Return to README CVS log

Up to [Development] / xfs-cmds / xfstests / dmapi / src / suite2 / dist

Update copyright annotations and license boilerplates to correspond with SGI Legals preferences.
Merge of master-melb:xfs-cmds:24329a by kenmcd.

#
# Copyright (c) 2000-2001 Silicon Graphics, Inc.  All Rights Reserved.
#
                           DMAPI Test Suite
                          Informational File
                          ------------------

I) Getting Started

   A) Extracting from DMAPI_test.cpio

      1) Create a new directory for storing the tests.  We will refer to 
         this as the "base" directory.  The base directory can be
         located anywhere; it does NOT need to be in a DMAPI filesystem.

      2) Move the archive file DMAPI_test.cpio to the base directory
         and execute the following command to extract from the archive:
 
            cat DMAPI_test.cpio | cpio -icd

      3) There should now be several files and subdirectories in the base
         directory, including the file "file_list".  Read this file for a
         complete listing of which files should be present in which
         directories.  Compare "file_list" with the output of "ls -Rpl" 
         to be sure that you have the necessary files.

      4) The base directory contains the files and programs that are of
         immediate use for testing.  The "bindir" subdirectory contains
         the test programs and datafiles.  The "lib" and "src" subdirectories
         contain C libraries and source code for the C programs. 

   B) Checking the Existence and Version of DMAPI
 
      The program check_dmapi can verify that you have the correct
      version of DMAPI installed.  Note: it can only be run as root.
      Execute this command (from the "base" directory):
 
      bindir/check_dmapi
 
      It should report that you have a current version of DMAPI.  If it
      does not, it will also suggest which components of your DMAPI are 
      not current, and where to find a patch to update them.

   C) Configuration

      1) Creating the Test Directories

         a) The Test Filesystem
 
            Mount a DMAPI filesystem, or use an existing one.
            This filesystem's mount info MUST be listed in /etc/fstab.
 
            Write down the path to this filesystem's mountpoint, and label
            it as "m_main" for future use.
 
         b) The Main Test Directory
            
            Create a new directory in the "m_main" filesystem. 
 
            Write down the path to this directory.  Note ONLY the part
            that comes AFTER "m_main".  Label this as "d_name".
 
            EXAMPLE: You have a DMAPI filesystem /dmi_main  
                     You name the test directory /dmi_main/test_dir
            "m_main" is /dmi_main 
            "d_name" is /test_dir
 
         c) The Cross-NFS Test Directories 
 
            For NFS tests, all you must do is create two empty directories
            (one for nfs2, one for nfs3). They do NOT need to be in a 
            DMAPI filesystem.  
 
            Your main test directory will be mounted across NFS, into these
            two directories.  Normally, the tests will do this automatically.
            However, if you need to do this mount manually, the command
            would look like this example:
 
            mount -t nfs2 localhost:/dmi_main /dmi_nfs2
 
            Write down the paths to these nfs2 and nfs3 test directories.
            Label them "m_nfs2" and "m_nfs3" respectively.
 
         c) The Realtime Test Filesystem and Directory
 
            If you wish to test realtime i/o, you'll need a filesystem 
            mounted with a realtime partition, and a directory in that
            filesystem.  
 
            Label the path to the filesystem mountpoint as "m_rt".
            Label the path to the test directory as "d_rt".
 
      2) Configuring menu_test
 
         The Korn-shell script named menu_test is an interface to the
         other test programs.  At the beginning of the script, there
         is a "configuration section", in which is sets several variables
         for use in the rest of the script.  
         
         Open menu_test in any text editor and change the following
         variable assignments in the configuration section:
 
         a) base_dir:
            Set this to the pathname of your "base" directory 
            (where you un-archived "DMAPI_test.cpio").
 
         b) p_user:
            Tests that do not run as root will run as this "primary" user.
            Set this to any username. 
 
         c) m_main:
            The mountpoint of the main test filesystem.
            Set this to the value of "m_main" that you wrote down above.  
  
         d) d_name:  
            m_main concatenated with d_name is the main test directory path.
            Set this to the value for "d_name" that you wrote down above.
 
         e) m_nfs2:  
            The mountpoint of the nfs2 test filesystem.
            Set this to the value of "m_nfs2" that you wrote down above.
 
         f) m_nfs2:   
            The mountpoint of the nfs3 test filesystem.
            Set this to the value of "m_nfs3" that you wrote down above.
 
         g) m_rt:   
            The mountpoint of the realtime test filesystem.
            Set this to the value of "m_rt" that you wrote down above.
 
         h) d_rt:   
            The path to the realtime test directory.
            Set this to the value of "d_rt" that you wrote down above.
 
      3) Configuring "DMAPI_aliases"
 
         This is an optional alternative to the menu interface. It runs
         as a Korn shell "dot" script and creates an alias to each test. 
         It was made for those who wish to run tests directly from the
         command line.
 
         DMAPI_aliases has exactly the same configuration section as
         menu_test.  If you wish to use DMAPI_aliases, make the same
         changes to its configuration section. 
 
II) Running the Tests

   A) Using "menu_test" to run tests

      1) You must be superuser, using the Korn shell, to run menu_test.
         You also must have adjusted the variables in menu_test's 
         "configuration section", as was explained above.

      2) menu_test is (surprise!) menu based.  Choose options by entering
         their numbers.    
 
      3) The names of the menu options explain which DMAPI functions
         or DMAPI events are being tested.  Some of the options, labeled
         accordingly, run more than one test programs.

      4) See section SECTION# for a list of the test scripts and programs,
         and a brief explanation of each script or program's function.  

   B) Using "DMAPI_aliases" to run tests   

      1) NOTE: The aliases in DMAPI_aliases are meant to be used by
         those who are familiar with the test programs and wish to run
         them more directly.  [Designer's note: I included the alias
         file more out of nostalgia than necessity.]
      
      2) You should be superuser, using the Korn shell, to run DMAPI_aliases.
         You also must have adjusted the variables in DMAPI_aliases's 
         "configuration section", as was explained above.

      3) DMAPI_aliases should be invoked as a Korn shell "dot" script:

         . ./DMAPI_aliases 

         It sets an alias for each test program; each alias begins with
         the characters "do_" and is followed by some appropriate name.
         Read DMAPI_aliases, or execute "alias | grep do", to 

   C) Running tests directly

      1) For the VERY adventurous, all the tests in the "bindir" directory
         can be run directly from the command line.  Only some of the files
         in "bindir" are test scripts/programs.  Read section III for a list 
         of function tests and section IV for a list of run_test (.dat)
         testfiles.

      2) Running a test program without parameters will produce a list of
         correct options.  (The exception to this is check_dmapi, which 
         normally has no parameters.  check_dmapi takes only one option,
         [-v] for verbose output.)

      3) It is suggested that you read a program's source before running
         it directly.  (The source of the C programs is included in the
         "src" directory.)  Specificually, in each source file, an initial
         comment explains the program's options/parameters in detail.

III) DMAPI Function tests:
     
     This section offers a terse description of the DMAPI function tests.
     For those tests written in C, the source code is given in the "src" 
     directory.  The ksh scripts can, of course, be read directly.
     In all cases except check_dmapi, running the program without
     parameters will produce a list of correct options. 
  
   A) check_dmapi
      Written in: C 
      Test of: presence (and correct version) of DMAPI library and kernel.  
      Options: [-v] flag for verbose output.
 
   B) test_dmattr
      Written in: C 
      Test of: dm_get_dmattr, dm_set_dmattr, dm_remove_dmattr.

   C) test_efault
      Written in: C 
      Test of: various bad function calls that should generate EFAULT,
               according to the DMAPI specification.

   D) test_eventlist
      Written in: C 
      Test of: dm_get_eventlist, dm_set_eventlist.

   E) test_fileattr
      Written in: C 
      Test of: dm_get_fileattr, dm_set_fileattr,
               dm_get_dirattrs, dm_get_bulkattr.

   F) test_hole
      Written in: C 
      Test of: dm_probe_hole, dm_punch_hole.

   G) test_invis
      Written in: C 
      Test of: dm_read_invis, dm_write_invis.

   H) test_region
      Written in:  C 
      Test of: dm_get_region, dm_set,region.

   I) test_rights
      Written in: C 
      Test of: various bad function calls that should generate EACCES,
               and other conditions pertaining to DMAPI rights.

   J) test_allocinfo_1
      Written in: ksh
      Test of: dm_get_allocinfo.  

   K) test_allocinfo_2
      Written in: ksh
      Test of: dm_get_allocinfo.

IV) DMAPI Event tests and the "run_test" ksh script

   A) How to use the "run_test" script

      1) A quick description of run_test's behavior:
         run_test invokes a DMAPI daemon (as a ksh coprocess).  It then
         reads a "testfile", which contains a description of the test.    

      2) You must be superuser, using the Korn shell, to execute run_test.

      3) Executing run_test without parameters will produce a list of
         correct options.  For a much more in-depth explanation of the 
         options to run_test, read its own initial comment.      

   B) The existing .dat testfiles

     1) fail.dat
      2) main.dat
      3) nfs.dat
      4) old_nfs3.dat
      5) pending.dat
      6) pending_nfs.dat
      7) realtime.dat
      8) smallq.dat
      9) standard.dat
     10) standard_nfs.dat

   C) How to write ".dat" testfiles
      
      1) Overview

         A testfile contains a complete description of a DMAPI event test.
         Testfiles are divided into sections: the first two contain
         test initialization, while the remaining sections each contain ONE
         command, followed by a list of expected events.

         The following is a description of testfile syntax.  If you wish to 
         fully understand testfile syntax, PLEASE examine the existing
         testfiles and the "run_test" script.

      2) Event information variables
         
         a) From the daemon, "run_test" gets information about DMAPI events.
            This information is stored in event information variables.  

         b) NOTE: event information variables are not persistant. 
            After "run_test" has compared the expected and actual events
            for a command, and before it executes the next command, it
            unsets the values of all these variables.

         c) Most of these variables are arrays, indexed by the number of
            the event (starting with 0). For example, if the initial event
            is a read event, then we have "event[0]" set to "read", and
            "file_handle[0]" set to the handle of whatever file was read.

         d) "event_count" is a special variable.  It holds the number of
            events that were generated by the most recent command.   

         e) These are all the event information variables:

            contents event event_count fs_handle handle length
            offset media_designator mode mountpoint_handle
            mountpoint_path msg_str name new_name new_parent
            parent_handle ret_code root_handle sequence token  
            tries_left unmount_mode

         f) PLEASE examine the run_test script to see which variables 
            are set by which events.  (The scheme corresponds, roughly, 
            to the "Event Types" section of the DMAPI specification.)

      3) Testfile section 1:  List of required files

         a) A testfile's first section is a list of the files it requires.   
            If these files are not present in the "bindir" directory, 
            "run_test" will abort the test and inform the user of which 
            files are missing.  
         
         b) Each line of this section may contain ANY NUMBER of filenames.

         c) Lines beginning with // will be treated as comments.  The
            entirety of such lines will be ignored.
          
         d) The last line of this section should begin with three hyphens
            ---  Other characters on that line will be ignored. 

      4) Testfile section 2:  Initialization commands
         
         a) A testfile's second section consists of a list of commands.
            "run_test" will execute these commands before starting the
            DMAPI daemon.  Any necessary initialization should be done 
            here. 

         b) Each line of this section should be ONE shell command.

         c) Lines beginning with // will be treated as comments.  
            The entirety of such lines will be ignored.
          
         d) The last line of this section should begin with three hyphens
            "---"  Other characters on that line will be ignored.

      5) Testfile sections 3 and on:  Individual tests

         a) The remaining sections of a testfile consist of a single
            shell command, followed by descriptions of events that should
            be generated by the command.  
            
         b) Comments

            1) Comments are valid ONLY before the command. 

            2) Lines beginning with // will be treated as comments.  
               The entirety of such lines will be ignored.

            3) Lines beginning with @@ will be treated as "print" comments.
               Such lines will not be parsed, but they will be printed to
               standard output during the test.  This is useful for
               describing what each test does.

         c) Valid grammar for the command itself

            1) Standard command syntax: 
               This should be ONE shell command, on a line by itself.  
               
            2) Alternate command syntax:

               A) run_as_root:  
                  If the test is preceeded by the metacommand "run_as_root"
                  (on a line by itself) then the command will be run as
                  root rather than as "p_user".  The command should still
                  be one command on a line by itself.

               B) run_without_test:
                  If the test is preceeded by the metacommand 
                  "run_without_test" (on a line by itself), then ALL
                  subsequent lines in the section will be executed as
                  commands, and NO testing will be performed.  Note that
                  the commands will be executed as root.  This is useful
                  for re-initialization sections during a test.

         d) Valid grammar for the "expected events" lines

            1) [variable_name] [value]
               This specifies that the variable [variable_name] should be
               set to [value].  

            2) [variable_name_1] matches [variable_name_2]
               This specifies that both variables should be set to 
               the same value.  A list of valid variables

            3) [variable_name] store_in [string]
               This specifies that the contents of [variable_name] 
               should be stored in a variable named [string].
               The variable [string] can then be referenced as a
               variable in later tests.
   
               EXAMPLE: if two commands deal with the file "foobar",
               you might want to check that they both use the same handle.
               In the first section, write
                "handle[0] store_in old_handle_0" 
               In the second section, write
                "old_handle_0 matches handle[0]" 

            4) failure
               This specifies that the command is expected to fail
               (return some non-zero exit status).  If "failure"
               is not specified, the command is expected to succeed.
            
         e) The last line of these sections should begin with three
            hyphens "---".  Other characters on that line will be ignored.
 
      6) Sending messages to the DMAPI daemon


      7) Other "helper functions" for testfiles