #: ../quota/quota.c:345 #, c-format msgid "%s: cannot find project %s\n" msgstr "" #: ../quota/quota.c:445 msgid "quota" msgstr "" #: ../quota/quota.c:446 msgid "l" msgstr "" #: ../quota/quota.c:450 msgid "[-bir] [-gpu] [-hnv] [-f file] [id|name]..." msgstr "" #: ../quota/quota.c:451 msgid "show usage and limits" msgstr "" #: ../quota/report.c:33 ../quota/report.c:632 msgid "dump quota information for backup utilities" msgstr "" #: ../quota/report.c:35 #, c-format msgid "" "\n" " create a backup file which contains quota limits information\n" " -g -- dump out group quota limits\n" " -p -- dump out project quota limits\n" " -u -- dump out user quota limits (default)\n" " -f -- write the dump out to the specified file\n" "\n" msgstr "" #: ../quota/report.c:47 ../quota/report.c:640 msgid "[-bir] [-gpu] [-ahnt] [-f file]" msgstr "" #: ../quota/report.c:48 ../quota/report.c:641 msgid "report filesystem quota information" msgstr "" #: ../quota/report.c:50 #, c-format msgid "" "\n" " report used space and inodes, and quota limits, for a filesystem\n" " Example:\n" " 'report -igh'\n" " (reports inode usage for all groups, in an easy-to-read format)\n" " This command is the equivalent of the traditional repquota command, which\n" " prints a summary of the disk usage and quotas for the current filesystem,\n" " or all filesystems.\n" " -a -- report for all mounted filesystems with quota enabled\n" " -h -- report in a human-readable format\n" " -n -- skip identifier-to-name translations, just report IDs\n" " -N -- suppress the header from the output\n" " -t -- terse output format, hides rows which are all zero\n" " -g -- report group usage and quota information\n" " -p -- report project usage and quota information\n" " -u -- report user usage and quota information\n" " -b -- report blocks-used information only\n" " -i -- report inodes-used information only\n" " -r -- report realtime-blocks-used information only\n" "\n" msgstr "" #: ../quota/report.c:221 #, c-format msgid "%s quota on %s (%s)\n" msgstr "" #: ../quota/report.c:246 ../quota/report.c:254 #, c-format msgid " Used Soft Hard Warn/Grace " msgstr "" #: ../quota/report.c:247 ../quota/report.c:255 #, c-format msgid " Used Soft Hard Warn/Grace " msgstr "" #: ../quota/report.c:250 #, c-format msgid " Used Soft Hard Warn/Grace " msgstr "" #: ../quota/report.c:251 #, c-format msgid " Used Soft Hard Warn/ Grace " msgstr "" #: ../quota/report.c:627 msgid "dump" msgstr "" #: ../quota/report.c:635 msgid "report" msgstr "" #: ../quota/report.c:636 msgid "repquota" msgstr "" #: ../quota/state.c:33 #, c-format msgid "" "\n" " turn filesystem quota off, both accounting and enforcement\n" "\n" " Example:\n" " 'off -uv' (switch off user quota on the current filesystem)\n" " This command is the equivalent of the traditional quotaoff command,\n" " which disables quota completely on a mounted filesystem.\n" " Note that there is no 'on' command - for XFS filesystems (with the\n" " exception of the root filesystem on IRIX) quota can only be enabled\n" " at mount time, through the use of one of the quota mount options.\n" "\n" " The state command is useful for displaying the current state. Using\n" " the -v (verbose) option with the 'off' command will display the quota\n" " state for the affected filesystem once the operation is complete.\n" " The affected quota type is -g (groups), -p (projects) or -u (users)\n" " and defaults to user quota (multiple types can be specified).\n" "\n" msgstr "" #: ../quota/state.c:56 #, c-format msgid "" "\n" " query the state of quota on the current filesystem\n" "\n" " This is a verbose status command, reporting whether or not accounting\n" " and/or enforcement are enabled for a filesystem, which inodes are in\n" " use as the quota state inodes, and how many extents and blocks are\n" " presently being used to hold that information.\n" " The quota type is specified via -g (groups), -p (projects) or -u (users)\n" " and defaults to user quota (multiple types can be specified).\n" "\n" msgstr "" #: ../quota/state.c:72 #, c-format msgid "" "\n" " enable quota enforcement on a filesystem\n" "\n" " If a filesystem is mounted and has quota accounting enabled, but not\n" " quota enforcement, enforcement can be enabled with this command.\n" " With the -v (verbose) option, the status of the filesystem will be\n" " reported after the operation is complete.\n" " The affected quota type is -g (groups), -p (projects) or -u (users)\n" " and defaults to user quota (multiple types can be specified).\n" "\n" msgstr "" #: ../quota/state.c:88 #, c-format msgid "" "\n" " disable quota enforcement on a filesystem\n" "\n" " If a filesystem is mounted and is currently enforcing quota, this\n" " provides a mechanism to switch off the enforcement, but continue to\n" " perform used space (and used inodes) accounting.\n" " The affected quota type is -g (groups), -p (projects) or -u (users).\n" "\n" msgstr "" #: ../quota/state.c:102 #, c-format msgid "" "\n" " remove any space being used by the quota subsystem\n" "\n" " Once quota has been switched 'off' on a filesystem, the space that\n" " was allocated to holding quota metadata can be freed via this command.\n" " The affected quota type is -g (groups), -p (projects) or -u (users)\n" " and defaults to user quota (multiple types can be specified).\n" "\n" msgstr "" #: ../quota/state.c:121 #, c-format msgid "%s quota state on %s (%s)\n" msgstr "" #: ../quota/state.c:123 #, c-format msgid " Accounting: %s\n" msgstr "" #: ../quota/state.c:123 ../quota/state.c:124 msgid "ON" msgstr "" #: ../quota/state.c:123 ../quota/state.c:124 msgid "OFF" msgstr "" #: ../quota/state.c:124 #, c-format msgid " Enforcement: %s\n" msgstr "" #: ../quota/state.c:125 #, c-format msgid " Inode: #%llu (%llu blocks, %lu extents)\n" msgstr "" #: ../quota/state.c:137 #, c-format msgid "%s grace time: %s\n" msgstr "" #: ../quota/state.c:154 #, c-format msgid "%s quota are not enabled on %s\n" msgstr "" #: ../quota/state.c:520 ../quota/state.c:536 ../quota/state.c:544 #: ../quota/state.c:552 msgid "[-gpu] [-v]" msgstr "" #: ../quota/state.c:521 msgid "permanently switch quota off for a path" msgstr "" #: ../quota/state.c:524 msgid "state" msgstr "" #: ../quota/state.c:529 msgid "get overall quota state information" msgstr "" #: ../quota/state.c:532 msgid "enable" msgstr "" #: ../quota/state.c:537 msgid "enable quota enforcement" msgstr "" #: ../quota/state.c:540 msgid "disable" msgstr "" #: ../quota/state.c:545 msgid "disable quota enforcement" msgstr "" #: ../quota/state.c:548 msgid "remove" msgstr "" #: ../quota/state.c:553 msgid "remove quota extents from a filesystem" msgstr "" #: ../quota/util.c:59 #, c-format msgid "[-none-]" msgstr "" #: ../quota/util.c:59 #, c-format msgid "[--none--]" msgstr "" #: ../quota/util.c:62 #, c-format msgid "[------]" msgstr "" #: ../quota/util.c:62 #, c-format msgid "[--------]" msgstr "" #: ../quota/util.c:66 ../quota/util.c:69 msgid "day" msgstr "" #: ../quota/util.c:66 ../quota/util.c:69 msgid "days" msgstr "" #: ../quota/util.c:194 msgid "Blocks" msgstr "" #: ../quota/util.c:194 msgid "Inodes" msgstr "" #: ../quota/util.c:194 msgid "Realtime Blocks" msgstr "" #: ../quota/util.c:209 msgid "User" msgstr "" #: ../quota/util.c:209 msgid "Group" msgstr "" #: ../quota/util.c:209 msgid "Project" msgstr "" #: ../quota/util.c:416 #, c-format msgid "%s: open on %s failed: %s\n" msgstr "" #: ../quota/util.c:421 #, c-format msgid "%s: fdopen on %s failed: %s\n" msgstr "" #: ../repair/agheader.c:35 #, c-format msgid "bad magic # 0x%x for agf %d\n" msgstr "" #: ../repair/agheader.c:44 #, c-format msgid "bad version # %d for agf %d\n" msgstr "" #: ../repair/agheader.c:54 #, c-format msgid "bad sequence # %d for agf %d\n" msgstr "" #: ../repair/agheader.c:64 #, c-format msgid "bad length %d for agf %d, should be %d\n" msgstr "" #: ../repair/agheader.c:77 #, c-format msgid "bad length %d for agf %d, should be %llu\n" msgstr "" #: ../repair/agheader.c:92 #, c-format msgid "flfirst %d in agf %d too large (max = %d)\n" msgstr "" #: ../repair/agheader.c:100 #, c-format msgid "fllast %d in agf %d too large (max = %d)\n" msgstr "" #: ../repair/agheader.c:122 #, c-format msgid "bad magic # 0x%x for agi %d\n" msgstr "" #: ../repair/agheader.c:131 #, c-format msgid "bad version # %d for agi %d\n" msgstr "" #: ../repair/agheader.c:141 #, c-format msgid "bad sequence # %d for agi %d\n" msgstr "" #: ../repair/agheader.c:151 #, c-format msgid "bad length # %d for agi %d, should be %d\n" msgstr "" #: ../repair/agheader.c:164 #, c-format msgid "bad length # %d for agi %d, should be %llu\n" msgstr "" #: ../repair/agheader.c:276 #, c-format msgid "zeroing unused portion of %s superblock (AG #%u)\n" msgstr "" #: ../repair/agheader.c:277 ../repair/agheader.c:283 msgid "primary" msgstr "" #: ../repair/agheader.c:277 ../repair/agheader.c:283 msgid "secondary" msgstr "" #: ../repair/agheader.c:282 #, c-format msgid "would zero unused portion of %s superblock (AG #%u)\n" msgstr "" #: ../repair/agheader.c:301 #, c-format msgid "bad flags field in superblock %d\n" msgstr "" #: ../repair/agheader.c:318 #, c-format msgid "non-null user quota inode field in superblock %d\n" msgstr "" #: ../repair/agheader.c:331 #, c-format msgid "non-null group quota inode field in superblock %d\n" msgstr "" #: ../repair/agheader.c:343 #, c-format msgid "non-null quota flags in superblock %d\n" msgstr "" #: ../repair/agheader.c:361 #, c-format msgid "bad shared version number in superblock %d\n" msgstr "" #: ../repair/agheader.c:373 #, c-format msgid "bad inode alignment field in superblock %d\n" msgstr "" #: ../repair/agheader.c:386 #, c-format msgid "bad stripe unit/width fields in superblock %d\n" msgstr "" #: ../repair/agheader.c:404 #, c-format msgid "bad log/data device sector size fields in superblock %d\n" msgstr "" #: ../repair/agheader.c:435 #, c-format msgid "bad on-disk superblock %d - %s\n" msgstr "" #: ../repair/agheader.c:442 #, c-format msgid "primary/secondary superblock %d conflict - %s\n" msgstr "" #: ../repair/attr_repair.c:105 msgid "" "entry contains illegal value in attribute named SGI_ACL_FILE or " "SGI_ACL_DEFAULT\n" msgstr "" #: ../repair/attr_repair.c:127 msgid "entry contains illegal value in attribute named SGI_MAC_LABEL\n" msgstr "" #: ../repair/attr_repair.c:133 msgid "entry contains illegal value in attribute named SGI_CAP_FILE\n" msgstr "" #: ../repair/attr_repair.c:172 #, c-format msgid "there are no attributes in the fork for inode %llu\n" msgstr "" #: ../repair/attr_repair.c:180 #, c-format msgid "would junk the attribute fork since count is 0 for inode %llu\n" msgstr "" #: ../repair/attr_repair.c:200 msgid "zero length name entry in attribute fork," msgstr "" #: ../repair/attr_repair.c:203 ../repair/attr_repair.c:225 #, c-format msgid " truncating attributes for inode %llu to %d\n" msgstr "" #: ../repair/attr_repair.c:208 ../repair/attr_repair.c:231 #, c-format msgid " would truncate attributes for inode %llu to %d\n" msgstr "" #: ../repair/attr_repair.c:222 msgid "name or value attribute lengths are too large,\n" msgstr "" #: ../repair/attr_repair.c:244 msgid "entry contains illegal character in shortform attribute name\n" msgstr "" #: ../repair/attr_repair.c:250 msgid "entry has INCOMPLETE flag on in shortform attribute\n" msgstr "" #: ../repair/attr_repair.c:268 #, c-format msgid "removing attribute entry %d for inode %llu\n" msgstr "" #: ../repair/attr_repair.c:280 #, c-format msgid "would remove attribute entry %d for inode %llu\n" msgstr "" #: ../repair/attr_repair.c:295 #, c-format msgid "" "would have corrected attribute entry count in inode %llu from %d to %d\n" msgstr "" #: ../repair/attr_repair.c:299 #, c-format msgid "corrected attribute entry count in inode %llu, was %d, now %d\n" msgstr "" #: ../repair/attr_repair.c:310 #, c-format msgid "would have corrected attribute totsize in inode %llu from %d to %d\n" msgstr "" #: ../repair/attr_repair.c:315 #, c-format msgid "corrected attribute entry totsize in inode %llu, was %d, now %d\n" msgstr "" #: ../repair/attr_repair.c:345 #, c-format msgid "remote block for attributes of inode %llu is missing\n" msgstr "" #: ../repair/attr_repair.c:353 #, c-format msgid "can't read remote block for attributes of inode %llu\n" msgstr "" #: ../repair/attr_repair.c:410 #, c-format msgid "bad attribute count %d in attr block %u, inode %llu\n" msgstr "" #: ../repair/attr_repair.c:427 #, c-format msgid "bad attribute nameidx %d in attr block %u, inode %llu\n" msgstr "" #: ../repair/attr_repair.c:437 #, c-format msgid "attribute entry #%d in attr block %u, inode %llu is INCOMPLETE\n" msgstr "" #: ../repair/attr_repair.c:448 #, c-format msgid "" "attribute entry %d in attr block %u, inode %llu claims already used space\n" msgstr "" #: ../repair/attr_repair.c:462 #, c-format msgid "" "attribute entry %d in attr block %u, inode %llu has bad name (namelen = %d)\n" msgstr "" #: ../repair/attr_repair.c:485 #, c-format msgid "bad hashvalue for attribute entry %d in attr block %u, inode %llu\n" msgstr "" #: ../repair/attr_repair.c:498 #, c-format msgid "" "bad security value for attribute entry %d in attr block %u, inode %llu\n" msgstr "" #: ../repair/attr_repair.c:526 #, c-format msgid "inconsistent remote attribute entry %d in attr block %u, ino %llu\n" msgstr "" #: ../repair/attr_repair.c:539 #, c-format msgid "cannot malloc enough for remotevalue attribute for inode %llu\n" msgstr "" #: ../repair/attr_repair.c:542 msgid "SKIPPING this remote attribute\n" msgstr "" #: ../repair/attr_repair.c:551 #, c-format msgid "remote attribute get failed for entry %d, inode %llu\n" msgstr "" #: ../repair/attr_repair.c:562 #, c-format msgid "remote attribute value check failed for entry %d, inode %llu\n" msgstr "" #: ../repair/attr_repair.c:579 #, c-format msgid "attribute entry %d in attr block %u, inode %llu claims used space\n" msgstr "" #: ../repair/attr_repair.c:604 #, c-format msgid "" "- resetting first used heap value from %d to %d in block %u of attribute " "fork of inode %llu\n" msgstr "" #: ../repair/attr_repair.c:614 #, c-format msgid "" "- would reset first used value from %d to %d in block %u of attribute fork " "of inode %llu\n" msgstr "" #: ../repair/attr_repair.c:625 #, c-format msgid "" "- resetting usedbytes cnt from %d to %d in block %u of attribute fork of " "inode %llu\n" msgstr "" #: ../repair/attr_repair.c:634 #, c-format msgid "" "- would reset usedbytes cnt from %d to %d in block %u of attribute fork of %" "llu\n" msgstr "" #: ../repair/attr_repair.c:683 #, c-format msgid "can't map block %u for attribute fork for inode %llu\n" msgstr "" #: ../repair/attr_repair.c:691 #, c-format msgid "" "can't read file block %u (fsbno %llu) for attribute fork of inode %llu\n" msgstr "" #: ../repair/attr_repair.c:702 #, c-format msgid "bad attribute leaf magic %#x for inode %llu\n" msgstr "" #: ../repair/attr_repair.c:734 #, c-format msgid "" "bad sibling back pointer for block %u in attribute fork for inode %llu\n" msgstr "" #: ../repair/attr_repair.c:763 #, c-format msgid "bad hash path in attribute fork for inode %llu\n" msgstr "" #: ../repair/attr_repair.c:864 #, c-format msgid "block 0 of inode %llu attribute fork is missing\n" msgstr "" #: ../repair/attr_repair.c:871 #, c-format msgid "agno of attribute fork of inode %llu out of regular partition\n" msgstr "" #: ../repair/attr_repair.c:879 #, c-format msgid "can't read block 0 of inode %llu attribute fork\n" msgstr "" #: ../repair/attr_repair.c:893 #, c-format msgid "clearing forw/back pointers in block 0 for attributes in inode %llu\n" msgstr "" #: ../repair/attr_repair.c:899 #, c-format msgid "" "would clear forw/back pointers in block 0 for attributes in inode %llu\n" msgstr "" #: ../repair/attr_repair.c:929 #, c-format msgid "bad attribute leaf magic # %#x for dir ino %llu\n" msgstr "" #: ../repair/attr_repair.c:989 ../repair/dinode.c:2476 #, c-format msgid "illegal attribute format %d, ino %llu\n" msgstr "" #: ../repair/avl.c:1039 ../repair/avl64.c:1032 #, c-format msgid "avl_insert: Warning! duplicate range [%llu,%llu]\n" msgstr "" #: ../repair/bmap.c:43 #, c-format msgid "realloc failed in blkent_append (%u bytes)\n" msgstr "" #: ../repair/bmap.c:65 #, c-format msgid "malloc failed in blkent_new (%u bytes)\n" msgstr "" #: ../repair/bmap.c:91 #, c-format msgid "malloc failed in blkent_prepend (%u bytes)\n" msgstr "" #: ../repair/bmap.c:118 #, c-format msgid "malloc failed in blkmap_alloc (%u bytes)\n" msgstr "" #: ../repair/bmap.c:203 #, c-format msgid "blkmap_getn realloc failed (%u bytes)\n" msgstr "" #: ../repair/bmap.c:239 #, c-format msgid "realloc failed in blkmap_grow (%u bytes)\n" msgstr "" #: ../repair/dino_chunks.c:57 #, c-format msgid "cannot read agbno (%u/%u), disk block %lld\n" msgstr "" #: ../repair/dino_chunks.c:153 #, c-format msgid "uncertain inode block %d/%d already known\n" msgstr "" #: ../repair/dino_chunks.c:169 ../repair/dino_chunks.c:435 #: ../repair/dino_chunks.c:492 #, c-format msgid "inode block %d/%d multiply claimed, (state %d)\n" msgstr "" #: ../repair/dino_chunks.c:175 ../repair/dino_chunks.c:497 #, c-format msgid "inode block %d/%d bad state, (state %d)\n" msgstr "" #: ../repair/dino_chunks.c:442 #, c-format msgid "uncertain inode block overlap, agbno = %d, ino = %llu\n" msgstr "" #: ../repair/dino_chunks.c:479 #, c-format msgid "uncertain inode block %llu already known\n" msgstr "" #: ../repair/dino_chunks.c:594 #, c-format msgid "cannot read inode %llu, disk block %lld, cnt %d\n" msgstr "" #: ../repair/dino_chunks.c:691 #, c-format msgid "can't read inode %llu, disk block %lld, cnt %d\n" msgstr "" #: ../repair/dino_chunks.c:711 ../repair/dino_chunks.c:880 #: ../repair/phase3.c:70 #, c-format msgid "bad state in block map %d\n" msgstr "" #: ../repair/dino_chunks.c:715 ../repair/dino_chunks.c:885 #, c-format msgid "inode block %llu multiply claimed, state was %d\n" msgstr "" #: ../repair/dino_chunks.c:752 #, c-format msgid "imap claims in-use inode %llu is free, " msgstr "" #: ../repair/dino_chunks.c:761 msgid "correcting imap\n" msgstr "" #: ../repair/dino_chunks.c:763 msgid "would correct imap\n" msgstr "" #: ../repair/dino_chunks.c:800 #, c-format msgid "cleared root inode %llu\n" msgstr "" #: ../repair/dino_chunks.c:804 #, c-format msgid "would clear root inode %llu\n" msgstr "" #: ../repair/dino_chunks.c:813 #, c-format msgid "cleared realtime bitmap inode %llu\n" msgstr "" #: ../repair/dino_chunks.c:818 #, c-format msgid "would clear realtime bitmap inode %llu\n" msgstr "" #: ../repair/dino_chunks.c:828 #, c-format msgid "cleared realtime summary inode %llu\n" msgstr "" #: ../repair/dino_chunks.c:833 #, c-format msgid "would clear realtime summary inode %llu\n" msgstr "" #: ../repair/dino_chunks.c:839 #, c-format msgid "cleared inode %llu\n" msgstr "" #: ../repair/dino_chunks.c:842 #, c-format msgid "would have cleared inode %llu\n" msgstr "" #: ../repair/dino_chunks.c:1018 ../repair/dino_chunks.c:1053 #: ../repair/dino_chunks.c:1167 msgid "found inodes not in the inode allocation tree\n" msgstr "" #: ../repair/dinode.c:70 msgid "Unknown inode format.\n" msgstr "" #: ../repair/dinode.c:87 #, c-format msgid "clearing inode %llu attributes\n" msgstr "" #: ../repair/dinode.c:90 #, c-format msgid "would have cleared inode %llu attributes\n" msgstr "" #: ../repair/dinode.c:517 ../repair/dinode.c:1141 ../repair/scan.c:158 msgid "data" msgstr "" #: ../repair/dinode.c:519 ../repair/dinode.c:1143 ../repair/scan.c:160 msgid "attr" msgstr "" #: ../repair/dinode.c:522 msgid "real-time" msgstr "" #: ../repair/dinode.c:524 msgid "regular" msgstr "" #: ../repair/dinode.c:534 #, c-format msgid "" "bmap rec out of order, inode %llu entry %d [o s c] [%llu %llu %llu], %d [%" "llu %llu %llu]\n" msgstr "" #: ../repair/dinode.c:548 #, c-format msgid "zero length extent (off = %llu, fsbno = %llu) in ino %llu\n" msgstr "" #: ../repair/dinode.c:555 #, c-format msgid "inode %llu - bad rt extent start block number %llu, offset %llu\n" msgstr "" #: ../repair/dinode.c:561 #, c-format msgid "inode %llu - bad rt extent last block number %llu, offset %llu\n" msgstr "" #: ../repair/dinode.c:567 #, c-format msgid "" "inode %llu - bad rt extent overflows - start %llu, end %llu, offset %llu\n" msgstr "" #: ../repair/dinode.c:575 #, c-format msgid "inode %llu - bad extent starting block number %llu, offset %llu\n" msgstr "" #: ../repair/dinode.c:581 #, c-format msgid "inode %llu - bad extent last block number %llu, offset %llu\n" msgstr "" #: ../repair/dinode.c:587 #, c-format msgid "inode %llu - bad extent overflows - start %llu, end %llu, offset %llu\n" msgstr "" #: ../repair/dinode.c:594 #, c-format msgid "" "inode %llu - extent offset too large - start %llu, count %llu, offset %llu\n" msgstr "" #: ../repair/dinode.c:613 #, c-format msgid "malformed rt inode extent [%llu %llu] (fs rtext size = %u)\n" msgstr "" #: ../repair/dinode.c:634 #, c-format msgid "" "data fork in rt ino %llu claims dup rt extent, off - %llu, start - %llu, " "count %llu\n" msgstr "" #: ../repair/dinode.c:658 #, c-format msgid "bad state in rt block map %llu\n" msgstr "" #: ../repair/dinode.c:665 #, c-format msgid "%s fork in rt inode %llu found metadata block %llu in %s bmap\n" msgstr "" #: ../repair/dinode.c:673 #, c-format msgid "%s fork in rt inode %llu claims used rt block %llu\n" msgstr "" #: ../repair/dinode.c:679 #, c-format msgid "illegal state %d in %s block map %llu\n" msgstr "" #: ../repair/dinode.c:714 #, c-format msgid "" "%s fork in ino %llu claims dup extent, off - %llu, start - %llu, cnt %llu\n" msgstr "" #: ../repair/dinode.c:736 #, c-format msgid "%s fork in ino %llu claims free block %llu\n" msgstr "" #: ../repair/dinode.c:743 #, c-format msgid "bad state in block map %llu\n" msgstr "" #: ../repair/dinode.c:750 #, c-format msgid "%s fork in inode %llu claims metadata block %llu\n" msgstr "" #: ../repair/dinode.c:757 #, c-format msgid "%s fork in %s inode %llu claims used block %llu\n" msgstr "" #: ../repair/dinode.c:762 #, c-format msgid "illegal state %d in block map %llu\n" msgstr "" #: ../repair/dinode.c:840 #, c-format msgid "cannot read inode (%u/%u), disk block %lld\n" msgstr "" #: ../repair/dinode.c:956 ../repair/dinode.c:1017 #, c-format msgid "cannot read bmap block %llu\n" msgstr "" #: ../repair/dinode.c:973 #, c-format msgid "# of bmap records in inode %llu exceeds max (%u, max - %u)\n" msgstr "" #: ../repair/dinode.c:982 #, c-format msgid "" "- # of bmap records in inode %llu less than minimum (%u, min - %u), " "proceeding ...\n" msgstr "" #: ../repair/dinode.c:1028 #, c-format msgid "# of bmap records in inode %llu greater than maximum (%u, max - %u)\n" msgstr "" #: ../repair/dinode.c:1037 #, c-format msgid "" "- # of bmap records in inode %llu less than minimum (%u, min - %u), " "continuing...\n" msgstr "" #: ../repair/dinode.c:1055 #, c-format msgid "could not map block %llu\n" msgstr "" #: ../repair/dinode.c:1087 #, c-format msgid "get_bmapi() called for local inode %llu\n" msgstr "" #: ../repair/dinode.c:1095 #, c-format msgid "bad inode format for inode %llu\n" msgstr "" #: ../repair/dinode.c:1159 #, c-format msgid "bad level 0 in inode %llu bmap btree root block\n" msgstr "" #: ../repair/dinode.c:1173 #, c-format msgid "" "indicated size of %s btree root (%d bytes) greater than space in inode %llu %" "s fork\n" msgstr "" #: ../repair/dinode.c:1203 ../repair/scan.c:384 #, c-format msgid "bad bmap btree ptr 0x%llx in ino %llu\n" msgstr "" #: ../repair/dinode.c:1225 #, c-format msgid "" "correcting key in bmbt root (was %llu, now %llu) in inode %llu %s fork\n" msgstr "" #: ../repair/dinode.c:1239 #, c-format msgid "" "bad key in bmbt root (is %llu, would reset to %llu) in inode %llu %s fork\n" msgstr "" #: ../repair/dinode.c:1258 #, c-format msgid "out of order bmbt root key %llu in inode %llu %s fork\n" msgstr "" #: ../repair/dinode.c:1275 #, c-format msgid "bad fwd (right) sibling pointer (saw %llu should be NULLDFSBNO)\n" msgstr "" #: ../repair/dinode.c:1278 #, c-format msgid "\tin inode %u (%s fork) bmap btree block %llu\n" msgstr "" #: ../repair/dinode.c:1359 #, c-format msgid "local inode %llu data fork is too large (size = %lld, max = %d)\n" msgstr "" #: ../repair/dinode.c:1369 #, c-format msgid "local inode %llu attr fork too large (size %d, max = %d)\n" msgstr "" #: ../repair/dinode.c:1377 #, c-format msgid "local inode %llu attr too small (size = %d, min size = %d)\n" msgstr "" #: ../repair/dinode.c:1407 #, c-format msgid "mismatch between format (%d) and size (%lld) in symlink ino %llu\n" msgstr "" #: ../repair/dinode.c:1415 #, c-format msgid "mismatch between format (%d) and size (%lld) in symlink inode %llu\n" msgstr "" #: ../repair/dinode.c:1431 #, c-format msgid "bad number of extents (%d) in symlink %llu data fork\n" msgstr "" #: ../repair/dinode.c:1444 #, c-format msgid "bad extent #%d offset (%llu) in symlink %llu data fork\n" msgstr "" #: ../repair/dinode.c:1450 #, c-format msgid "bad extent #%d count (%llu) in symlink %llu data fork\n" msgstr "" #: ../repair/dinode.c:1503 #, c-format msgid "symlink in inode %llu too long (%lld chars)\n" msgstr "" #: ../repair/dinode.c:1537 #, c-format msgid "cannot read inode %llu, file block %d, disk block %llu\n" msgstr "" #: ../repair/dinode.c:1559 #, c-format msgid "found illegal null character in symlink inode %llu\n" msgstr "" #: ../repair/dinode.c:1573 ../repair/dinode.c:1583 #, c-format msgid "component of symlink in inode %llu too long\n" msgstr "" #: ../repair/dinode.c:1609 #, c-format msgid "inode %llu has bad inode type (IFMNT)\n" msgstr "" #: ../repair/dinode.c:1619 #, c-format msgid "size of character device inode %llu != 0 (%lld bytes)\n" msgstr "" #: ../repair/dinode.c:1624 #, c-format msgid "size of block device inode %llu != 0 (%lld bytes)\n" msgstr "" #: ../repair/dinode.c:1629 #, c-format msgid "size of socket inode %llu != 0 (%lld bytes)\n" msgstr "" #: ../repair/dinode.c:1634 #, c-format msgid "size of fifo inode %llu != 0 (%lld bytes)\n" msgstr "" #: ../repair/dinode.c:1639 #, c-format msgid "Internal error - process_misc_ino_types, illegal type %d\n" msgstr "" #: ../repair/dinode.c:1666 #, c-format msgid "size of character device inode %llu != 0 (%llu blocks)\n" msgstr "" #: ../repair/dinode.c:1671 #, c-format msgid "size of block device inode %llu != 0 (%llu blocks)\n" msgstr "" #: ../repair/dinode.c:1676 #, c-format msgid "size of socket inode %llu != 0 (%llu blocks)\n" msgstr "" #: ../repair/dinode.c:1681 #, c-format msgid "size of fifo inode %llu != 0 (%llu blocks)\n" msgstr "" #: ../repair/dinode.c:1785 #, c-format msgid "bad magic number 0x%x on inode %llu, " msgstr "" #: ../repair/dinode.c:1788 msgid "resetting magic number\n" msgstr "" #: ../repair/dinode.c:1793 msgid "would reset magic number\n" msgstr "" #: ../repair/dinode.c:1796 #, c-format msgid "bad magic number 0x%x on inode %llu\n" msgstr "" #: ../repair/dinode.c:1805 #, c-format msgid "bad version number 0x%x on inode %llu, " msgstr "" #: ../repair/dinode.c:1808 msgid "resetting version number\n" msgstr "" #: ../repair/dinode.c:1814 msgid "would reset version number\n" msgstr "" #: ../repair/dinode.c:1817 #, c-format msgid "bad version number 0x%x on inode %llu\n" msgstr "" #: ../repair/dinode.c:1828 ../repair/dinode.c:1839 #, c-format msgid "bad (negative) size %lld on inode %llu\n" msgstr "" #: ../repair/dinode.c:1870 #, c-format msgid "imap claims a free inode %llu is in use, " msgstr "" #: ../repair/dinode.c:1873 msgid "correcting imap and clearing inode\n" msgstr "" #: ../repair/dinode.c:1882 msgid "would correct imap and clear inode\n" msgstr "" #: ../repair/dinode.c:1911 #, c-format msgid "bad inode format in inode %llu\n" msgstr "" #: ../repair/dinode.c:1972 #, c-format msgid "Unexpected inode type %#o inode %llu\n" msgstr "" #: ../repair/dinode.c:1982 #, c-format msgid "bad inode type for root inode %llu, " msgstr "" #: ../repair/dinode.c:1986 msgid "resetting to directory\n" msgstr "" #: ../repair/dinode.c:1992 msgid "would reset to directory\n" msgstr "" #: ../repair/dinode.c:1996 msgid "summary" msgstr "" #: ../repair/dinode.c:2000 msgid "bitmap" msgstr "" #: ../repair/dinode.c:2004 #, c-format msgid "user quota inode has bad type 0x%x\n" msgstr "" #: ../repair/dinode.c:2022 #, c-format msgid "group quota inode has bad type 0x%x\n" msgstr "" #: ../repair/dinode.c:2043 #, c-format msgid "bad inode type for realtime %s inode %llu, " msgstr "" #: ../repair/dinode.c:2047 msgid "resetting to regular file\n" msgstr "" #: ../repair/dinode.c:2053 msgid "would reset to regular file\n" msgstr "" #: ../repair/dinode.c:2072 #, c-format msgid "bad non-zero extent size %u for non-realtime/extsize inode %llu, " msgstr "" #: ../repair/dinode.c:2076 msgid "resetting to zero\n" msgstr "" #: ../repair/dinode.c:2080 msgid "would reset to zero\n" msgstr "" #: ../repair/dinode.c:2099 #, c-format msgid "bad size %llu for realtime %s inode %llu\n" msgstr "" #: ../repair/dinode.c:2115 #, c-format msgid "bad # of extents (%u) for realtime %s inode %llu\n" msgstr "" #: ../repair/dinode.c:2157 #, c-format msgid "mismatch between format (%d) and size (%lld) in directory ino %llu\n" msgstr "" #: ../repair/dinode.c:2179 #, c-format msgid "bad data fork in symlink %llu\n" msgstr "" #: ../repair/dinode.c:2221 #, c-format msgid "found inode %llu claiming to be a real-time file\n" msgstr "" #: ../repair/dinode.c:2240 #, c-format msgid "realtime bitmap inode %llu has bad size %lld (should be %lld)\n" msgstr "" #: ../repair/dinode.c:2261 #, c-format msgid "realtime summary inode %llu has bad size %lld (should be %d)\n" msgstr "" #: ../repair/dinode.c:2292 #, c-format msgid "bad attr fork offset %d in dev inode %llu, should be %d\n" msgstr "" #: ../repair/dinode.c:2303 #, c-format msgid "bad attr fork offset %d in uuid inode %llu, should be %d\n" msgstr "" #: ../repair/dinode.c:2315 #, c-format msgid "bad attr fork offset %d in inode %llu, max=%d\n" msgstr "" #: ../repair/dinode.c:2323 #, c-format msgid "unexpected inode format %d\n" msgstr "" #: ../repair/dinode.c:2367 ../repair/dinode.c:2419 #, c-format msgid "unknown format %d, ino %llu (mode = %d)\n" msgstr "" #: ../repair/dinode.c:2377 #, c-format msgid "bad data fork in inode %llu\n" msgstr "" #: ../repair/dinode.c:2443 #, c-format msgid "bad attribute format %d in inode %llu, " msgstr "" #: ../repair/dinode.c:2446 msgid "resetting value\n" msgstr "" #: ../repair/dinode.c:2450 msgid "would reset value\n" msgstr "" #: ../repair/dinode.c:2491 #, c-format msgid "bad attribute fork in inode %llu" msgstr "" #: ../repair/dinode.c:2495 msgid ", clearing attr fork\n" msgstr "" #: ../repair/dinode.c:2505 msgid ", would clear attr fork\n" msgstr "" #: ../repair/dinode.c:2542 #, c-format msgid "illegal attribute fmt %d, ino %llu\n" msgstr "" #: ../repair/dinode.c:2568 #, c-format msgid "problem with attribute contents in inode %llu\n" msgstr "" #: ../repair/dinode.c:2578 msgid "would clear attr fork\n" msgstr "" #: ../repair/dinode.c:2615 #, c-format msgid "correcting nblocks for inode %llu, was %llu - counted %llu\n" msgstr "" #: ../repair/dinode.c:2622 #, c-format msgid "bad nblocks %llu for inode %llu, would reset to %llu\n" msgstr "" #: ../repair/dinode.c:2629 #, c-format msgid "too many data fork extents (%llu) in inode %llu\n" msgstr "" #: ../repair/dinode.c:2646 #, c-format msgid "correcting nextents for inode %llu, was %d - counted %llu\n" msgstr "" #: ../repair/dinode.c:2654 #, c-format msgid "bad nextents %d for inode %llu, would reset to %llu\n" msgstr "" #: ../repair/dinode.c:2661 #, c-format msgid "too many attr fork extents (%llu) in inode %llu\n" msgstr "" #: ../repair/dinode.c:2678 #, c-format msgid "correcting anextents for inode %llu, was %d - counted %llu\n" msgstr "" #: ../repair/dinode.c:2687 #, c-format msgid "bad anextents %d for inode %llu, would reset to %llu\n" msgstr "" #: ../repair/dinode.c:2706 #, c-format msgid "problem with directory contents in inode %llu\n" msgstr "" #: ../repair/dinode.c:2719 #, c-format msgid "problem with symbolic link in inode %llu\n" msgstr "" #: ../repair/dinode.c:2731 #, c-format msgid "Unexpected inode type\n" msgstr "" #: ../repair/dinode.c:2775 #, c-format msgid "version 2 inode %llu claims > %u links, " msgstr "" #: ../repair/dinode.c:2779 msgid "updating superblock version number\n" msgstr "" #: ../repair/dinode.c:2782 msgid "would update superblock version number\n" msgstr "" #: ../repair/dinode.c:2790 #, c-format msgid "WARNING: version 2 inode %llu claims > %u links, " msgstr "" #: ../repair/dinode.c:2794 #, c-format msgid "" "converting back to version 1,\n" "\tthis may destroy %d links\n" msgstr "" #: ../repair/dinode.c:2809 #, c-format msgid "" "would convert back to version 1,\n" "\tthis might destroy %d links\n" msgstr "" #: ../repair/dinode.c:2824 #, c-format msgid "found version 2 inode %llu, " msgstr "" #: ../repair/dinode.c:2826 msgid "converting back to version 1\n" msgstr "" #: ../repair/dinode.c:2835 msgid "would convert back to version 1\n" msgstr "" #: ../repair/dinode.c:2850 #, c-format msgid "clearing obsolete nlink field in version 2 inode %llu, was %d, now 0\n" msgstr "" #: ../repair/dinode.c:2856 #, c-format msgid "" "would clear obsolete nlink field in version 2 inode %llu, currently %d\n" msgstr "" #: ../repair/dir.c:154 #, c-format msgid "invalid inode number %llu in directory %llu\n" msgstr "" #: ../repair/dir.c:159 #, c-format msgid "entry in shortform dir %llu references rt bitmap inode %llu\n" msgstr "" #: ../repair/dir.c:164 #, c-format msgid "entry in shortform dir %llu references rt summary inode %llu\n" msgstr "" #: ../repair/dir.c:169 #, c-format msgid "entry in shortform dir %llu references user quota inode %llu\n" msgstr "" #: ../repair/dir.c:174 #, c-format msgid "entry in shortform dir %llu references group quota inode %llu\n" msgstr "" #: ../repair/dir.c:194 #, c-format msgid "entry references free inode %llu in shortform directory %llu\n" msgstr "" #: ../repair/dir.c:213 #, c-format msgid "entry references non-existent inode %llu in shortform dir %llu\n" msgstr "" #: ../repair/dir.c:237 ../repair/dir2.c:967 #, c-format msgid "zero length entry in shortform dir %llu, resetting to %d\n" msgstr "" #: ../repair/dir.c:242 ../repair/dir2.c:973 #, c-format msgid "zero length entry in shortform dir %llu, would set to %d\n" msgstr "" #: ../repair/dir.c:247 #, c-format msgid "zero length entry in shortform dir %llu, " msgstr "" #: ../repair/dir.c:250 ../repair/dir.c:293 ../repair/dir2.c:1026 #, c-format msgid "junking %d entries\n" msgstr "" #: ../repair/dir.c:253 ../repair/dir.c:302 ../repair/dir2.c:1035 #, c-format msgid "would junk %d entries\n" msgstr "" #: ../repair/dir.c:271 ../repair/dir2.c:1003 #, c-format msgid "size of last entry overflows space left in in shortform dir %llu, " msgstr "" #: ../repair/dir.c:274 ../repair/dir2.c:1007 #, c-format msgid "resetting to %d\n" msgstr "" #: ../repair/dir.c:279 ../repair/dir2.c:1012 #, c-format msgid "would reset to %d\n" msgstr "" #: ../repair/dir.c:284 ../repair/dir2.c:1016 #, c-format msgid "size of entry #%d overflows space left in in shortform dir %llu\n" msgstr "" #: ../repair/dir.c:289 ../repair/dir2.c:1022 #, c-format msgid "junking entry #%d\n" msgstr "" #: ../repair/dir.c:298 ../repair/dir2.c:1031 #, c-format msgid "would junk entry #%d\n" msgstr "" #: ../repair/dir.c:321 ../repair/dir2.c:1053 #, c-format msgid "entry contains illegal character in shortform dir %llu\n" msgstr "" #: ../repair/dir.c:376 ../repair/dir2.c:1118 ../repair/phase6.c:2991 #: ../repair/phase6.c:3386 #, c-format msgid "junking entry \"%s\" in directory inode %llu\n" msgstr "" #: ../repair/dir.c:380 ../repair/dir2.c:1122 #, c-format msgid "would have junked entry \"%s\" in directory inode %llu\n" msgstr "" #: ../repair/dir.c:406 ../repair/dir2.c:1149 #, c-format msgid "would have corrected entry count in directory %llu from %d to %d\n" msgstr "" #: ../repair/dir.c:410 ../repair/dir2.c:1153 #, c-format msgid "corrected entry count in directory %llu, was %d, now %d\n" msgstr "" #: ../repair/dir.c:421 ../repair/dir2.c:1182 #, c-format msgid "would have corrected directory %llu size from %lld to %lld\n" msgstr "" #: ../repair/dir.c:426 ../repair/dir2.c:1188 #, c-format msgid "corrected directory %llu size, was %lld, now %lld\n" msgstr "" #: ../repair/dir.c:449 ../repair/dir2.c:1233 #, c-format msgid "bogus .. inode number (%llu) in directory inode %llu, " msgstr "" #: ../repair/dir.c:452 ../repair/dir.c:486 ../repair/dir2.c:1238 #: ../repair/dir2.c:1273 msgid "clearing inode number\n" msgstr "" #: ../repair/dir.c:458 ../repair/dir.c:492 ../repair/dir2.c:1244 #: ../repair/dir2.c:1279 msgid "would clear inode number\n" msgstr "" #: ../repair/dir.c:466 ../repair/dir2.c:1251 #, c-format msgid "corrected root directory %llu .. entry, was %llu, now %llu\n" msgstr "" #: ../repair/dir.c:474 ../repair/dir2.c:1259 #, c-format msgid "would have corrected root directory %llu .. entry from %llu to %llu\n" msgstr "" #: ../repair/dir.c:483 #, c-format msgid "bad .. entry in dir ino %llu, points to self, " msgstr "" #: ../repair/dir.c:546 #, c-format msgid "bad range claimed [%d, %d) in da block\n" msgstr "" #: ../repair/dir.c:553 #, c-format msgid "byte range end [%d %d) in da block larger than blocksize %d\n" msgstr "" #: ../repair/dir.c:560 #, c-format msgid "multiply claimed byte %d in da block\n" msgstr "" #: ../repair/dir.c:590 #, c-format msgid "hole (start %d, len %d) out of range, block %d, dir ino %llu\n" msgstr "" #: ../repair/dir.c:601 #, c-format msgid "hole claims used byte %d, block %d, dir ino %llu\n" msgstr "" #: ../repair/dir.c:716 #, c-format msgid "- derived hole value %d, saw %d, block %d, dir ino %llu\n" msgstr "" #: ../repair/dir.c:735 #, c-format msgid "" "- derived hole (base %d, size %d) in block %d, dir inode %llu not found\n" msgstr "" #: ../repair/dir.c:811 ../repair/dir.c:989 ../repair/phase4.c:234 #: ../repair/phase4.c:718 ../repair/phase6.c:1039 ../repair/phase6.c:1557 #, c-format msgid "can't read block %u (fsbno %llu) for directory inode %llu\n" msgstr "" #: ../repair/dir.c:815 #, c-format msgid "can't read block %u (fsbno %llu) for attrbute fork of inode %llu\n" msgstr "" #: ../repair/dir.c:824 ../repair/dir.c:999 ../repair/phase6.c:1049 #, c-format msgid "bad dir/attr magic number in inode %llu, file bno = %u, fsbno = %llu\n" msgstr "" #: ../repair/dir.c:832 ../repair/dir2.c:312 #, c-format msgid "bad record count in inode %llu, count = %d, max = %d\n" msgstr "" #: ../repair/dir.c:851 ../repair/dir2.c:329 #, c-format msgid "bad directory btree for directory inode %llu\n" msgstr "" #: ../repair/dir.c:855 #, c-format msgid "bad attribute fork btree for inode %llu\n" msgstr "" #: ../repair/dir.c:909 #, c-format msgid "release_da_cursor_int got unexpected non-null bp, dabno = %u\n" msgstr "" #: ../repair/dir.c:970 ../repair/dir.c:1015 #, c-format msgid "bmap of block #%u of inode %llu failed\n" msgstr "" #: ../repair/dir.c:1061 #, c-format msgid "directory/attribute block used/count inconsistency - %d/%hu\n" msgstr "" #: ../repair/dir.c:1071 ../repair/dir2.c:452 #, c-format msgid "" "directory/attribute block hashvalue inconsistency, expected > %u / saw %u\n" msgstr "" #: ../repair/dir.c:1078 ../repair/dir2.c:459 #, c-format msgid "bad directory/attribute forward block pointer, expected 0, saw %u\n" msgstr "" #: ../repair/dir.c:1084 #, c-format msgid "bad directory block in dir ino %llu\n" msgstr "" #: ../repair/dir.c:1114 #, c-format msgid "" "correcting bad hashval in non-leaf dir/attr block\n" "\tin (level %d) in inode %llu.\n" msgstr "" #: ../repair/dir.c:1122 #, c-format msgid "" "would correct bad hashval in non-leaf dir/attr block\n" "\tin (level %d) in inode %llu.\n" msgstr "" #: ../repair/dir.c:1260 ../repair/dir2.c:624 #, c-format msgid "can't get map info for block %u of directory inode %llu\n" msgstr "" #: ../repair/dir.c:1269 #, c-format msgid "can't read block %u (%llu) for directory inode %llu\n" msgstr "" #: ../repair/dir.c:1283 #, c-format msgid "bad magic number %x in block %u (%llu) for directory inode %llu\n" msgstr "" #: ../repair/dir.c:1291 #, c-format msgid "bad back pointer in block %u (%llu) for directory inode %llu\n" msgstr "" #: ../repair/dir.c:1298 #, c-format msgid "entry count %d too large in block %u (%llu) for directory inode %llu\n" msgstr "" #: ../repair/dir.c:1305 #, c-format msgid "bad level %d in block %u (%llu) for directory inode %llu\n" msgstr "" #: ../repair/dir.c:1363 #, c-format msgid "" "correcting bad hashval in interior dir/attr block\n" "\tin (level %d) in inode %llu.\n" msgstr "" #: ../repair/dir.c:1371 #, c-format msgid "" "would correct bad hashval in interior dir/attr block\n" "\tin (level %d) in inode %llu.\n" msgstr "" #: ../repair/dir.c:1491 #, c-format msgid "marking bad entry in directory inode %llu\n" msgstr "" #: ../repair/dir.c:1517 #, c-format msgid "deleting zero length entry in directory inode %llu\n" msgstr "" #: ../repair/dir.c:1616 #, c-format msgid "deleting entry in directory inode %llu\n" msgstr "" #: ../repair/dir.c:1765 msgid "couldn't allocate directory block freemap\n" msgstr "" #: ../repair/dir.c:1778 #, c-format msgid "" "directory block header conflicts with used space in directory inode %llu\n" msgstr "" #: ../repair/dir.c:1807 #, c-format msgid "" "nameidx %d for entry #%d, bno %d, ino %llu > fs blocksize, deleting entry\n" msgstr "" #: ../repair/dir.c:1847 #, c-format msgid "" "nameidx %d, entry #%d, bno %d, ino %llu > fs blocksize, marking entry bad\n" msgstr "" #: ../repair/dir.c:1864 #, c-format msgid "" "nameidx %d, entry #%d, bno %d, ino %llu > fs blocksize, would delete entry\n" msgstr "" #: ../repair/dir.c:1901 #, c-format msgid "invalid ino number %llu in dir ino %llu, entry #%d, bno %d\n" msgstr "" #: ../repair/dir.c:1905 ../repair/dir.c:1921 ../repair/dir.c:1938 #: ../repair/dir.c:1954 ../repair/dir.c:1971 #, c-format msgid "\tclearing ino number in entry %d...\n" msgstr "" #: ../repair/dir.c:1912 ../repair/dir.c:1929 ../repair/dir.c:1945 #: ../repair/dir.c:1962 ../repair/dir.c:1979 #, c-format msgid "\twould clear ino number in entry %d...\n" msgstr "" #: ../repair/dir.c:1917 #, c-format msgid "" "entry #%d, bno %d in directory %llu references realtime bitmap inode %llu\n" msgstr "" #: ../repair/dir.c:1934 #, c-format msgid "" "entry #%d, bno %d in directory %llu references realtime summary inode %llu\n" msgstr "" #: ../repair/dir.c:1950 #, c-format msgid "entry #%d, bno %d in directory %llu references user quota inode %llu\n" msgstr "" #: ../repair/dir.c:1967 #, c-format msgid "entry #%d, bno %d in directory %llu references group quota inode %llu\n" msgstr "" #: ../repair/dir.c:2010 #, c-format msgid "entry references free inode %llu in directory %llu, will clear entry\n" msgstr "" #: ../repair/dir.c:2018 #, c-format msgid "entry references free inode %llu in directory %llu, would clear entry\n" msgstr "" #: ../repair/dir.c:2026 #, c-format msgid "bad ino number %llu in dir ino %llu, entry #%d, bno %d\n" msgstr "" #: ../repair/dir.c:2029 msgid "clearing inode number...\n" msgstr "" #: ../repair/dir.c:2034 msgid "would clear inode number...\n" msgstr "" #: ../repair/dir.c:2054 #, c-format msgid "entry #%d, dir inode %llu, has zero-len name, deleting entry\n" msgstr "" #: ../repair/dir.c:2093 #, c-format msgid "entry #%d, dir inode %llu, has zero-len name, marking entry bad\n" msgstr "" #: ../repair/dir.c:2107 #, c-format msgid "" "bad size, entry #%d in dir inode %llu, block %u -- entry overflows block\n" msgstr "" #: ../repair/dir.c:2118 #, c-format msgid "" "dir entry slot %d in block %u conflicts with used space in dir inode %llu\n" msgstr "" #: ../repair/dir.c:2157 #, c-format msgid "illegal name \"%s\" in directory inode %llu, entry will be cleared\n" msgstr "" #: ../repair/dir.c:2163 #, c-format msgid "illegal name \"%s\" in directory inode %llu, entry would be cleared\n" msgstr "" #: ../repair/dir.c:2173 #, c-format msgid "\tmismatched hash value for entry \"%s\"\n" msgstr "" #: ../repair/dir.c:2177 #, c-format msgid "\t\tin directory inode %llu. resetting hash value.\n" msgstr "" #: ../repair/dir.c:2183 #, c-format msgid "\t\tin directory inode %llu. would reset hash value.\n" msgstr "" #: ../repair/dir.c:2213 #, c-format msgid "\tbad hash ordering for entry \"%s\"\n" msgstr "" #: ../repair/dir.c:2217 #, c-format msgid "\t\tin directory inode %llu. will clear entry\n" msgstr "" #: ../repair/dir.c:2225 #, c-format msgid "\t\tin directory inode %llu. would clear entry\n" msgstr "" #: ../repair/dir.c:2242 #, c-format msgid "" "name \"%s\" (block %u, slot %d) conflicts with used space in dir inode %llu\n" msgstr "" #: ../repair/dir.c:2249 #, c-format msgid "will clear entry \"%s\" (#%d) in directory inode %llu\n" msgstr "" #: ../repair/dir.c:2253 #, c-format msgid "would clear entry \"%s\" (#%d)in directory inode %llu\n" msgstr "" #: ../repair/dir.c:2289 #, c-format msgid "bad .. entry in dir ino %llu, points to self" msgstr "" #: ../repair/dir.c:2293 ../repair/dir.c:2390 msgid "will clear entry\n" msgstr "" #: ../repair/dir.c:2298 ../repair/dir.c:2394 ../repair/dir2.c:1626 msgid "would clear entry\n" msgstr "" #: ../repair/dir.c:2308 #, c-format msgid "correcting .. entry in root inode %llu, was %llu\n" msgstr "" #: ../repair/dir.c:2315 #, c-format msgid "bad .. entry (%llu) in root inode %llu should be %llu\n" msgstr "" #: ../repair/dir.c:2332 #, c-format msgid "multiple .. entries in directory inode %llu, will clear second entry\n" msgstr "" #: ../repair/dir.c:2338 #, c-format msgid "multiple .. entries in directory inode %llu, would clear second entry\n" msgstr "" #: ../repair/dir.c:2351 #, c-format msgid ". in directory inode %llu has wrong value (%llu), fixing entry...\n" msgstr "" #: ../repair/dir.c:2358 #, c-format msgid ". in directory inode %llu has wrong value (%llu)\n" msgstr "" #: ../repair/dir.c:2364 #, c-format msgid "multiple . entries in directory inode %llu\n" msgstr "" #: ../repair/dir.c:2371 #, c-format msgid "will clear one . entry in directory inode %llu\n" msgstr "" #: ../repair/dir.c:2377 #, c-format msgid "would clear one . entry in directory inode %llu\n" msgstr "" #: ../repair/dir.c:2387 #, c-format msgid "entry \"%s\" in directory inode %llu points to self, " msgstr "" #: ../repair/dir.c:2412 #, c-format msgid "" "- resetting first used heap value from %d to %d in block %u of dir ino %llu\n" msgstr "" #: ../repair/dir.c:2421 #, c-format msgid "" "- would reset first used value from %d to %d in block %u of dir ino %llu\n" msgstr "" #: ../repair/dir.c:2432 #, c-format msgid "- resetting namebytes cnt from %d to %d in block %u of dir inode %llu\n" msgstr "" #: ../repair/dir.c:2441 #, c-format msgid "" "- would reset namebytes cnt from %d to %d in block %u of dir inode %llu\n" msgstr "" #: ../repair/dir.c:2477 #, c-format msgid "- found unexpected lost holes in block %u, dir inode %llu\n" msgstr "" #: ../repair/dir.c:2485 #, c-format msgid "- hole info non-optimal in block %u, dir inode %llu\n" msgstr "" #: ../repair/dir.c:2492 #, c-format msgid "- hole info incorrect in block %u, dir inode %llu\n" msgstr "" #: ../repair/dir.c:2503 #, c-format msgid "- existing hole info for block %d, dir inode %llu (base, size) - \n" msgstr "" #: ../repair/dir.c:2511 #, c-format msgid "- holes flag = %d\n" msgstr "" #: ../repair/dir.c:2517 #, c-format msgid "- compacting block %u in dir inode %llu\n" msgstr "" #: ../repair/dir.c:2558 #, c-format msgid "not enough space in block %u of dir inode %llu for all entries\n" msgstr "" #: ../repair/dir.c:2626 #, c-format msgid "- would compact block %u in dir inode %llu\n" msgstr "" #: ../repair/dir.c:2688 ../repair/dir2.c:1808 #, c-format msgid "can't map block %u for directory inode %llu\n" msgstr "" #: ../repair/dir.c:2699 #, c-format msgid "" "can't read file block %u (fsbno %llu, daddr %lld) for directory inode %llu\n" msgstr "" #: ../repair/dir.c:2713 ../repair/dir.c:2975 #, c-format msgid "bad directory leaf magic # %#x for dir ino %llu\n" msgstr "" #: ../repair/dir.c:2752 #, c-format msgid "" "bad sibling back pointer for directory block %u in directory inode %llu\n" msgstr "" #: ../repair/dir.c:2784 ../repair/dir2.c:1884 #, c-format msgid "bad hash path in directory %llu\n" msgstr "" #: ../repair/dir.c:2894 #, c-format msgid "out of range internal directory block numbers (inode %llu)\n" msgstr "" #: ../repair/dir.c:2900 #, c-format msgid "setting directory inode (%llu) size to %llu bytes, was %lld bytes\n" msgstr "" #: ../repair/dir.c:2955 #, c-format msgid "block 0 for directory inode %llu is missing\n" msgstr "" #: ../repair/dir.c:2962 #, c-format msgid "can't read block 0 for directory inode %llu\n" msgstr "" #: ../repair/dir.c:2999 #, c-format msgid "clearing forw/back pointers for directory inode %llu\n" msgstr "" #: ../repair/dir.c:3005 #, c-format msgid "would clear forw/back pointers for directory inode %llu\n" msgstr "" #: ../repair/dir.c:3075 ../repair/dir2.c:2090 #, c-format msgid "no . entry for directory %llu\n" msgstr "" #: ../repair/dir.c:3085 ../repair/dir2.c:2100 #, c-format msgid "no .. entry for directory %llu\n" msgstr "" #: ../repair/dir.c:3087 ../repair/dir2.c:2102 #, c-format msgid "no .. entry for root directory %llu\n" msgstr "" #: ../repair/dir2.c:54 #, c-format msgid "malloc failed (%u bytes) dir2_add_badlist:ino %llu\n" msgstr "" #: ../repair/dir2.c:93 ../repair/dir2.c:187 ../repair/dir2.c:223 msgid "couldn't malloc dir2 buffer list\n" msgstr "" #: ../repair/dir2.c:105 msgid "couldn't malloc dir2 buffer header\n" msgstr "" #: ../repair/dir2.c:122 msgid "couldn't malloc dir2 buffer data\n" msgstr "" #: ../repair/dir2.c:276 ../repair/dir2.c:633 ../repair/dir2.c:1689 #: ../repair/phase6.c:2100 ../repair/phase6.c:2175 ../repair/phase6.c:2220 #: ../repair/phase6.c:2319 ../repair/phase6.c:2451 ../repair/phase6.c:2465 #: ../repair/phase6.c:2710 #, c-format msgid "can't read block %u for directory inode %llu\n" msgstr "" #: ../repair/dir2.c:287 #, c-format msgid "found non-root LEAFN node in inode %llu bno = %u\n" msgstr "" #: ../repair/dir2.c:292 #, c-format msgid "LEAFN node level is %d inode %llu bno = %u\n" msgstr "" #: ../repair/dir2.c:303 #, c-format msgid "bad dir magic number 0x%x in inode %llu bno = %u\n" msgstr "" #: ../repair/dir2.c:380 #, c-format msgid "release_dir2_cursor_int got unexpected non-null bp, dabno = %u\n" msgstr "" #: ../repair/dir2.c:443 #, c-format msgid "directory block used/count inconsistency - %d / %hu\n" msgstr "" #: ../repair/dir2.c:465 #, c-format msgid "bad directory block in inode %llu\n" msgstr "" #: ../repair/dir2.c:486 #, c-format msgid "" "correcting bad hashval in non-leaf dir block\n" "\tin (level %d) in inode %llu.\n" msgstr "" #: ../repair/dir2.c:493 #, c-format msgid "" "would correct bad hashval in non-leaf dir block\n" "\tin (level %d) in inode %llu.\n" msgstr "" #: ../repair/dir2.c:647 #, c-format msgid "bad magic number %x in block %u for directory inode %llu\n" msgstr "" #: ../repair/dir2.c:655 #, c-format msgid "bad back pointer in block %u for directory inode %llu\n" msgstr "" #: ../repair/dir2.c:662 #, c-format msgid "entry count %d too large in block %u for directory inode %llu\n" msgstr "" #: ../repair/dir2.c:669 #, c-format msgid "bad level %d in block %u for directory inode %llu\n" msgstr "" #: ../repair/dir2.c:713 #, c-format msgid "" "correcting bad hashval in interior dir block\n" "\tin (level %d) in inode %llu.\n" msgstr "" #: ../repair/dir2.c:720 #, c-format msgid "" "would correct bad hashval in interior dir block\n" "\tin (level %d) in inode %llu.\n" msgstr "" #: ../repair/dir2.c:754 msgid "couldn't malloc dir2 shortform copy\n" msgstr "" #: ../repair/dir2.c:894 msgid "current" msgstr "" #: ../repair/dir2.c:897 ../repair/dir2.c:1420 msgid "invalid" msgstr "" #: ../repair/dir2.c:900 ../repair/dir2.c:1423 msgid "realtime bitmap" msgstr "" #: ../repair/dir2.c:903 ../repair/dir2.c:1426 msgid "realtime summary" msgstr "" #: ../repair/dir2.c:906 ../repair/dir2.c:1429 msgid "user quota" msgstr "" #: ../repair/dir2.c:909 ../repair/dir2.c:1432 msgid "group quota" msgstr "" #: ../repair/dir2.c:943 ../repair/dir2.c:1469 msgid "non-existent" msgstr "" #: ../repair/dir2.c:947 #, c-format msgid "entry \"%*.*s\" in shortform directory %llu references %s inode %llu\n" msgstr "" #: ../repair/dir2.c:979 #, c-format msgid "zero length entry in shortform dir %llu" msgstr "" #: ../repair/dir2.c:983 #, c-format msgid ", junking %d entries\n" msgstr "" #: ../repair/dir2.c:986 #, c-format msgid ", would junk %d entries\n" msgstr "" #: ../repair/dir2.c:1060 #, c-format msgid "entry contains offset out of order in shortform dir %llu\n" msgstr "" #: ../repair/dir2.c:1164 #, c-format msgid "would have corrected i8 count in directory %llu from %d to %d\n" msgstr "" #: ../repair/dir2.c:1168 #, c-format msgid "corrected i8 count in directory %llu, was %d, now %d\n" msgstr "" #: ../repair/dir2.c:1205 #, c-format msgid "directory %llu offsets too high\n" msgstr "" #: ../repair/dir2.c:1210 #, c-format msgid "would have corrected entry offsets in directory %llu\n" msgstr "" #: ../repair/dir2.c:1214 #, c-format msgid "corrected entry offsets in directory %llu\n" msgstr "" #: ../repair/dir2.c:1269 #, c-format msgid "bad .. entry in directory inode %llu, points to self, " msgstr "" #: ../repair/dir2.c:1381 #, c-format msgid "corrupt block %u in directory inode %llu\n" msgstr "" #: ../repair/dir2.c:1384 msgid "\twill junk block\n" msgstr "" #: ../repair/dir2.c:1386 msgid "\twould junk block\n" msgstr "" #: ../repair/dir2.c:1472 #, c-format msgid "" "entry \"%*.*s\" at block %u offset %d in directory inode %llu references %s " "inode %llu\n" msgstr "" #: ../repair/dir2.c:1484 #, c-format msgid "entry at block %u offset %d in directory inode %llu has 0 namelength\n" msgstr "" #: ../repair/dir2.c:1496 #, c-format msgid "\tclearing inode number in entry at offset %d...\n" msgstr "" #: ../repair/dir2.c:1502 #, c-format msgid "\twould clear inode number in entry at offset %d...\n" msgstr "" #: ../repair/dir2.c:1515 #, c-format msgid "" "entry at block %u offset %d in directory inode %llu has illegal name \"%*.*s" "\": " msgstr "" #: ../repair/dir2.c:1546 #, c-format msgid "bad .. entry in directory inode %llu, points to self: " msgstr "" #: ../repair/dir2.c:1557 #, c-format msgid "bad .. entry in root directory inode %llu, was %llu: " msgstr "" #: ../repair/dir2.c:1562 ../repair/dir2.c:1594 ../repair/phase2.c:178 #: ../repair/phase2.c:187 ../repair/phase2.c:196 msgid "correcting\n" msgstr "" #: ../repair/dir2.c:1566 ../repair/dir2.c:1598 ../repair/phase2.c:180 #: ../repair/phase2.c:189 ../repair/phase2.c:198 msgid "would correct\n" msgstr "" #: ../repair/dir2.c:1577 #, c-format msgid "multiple .. entries in directory inode %llu: " msgstr "" #: ../repair/dir2.c:1590 #, c-format msgid "bad . entry in directory inode %llu, was %llu: " msgstr "" #: ../repair/dir2.c:1602 #, c-format msgid "multiple . entries in directory inode %llu: " msgstr "" #: ../repair/dir2.c:1612 #, c-format msgid "entry \"%*.*s\" in directory inode %llu points to self: " msgstr "" #: ../repair/dir2.c:1624 msgid "clearing entry\n" msgstr "" #: ../repair/dir2.c:1638 #, c-format msgid "bad bestfree table in block %u in directory inode %llu: " msgstr "" #: ../repair/dir2.c:1642 msgid "repairing table\n" msgstr "" #: ../repair/dir2.c:1646 msgid "would repair table\n" msgstr "" #: ../repair/dir2.c:1682 #, c-format msgid "block %u for directory inode %llu is missing\n" msgstr "" #: ../repair/dir2.c:1698 #, c-format msgid "bad directory block magic # %#x in block %u for directory inode %llu\n" msgstr "" #: ../repair/dir2.c:1743 #, c-format msgid "bad entry count in block %u of directory inode %llu\n" msgstr "" #: ../repair/dir2.c:1753 #, c-format msgid "bad hash ordering in block %u of directory inode %llu\n" msgstr "" #: ../repair/dir2.c:1762 #, c-format msgid "bad stale count in block %u of directory inode %llu\n" msgstr "" #: ../repair/dir2.c:1817 #, c-format msgid "can't read file block %u for directory inode %llu\n" msgstr "" #: ../repair/dir2.c:1828 #, c-format msgid "bad directory leaf magic # %#x for directory inode %llu block %u\n" msgstr "" #: ../repair/dir2.c:1858 #, c-format msgid "bad sibling back pointer for block %u in directory inode %llu\n" msgstr "" #: ../repair/dir2.c:1987 #, c-format msgid "block %llu for directory inode %llu is missing\n" msgstr "" #: ../repair/dir2.c:1995 #, c-format msgid "can't read block %llu for directory inode %llu\n" msgstr "" #: ../repair/dir2.c:2003 #, c-format msgid "" "bad directory block magic # %#x in block %llu for directory inode %llu\n" msgstr "" #: ../repair/dir2.c:2083 #, c-format msgid "bad size/format for directory %llu\n" msgstr "" #: ../repair/dir_stack.c:91 msgid "couldn't malloc dir stack element, try more swap\n" msgstr "" #: ../repair/incore.c:64 msgid "couldn't allocate block map pointers\n" msgstr "" #: ../repair/incore.c:73 #, c-format msgid "couldn't allocate block map, size = %d\n" msgstr "" #: ../repair/incore.c:90 #, c-format msgid "couldn't allocate realtime block map, size = %llu\n" msgstr "" #: ../repair/incore_ext.c:112 ../repair/incore_ext.c:657 msgid "couldn't allocate new extent descriptors.\n" msgstr "" #: ../repair/incore_ext.c:241 msgid "duplicate bno extent range\n" msgstr "" #: ../repair/incore_ext.c:357 msgid ": duplicate bno extent range\n" msgstr "" #: ../repair/incore_ext.c:519 ../repair/incore_ext.c:570 #: ../repair/incore_ext.c:770 ../repair/incore_ext.c:822 msgid "duplicate extent range\n" msgstr "" #: ../repair/incore_ext.c:871 msgid "couldn't malloc dup extent tree descriptor table\n" msgstr "" #: ../repair/incore_ext.c:876 msgid "couldn't malloc free by-bno extent tree descriptor table\n" msgstr "" #: ../repair/incore_ext.c:881 msgid "couldn't malloc free by-bcnt extent tree descriptor table\n" msgstr "" #: ../repair/incore_ext.c:887 msgid "couldn't malloc dup extent tree descriptor\n" msgstr "" #: ../repair/incore_ext.c:891 msgid "couldn't malloc bno extent tree descriptor\n" msgstr "" #: ../repair/incore_ext.c:895 msgid "couldn't malloc bcnt extent tree descriptor\n" msgstr "" #: ../repair/incore_ext.c:905 msgid "couldn't malloc dup rt extent tree descriptor\n" msgstr "" #: ../repair/incore_ino.c:77 msgid "inode map malloc failed\n" msgstr "" #: ../repair/incore_ino.c:190 msgid "add_aginode_uncertain - duplicate inode range\n" msgstr "" #: ../repair/incore_ino.c:292 msgid "add_inode - duplicate inode range\n" msgstr "" #: ../repair/incore_ino.c:404 #, c-format msgid "good inode list is --\n" msgstr "" #: ../repair/incore_ino.c:407 #, c-format msgid "uncertain inode list is --\n" msgstr "" #: ../repair/incore_ino.c:412 #, c-format msgid "agno %d -- no inodes\n" msgstr "" #: ../repair/incore_ino.c:416 #, c-format msgid "agno %d\n" msgstr "" #: ../repair/incore_ino.c:420 #, c-format msgid "\tptr = %lx, start = 0x%x, free = 0x%llx, confirmed = 0x%llx\n" msgstr "" #: ../repair/incore_ino.c:464 msgid "couldn't malloc parent list table\n" msgstr "" #: ../repair/incore_ino.c:470 ../repair/incore_ino.c:516 msgid "couldn't memalign pentries table\n" msgstr "" #: ../repair/incore_ino.c:663 msgid "couldn't malloc ino rec backptrs.\n" msgstr "" #: ../repair/incore_ino.c:689 msgid "could not malloc back pointer table\n" msgstr "" #: ../repair/incore_ino.c:779 msgid "couldn't malloc inode tree descriptor table\n" msgstr "" #: ../repair/incore_ino.c:783 msgid "couldn't malloc uncertain ino tree descriptor table\n" msgstr "" #: ../repair/incore_ino.c:788 msgid "couldn't malloc inode tree descriptor\n" msgstr "" #: ../repair/incore_ino.c:792 msgid "couldn't malloc uncertain ino tree descriptor\n" msgstr "" #: ../repair/incore_ino.c:803 msgid "couldn't malloc uncertain inode cache area\n" msgstr "" #: ../repair/init.c:53 #, c-format msgid "you should never get this message - %s" msgstr "" #: ../repair/init.c:63 msgid "couldn't initialize XFS library\n" msgstr "" #: ../repair/io.c:33 #, c-format msgid "couldn't open filesystem \"%s\"\n" msgstr "" #: ../repair/phase1.c:28 msgid "Sorry, could not find valid secondary superblock\n" msgstr "" #: ../repair/phase1.c:29 msgid "Exiting now.\n" msgstr "" #: ../repair/phase1.c:40 #, c-format msgid "could not allocate ag header buffer (%d bytes)\n" msgstr "" #: ../repair/phase1.c:60 msgid "Phase 1 - find and verify superblock...\n" msgstr "" #: ../repair/phase1.c:77 msgid "error reading primary superblock\n" msgstr "" #: ../repair/phase1.c:83 #, c-format msgid "bad primary superblock - %s !!!\n" msgstr "" #: ../repair/phase1.c:90 #, c-format msgid "couldn't verify primary superblock - %s !!!\n" msgstr "" #: ../repair/phase1.c:99 msgid "writing modified primary superblock\n" msgstr "" #: ../repair/phase1.c:102 msgid "would write modified primary superblock\n" msgstr "" #: ../repair/phase2.c:54 #, c-format msgid "" "zero_log: cannot find log head/tail (xlog_find_tail=%d), zeroing it anyway\n" msgstr "" #: ../repair/phase2.c:59 #, c-format msgid "zero_log: head block %lld tail block %lld\n" msgstr "" #: ../repair/phase2.c:65 msgid "" "ALERT: The filesystem has valuable metadata changes in a log which is being\n" "destroyed because the -L option was used.\n" msgstr "" #: ../repair/phase2.c:69 msgid "" "ERROR: The filesystem has valuable metadata changes in a log which needs to\n" "be replayed. Mount the filesystem to replay the log, and unmount it before\n" "re-running xfs_repair. If you are unable to mount the filesystem, then use\n" "the -L option to destroy the log and attempt a repair.\n" "Note that destroying the log may cause corruption -- please attempt a mount\n" "of the filesystem before doing this.\n" msgstr "" #: ../repair/phase2.c:111 msgid "" "This filesystem has an external log. Specify log device with the -l " "option.\n" msgstr "" #: ../repair/phase2.c:114 #, c-format msgid "Phase 2 - using external log on %s\n" msgstr "" #: ../repair/phase2.c:116 msgid "Phase 2 - using internal log\n" msgstr "" #: ../repair/phase2.c:120 msgid " - zero log...\n" msgstr "" #: ../repair/phase2.c:124 msgid " - scan filesystem freespace and inode maps...\n" msgstr "" #: ../repair/phase2.c:147 msgid "root inode chunk not found\n" msgstr "" #: ../repair/phase2.c:169 msgid " - found root inode chunk\n" msgstr "" #: ../repair/phase2.c:175 msgid "root inode marked free, " msgstr "" #: ../repair/phase2.c:184 msgid "realtime bitmap inode marked free, " msgstr "" #: ../repair/phase2.c:193 msgid "realtime summary inode marked free, " msgstr "" #: ../repair/phase3.c:113 #, c-format msgid "cannot read agi block %lld for ag %u\n" msgstr "" #: ../repair/phase3.c:136 #, c-format msgid "error following ag %d unlinked list\n" msgstr "" #: ../repair/phase3.c:151 msgid "Phase 3 - for each AG...\n" msgstr "" #: ../repair/phase3.c:153 msgid " - scan and clear agi unlinked lists...\n" msgstr "" #: ../repair/phase3.c:155 msgid " - scan (but don't clear) agi unlinked lists...\n" msgstr "" #: ../repair/phase3.c:171 msgid " - process known inodes and perform inode discovery...\n" msgstr "" #: ../repair/phase3.c:174 ../repair/phase4.c:1315 #, c-format msgid " - agno = %d\n" msgstr "" #: ../repair/phase3.c:185 msgid " - process newly discovered inodes...\n" msgstr "" #: ../repair/phase4.c:128 ../repair/phase4.c:594 #, c-format msgid "couldn't read %s inode %llu\n" msgstr "" #: ../repair/phase4.c:153 ../repair/phase4.c:336 ../repair/phase4.c:619 #: ../repair/phase4.c:817 #, c-format msgid " - clearing existing \"%s\" inode\n" msgstr "" #: ../repair/phase4.c:185 ../repair/phase4.c:652 #, c-format msgid " - marking entry \"%s\" to be deleted\n" msgstr "" #: ../repair/phase4.c:213 #, c-format msgid "couldn't map first leaf block of directory inode %llu\n" msgstr "" #: ../repair/phase4.c:242 #, c-format msgid "bad magic # (0x%x) for directory leaf block (bno %u fsbno %llu)\n" msgstr "" #: ../repair/phase4.c:379 ../repair/phase4.c:860 #, c-format msgid "could not read %s inode %llu\n" msgstr "" #: ../repair/phase4.c:430 ../repair/phase4.c:912 #, c-format msgid " - deleting existing \"%s\" entry\n" msgstr "" #: ../repair/phase4.c:684 #, c-format msgid "malloc failed (%u bytes) in longform2_delete_orphanage, ino %llu\n" msgstr "" #: ../repair/phase4.c:728 #, c-format msgid "bad magic # (0x%x) for directory data block (bno %u fsbno %llu)\n" msgstr "" #: ../repair/phase4.c:988 #, c-format msgid "could not read buffer for root inode %llu (daddr %lld, size %d)\n" msgstr "" #: ../repair/phase4.c:1034 #, c-format msgid "unknown version #%d in root inode\n" msgstr "" #: ../repair/phase4.c:1141 msgid "Phase 4 - check for duplicate blocks...\n" msgstr "" #: ../repair/phase4.c:1142 msgid " - setting up duplicate extent list...\n" msgstr "" #: ../repair/phase4.c:1154 msgid "root inode would be lost\n" msgstr "" #: ../repair/phase4.c:1156 msgid "root inode lost\n" msgstr "" #: ../repair/phase4.c:1164 msgid " - clear lost+found (if it exists) ...\n" msgstr "" #: ../repair/phase4.c:1185 #, c-format msgid "unknown block state, ag %d, block %d\n" msgstr "" #: ../repair/phase4.c:1241 #, c-format msgid "unknown rt extent state, extent %llu\n" msgstr "" #: ../repair/phase4.c:1304 msgid " - check for inodes claiming duplicate blocks...\n" msgstr "" #: ../repair/phase5.c:216 msgid "could not set up btree block array\n" msgstr "" #: ../repair/phase5.c:228 msgid "error - not enough free space in filesystem\n" msgstr "" #: ../repair/phase5.c:451 #, c-format msgid "can't rebuild fs trees -- not enough free space on ag %u\n" msgstr "" #: ../repair/phase5.c:475 #, c-format msgid "ag %u - not enough free space to build freespace btrees\n" msgstr "" #: ../repair/phase5.c:510 #, c-format msgid "not enough free blocks left to describe all free blocks in AG %u\n" msgstr "" #: ../repair/phase5.c:1320 #, c-format msgid "lost %d blocks in ag %u\n" msgstr "" #: ../repair/phase5.c:1323 #, c-format msgid "thought we were going to lose %d blocks in ag %u, actually lost %d\n" msgstr "" #: ../repair/phase5.c:1371 ../repair/xfs_repair.c:585 msgid "couldn't get superblock\n" msgstr "" #: ../repair/phase5.c:1424 msgid "Phase 5 - rebuild AG headers and trees...\n" msgstr "" #: ../repair/phase5.c:1473 #, c-format msgid "unable to rebuild AG %u. Not enough free space in on-disk AG.\n" msgstr "" #: ../repair/phase5.c:1513 #, c-format msgid "unable to rebuild AG %u. No free space.\n" msgstr "" #: ../repair/phase5.c:1540 #, c-format msgid "lost %d blocks in agno %d, sorry.\n" msgstr "" #: ../repair/phase5.c:1599 msgid " - generate realtime summary info and bitmap...\n" msgstr "" #: ../repair/phase5.c:1605 msgid " - reset superblock...\n" msgstr "" #: ../repair/phase6.c:89 #, c-format msgid "malloc failed in dir_hash_add (%u bytes)\n" msgstr "" #: ../repair/phase6.c:125 msgid "ok" msgstr "" #: ../repair/phase6.c:126 msgid "duplicate leaf" msgstr "" #: ../repair/phase6.c:127 msgid "hash value mismatch" msgstr "" #: ../repair/phase6.c:128 msgid "no data entry" msgstr "" #: ../repair/phase6.c:129 msgid "no leaf entry" msgstr "" #: ../repair/phase6.c:130 msgid "bad stale count" msgstr "" #: ../repair/phase6.c:138 #, c-format msgid "bad hash table for directory inode %llu (%s): " msgstr "" #: ../repair/phase6.c:141 msgid "rebuilding\n" msgstr "" #: ../repair/phase6.c:143 msgid "would rebuild\n" msgstr "" #: ../repair/phase6.c:177 msgid "calloc failed in dir_hash_init\n" msgstr "" #: ../repair/phase6.c:309 msgid "ran out of disk space!\n" msgstr "" #: ../repair/phase6.c:311 #, c-format msgid "xfs_trans_reserve returned %d\n" msgstr "" #: ../repair/phase6.c:340 ../repair/phase6.c:433 #, c-format msgid "couldn't iget realtime bitmap inode -- error - %d\n" msgstr "" #: ../repair/phase6.c:390 #, c-format msgid "couldn't allocate realtime bitmap, error = %d\n" msgstr "" #: ../repair/phase6.c:403 #, c-format msgid "allocation of the realtime bitmap failed, error = %d\n" msgstr "" #: ../repair/phase6.c:446 #, c-format msgid "couldn't map realtime bitmap block %llu, error = %d\n" msgstr "" #: ../repair/phase6.c:459 #, c-format msgid "can't access block %llu (fsbno %llu) of realtime bitmap inode %llu\n" msgstr "" #: ../repair/phase6.c:503 ../repair/phase6.c:575 #, c-format msgid "couldn't iget realtime summary inode -- error - %d\n" msgstr "" #: ../repair/phase6.c:516 #, c-format msgid "couldn't map realtime summary inode block %llu, error = %d\n" msgstr "" #: ../repair/phase6.c:529 #, c-format msgid "can't access block %llu (fsbno %llu) of realtime summary inode %llu\n" msgstr "" #: ../repair/phase6.c:631 #, c-format msgid "couldn't allocate realtime summary inode, error = %d\n" msgstr "" #: ../repair/phase6.c:644 #, c-format msgid "allocation of the realtime summary ino failed, error = %d\n" msgstr "" #: ../repair/phase6.c:671 #, c-format msgid "could not iget root inode -- error - %d\n" msgstr "" #: ../repair/phase6.c:739 #, c-format msgid "%d - couldn't iget root inode to make %s\n" msgstr "" #: ../repair/phase6.c:746 #, c-format msgid "%s inode allocation failed %d\n" msgstr "" #: ../repair/phase6.c:766 #, c-format msgid "can't make %s, createname error %d, will try later\n" msgstr "" #: ../repair/phase6.c:784 #, c-format msgid "%s directory creation failed -- bmapf error %d\n" msgstr "" #: ../repair/phase6.c:821 #, c-format msgid "%d - couldn't iget orphanage inode\n" msgstr "" #: ../repair/phase6.c:826 #, c-format msgid "%d - couldn't iget disconnected inode\n" msgstr "" #: ../repair/phase6.c:840 ../repair/phase6.c:879 ../repair/phase6.c:930 #, c-format msgid "space reservation failed (%d), filesystem may be out of space\n" msgstr "" #: ../repair/phase6.c:851 ../repair/phase6.c:891 ../repair/phase6.c:940 #, c-format msgid "name create failed in %s (%d), filesystem may be out of space\n" msgstr "" #: ../repair/phase6.c:860 #, c-format msgid "creation of .. entry failed (%d), filesystem may be out of space\n" msgstr "" #: ../repair/phase6.c:868 #, c-format msgid "bmap finish failed (err - %d), filesystem may be out of space\n" msgstr "" #: ../repair/phase6.c:906 #, c-format msgid "name replace op failed (%d), filesystem may be out of space\n" msgstr "" #: ../repair/phase6.c:913 ../repair/phase6.c:949 #, c-format msgid "bmap finish failed (%d), filesystem may be out of space\n" msgstr "" #: ../repair/phase6.c:990 ../repair/phase6.c:1147 ../repair/phase6.c:1539 msgid "dir" msgstr "" #: ../repair/phase6.c:999 ../repair/phase6.c:1003 #, c-format msgid "can't map block %d in %s inode %llu, xfs_bmapi returns %d, nmap = %d\n" msgstr "" #: ../repair/phase6.c:1011 ../repair/phase6.c:1014 ../repair/phase6.c:1618 #: ../repair/phase6.c:1622 #, c-format msgid "block %d in %s ino %llu doesn't exist\n" msgstr "" #: ../repair/phase6.c:1069 ../repair/phase6.c:1073 #, c-format msgid "can't map block %d in %s ino %llu, xfs_bmapi returns %d, nmap = %d\n" msgstr "" #: ../repair/phase6.c:1081 ../repair/phase6.c:1085 #, c-format msgid "block %d in %s inode %llu doesn't exist\n" msgstr "" #: ../repair/phase6.c:1165 #, c-format msgid "can't read directory inode %llu (leaf) block %u (fsbno %llu)\n" msgstr "" #: ../repair/phase6.c:1207 #, c-format msgid "can't map block %d in directory %llu, xfs_bmapi returns %d, nmap = %d\n" msgstr "" #: ../repair/phase6.c:1212 #, c-format msgid "%s ino %llu block %d doesn't exist\n" msgstr "" #: ../repair/phase6.c:1267 #, c-format msgid "" "couldn't remove bogus entry \"%s\" in\n" "\tdirectory inode %llu, errno = %d\n" msgstr "" #: ../repair/phase6.c:1403 #, c-format msgid "entry \"%s\" in dir inode %llu points to non-existent inode, " msgstr "" #: ../repair/phase6.c:1409 ../repair/phase6.c:1970 msgid "marking entry to be junked\n" msgstr "" #: ../repair/phase6.c:1411 ../repair/phase6.c:1972 ../repair/phase6.c:2889 #: ../repair/phase6.c:3287 msgid "would junk entry\n" msgstr "" #: ../repair/phase6.c:1431 #, c-format msgid "entry \"%s\" in dir inode %llu points to free inode %llu" msgstr "" #: ../repair/phase6.c:1438 ../repair/phase6.c:2002 msgid ", marking entry to be junked\n" msgstr "" #: ../repair/phase6.c:1445 ../repair/phase6.c:2008 msgid ", would junk entry\n" msgstr "" #: ../repair/phase6.c:1473 #, c-format msgid "" "entry \"%s\" in dir %llu points to an already connected dir inode %llu,\n" msgstr "" #: ../repair/phase6.c:1484 #, c-format msgid "" "entry \"%s\" in dir ino %llu not consistent with .. value (%llu) in ino %" "llu,\n" msgstr "" #: ../repair/phase6.c:1497 ../repair/phase6.c:2060 #, c-format msgid "\twill clear entry \"%s\"\n" msgstr "" #: ../repair/phase6.c:1500 ../repair/phase6.c:2063 #, c-format msgid "\twould clear entry \"%s\"\n" msgstr "" #: ../repair/phase6.c:1544 #, c-format msgid "cannot map block 0 of directory inode %llu\n" msgstr "" #: ../repair/phase6.c:1570 #, c-format msgid "bad magic # (0x%x) for dir ino %llu leaf block (bno %u fsbno %llu)\n" msgstr "" #: ../repair/phase6.c:1606 ../repair/phase6.c:1610 #, c-format msgid "can't map leaf block %d in dir %llu, xfs_bmapi returns %d, nmap = %d\n" msgstr "" #: ../repair/phase6.c:1672 #, c-format msgid "shrink_inode failed inode %llu block %u\n" msgstr "" #: ../repair/phase6.c:1753 #, c-format msgid "realloc failed in longform_dir2_entry_check_data (%u bytes)\n" msgstr "" #: ../repair/phase6.c:1812 #, c-format msgid "empty data block %u in directory inode %llu: " msgstr "" #: ../repair/phase6.c:1815 #, c-format msgid "corrupt block %u in directory inode %llu: " msgstr "" #: ../repair/phase6.c:1819 msgid "junking block\n" msgstr "" #: ../repair/phase6.c:1822 msgid "would junk block\n" msgstr "" #: ../repair/phase6.c:1846 #, c-format msgid "bad directory block magic # %#x for directory inode %llu block %d: " msgstr "" #: ../repair/phase6.c:1850 #, c-format msgid "fixing magic # to %#x\n" msgstr "" #: ../repair/phase6.c:1854 #, c-format msgid "would fix magic # to %#x\n" msgstr "" #: ../repair/phase6.c:1875 #, c-format msgid "directory inode %llu block %u has consecutive free entries: " msgstr "" #: ../repair/phase6.c:1879 msgid "joining together\n" msgstr "" #: ../repair/phase6.c:1888 msgid "would join together\n" msgstr "" #: ../repair/phase6.c:1964 #, c-format msgid "entry \"%s\" in directory inode %llu points to non-existent inode, " msgstr "" #: ../repair/phase6.c:1993 #, c-format msgid "entry \"%s\" in directory inode %llu points to free inode %llu" msgstr "" #: ../repair/phase6.c:2032 #, c-format msgid "" "entry \"%s\" in dir %llu points to an already connected directory inode %" "llu,\n" msgstr "" #: ../repair/phase6.c:2046 #, c-format msgid "" "entry \"%s\" in dir inode %llu inconsistent with .. value (%llu) in ino %" "llu,\n" msgstr "" #: ../repair/phase6.c:2118 ../repair/phase6.c:2198 #, c-format msgid "leaf block %u for directory inode %llu bad header\n" msgstr "" #: ../repair/phase6.c:2136 #, c-format msgid "leaf block %u for directory inode %llu bad tail\n" msgstr "" #: ../repair/phase6.c:2187 #, c-format msgid "unknown magic number %#x for block %u in directory inode %llu\n" msgstr "" #: ../repair/phase6.c:2234 #, c-format msgid "free block %u for directory inode %llu bad header\n" msgstr "" #: ../repair/phase6.c:2247 #, c-format msgid "free block %u entry %i for directory ino %llu bad\n" msgstr "" #: ../repair/phase6.c:2256 #, c-format msgid "free block %u for directory inode %llu bad nused\n" msgstr "" #: ../repair/phase6.c:2267 #, c-format msgid "missing freetab entry %u for directory inode %llu\n" msgstr "" #: ../repair/phase6.c:2362 #, c-format msgid "can't add btree block to directory inode %llu\n" msgstr "" #: ../repair/phase6.c:2395 #, c-format msgid "can't add free block to directory inode %llu\n" msgstr "" #: ../repair/phase6.c:2472 #, c-format msgid "malloc failed in longform_dir2_rebuild_data (%u bytes)\n" msgstr "" #: ../repair/phase6.c:2616 #, c-format msgid "rebuilding directory inode %llu\n" msgstr "" #: ../repair/phase6.c:2626 #, c-format msgid "can't get block %u for directory inode %llu\n" msgstr "" #: ../repair/phase6.c:2686 #, c-format msgid "malloc failed in longform_dir2_entry_check (%u bytes)\n" msgstr "" #: ../repair/phase6.c:2801 #, c-format msgid "shortform dir inode %llu has null data entries \n" msgstr "" #: ../repair/phase6.c:2887 #, c-format msgid "entry \"%s\" in shortform dir %llu references non-existent ino %llu\n" msgstr "" #: ../repair/phase6.c:2909 #, c-format msgid "entry \"%s\" in shortform dir inode %llu points to free inode %llu\n" msgstr "" #: ../repair/phase6.c:2915 ../repair/phase6.c:2994 ../repair/phase6.c:3314 #: ../repair/phase6.c:3390 #, c-format msgid "would junk entry \"%s\"\n" msgstr "" #: ../repair/phase6.c:2940 #, c-format msgid "entry \"%s\" in dir %llu references already connected dir ino %llu,\n" msgstr "" #: ../repair/phase6.c:2952 #, c-format msgid "" "entry \"%s\" in dir %llu not consistent with .. value (%llu) in dir ino %" "llu,\n" msgstr "" #: ../repair/phase6.c:3033 ../repair/phase6.c:3128 ../repair/phase6.c:3445 #, c-format msgid "setting size to %lld bytes to reflect junked entries\n" msgstr "" #: ../repair/phase6.c:3284 #, c-format msgid "" "entry \"%s\" in shortform directory %llu references non-existent inode %llu\n" msgstr "" #: ../repair/phase6.c:3306 #, c-format msgid "" "entry \"%s\" in shortform directory inode %llu points to free inode %llu\n" msgstr "" #: ../repair/phase6.c:3333 #, c-format msgid "" "entry \"%s\" in directory inode %llu references already connected inode %" "llu,\n" msgstr "" #: ../repair/phase6.c:3346 #, c-format msgid "" "entry \"%s\" in directory inode %llu not consistent with .. value (%llu) in " "inode %llu,\n" msgstr "" #: ../repair/phase6.c:3414 #, c-format msgid "would fix i8count in inode %llu\n" msgstr "" #: ../repair/phase6.c:3426 #, c-format msgid "fixing i8count in inode %llu\n" msgstr "" #: ../repair/phase6.c:3489 ../repair/phase6.c:3493 ../repair/phase7.c:116 #, c-format msgid "couldn't map inode %llu, err = %d\n" msgstr "" #: ../repair/phase6.c:3615 #, c-format msgid "re-entering %s into root directory\n" msgstr "" #: ../repair/phase6.c:3632 #, c-format msgid "can't make %s entry in root inode %llu, createname error %d\n" msgstr "" #: ../repair/phase6.c:3657 msgid "recreating root directory .. entry\n" msgstr "" #: ../repair/phase6.c:3680 #, c-format msgid "can't make \"..\" entry in root inode %llu, createname error %d\n" msgstr "" #: ../repair/phase6.c:3693 msgid "would recreate root directory .. entry\n" msgstr "" #: ../repair/phase6.c:3772 #, c-format msgid "would create missing \".\" entry in dir ino %llu\n" msgstr "" #: ../repair/phase6.c:3779 #, c-format msgid "creating missing \".\" entry in dir ino %llu\n" msgstr "" #: ../repair/phase6.c:3804 #, c-format msgid "can't make \".\" entry in dir ino %llu, createname error %d\n" msgstr "" #: ../repair/phase6.c:3885 msgid "Phase 6 - check inode connectivity...\n" msgstr "" #: ../repair/phase6.c:3904 msgid "reinitializing root directory\n" msgstr "" #: ../repair/phase6.c:3909 msgid "would reinitialize root directory\n" msgstr "" #: ../repair/phase6.c:3915 msgid "reinitializing realtime bitmap inode\n" msgstr "" #: ../repair/phase6.c:3919 msgid "would reinitialize realtime bitmap inode\n" msgstr "" #: ../repair/phase6.c:3925 msgid "reinitializing realtime summary inode\n" msgstr "" #: ../repair/phase6.c:3929 msgid "would reinitialize realtime summary inode\n" msgstr "" #: ../repair/phase6.c:3935 msgid " - resetting contents of realtime bitmap and summary inodes\n" msgstr "" #: ../repair/phase6.c:3938 ../repair/phase6.c:3943 msgid "Warning: realtime bitmap may be inconsistent\n" msgstr "" #: ../repair/phase6.c:3951 #, c-format msgid " - ensuring existence of %s directory\n" msgstr "" #: ../repair/phase6.c:3964 msgid " - traversing filesystem starting at / ... \n" msgstr "" #: ../repair/phase6.c:3969 msgid " - traversal finished ... \n" msgstr "" #: ../repair/phase6.c:3974 msgid " - root inode lost, cannot make new one in no modify mode ... \n" msgstr "" #: ../repair/phase6.c:3976 msgid " - skipping filesystem traversal from / ... \n" msgstr "" #: ../repair/phase6.c:3979 msgid " - traversing all unattached subtrees ... \n" msgstr "" #: ../repair/phase6.c:4030 msgid " - traversals finished ... \n" msgstr "" #: ../repair/phase6.c:4031 msgid " - moving disconnected inodes to lost+found ... \n" msgstr "" #: ../repair/phase6.c:4055 #, c-format msgid "disconnected dir inode %llu, " msgstr "" #: ../repair/phase6.c:4059 #, c-format msgid "disconnected inode %llu, " msgstr "" #: ../repair/phase6.c:4062 #, c-format msgid "moving to %s\n" msgstr "" #: ../repair/phase6.c:4068 #, c-format msgid "would move to %s\n" msgstr "" #: ../repair/phase7.c:40 #, c-format msgid "resetting inode %llu nlinks from %d to %d\n" msgstr "" #: ../repair/phase7.c:46 #, c-format msgid "" "nlinks %d will overflow v1 ino, ino %llu will be converted to version 2\n" msgstr "" #: ../repair/phase7.c:55 #, c-format msgid "would have reset inode %llu nlinks from %d to %d\n" msgstr "" #: ../repair/phase7.c:74 msgid "Phase 7 - verify and correct link counts...\n" msgstr "" #: ../repair/phase7.c:76 msgid "Phase 7 - verify link counts...\n" msgstr "" #: ../repair/phase7.c:120 #, c-format msgid "couldn't map inode %llu, err = %d, can't compare link counts\n" msgstr "" #: ../repair/rt.c:47 msgid "couldn't allocate memory for incore realtime bitmap.\n" msgstr "" #: ../repair/rt.c:51 msgid "couldn't allocate memory for incore realtime summary info.\n" msgstr "" #: ../repair/rt.c:151 #, c-format msgid "rt summary mismatch, size %d block %llu, file: %d, computed: %d\n" msgstr "" #: ../repair/rt.c:202 #, c-format msgid "can't find block %d for rtbitmap inode\n" msgstr "" #: ../repair/rt.c:210 #, c-format msgid "can't read block %d for rtbitmap inode\n" msgstr "" #: ../repair/rt.c:264 #, c-format msgid "block %d for rtsummary inode is missing\n" msgstr "" #: ../repair/rt.c:272 #, c-format msgid "can't read block %d for rtsummary inode\n" msgstr "" #: ../repair/sb.c:99 msgid "" "\n" "attempting to find secondary superblock...\n" msgstr "" #: ../repair/sb.c:104 msgid "error finding secondary superblock -- failed to memalign buffer\n" msgstr "" #: ../repair/sb.c:141 msgid "found candidate secondary superblock...\n" msgstr "" #: ../repair/sb.c:153 msgid "verified secondary superblock...\n" msgstr "" #: ../repair/sb.c:158 msgid "unable to verify superblock, continuing...\n" msgstr "" #: ../repair/sb.c:455 msgid "failed to malloc superblock buffer\n" msgstr "" #: ../repair/sb.c:461 msgid "couldn't seek to offset 0 in filesystem\n" msgstr "" #: ../repair/sb.c:468 msgid "primary superblock write failed!\n" msgstr "" #: ../repair/sb.c:485 #, c-format msgid "error reading superblock %u -- failed to malloc buffer\n" msgstr "" #: ../repair/sb.c:494 #, c-format msgid "error reading superblock %u -- seek to offset %lld failed\n" msgstr "" #: ../repair/sb.c:502 #, c-format msgid "superblock read failed, offset %lld, size %d, ag %u, rval %d\n" msgstr "" #: ../repair/sb.c:550 msgid "couldn't malloc geometry structure\n" msgstr "" #: ../repair/sb.c:695 msgid "calloc failed in verify_set_primary_sb\n" msgstr "" #: ../repair/sb.c:763 msgid "Only two AGs detected and they do not match - cannot proceed.\n" msgstr "" #: ../repair/sb.c:775 msgid "Only one AG detected - cannot proceed.\n" msgstr "" #: ../repair/sb.c:787 msgid "Not enough matching superblocks - cannot proceed.\n" msgstr "" #: ../repair/sb.c:802 msgid "could not read superblock\n" msgstr "" #: ../repair/scan.c:67 ../repair/scan.c:112 #, c-format msgid "can't read btree block %d/%d\n" msgstr "" #: ../repair/scan.c:171 #, c-format msgid "bad magic # %#x in inode %llu (%s fork) bmbt block %llu\n" msgstr "" #: ../repair/scan.c:178 #, c-format msgid "expected level %d got %d in inode %llu, (%s fork) bmbt block %llu\n" msgstr "" #: ../repair/scan.c:198 #, c-format msgid "" "bad fwd (right) sibling pointer (saw %llu parent block says %llu)\n" "\tin inode %llu (%s fork) bmap btree block %llu\n" msgstr "" #: ../repair/scan.c:208 #, c-format msgid "" "bad back (left) sibling pointer (saw %llu parent block says %llu)\n" "\tin inode %llu (%s fork) bmap btree block %llu\n" msgstr "" #: ../repair/scan.c:224 #, c-format msgid "" "bad back (left) sibling pointer (saw %llu should be NULL (0))\n" "\tin inode %llu (%s fork) bmap btree block %llu\n" msgstr "" #: ../repair/scan.c:260 ../repair/scan.c:268 #, c-format msgid "inode 0x%llx bmap block 0x%llx claimed, state is %d\n" msgstr "" #: ../repair/scan.c:284 #, c-format msgid "bad state %d, inode 0x%llx bmap block 0x%llx\n" msgstr "" #: ../repair/scan.c:310 ../repair/scan.c:365 #, c-format msgid "inode 0x%llx bad # of bmap records (%u, min - %u, max - %u)\n" msgstr "" #: ../repair/scan.c:344 #, c-format msgid "" "out-of-order bmap key (file offset) in inode %llu, %s fork, fsbno %llu\n" msgstr "" #: ../repair/scan.c:413 #, c-format msgid "" "correcting bt key (was %llu, now %llu) in inode %llu\n" "\t\t%s fork, btree block %llu\n" msgstr "" #: ../repair/scan.c:425 #, c-format msgid "" "bad btree key (is %llu, should be %llu) in inode %llu\n" "\t\t%s fork, btree block %llu\n" msgstr "" #: ../repair/scan.c:443 #, c-format msgid "" "bad fwd (right) sibling pointer (saw %llu should be NULLDFSBNO)\n" "\tin inode %llu (%s fork) bmap btree block %llu\n" msgstr "" #: ../repair/scan.c:485 #, c-format msgid "bad magic # %#x in btbno block %d/%d\n" msgstr "" #: ../repair/scan.c:492 #, c-format msgid "expected level %d got %d in btbno block %d/%d\n" msgstr "" #: ../repair/scan.c:512 #, c-format msgid "" "bno freespace btree block claimed (state %d), agno %d, bno %d, suspect %d\n" msgstr "" #: ../repair/scan.c:561 #, c-format msgid "block (%d,%d) multiply claimed by bno space tree, state - %d\n" msgstr "" #: ../repair/scan.c:641 #, c-format msgid "bad magic # %#x in btcnt block %d/%d\n" msgstr "" #: ../repair/scan.c:648 #, c-format msgid "expected level %d got %d in btcnt block %d/%d\n" msgstr "" #: ../repair/scan.c:668 #, c-format msgid "" "bcnt freespace btree block claimed (state %d), agno %d, bno %d, suspect %d\n" msgstr "" #: ../repair/scan.c:726 #, c-format msgid "block (%d,%d) already used, state %d\n" msgstr "" #: ../repair/scan.c:818 #, c-format msgid "bad magic # %#x in inobt block %d/%d\n" msgstr "" #: ../repair/scan.c:826 #, c-format msgid "expected level %d got %d in inobt block %d/%d\n" msgstr "" #: ../repair/scan.c:850 #, c-format msgid "inode btree block claimed (state %d), agno %d, bno %d, suspect %d\n" msgstr "" #: ../repair/scan.c:875 #, c-format msgid "dubious inode btree block header %d/%d\n" msgstr "" #: ../repair/scan.c:913 #, c-format msgid "badly aligned inode rec (starting inode = %llu)\n" msgstr "" #: ../repair/scan.c:929 #, c-format msgid "bad starting inode # (%llu (0x%x 0x%x)) in ino rec, skipping rec\n" msgstr "" #: ../repair/scan.c:938 #, c-format msgid "bad ending inode # (%llu (0x%x 0x%x)) in ino rec, skipping rec\n" msgstr "" #: ../repair/scan.c:967 #, c-format msgid "" "inode chunk claims used block, inobt block - agno %d, bno %d, inopb %d\n" msgstr "" #: ../repair/scan.c:992 #, c-format msgid "inode rec for ino %llu (%d/%d) overlaps existing rec (start %d/%d)\n" msgstr "" #: ../repair/scan.c:1048 #, c-format msgid "ir_freecount/free mismatch, inode chunk %d/%d, freecount %d nfree %d\n" msgstr "" #: ../repair/scan.c:1120 #, c-format msgid "can't read agfl block for ag %d\n" msgstr "" #: ../repair/scan.c:1134 #, c-format msgid "bad agbno %u in agfl, agno %d\n" msgstr "" #: ../repair/scan.c:1143 #, c-format msgid "freeblk count %d != flcount %d in ag %d\n" msgstr "" #: ../repair/scan.c:1175 #, c-format msgid "can't get root superblock for ag %d\n" msgstr "" #: ../repair/scan.c:1181 msgid "can't allocate memory for superblock\n" msgstr "" #: ../repair/scan.c:1191 #, c-format msgid "can't read agf block for ag %d\n" msgstr "" #: ../repair/scan.c:1202 #, c-format msgid "can't read agi block for ag %d\n" msgstr "" #: ../repair/scan.c:1226 #, c-format msgid "reset bad sb for ag %d\n" msgstr "" #: ../repair/scan.c:1229 #, c-format msgid "would reset bad sb for ag %d\n" msgstr "" #: ../repair/scan.c:1234 #, c-format msgid "reset bad agf for ag %d\n" msgstr "" #: ../repair/scan.c:1237 #, c-format msgid "would reset bad agf for ag %d\n" msgstr "" #: ../repair/scan.c:1242 #, c-format msgid "reset bad agi for ag %d\n" msgstr "" #: ../repair/scan.c:1245 #, c-format msgid "would reset bad agi for ag %d\n" msgstr "" #: ../repair/scan.c:1255 #, c-format msgid "bad uncorrected agheader %d, skipping ag...\n" msgstr "" #: ../repair/scan.c:1271 #, c-format msgid "bad agbno %u for btbno root, agno %d\n" msgstr "" #: ../repair/scan.c:1283 #, c-format msgid "bad agbno %u for btbcnt root, agno %d\n" msgstr "" #: ../repair/scan.c:1294 #, c-format msgid "bad agbno %u for inobt root, agno %d\n" msgstr "" #: ../repair/versions.c:83 #, c-format msgid "bogus quota flags 0x%x set in superblock" msgstr "" #: ../repair/versions.c:96 msgid ", bogus flags will be cleared\n" msgstr "" #: ../repair/versions.c:98 msgid ", bogus flags would be cleared\n" msgstr "" #: ../repair/versions.c:155 msgid "This filesystem has uninitialized extent flags.\n" msgstr "" #: ../repair/versions.c:163 msgid "This filesystem is marked shared.\n" msgstr "" #: ../repair/versions.c:169 msgid "" "This filesystem uses feature(s) not yet supported in this release.\n" "Please run a more recent version of xfs_repair.\n" msgstr "" #: ../repair/versions.c:175 #, c-format msgid "WARNING: unknown superblock version %d\n" msgstr "" #: ../repair/versions.c:178 msgid "This filesystem contains features not understood by this program.\n" msgstr "" #: ../repair/versions.c:186 msgid "" "WARNING: you have disallowed superblock-feature-bits-allowed\n" "\tbut this superblock has feature bits. The superblock\n" "\twill be downgraded. This may cause loss of filesystem meta-data\n" msgstr "" #: ../repair/versions.c:191 msgid "" "WARNING: you have disallowed superblock-feature-bits-allowed\n" "\tbut this superblock has feature bits. The superblock\n" "\twould be downgraded. This might cause loss of filesystem\n" "\tmeta-data.\n" msgstr "" #: ../repair/versions.c:205 msgid "" "WARNING: you have disallowed attributes but this filesystem\n" "\thas attributes. The filesystem will be downgraded and\n" "\tall attributes will be removed.\n" msgstr "" #: ../repair/versions.c:210 msgid "" "WARNING: you have disallowed attributes but this filesystem\n" "\thas attributes. The filesystem would be downgraded and\n" "\tall attributes would be removed.\n" msgstr "" #: ../repair/versions.c:223 msgid "" "WARNING: you have disallowed attr2 attributes but this filesystem\n" "\thas attributes. The filesystem will be downgraded and\n" "\tall attr2 attributes will be removed.\n" msgstr "" #: ../repair/versions.c:228 msgid "" "WARNING: you have disallowed attr2 attributes but this filesystem\n" "\thas attributes. The filesystem would be downgraded and\n" "\tall attr2 attributes would be removed.\n" msgstr "" #: ../repair/versions.c:241 msgid "" "WARNING: you have disallowed version 2 inodes but this filesystem\n" "\thas version 2 inodes. The filesystem will be downgraded and\n" "\tall version 2 inodes will be converted to version 1 inodes.\n" "\tThis may cause some hard links to files to be destroyed\n" msgstr "" #: ../repair/versions.c:247 msgid "" "WARNING: you have disallowed version 2 inodes but this filesystem\n" "\thas version 2 inodes. The filesystem would be downgraded and\n" "\tall version 2 inodes would be converted to version 1 inodes.\n" "\tThis might cause some hard links to files to be destroyed\n" msgstr "" #: ../repair/versions.c:261 msgid "" "WARNING: you have disallowed quotas but this filesystem\n" "\thas quotas. The filesystem will be downgraded and\n" "\tall quota information will be removed.\n" msgstr "" #: ../repair/versions.c:266 msgid "" "WARNING: you have disallowed quotas but this filesystem\n" "\thas quotas. The filesystem would be downgraded and\n" "\tall quota information would be removed.\n" msgstr "" #: ../repair/versions.c:290 msgid "" "WARNING: you have disallowed aligned inodes but this filesystem\n" "\thas aligned inodes. The filesystem will be downgraded.\n" "\tThis will permanently degrade the performance of this filesystem.\n" msgstr "" #: ../repair/versions.c:295 msgid "" "WARNING: you have disallowed aligned inodes but this filesystem\n" "\thas aligned inodes. The filesystem would be downgraded.\n" "\tThis would permanently degrade the performance of this filesystem.\n" msgstr "" #: ../repair/xfs_repair.c:62 #, c-format msgid "Usage: %s [-nLvV] [-o subopt[=value]] [-l logdev] [-r rtdev] devname\n" msgstr "" #: ../repair/xfs_repair.c:74 msgid "no error" msgstr "" #: ../repair/xfs_repair.c:75 msgid "bad magic number" msgstr "" #: ../repair/xfs_repair.c:76 msgid "bad blocksize field" msgstr "" #: ../repair/xfs_repair.c:77 msgid "bad blocksize log field" msgstr "" #: ../repair/xfs_repair.c:78 msgid "bad version number" msgstr "" #: ../repair/xfs_repair.c:80 msgid "filesystem mkfs-in-progress bit set" msgstr "" #: ../repair/xfs_repair.c:82 msgid "inconsistent filesystem geometry information" msgstr "" #: ../repair/xfs_repair.c:84 msgid "bad inode size or inconsistent with number of inodes/block" msgstr "" #: ../repair/xfs_repair.c:85 msgid "bad sector size" msgstr "" #: ../repair/xfs_repair.c:87 msgid "AGF geometry info conflicts with filesystem geometry" msgstr "" #: ../repair/xfs_repair.c:89 msgid "AGI geometry info conflicts with filesystem geometry" msgstr "" #: ../repair/xfs_repair.c:91 msgid "AG superblock geometry info conflicts with filesystem geometry" msgstr "" #: ../repair/xfs_repair.c:92 msgid "attempted to perform I/O beyond EOF" msgstr "" #: ../repair/xfs_repair.c:94 msgid "inconsistent filesystem geometry in realtime filesystem component" msgstr "" #: ../repair/xfs_repair.c:96 msgid "maximum indicated percentage of inodes > 100%" msgstr "" #: ../repair/xfs_repair.c:98 msgid "inconsistent inode alignment value" msgstr "" #: ../repair/xfs_repair.c:100 msgid "not enough secondary superblocks with matching geometry" msgstr "" #: ../repair/xfs_repair.c:102 msgid "bad stripe unit in superblock" msgstr "" #: ../repair/xfs_repair.c:104 msgid "bad stripe width in superblock" msgstr "" #: ../repair/xfs_repair.c:106 msgid "bad shared version number in superblock" msgstr "" #: ../repair/xfs_repair.c:111 #, c-format msgid "bad error code - %d\n" msgstr "" #: ../repair/xfs_repair.c:119 #, c-format msgid "-%c %s option cannot have a value\n" msgstr "" #: ../repair/xfs_repair.c:266 #, c-format msgid "" "\n" "fatal error -- " msgstr "" #: ../repair/xfs_repair.c:355 #, c-format msgid "sb root inode value %llu %sinconsistent with calculated value %lu\n" msgstr "" #: ../repair/xfs_repair.c:362 #, c-format msgid "resetting superblock root inode pointer to %lu\n" msgstr "" #: ../repair/xfs_repair.c:366 #, c-format msgid "would reset superblock root inode pointer to %lu\n" msgstr "" #: ../repair/xfs_repair.c:378 #, c-format msgid "" "sb realtime bitmap inode %llu %sinconsistent with calculated value %lu\n" msgstr "" #: ../repair/xfs_repair.c:385 #, c-format msgid "resetting superblock realtime bitmap ino pointer to %lu\n" msgstr "" #: ../repair/xfs_repair.c:389 #, c-format msgid "would reset superblock realtime bitmap ino pointer to %lu\n" msgstr "" #: ../repair/xfs_repair.c:401 #, c-format msgid "" "sb realtime summary inode %llu %sinconsistent with calculated value %lu\n" msgstr "" #: ../repair/xfs_repair.c:408 #, c-format msgid "resetting superblock realtime summary ino pointer to %lu\n" msgstr "" #: ../repair/xfs_repair.c:412 #, c-format msgid "would reset superblock realtime summary ino pointer to %lu\n" msgstr "" #: ../repair/xfs_repair.c:448 msgid "" "Primary superblock would have been modified.\n" "Cannot proceed further in no_modify mode.\n" "Exiting now.\n" msgstr "" #: ../repair/xfs_repair.c:464 #, c-format msgid "%s: cannot repair this filesystem. Sorry.\n" msgstr "" #: ../repair/xfs_repair.c:491 msgid "Found unsupported filesystem features. Exiting now.\n" msgstr "" #: ../repair/xfs_repair.c:504 #, c-format msgid "No modify flag set, skipping phase 5\n" msgstr "" #: ../repair/xfs_repair.c:514 msgid "Inode allocation btrees are too corrupted, skipping phases 6 and 7\n" msgstr "" #: ../repair/xfs_repair.c:520 msgid "Warning: no quota inodes were found. Quotas disabled.\n" msgstr "" #: ../repair/xfs_repair.c:523 msgid "Warning: no quota inodes were found. Quotas would be disabled.\n" msgstr "" #: ../repair/xfs_repair.c:528 msgid "Warning: quota inodes were cleared. Quotas disabled.\n" msgstr "" #: ../repair/xfs_repair.c:531 msgid "Warning: quota inodes would be cleared. Quotas would be disabled.\n" msgstr "" #: ../repair/xfs_repair.c:537 msgid "" "Warning: user quota information was cleared.\n" "User quotas can not be enforced until limit information is recreated.\n" msgstr "" #: ../repair/xfs_repair.c:541 msgid "" "Warning: user quota information would be cleared.\n" "User quotas could not be enforced until limit information was recreated.\n" msgstr "" #: ../repair/xfs_repair.c:549 msgid "" "Warning: group quota information was cleared.\n" "Group quotas can not be enforced until limit information is recreated.\n" msgstr "" #: ../repair/xfs_repair.c:553 msgid "" "Warning: group quota information would be cleared.\n" "Group quotas could not be enforced until limit information was recreated.\n" msgstr "" #: ../repair/xfs_repair.c:561 msgid "" "Warning: project quota information was cleared.\n" "Project quotas can not be enforced until limit information is recreated.\n" msgstr "" #: ../repair/xfs_repair.c:565 msgid "" "Warning: project quota information would be cleared.\n" "Project quotas could not be enforced until limit information was recreated.\n" msgstr "" #: ../repair/xfs_repair.c:573 msgid "No modify flag set, skipping filesystem flush and exiting.\n" msgstr "" #: ../repair/xfs_repair.c:591 msgid "Note - quota info will be regenerated on next quota mount.\n" msgstr "" #: ../repair/xfs_repair.c:597 #, c-format msgid "" "Note - stripe unit (%d) and width (%d) fields have been reset.\n" "Please set with mount -o sunit=,swidth=\n" msgstr "" #: ../repair/xfs_repair.c:613 msgid "done\n" msgstr "" #: ../rtcp/xfs_rtcp.c:30 #, c-format msgid "%s [-e extsize] [-p] source target\n" msgstr "" #: ../rtcp/xfs_rtcp.c:71 #, c-format msgid "%s: must specify files to copy\n" msgstr "" #: ../rtcp/xfs_rtcp.c:86 #, c-format msgid "%s: stat64 of %s failed\n" msgstr "" #: ../rtcp/xfs_rtcp.c:93 #, c-format msgid "%s: final argument is not directory\n" msgstr "" #: ../rtcp/xfs_rtcp.c:140 #, c-format msgid "%s: failed stat64 on %s: %s\n" msgstr "" #: ../rtcp/xfs_rtcp.c:161 #, c-format msgid "%s: %s filesystem has no realtime partition\n" msgstr "" #: ../rtcp/xfs_rtcp.c:182 ../rtcp/xfs_rtcp.c:210 #, c-format msgid "%s: open of %s failed: %s\n" msgstr "" #: ../rtcp/xfs_rtcp.c:199 #, c-format msgid "%s: set attributes on %s failed: %s\n" msgstr "" #: ../rtcp/xfs_rtcp.c:217 #, c-format msgid "%s: get attributes of %s failed: %s\n" msgstr "" #: ../rtcp/xfs_rtcp.c:227 ../rtcp/xfs_rtcp.c:262 #, c-format msgid "%s: %s is not a realtime file.\n" msgstr "" #: ../rtcp/xfs_rtcp.c:236 #, c-format msgid "%s: %s file extent size is %d, instead of %d.\n" msgstr "" #: ../rtcp/xfs_rtcp.c:248 ../rtcp/xfs_rtcp.c:271 #, c-format msgid "%s: open of %s source failed: %s\n" msgstr "" #: ../rtcp/xfs_rtcp.c:285 #, c-format msgid "%s: couldn't get direct I/O information: %s\n" msgstr "" #: ../rtcp/xfs_rtcp.c:295 #, c-format msgid "%s: extent size %d not a multiple of %d.\n" msgstr "" #: ../rtcp/xfs_rtcp.c:309 #, c-format msgid "The size of %s is not a multiple of %d.\n" msgstr "" #: ../rtcp/xfs_rtcp.c:312 #, c-format msgid "%s will be padded to %lld bytes.\n" msgstr "" #: ../rtcp/xfs_rtcp.c:318 #, c-format msgid "" "Use the -p option to pad %s to a size which is a multiple of %d bytes.\n" msgstr "" #: ../rtcp/xfs_rtcp.c:360 #, c-format msgid "%s: write error: %s\n" msgstr "" #: ../rtcp/xfs_rtcp.c:388 #, c-format msgid "%s: could not open %s: %s\n" msgstr ""