File: [Development] / linux-2.6-xfs / kdb / ChangeLog (download)
Revision 1.43, Mon Jan 7 15:11:45 2008 UTC (9 years, 9 months ago) by lachlan.longdrop.melbourne.sgi.com
Branch: MAIN
Changes since 1.42: +15 -0
lines
Merge up to 2.6.24-rc6
Merge of 2.6.x-xfs-melb:linux:30301a by kenmcd.
|
2007-12-21 Jay Lan <jlan@sgi.com>
* Renamed kdb/kdba_bt_x86.c to arch/x86/kdba_bt.c. And thus, the x86
backtrace code is now moved into the kdb x86 patch.
* kdb v4.4-2.6.24-rc6-common-1.
2007-12-12 Jay Lan <jlan@sgi.com>
* kdb v4.4-2.6.24-rc5-common-1.
2007-12-05 Jay Lan <jlan@sgi.com>
* Fixed a 'sysctl table check failed' problem.
* kdb v4.4-2.6.24-rc4-common-1.
2007-11-26 Jay Lan <jlan@sgi.com>
* kdb v4.4-2.6.24-rc3-common-1.
2007-11-13 Jay Lan <jlan@sgi.com>
* Back ported "New KDB USB interface" from Aaron Young in
v4.4-2.6.23-common-2 to 2.6.24 kdb patchset.
* kdb v4.4-2.6.24-rc2-common-2.
2007-11-12 Jay Lan <jlan@sgi.com>
* kdb v4.4-2.6.24-rc2-common-1.
2007-11-09 Jay Lan <jlan@sgi.com>
* Rebase to 2.6.24-rc1 kernel
* - merged kdb-v4.4-2.6.23-i386-1 and kdb-v4.4-2.6.23-x86_64-1
* into kdb-v4.4-2.6.24-rc1-x86-1
* - Fields "done", "sglist_len", and "pid" are removed from
* struct scsi_cmnd. Thus, these fields are no longer displayed
* on "sc" command.
* kdb v4.4-2.6.24-rc1-common-1.
2007-11-08 Jay Lan <jlan@sgi.com>
* New KDB USB interface, Aaron Young <ayoung@sgi.com>
* 1. This patch allows KDB to work with any Host Contoller driver
* and call the correct HC driver poll routine (as long as the
* HC driver provides a .kdb_poll_char routine via it's
* associated hc_driver struct).
* 2. Hotplugged keyboards are now recognized by KDB.
* 3. Currently KDB can only make use of 1 USB type keyboard.
* New code can handle up to 8 attached keyboards - input is
* multiplexed from all of them while in kdb.
* kdb v4.4-2.6.23-common-2.
2007-10-24 Jay Lan <jlan@sgi.com>
* kdb v4.4-2.6.23-common-1.
2007-09-26 Jay Lan <jlan@sgi.com>
* kdb v4.4-2.6.23-rc8-common-1.
2007-09-21 Jay Lan <jlan@sgi.com>
* kdb v4.4-2.6.23-rc7-common-1.
2007-09-12 Jay Lan <jlan@sgi.com>
* kdb v4.4-2.6.23-rc6-common-1.
2007-09-06 Jay Lan <jlan@sgi.com>
* kdb v4.4-2.6.23-rc5-common-1.
2007-08-30 Keith Owens <kaos@sgi.com>
* New i386/x86_64 backtrace requires that kdb_save_running() does not
exit until after kdb_main_loop() has completed.
* List more noret functions in i386/x86_64 backtrace code.
* Call to a noret function ends a basic block.
* After a call to a noret function, eip/rip may be pointing at the next
function or not, depending on function alignment. Jay Lan.
* kdb v4.4-2.6.23-rc4-common-2.
2007-08-30 Jay Lan <jlan@sgi.com>
* kdb v4.4-2.6.23-rc4-common-1.
2007-08-28 Keith Owens <kaos@sgi.com>
* kdb/kdba_bt_x86.c:
* Handle the variable amount of stack data that is pushed by x86_64
* hardware on an interrupt.
* Add instruction vmsave.
* Handle pop to %rsp.
* Cope with return address for functions defined as ATTRIB_NORET.
* Include CONFIG_DEBUG_INFO in the summary line of bb_all.
* Check for an interrupt that was delivered while user space was in
* control.
* A return to child_rip ends a backtrace.
* Ignore level2_kernel_pgt and level3_kernel_pgt data areas if they
* occur within the text segment.
* kdb v4.4-2.6.23-rc3-common-2.
2007-08-24 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.23-rc3-common-1.
2007-08-24 Jay Lan <jlan@sgi.com>
* kdb/kdba_bt_x86.c:
* retint_kernel is only defined for CONFIG_PREEMPT.
* Handle assembler code for CONFIG_HIBERNATION=y.
* Handle assembler code for CONFIG_MATH_EMULATION=y.
* Handle assembler code for CONFIG_XEN=y.
* Handle assembler code for CONFIG_KPROBES=y.
* Add CC version to the bb_all header.
* Handle spurious label in jprobe_return.
* Handle stack switch in jprobe_return.
* Prefix register name with '%' in xadd/xchg temporary variable.
* Require bb_usage_mov() to handle all the special cases internally.
* Handle stack manipulation for kexec.
* Handle spurious label in kretprobe_trampoline_holder.
* Add instructions clgi, invlpga, rcl, rdpmc, stgi, vmclear,
* vmlaunch, vmload, vmptrld, vmread, vmresume, vmrun, vmwrite,
* xstore-rng.
* Exclude more 16 bit and/or real mode acpi functions from bb_all.
* Handle assembler stack switching code in i386 do_softirq.
* kdb/kdbmain.c:
* Add CC version to the summary output.
* Bump debug_kmalloc pool from 128K to 256K, some of the kernel
* functions have huge numbers of basic blocks and jumps between them.
* Correct reinstallation of breakpoints when exiting KDB.
* Keith Owens.
* kdb v4.4-2.6.23-rc2-common-2.
2007-08-07 Jay Lan <jlan@sgi.com>
* kdb v4.4-2.6.23-rc2-common-1.
2007-08-03 Keith Owens <kaos@sgi.com>
* kdba_bt_x86.c: Rename some variables to make the code more readable.
Print more debug information when merging register states and when
calculating the new stack pointer.
* kdb v4.4-2.6.23-rc1-common-2.
2007-07-30 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.23-rc1-common-1.
2007-07-26 Keith Owens <kaos@sgi.com>
* New x86 backtrace code.
* kdb v4.4-2.6.22-common-4.
2007-07-17 Keith Owens <kaos@sgi.com>
* Make kdb_printf_lock an irq lock to keep lockdep happy.
* kdb v4.4-2.6.22-common-3.
2007-07-13 Keith Owens <kaos@sgi.com>
* Increase the size of the debug_alloc pool.
* Add the caller that obtained each entry in the debug_alloc pool.
* Poison entries in the debug_alloc pool.
* Track current and maximum usage in debug_alloc pool.
* Print the debug_alloc entries that are still in use when kdb exits
(memory leaks).
* Increase the default value of BTARGS to 9.
* kdb v4.4-2.6.22-common-2.
2007-07-09 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.22-common-1.
2007-07-02 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.22-rc7-common-1.
2007-06-20 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.22-rc5-common-1.
2007-06-15 Keith Owens <kaos@sgi.com>
* Do not include asm/kdb.h unless CONFIG_KDB is on. Dave Jiang.
* kdb v4.4-2.6.22-rc4-common-2.
2007-06-08 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.22-rc4-common-1.
2007-05-28 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.22-rc3-common-1.
2007-05-22 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.22-rc2-common-1.
2007-05-22 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.22-rc1-common-1.
2007-05-17 Keith Owens <kaos@sgi.com>
* Add rdmsr and wrmsr commands for i386 and x86_64. Original patch by
Bernardo Innocenti for i386, reworked by Keith Owens to make it safe
on all cpu models and to handle both i386 and x86_64.
* kdb v4.4-2.6.21-common-3.
2007-05-15 Keith Owens <kaos@sgi.com>
* Correct alignment of debug_alloc_header.
* kdb v4.4-2.6.21-common-2.
2007-04-29 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.21-common-1.
2007-04-16 Keith Owens <kaos@sgi.com>
* Remove dead symbol declarations.
* kdb v4.4-2.6.21-rc7-common-2.
2007-04-16 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.21-rc7-common-1.
2007-04-10 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.21-rc6-common-1.
2007-04-02 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.21-rc5-common-1.
2007-03-19 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.21-rc4-common-1.
2007-03-14 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.21-rc3-common-1.
2007-03-14 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.21-rc2-common-1.
2007-03-01 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.21-rc1-common-1.
2007-03-01 Keith Owens <kaos@sgi.com>
* Remove sparse warnings.
* kdb v4.4-2.6.20-common-6.
2007-02-27 Keith Owens <kaos@sgi.com>
* set_irq_regs() on entry to kdb() if they are not already set.
* kdb v4.4-2.6.20-common-5.
2007-02-22 Keith Owens <kaos@sgi.com>
* Initialise struct disassemble_info in kdb_id1().
* kdb v4.4-2.6.20-common-4.
2007-02-16 Keith Owens <kaos@sgi.com>
* Clean up debug_alloc_pool code.
* kdb v4.4-2.6.20-common-3.
2007-02-16 Keith Owens <kaos@sgi.com>
* Initialise variable bits of struct disassemble_info each time.
* kdb v4.4-2.6.20-common-2.
2007-02-06 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.20-common-1.
2007-02-01 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.20-rc7-common-1.
2007-01-08 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.20-rc4-common-1.
2007-01-02 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.20-rc3-common-1.
2006-12-21 Keith Owens <kaos@sgi.com>
* Initialize the debug_kmalloc pool on the first call, so it can be
used at any time.
* kdb v4.4-2.6.20-rc1-common-2.
2006-12-20 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.20-rc1-common-1.
2006-11-30 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.19-common-1.
2006-11-30 Keith Owens <kaos@sgi.com>
* Do not access registers if kdb_current_regs is NULL.
* kdb v4.4-2.6.19-rc6-common-3.
2006-11-27 Keith Owens <kaos@sgi.com>
* Only use VT keyboard if the command line allows it and ACPI indicates
that there is an i8042.
* Optimize kdb_read() to reduce the risk of dropping input characters.
* Print cpumasks as lists instead of hex, also cope with long lists.
* kdb v4.4-2.6.19-rc6-common-2.
2006-11-20 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.19-rc6-common-1.
2006-11-09 Keith Owens <kaos@sgi.com>
* Change kdb() to fastcall.
* Correct loop in kdb_help(). Georg Nikodym.
* Only use VT console if the command line allows it.
* kdb v4.4-2.6.19-rc5-common-2.
2006-11-08 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.19-rc5-common-1.
2006-11-01 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.19-rc4-common-1.
2006-10-24 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.19-rc3-common-1.
2006-10-24 Keith Owens <kaos@sgi.com>
* Remove redundant regs and envp parameters.
* kdb v4.4-2.6.19-rc2-common-2.
2006-10-18 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.19-rc2-common-1.
2006-10-11 Keith Owens <kaos@sgi.com>
* Move kdbm_x86.c from the i386 to the common KDB patch.
* Expand kdbm_x86.c to work on x86_64 as well as i386.
* kdb v4.4-2.6.19-rc1-common-2.
2006-10-09 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.19-rc1-common-1.
2006-10-06 Keith Owens <kaos@sgi.com>
* Remove #include <linux/config.h>
* kdb v4.4-2.6.18-common-2.
2006-09-20 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.18-common-1.
2006-09-15 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.18-rc7-common-1.
2006-08-29 Keith Owens <kaos@sgi.com>
* Rewrite all backtrace code.
* kdb v4.4-2.6.18-rc5-common-2.
2006-08-28 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.18-rc5-common-1.
2006-08-08 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.18-rc4-common-1.
2006-08-04 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.18-rc3-common-1.
2006-07-18 Keith Owens <kaos@sgi.com>
* 8250.c locking has been fixed so there is no need to break spinlocks
for keyboard entry.
* kdb v4.4-2.6.18-rc2-common-2.
2006-07-18 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.18-rc2-common-1.
2006-07-12 Keith Owens <kaos@sgi.com>
* Remove dead KDB_REASON codes.
* The main kdb() function is now always entered with interrupts
disabled, so there is no need to disable bottom halves.
* sparse cleanups.
* kdb v4.4-2.6.18-rc1-common-2.
2006-07-07 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.18-rc1-common-1.
2006-07-04 Keith Owens <kaos@sgi.com>
* Add KDB_REASON_CPU_UP and callbacks for cpus coming online.
* Relegate KDB_REASON_SILENT to KDB internal use only.
* Backout the v4.4-2.6.15-common-3 change that made KDB_REASON_SILENT
wait for cpus, the Dell Xeon problem has been fixed.
* notify_die() is not called for KDB_REASON_SILENT nor
KDB_REASON_CPU_UP, these events do not stay in KDB.
* Export kdb_current_task for kdbm_x86. SuSE patch
kdb-missing-export.diff
* Scale kdb_wait_for_cpus_secs by the number of online cpus.
* Delete kdb_enablehwfault, architectures now do their own setup.
* Delete kdba_enable_mce, architectures now do their own setup.
* Delete kdba_enable_lbr, kdba_disable_lbr, kdba_print_lbr,
page_fault_mca. Only ever implemented on x86, difficult to maintain
and rarely used in the field.
* Replace #ifdef KDB_HAVE_LONGJMP with #ifdef kdba_setjmp.
* kdb v4.4-2.6.17-common-2.
2006-06-19 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.17-common-1.
2006-05-31 Keith Owens <kaos@sgi.com>
* Break spinlocks for keyboard entry. Hopefully a temporary hack while
I track down why keyboard entry to KDB is hanging.
* kdb v4.4-2.6.17-rc5-common-2.
2006-05-25 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.17-rc5-common-1.
2006-05-15 Keith Owens <kaos@sgi.com>
* Refresh bfd related files from binutils 2.16.91.0.2.
* kdb v4.4-2.6.17-rc4-common-2.
2006-05-12 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.17-rc4-common-1.
2006-04-28 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.17-rc3-common-1.
2006-04-22 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.17-rc2-common-1.
2006-04-11 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.17-rc1-common-1.
2006-04-05 Keith Owens <kaos@sgi.com>
* More fixes for the timing race with KDB_ENTER_SLAVE.
* kdb v4.4-2.6.16-common-5.
2006-03-30 Keith Owens <kaos@sgi.com>
* Some code was testing KDB_IS_RUNNING() twice, which left it open to
races. Cache the result instead.
* kdb v4.4-2.6.16-common-4.
2006-03-30 Keith Owens <kaos@sgi.com>
* Change CONFIG_LKCD to CONFIG_LKCD_DUMP.
* kdb v4.4-2.6.16-common-3.
2006-03-22 Keith Owens <kaos@sgi.com>
* Add some more xpc flags. Dean Nelson, SGI.
* Replace open coded counter references with atomic_read().
* Pass early_uart_console to early_uart_setup(). Francois
Wellenreiter, Bull.
* Replace open code with for_each_online_cpu().
* If cpus do not come into kdb after a few seconds then let
architectures send a more forceful interrupt.
* Close a timing race with KDB_ENTER_SLAVE.
* kdb v4.4-2.6.16-common-2.
2006-03-21 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.16-common-1.
2006-03-14 Nathan Scott <nathans@sgi.com>
* kdb v4.4-2.6.16-rc6-common-1.
2006-02-28 Nathan Scott <nathans@sgi.com>
* kdb v4.4-2.6.16-rc5-common-1.
2006-02-20 Nathan Scott <nathans@sgi.com>
* kdb v4.4-2.6.16-rc4-common-1.
2006-02-06 Keith Owens <kaos@sgi.com>
* Change CONFIG_CRASH_DUMP to CONFIG_LKCD.
* Remove obsolete kdb_notifier_list.
* kdb v4.4-2.6.16-rc2-common-2.
2006-02-06 Keith Owens <kaos@sgi.com>
* Add xpcusers command. Dean Nelson, SGI.
* kdb v4.4-2.6.16-rc2-common-1.
2006-02-02 Keith Owens <kaos@sgi.com>
* Check if we have a console before using it for KDB.
* kdb v4.4-2.6.16-rc1-common-3.
2006-02-01 Keith Owens <kaos@sgi.com>
* Add option 'R' to the pid command to reset to the original task.
* Include 'pid R' in archkdb* commands to reset up the original failing
task. Users may have switched to other cpus and/or tasks before
issuing archkdb.
* Compile fix for kdbm_pg.c on i386.
* kdb v4.4-2.6.16-rc1-common-2.
2006-01-18 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.16-rc1-common-1.
2006-01-11 Keith Owens <kaos@sgi.com>
* Plug a timing race between KDB_ENTER_SLAVE and KDB_ENTER, and allow
the cpu command to switch to a slave cpu.
* KDB_REASON_SILENT now waits for other cpus, to avoid spurious NMI
events that were seen on some Xeon systems.
* kdb v4.4-2.6.15-common-3.
2006-01-08 Keith Owens <kaos@sgi.com>
* kdb mainline invokes DIE_KDEBUG_ENTER and DIE_KDEBUG_LEAVE via
notify_die.
* Move xpc debug support from xpc to mainline kdb.
* kdbm_cm.c: check if file_lock_operations or lock_manager_operations
are set before dereferencing them. Felix Blyakher, SGI.
* kdb v4.4-2.6.15-common-2.
2006-01-04 Keith Owens <kaos@sgi.com>
* Print all buffers on a page in inode pages and update formatting to be
legible, too. David Chinner, SGI.
* Update page flags in kdbm_pg.
* Remove inline from *.c files.
* kdb v4.4-2.6.15-common-1.
2005-12-25 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.15-rc7-common-1.
2005-12-20 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.15-rc6-common-1.
2005-12-10 Keith Owens <kaos@sgi.com>
* Update mapping of flags to strings in kdbm_pg.c and kdbm_vm.c.
* kdb v4.4-2.6.15-rc5-common-3.
2005-12-06 Keith Owens <kaos@sgi.com>
* Add RECOVERY flag to global KDB flags.
* Add kdb_{save,restore}_flags.
* kdb v4.4-2.6.15-rc5-common-2.
2005-12-05 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.15-rc5-common-1.
2005-12-02 Keith Owens <kaos@sgi.com>
* kdbm_vm.c: offsets of page macros should be unsigned long. Reported
by Dean Nelson, SGI.
* kdb v4.4-2.6.15-rc4-common-1.
2005-11-30 Keith Owens <kaos@sgi.com>
* New follow_page() API.
* kdb v4.4-2.6.15-rc3-common-1.
2005-11-21 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.15-rc2-common-1.
2005-11-15 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.15-rc1-common-1.
2005-11-15 Keith Owens <kaos@sgi.com>
* Allow kdb_printf() to be used outside kdb, in preemptible context.
* Build with CONFIG_SWAP=n. Reported by Leo Yuriev.
* kdb v4.4-2.6.14-common-2.
2005-10-28 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.14-common-1.
2005-10-21 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.14-rc5-common-1.
2005-10-11 Keith Owens <kaos@sgi.com>
* Handle removal of USB keyboard. Aaron Young, SGI.
* kdb v4.4-2.6.14-rc4-common-1.
2005-10-05 Keith Owens <kaos@sgi.com>
* Extend kdb_notifier_list() codes to include dumping.
* Use emergency_restart() for reboot, it can be called from interrupt
context, unlike machine_restart().
* kdb v4.4-2.6.14-rc3-common-1.
2005-09-21 Keith Owens <kaos@sgi.com>
* Support kdb_current_task in register display and modify commands.
* Document what changes kdb's notion of the current task.
* Update rd documentation for IA64.
* Move some definictions to kdbprivate.h and remove some unused symbol
exports.
* kdb v4.4-2.6.14-rc2-common-1.
2005-09-20 Keith Owens <kaos@sgi.com>
* Document IA64 handlers command.
* Add more fields to the task command.
* Cope with MCA/INIT handlers in the ps command.
* Namespace cleanup, delete unused exports, make some functions static.
* Add a kdb_notifier_list callback when kdb is about to reboot the
system.
* kdb v4.4-2.6.14-rc1-common-1.
2005-08-29 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.13-common-1.
2005-08-24 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.13-rc7-common-1.
2005-08-08 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.13-rc6-common-1.
2005-08-02 Keith Owens <kaos@sgi.com>
* Print more fields from filp, dentry.
* Add kdb=on-nokey to suppress kdb entry from the keyboard.
* kdb v4.4-2.6.13-rc5-common-1.
2005-07-30 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.13-rc4-common-1.
2005-07-26 Keith Owens <kaos@sgi.com>
* Fix compile problem with CONFIG_USB_KBD.
* kdb v4.4-2.6.13-rc3-common-3.
2005-07-22 Keith Owens <kaos@sgi.com>
* The asmlinkage kdb() patch was lost during packaging. Reinstate it.
* kdb v4.4-2.6.13-rc3-common-2.
2005-07-19 Keith Owens <kaos@sgi.com>
* Add support for USB keyboard (OHCI only). Aaron Young, SGI.
* kdb v4.4-2.6.13-rc3-common-1.
2005-07-08 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.13-rc2-common-1.
2005-07-01 Keith Owens <kaos@sgi.com>
* Make kdb() asmlinkage to avoid problems with CONFIG_REGPARM.
* Change some uses of smp_processor_id() to be preempt safe.
* Use DEFINE_SPINLOCK().
* kdb v4.4-2.6.13-rc1-common-1.
2005-06-18 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.12-common-1.
2005-06-08 Keith Owens <kaos@sgi.com>
* Correct early exit from bd *.
* kdb v4.4-2.6.12-rc6-common-1.
2005-05-25 Keith Owens <kaos@sgi.com>
* Delete Documentation/kdb/dump.txt. lkcd now has reasonable
integration with kdb.
* kdb v4.4-2.6.12-rc5-common-1.
2005-05-08 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.12-rc4-common-1.
2005-04-21 Keith Owens <kaos@sgi.com>
* Add rpte command (find the pte for a physical page).
* kdb v4.4-2.6.12-rc3-common-1.
2005-04-06 Keith Owens <kaos@sgi.com>
* Add rq and rqa commands. John Hawkes, SGI.
* kdb v4.4-2.6.12-rc2-common-1.
2005-03-29 Keith Owens <kaos@sgi.com>
* Use register_sysctl_table() instead of patching kernel/sysctl.c.
* Non-ASCII characters are not printable.
* kdb v4.4-2.6.12-rc1-common-1.
2005-03-15 Keith Owens <kaos@sgi.com>
* More coexistence patches for lkcd. Jason Uhlenkott, SGI.
* kdb v4.4-2.6.11-common-3.
2005-03-08 Keith Owens <kaos@sgi.com>
* Coexistence patches for lkcd. Jason Uhlenkott, SGI.
* kdb v4.4-2.6.11-common-2.
2005-03-03 Keith Owens <kaos@sgi.com>
* Add kdb to drivers/serial/8250_early.c. Francois Wellenreiter, Bull.
* kdb v4.4-2.6.11-common-1.
2005-02-14 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.11-rc4-common-1.
2005-02-08 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.11-rc3-bk4-common-1.
2005-02-03 Keith Owens <kaos@sgi.com>
* Print more superblock fields. Nathan Scott, SGI.
* Remove kallsyms correction for modules, Linus took it.
* kdb v4.4-2.6.11-rc3-common-1.
2005-01-27 Keith Owens <kaos@sgi.com>
* Add bio command. Nathan Scott, SGI.
* kdb v4.4-2.6.11-rc2-common-1.
2005-01-20 Keith Owens <kaos@sgi.com>
* Include kallsyms correction for modules until Linus takes it.
* kdb v4.4-2.6.11-rc1-bk7-common-1.
2005-01-12 Keith Owens <kaos@sgi.com>
* kallsyms now supports all symbols properly, remove kdb patch.
* Add last ditch allocator for debugging.
* Update kdb_meminfo_read_proc() for vmalloc changes.
* Update kdbm_vm.c for 4 level page tables.
* kdb v4.4-2.6.11-rc1-common-1.
2004-12-25 Keith Owens <kaos@sgi.com>
* Add kobject command.
* Ignore low addresses and large offsets in kdbnearsym().
* Console updates for sn2 simulator.
* kdb v4.4-2.6.10-common-1.
2004-12-07 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.10-rc3-common-1.
2004-11-23 Keith Owens <kaos@sgi.com>
* Remove warning message from kdb_get_one_user_page(), it was too noisy.
* kdb v4.4-2.6.10-rc2-common-1.
2004-11-02 Keith Owens <kaos@sgi.com>
* Build with kdb patch applied but CONFIG_KDB=n.
* kdb v4.4-2.6.10-rc1-common-2.
2004-10-29 Keith Owens <kaos@sgi.com>
* Handle new compression scheme for kallsyms.
* Handle move of DEAD and ZOMBIE for task->state to task->exit_state.
* Tweak the concept of a valid kernel address to get all symbols,
including the symbols in the ia64 gate page.
* kdb v4.4-2.6.10-rc1-common-1.
2004-10-21 Keith Owens <kaos@sgi.com>
* Handle variable size for the kernel log buffer.
* kdb v4.4-2.6.9-common-2.
2004-10-19 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.9-common-1.
2004-10-12 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.9-rc4-common-1.
2004-10-01 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.9-rc3-common-1.
2004-09-30 Keith Owens <kaos@sgi.com>
* Add stackdepth command to Documentation/kdb/kdb.mm. stackdepth is
only supported on i386 and ia64 at the moment.
* Skip kdbm_pg memmap build on x86_64. Scott Lurndal, 3leafnetworks.
* Export kdb_serial_str for modular I/O. Bryan Cardillo, UPenn.
* Reinstate tab completion for symbols.
* kdb v4.4-2.6.9-rc2-common-2.
2004-09-14 Keith Owens <kaos@sgi.com>
* Add task states C (traCed) and E (dEad).
* kdb v4.4-2.6.9-rc2-common-1.
2004-08-27 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.9-rc1-common-1.
2004-08-14 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.8-common-1.
2004-08-12 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.8-rc4-common-1.
2004-08-05 Keith Owens <kaos@sgi.com>
* Mark kdb_initcall as __attribute_used__ for newer gcc.
* kdb v4.4-2.6.8-rc3-common-2.
2004-08-04 Keith Owens <kaos@sgi.com>
* Add mdp (memory display physical) comnmand.
Ananth N Mavinakayanahalli, IBM.
* kdb v4.4-2.6.8-rc3-common-1.
2004-07-18 Keith Owens <kaos@sgi.com>
* Patch for new sn_console. Erik Jacobson. SGI.
* kdb v4.4-2.6.8-rc2-common-1.
2004-07-12 Keith Owens <kaos@sgi.com>
* Convert kdbm_task to standard cpumask_t.
* Document '*' (all breakpoints) option on bd/be/bc commands.
* kdb v4.4-2.6.8-rc1-common-1.
2004-06-30 Keith Owens <kaos@sgi.com>
* Common changes to help the x86-64 port.
* kdb v4.4-2.6.7-common-3.
2004-06-20 Keith Owens <kaos@sgi.com>
* Move kdb includes in mm/swapfile.c to reduce conflicts with other
SGI patches.
* kdb v4.4-2.6.7-common-2.
2004-06-16 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.7-common-1.
2004-06-09 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.7-rc3-common-1.
2004-06-09 Keith Owens <kaos@sgi.com>
* Namespace clean up. Mark code/variables as static when it is only
used in one file, delete dead code/variables.
* Saved interrupt state requires long, not int.
* kdb v4.4-2.6.7-rc2-common-3.
2004-06-08 Keith Owens <kaos@sgi.com>
* Whitespace clean up, no code changes.
* kdb v4.4-2.6.7-rc2-common-2.
2004-06-07 Keith Owens <kaos@sgi.com>
* kdb v4.4-2.6.7-rc2-common-1.
2004-06-06 Keith Owens <kaos@sgi.com>
* Avoid recursion problems in kdb_init().
* Add standard archkdb commands.
* Add per_cpu command.
* Move kdb_{get,put}userarea_size definitions to linux/kdb.h.
* kdb v4.4-2.6.6-common-2.
2004-05-23 Keith Owens <kaos@sgi.com>
* Shrink the output from the cpu command.
* Add cpu state 'I', the cpu is idle.
* Add cpu state '+', some kdb data is available but the cpu is not
responding.
* Do not print tasks in state I or M by default in ps and bta commands.
* Add states I (idle task) and M (sleeping system daemon) to ps and
bta commands.
* Delete unused variables.
* Move private kdb fields from kdb.h to kdbprivate.h.
* Print 'for keyboard entry' for the special cases when KDB_ENTER() is
used to get registers.
* Move bfd.h and ansidecl.h from arch/$(ARCH)/kdb to include/asm-$(ARCH)
and remove -I arch/$(ARCH)/kdb.
* dmesg command now prints from either the start or end of dmesg, or at
an arbitrary point in the middle of the kernel log buffer.
* Sensible string dump for multi byte md commands.
* 'page' command handles ia64 correctly.
* Show some activity when waiting for cpus to enter kdb.
* Change the KDB entry code to <esc>KDB.
* Allow comment commands, starting with '#'.
* Commands defined using defcmd from kdb_cmds are not printed as they
are entered, use defcmd with no parameters to print all the defined
commands.
* Add summary command.
* Update copyright notices.
* Zero suppression on md command.
* Make set NOSECT=1 the default.
* PPC64 uses OF-stdout instead of console. Ananth N Mavinakayanahalli.
* kdb v4.4-2.6.6-common-1.
2004-05-10 Keith Owens <kaos@sgi.com>
* kdb v4.3-2.6.6-common-1.
2004-05-06 Keith Owens <kaos@sgi.com>
* kdb v4.3-2.6.6-rc3-common-1.
2004-05-06 Keith Owens <kaos@sgi.com>
* kdb v4.3-2.6.6-rc2-common-1.
2004-04-30 Keith Owens <kaos@sgi.com>
* Rewrite inode_pages command for new radix code in struct page.
* kdb v4.3-2.6.6-rc1-common-1.
2004-04-11 Keith Owens <kaos@sgi.com>
* Unlock sn_sal_lock before entering kdb from sn_serial.
* kdb v4.3-2.6.5-common-2.
2004-04-05 Keith Owens <kaos@sgi.com>
* kdb v4.3-2.6.5-common-1.
2004-03-22 Keith Owens <kaos@sgi.com>
* kdb v4.3-2.6.5-rc2-common-1.
2004-03-12 Keith Owens <kaos@sgi.com>
* More work to avoid spurious messages from WARN_CONSOLE_UNLOCKED().
* bh command bug fixes. Nathan Scott.
* kdb v4.3-2.6.4-common-1.
2004-03-06 Keith Owens <kaos@sgi.com>
* Set KDB_IS_RUNNING() during kdb_init to avoid spurious messages from
WARN_CONSOLE_UNLOCKED().
* Correct loss of symbol names in kdbnearsym.
* kdb v4.3-2.6.4-rc2-common-1.
2004-02-29 Keith Owens <kaos@sgi.com>
* kdb v4.3-2.6.4-rc1-common-1.
2004-02-21 Keith Owens <kaos@sgi.com>
* Correct build of kdb_cmds when using a separate object directory and
make it quiet. j-nomura (NEC), Keith Owens.
* kdb v4.3-2.6.3-common-2.
2004-02-18 Keith Owens <kaos@sgi.com>
* kdb v4.3-2.6.3-common-1.
2004-02-17 Keith Owens <kaos@sgi.com>
* Remove WAR for incorrect console registration patch.
* kdb v4.3-2.6.3-rc4-common-1.
2004-02-17 Keith Owens <kaos@sgi.com>
* Convert longjmp buffers from static to dynamic allocation, for large
cpu counts.
* Tweak kdbm_task for SMP/UP.
* Reconcile with kdb-v4.3 2.4.25-rc1-common-1.
* Simplify coexistence with NPTL patches.
* Support kill command on new scheduler.
* Do not refetch data when printing a value as characters.
* Document the pid command.
* Work around 2.6 kallsyms 'feature'.
* Upgrade to 2.6.3-rc3.
* WAR for incorrect console registration patch.
* kdb v4.3-2.6.3-rc3-common-1.
2003-12-03 Keith Owens <kaos@sgi.com>
* Reconcile 2.6-test versions from Xavier Bru (Bull), Greg Banks (SGI),
Jim Houston (Concurrent Computer Corp).
* Reconcile with kdb v4.3-2.4.23-common-2.
* Clean up CONFIG_KDB changes to {scripts,kernel}/kallsyms.c.
* Correct handling of kdb command line arguments.
* Make hooks into module code less intrusive.
* Delete kdb_active_task, not required with O(1) scheduler.
* Port kdbm_task.c from 2.4.
* Disable debug check in exit.c::next_thread() when kdb is running.
* Remove "only bh_disable when interrupts are set". BH must be disabled
in kdb to prevent deadlock on breakpoints in interrupt handlers.
* Add kdb to drivers/char/sn_serial.c.
* kdb v4.3-2.6.0-test11-common-1.
2003-11-11 Xavier Bru <xavier.bru@bull.net>
* Merge to 2.6.0-test9
2003-10-17 Xavier Bru <xavier.bru@bull.net>
* fix NUll ptr in kdb_ps at early prompt.
2003-10-14 Xavier Bru <xavier.bru@bull.net>
* fix NUll ptr in kdb_ps when cpu not present.
2003-10-06 Xavier Bru <xavier.bru@bull.net>
* Merge to 2.6.0-test5
* fix compile error with CONFIG_MODULES not set.
2003-09-08 Xavier Bru <xavier.bru@bull.net>
* Merge to 2.6.0-test4
2003-07-10 Xavier Bru <xavier.bru@bull.net>
* Merge kdb v4.3 to 2.5.72 ia64
* don't call local_bh_enable() with interrupts masked.
2003-04-07 Xavier Bru <xavier.bru@bull.net>
* Merge kdb v4.1 to 2.5.64 ia64
* new kernel parameters support
* new module format
* new kallsyms support
2003-12-02 Keith Owens <kaos@sgi.com>
* Use correct page alignment in kdb_get_one_user_page().
Prasanna S Panchamukhi, IBM.
* Split pte command into pte -m and pte -p. Dean Roe, SGI.
* kdb v4.3-2.4.23-common-2.
2003-12-01 Keith Owens <kaos@sgi.com>
* kdb v4.3-2.4.23-common-1.
2003-11-11 Keith Owens <kaos@sgi.com>
* Make KDB for USB keyboards build. Peter T. Breuer.
* Do not use USB keyboard if it has not been probed.
* kdb v4.3-2.4.23-rc1-common-1.
2003-10-10 Keith Owens <kaos@sgi.com>
* Sync with XFS 2.4.22 tree.
* kdb v4.3-2.4.22-common-2.
2003-08-29 Keith Owens <kaos@sgi.com>
* kdb v4.3-2.4.22-common-1.
2003-07-27 Keith Owens <kaos@sgi.com>
* kdb v4.3-2.4.22-pre8-common-8.
2003-07-20 Keith Owens <kaos@sgi.com>
* Make kdb_serial_str a common constant, the same for all consoles.
* Support SGI L1 console.
* kdb v4.3-2.4.21-common-8.
2003-07-14 Keith Owens <kaos@sgi.com>
* Correct ll command.
* kdb v4.3-2.4.21-common-7.
2003-07-08 Keith Owens <kaos@sgi.com>
* Export more kdb symbols. Vamsi Krishna S., IBM.
* kdb v4.3-2.4.21-common-6.
2003-07-07 Keith Owens <kaos@sgi.com>
* Tweak 'waiting for cpus' message.
* kdb v4.3-2.4.21-common-5.
2003-07-07 Keith Owens <kaos@sgi.com>
* 2.4.21-ia64-030702 patches common code that affects kdb. Workaround
this nuisance.
* kdb v4.3-2.4.21-common-4.
2003-06-24 Keith Owens <kaos@sgi.com>
* Add task and sigset commands. Mark Goodwin, SGI.
* kdb v4.3-2.4.21-common-3.
2003-06-23 Keith Owens <kaos@sgi.com>
* Sync with XFS 2.4.21 tree.
* kdb v4.3-2.4.21-common-2.
2003-06-20 Keith Owens <kaos@sgi.com>
* kdb v4.3-2.4.21-common-1.
2003-06-20 Keith Owens <kaos@sgi.com>
* More details on vm command, add vmp and pte commands.
Dean Nelson, Dean Roe, SGI.
* YAO1SCF (Yet Another O(1) Scheduler Coexistence Fix).
* Changes to common code to build on sparc. Tom Duffy.
* Move Tom Duffy's changes to drivers/sbus from the sparc64
patch to the common patch to keep all the serial changes
together.
* Changes to common code to build on Xscale. Eddie Dong, Intel.
* Remove CROSS_COMPILE_INC.
* Remove obsolete boot parameter 'kdb', long since replaced by
'kdb=on'.
* Remove obsolete kdb_eframe_t casts.
* Add CONFIG_KDB_CONTINUE_CATASTROPHIC.
* Wait a short interval for cpus to join kdb before proceeding.
* Automatically enable sysrq for sr command.
* Correct double free of kdb_printf lock, spotted by Richard Sanders.
* Add optional cpu parameter to btc command.
* kdb v4.3-2.4.20-common-1.
2003-05-02 Keith Owens <kaos@sgi.com>
* Some architectures have problems with the initial empty kallsyms
section so revert to three kallsyms passes.
* Flush buffered input at startup and at 'more' prompt.
* Only print 'more' prompt when longjmp data is available.
* Print more data for buffers and inodes.
* Disable kill command when O(1) scheduler is installed, the code
needs to be redone for O(1).
* The kernel has an undocumented assumption that enable_bh() is
always called with interrupts enabled, make it so.
* Print trailing punctuation even for symbols that are not in kernel.
* Add read/write access to user pages. Vamsi Krishna S., IBM
* Rename cpu_is_online to cpu_online, as in 2.5.
* O(1) scheduler removes init_task so kdb maintains its own list of
active tasks.
* Delete btp 0 <cpuid> option, it needed init_tasks.
* Clean up USB keyboard support. Steven Dake.
* Sync with XFS 2.4.20 tree.
* kdb v4.2-2.4.20-common-1.
2003-04-04 Keith Owens <kaos@sgi.com>
* Remove one kallsyms pass.
* Automatic detection of O(1) scheduler.
* Rename cpu_online to cpu_is_online.
* Workarounds for scheduler bugs.
* Tweak algorithm for detecting if cpu process data is available.
* Add 'kill' command. Sonic Zhang, Keith Owens.
* kdb v4.1-2.4.20-common-1.
2003-03-16 Keith Owens <kaos@sgi.com>
* Each cpu saves its state as it enters kdb or before it enters code
which cannot call kdb.
* Allow btp on process 0 for a specified cpu.
* Add btt command, backtrace given a struct task address.
* btc command no longer switches cpus, instead it uses the saved data.
* bta shows the idle task on each cpu as well as real tasks, the idle
task could be handling an interrupt.
* ps command shows the idle task on each cpu.
* ps checks that the saved data for a cpu matches the process running on
that cpu and warns about stale saved data or no saved data at all.
* Remove special cases for i386 backtrace from common code and simplify
common bt code.
* Clean up kdb interaction with CONFIG_SERIAL_CONSOLE.
* Do not automatically repeat commands after the user typed 'q'.
* O(1) scheduler patch changes the process cpu field but does not set
any indicator that O(1) is being used. Adjust kdb_process_cpu() by
hand after applying O(1).
* Add kdb_print_nameval() to common code.
* Convert tests of cpu_online_map to cpu_online() macro.
* module.h needs errno.h when compiling with CONFIG_MODULES=n.
* Correct duplicate breakpoint handling.
* Do not try to send IPI during a catastrophic error, send_ipi can hang
and take kdb with it.
* kdb memmap command is i386 only, restrict it.
* Add large block device (LBD) support from XFS tree. Eric Sandeen.
* kdb v4.0-2.4.20-common-1.
2003-02-03 Keith Owens <kaos@sgi.com>
* Register kdb commands early.
* Decode oops via kallsyms if it is available.
* Update copyright notices to 2003.
* Add defcmd/endefcmd to allow users to package their own macros.
* kdb commands that fail are ignored when prefixed with '-'.
* Add selection options to bta command.
* Add btc command (switch to each cpu and backtrace).
* Do real time detection of dead cpus.
* Clear ip adjusted flag when leaving kdb.
* Clean up ps command.
* Print ps output for each task when backtracing.
* Bump to version v3.0 to reduce confusion between kdb and kernel
version numbers.
* Add kdba_local_arch_setup/kdba_local_arch_cleanup to correct
keyboard freeze. Ashish Kalra.
* Refuse multiple breakpoints at the same address.
* Add fl (file_lock) command, from XFS development tree.
* Correct inode_pages, from XFS development tree.
* Add command history and editing. Sonic Zhang.
* Extend command history and editing to handle vt100 escape sequences.
* Allow tab completion at start of line.
* Touch nmi watchdog on long running bta and btc commands.
* Clean up ps output and standardize with bta codes.
* Correctly handle escaped characters in commands.
* Update man pages for btc and command history/editing.
* kdb v3.0-2.4.20-common-1.
2002-11-29 Keith Owens <kaos@sgi.com>
* Upgrade to 2.4.20.
* Correct Documentation/kdb/kdb_sr.man.
* Remove leading zeroes from pids, they are decimal, not octal.
* kdb v2.5-2.4.20-common-1.
2002-11-14 Keith Owens <kaos@sgi.com>
* Upgrade to 2.4.20-rc1.
* kdb v2.5-2.4.20-rc1-common-1.
2002-11-14 Keith Owens <kaos@sgi.com>
* Fix processing with O(1) scheduler.
* 'go' switches back to initial cpu first.
* 'go <address>' only allowed on initial cpu.
* 'go' installs the global breakpoints from the initial cpu before
releasing the other cpus.
* If 'go' has to single step over a breakpoint then it single steps just
the initial cpu, installs the global breakpoints then releases the
other cpus.
* General clean up of handling for breakpoints and single stepping over
software breakpoints.
* Add kdb_notifier_block so other code can tell when kdb is in control.
* kdb v2.5-2.4.19-common-1.
2002-11-02 Keith Owens <kaos@sgi.com>
* Correct build without CONFIG_KDB.
* kdb v2.4-2.4.19-common-3.
2002-11-01 Keith Owens <kaos@sgi.com>
* Minimize differences from 2.5.44.
* kdb v2.4-2.4.19-common-2.
2002-10-31 Keith Owens <kaos@sgi.com>
* Add defcmd/endefcmd feature.
* Remove kdb_eframe_t.
* Clear bp data before using.
* Sanity check if we have pt_regs.
* Force LINES > 1.
* Remove special case for KDB_REASON_PANIC, use KDB_ENTER() instead.
* Remove kdba_getcurrentframe().
* Coexist with O(1) scheduler.
* Add lines option to dmesg, speed up dmesg.
* kdb v2.4-2.4.19-common-1.
2002-10-17 Keith Owens <kaos@sgi.com>
* Add selection critera to ps and bta commands.
* kdb v2.3-2.4.19-common-4.
2002-10-07 Keith Owens <kaos@sgi.com>
* New man page, Documentation/kdb/kdb_sr.man.
2002-10-04 Keith Owens <kaos@sgi.com>
* Minimize differences between patches for 2.4 and 2.5 kernels.
* Add Configure.help for CONFIG_KDB_USB.
* Reduce stack usage.
* kdb v2.3-2.4.19-common-3.
2002-08-10 Keith Owens <kaos@sgi.com>
* Replace kdb_port with kdb_serial to support memory mapped I/O.
David Mosberger.
* kdb v2.3-2.4.19-common-2.
2002-08-07 Keith Owens <kaos@sgi.com>
* Upgrade to 2.4.19.
* Remove individual SGI copyrights, the general SGI copyright applies.
* Handle md0. Reported by Hugh Dickins, different fix by Keith Owens.
* Use page_address() in kdbm_pg.c. Hugh Dickins.
* Remove debugging printk from kdbm_pg.c. Hugh Dickins.
* Move breakpoint address verification into arch dependent code.
* Dynamically resize kdb command table as required.
* Common code to support USB keyboard. Sebastien Lelarge.
* kdb v2.3-2.4.19-common-1.
2002-07-09 Keith Owens <kaos@sgi.com>
* Upgrade to 2.4.19-rc1.
* Add dmesg command.
* Clean up copyrights, Eric Sandeen.
* kdb v2.2-2.4.19-rc1-common-1.
2002-06-14 Keith Owens <kaos@sgi.com>
* Upgrade to 2.4.19-pre10.
* Sync with XFS.
* kdb v2.1-2.4.19-pre10-common-1.
2002-04-09 Keith Owens <kaos@sgi.com>
* Upgrade to 2.4.19-pre6.
* kdb v2.1-2.4.19-pre6-common-1.
2002-03-18 Keith Owens <kaos@sgi.com>
* Syntax check mdWcN commands.
2002-03-01 Keith Owens <kaos@sgi.com>
* Sync with XFS 2.4.18.
* kdb v2.1-2.4.18-common-2.
2002-02-26 Keith Owens <kaos@sgi.com>
* Upgrade to 2.4.18.
* Add Paul Dorwin (IBM) magicpoint slides on using kdb as
Documentation/kdb/slides.
* kdb v2.1-2.4.18-common-1.
2002-01-23 Keith Owens <kaos@sgi.com>
* Sync with XFS pagebuf changes.
* kdb v2.1-2.4.17-common-2.
2002-01-18 Keith Owens <kaos@sgi.com>
* Ignore single stepping during panic.
* Remove kdba_getword, kdba_putword. Replace with kdb_getword,
kdb_putword that rely on copy_xx_user. The new functions return
an error code, like copy_xx_user.
* New functions kdb_getarea, kdb_putarea for copying areas of data
such as structures. These functions also return an error code.
* Change all common code to use the new functions.
* bp command checks that it can read and write the word at the
breakpoint before accepting the address.
* Break points are now set FIFO and cleared LIFO so overlapping
entries give sensible results.
* Verify address before disassembling code.
* Common changes for sparc64. Ethan Solomita, Tom Duffy.
* Remove ss <count>, never supported.
* Remove kallsyms entries from arch vmlinux.lds files.
* Specify which commands auto repeat.
* kdb v2.1-2.4.17-common-1.
2002-01-07 Keith Owens <kaos@sgi.com>
* Remove console semaphore code, not good in interrupt.
* Remove fragment of ia64 patch that had crept into kdb.
* Release as kdb v2.0-2.4.17-common-3.
2002-01-04 Keith Owens <kaos@sgi.com>
* Sync xfs <-> kdb common code.
2001-12-22 Keith Owens <kaos@sgi.com>
* Upgrade to 2.4.17.
* Clean up ifdef CONFIG_KDB.
* Add ifdef CONFIG_KDB around include kdb.h.
* Delete dummy kdb.h files for unsupported architectures.
* Delete arch i386 and ia64 specific files. This changelog now
applies to kdb common code only.
* Release as kdb v2.0-2.4.17-common-1.
2001-12-03 Keith Owens <kaos@sgi.com>
* Upgrade to 2.4.16.
* Add include/asm-um/kdb.h stub to allow XFS to be tested under UML.
* Check if an interrupt frame on i386 came from user space.
* Out of scope bug fix in kdb_id.c. Ethan Solomita.
* Changes to common code to support sparc64. Ethan Solomita.
* Change GFP_KERNEL to GFP_ATOMIC in disasm. Ethan Solomita.
2001-11-16 Keith Owens <kaos@sgi.com>
* Upgrade to 2.4.15-pre5.
* Wrap () around #define expressions with unary operators.
2001-11-13 Keith Owens <kaos@sgi.com>
* Upgrade to 2.4.15-pre4.
* kbdm_pg.c patch from Hugh Dickins.
2001-11-07 Keith Owens <kaos@sgi.com>
* Upgrade to 2.4.14-ia64-011105.
* Change name of l1 serial I/O routine, add ia64 init command. SGI.
* Sync kdbm_pg with XFS.
2001-11-06 Keith Owens <kaos@sgi.com>
* Upgrade to kernel 2.4.14.
2001-11-02 Keith Owens <kaos@sgi.com>
* Sync kdbm_pg.c with XFS.
2001-10-24 Keith Owens <kaos@sgi.com>
* Upgrade to kernel 2.4.13.
2001-10-14 Keith Owens <kaos@melbourne.sgi.com>
* More use of TMPPREFIX in top level Makefile to speed up NFS compiles.
* Correct repeat calculations in md/mds commands.
2001-10-10 Keith Owens <kaos@melbourne.sgi.com>
* Copy bfd.h and ansidecl.h to arch/$(ARCH)/kdb, remove dependecies on
user space includes.
* Update kdb v1.9 to kernel 2.4.11.
2001-10-01 Keith Owens <kaos@melbourne.sgi.com>
* Update kdb v1.9 to kernel 2.4.11-pre1 and 2.4.10-ac1.
* Correct loop in kdb_parse, reported by Tachino Nobuhiro.
2001-09-25 Keith Owens <kaos@melbourne.sgi.com>
* Update kdb v1.8 to kernel 2.4.10.
* kdbm_pg patch from Hugh Dickens.
* DProbes patch from Bharata B Rao.
* mdWcn and mmW patch from Vamsi Krishna S.
* i386 disasm layout patch from Jean-Marc Saffroy.
* Work around for 64 bit binutils, Simon Munton.
* kdb.mm doc correction by Chris Pascoe.
* Enter repeats the last command, IA64 disasm only prints one
instruction. Don Dugger.
* Allow kdb/modules to be linked into vmlinux.
* Remove obsolete code from kdb/modules/kdbm_{pg,vm}.c.
* Warn when commands are entered at more prompt.
* Add MODULE_AUTHOR, DESCRIPTION, LICENSE.
* Release as kdb v1.9.
2001-02-27 Keith Owens <kaos@melbourne.sgi.com>
* Update kdb v1.8 to kernel 2.4.2, sync kdb/modules with XFS.
* Hook into panic() call.
2000-12-18 Keith Owens <kaos@melbourne.sgi.com>
* Update kdb v1.7 to kernel 2.4.0-test13-pre3, sync kdb/modules with
XFS.
2000-11-18 Keith Owens <kaos@melbourne.sgi.com>
* Update to kernel 2.4.0-test11-pre7, including forward port of
bug fixes from WIP 2.4.0-test9 tree.
* Update to Cygnus CVS trees for disassembly code.
* Bump to kdb v1.6.
2000-10-19 Keith Owens <kaos@melbourne.sgi.com>
* Update to kernel 2.4.0-test10-pre4.
2000-10-15 Keith Owens <kaos@melbourne.sgi.com>
* kdb/kdbmain.c (kdb_parse): Correctly handle blank input.
* kdb/kdbmain.c (kdb_local, kdb): Reason SILENT can have NULL regs.
2000-10-13 Keith Owens <kaos@melbourne.sgi.com>
* kdb/kdbmain.c: Reduce CMD_LEN to avoid overflowing kdb_printf buffer.
2000-10-11 Keith Owens <kaos@melbourne.sgi.com>
* kdb/kdbmain.c (kdb): Test for userspace breakpoints before driving
other cpus into kdb. Speeds up gdb and avoids SMP race.
* arch/i386/kdb/kdba_io.c (get_serial_char, get_kbd_char): Ignore
unprintable characters.
* arch/i386/kdb/kdba_io.c (kdba_read): Better handling of buffer size.
2000-10-04 Keith Owens <kaos@melbourne.sgi.com>
* arch/i386/kdb/kdba_bt.c (kdba_bt_process): Verify that esp is inside
task_struct. Original patch by Mike Galbraith.
* kdb/kdb_io.c (kdb_getstr): Reset output line counter, remove
unnecessary prompts.
* arch/i386/kdb/kdbasupport.c (kdb_getregcontents): Change " cs" to
"xcs", ditto ss, ds, es. gdb2kdb does not like leading spaces.
* include/asm-xxx/kdb.h: Add dummy kdb.h for all architectures except
ix86. This allows #include <linux/kdb.h> to appear in arch independent
code without causing compile errors.
* kdb/modules/kdbm_pg: Sync with XFS.
2000-10-03 Keith Owens <kaos@melbourne.sgi.com>
* kdb/kdb_io.c (kdb_read): Ignore NMI while waiting for input.
* kdb/kdb_io.c, kdb/Makefile: Export kdb_read.
2000-10-02 Keith Owens <kaos@melbourne.sgi.com>
* arch/i386/kernel/smpboot.c (do_boot_cpu): Set nmi_watchdog_source to 2
to avoid premature NMI oops during cpu bring up. We have to assume that
a box with more than 1 cpu has a working IO-APIC.
* Documentation/kdb/{kdb.mm,kdb_md.man}: Add mdr command.
* kdb/kdbmain.c (kdb_md): Add mdr command.
* Release as kdb v1.5 against 2.4.0-test9-pre8.
* arch/i386/kdb/kdba_io.c, arch/i386/kdb/kdbasupport.c, kdb/kdbmain.c,
kdb/kdb_io.c, kdb/kdb_id.c: Remove zero initializers for static
variables.
2000-09-28 Keith Owens <kaos@melbourne.sgi.com>
* various: Add nmi_watchdog_source, 1 local APIC, 2 IO-APIC.
Test nmi_watchdog_source instead of nr_ioapics so UP works on SMP hardware.
* arch/i386/kernel/io_apic.c: Rename setup_nmi to setup_nmi_io for clarity.
* kdb/kdbmain.c (kdb_parse): Only set NO_WATCHDOG if it was already set.
* kdb/kdbmain.c (kdb): Clear NO_WATCHDOG on all exit paths.
* include/linux/kdb.h: Add KDB_REASON_SILENT.
* kdb/kdbmain.c (kdb_local): Treat reason SILENT as immediate 'go'.
* kdb/kdbmain.c (kdb_init): Invoke kdb with reason SILENT to instantiate
any breakpoints on boot cpu.
* arch/i386/kernel/smpboot.c (smp_callin): Invoke kdb with reason SILENT
to instantiate any global breakpoints on this cpu.
* kdb/kdb_cmds: Remove comment that said initial commands only worked on
boot cpu.
2000-09-27 Keith Owens <kaos@melbourne.sgi.com>
* arch/i386/kernel/msr.c: Move {rd,wr}msr_eio to include/asm-i386/apic.h.
* include/asm-i386/apic.h: Define NMI interfaces.
* kernel/sysctl.c (kern_table):
* kernel/sysctl.c (do_proc_set_nmi_watchdog):
Add /proc/sys/kernel/nmi_watchdog.
* arch/i386/kernel/apic.c: New routines set_nmi_counter_local,
setup_apic_nmi_watchdog.
* arch/i386/kernel/traps.c: New routine set_nmi_watchdog(). Call apic
routines to set/clear local apic timer.
2000-09-26 Keith Owens <kaos@melbourne.sgi.com>
* include/linux/sysctl.h (enum): Add NMI_WATCHDOG.
* arch/i386/kernel/traps.c (nmi_watchdog_tick): Check nmi_watchdog is
still on.
* arch/i386/config.in: Add CONFIG_UP_NMI_WATCHDOG.
* Documentation/Configure.help: Add CONFIG_UP_NMI_WATCHDOG.
* Documentation/nmi_watchdog.txt: Update for UP NMI watchdog.
2000-09-25 Keith Owens <kaos@melbourne.sgi.com>
* arch/i386/kernel/apic.c (init_apic_mappings):
* arch/i386/kernel/io_apic.c (IO_APIC_init_uniprocessor):
Merge Keir Fraser's local APIC for uniprocessors patch.
2000-09-24 Keith Owens <kaos@melbourne.sgi.com>
* Various: Declare initialization routines as __init.
* Makefile: Define and export AWK.
* kdb/Makefile: Generate gen-kdb_cmds.c from kdb/kdb_cmds.
* kdb/kdbmain.c (kdb_init): Call new routine kdb_cmds_init to execute
whatever the user put in kdb/kdb_cmds.
* arch/i386/kdb/kdba_bt.c (kdba_bt_stack): New parameter to
indicate if esp in regs is known to be valid or not.
* kdb/kdb_bp.c, arch/i386/kdb/kdba_bp.c: More trace prints for
breakpoint handling.
* arch/i386/kdb/kdba_bp.c (kdba_installbp): Finally found and fixed the
annoying breakpoint bug where breakpoints where not always installed
after 'go'.
* Documentation/kdb: Update man pages kdb.mm, kdb_env.man, kdb_ss.man.
* Released as kdb-v1.5-beta1-2.4.0-test8.
* Sync to 2.4.0-test9-pre6 and release as kdb-v1.5-beta1-2.4.0-test9-pre6.
2000-09-23 Keith Owens <kaos@melbourne.sgi.com>
* arch/i386/kdb/kdbasupport.c (kdba_getregcontents): New pseudo
registers cesp and ceflags to help with debugging the debugger.
* kdb/kdbmain.c (kdb_local, kdb): Add KDB_REASON_RECURSE. Add
environment variable RECURSE. Add code to cope with some types of
recursion.
* kdb/kdbmain.c (kdb), arch/i386/kdba/kdba_bp.c: Add
kdba_clearsinglestep.
2000-09-22 Keith Owens <kaos@melbourne.sgi.com>
* drivers/video/vgacon.c (write_vga): No cli() if kdb is running, avoid
console deadlock.
* arch/i386/kernel/irq.c (get_irqlock): Warn if kdb is running, may hang.
* include/linux/kdb.h: Define KDB_IS_RUNNING as (0) if no CONFIG_KDB.
* arch/i386/kdb/kdba_bt.c (kdba_bt_stack): Do not attempt a backtrace if
the code segment is not in the kernel.
* kdb/modules: Change modules from MX_OBJS to M_OBJS. Remove EXPORT_NOSYMBOLS.
2000-09-21 Keith Owens <kaos@melbourne.sgi.com>
* arch/i386/kernel/i386_ksyms.c: Move EXPORT_SYMBOLS for kdb to kdb/kdbmain.c.
* kdb/Makefile: Change kdb/kdbmain.o from O_OBJS to OX_OBJS.
* arch/i386/kernel/smp.c: Remove some #ifdef CONFIG_KDB. Remove kdbprivate.h.
* include/linux/kdb.h: Add kdb_print_state. Add KDB_STATE_WAIT_IPI.
* kdb/kdbmain.c (kdb): Only mark cpu as leaving if it is in KDB state. Maintain
WAIT_IPI state so a cpu is only driven through NMI once.
* arch/i386/kernel/smp.c (smp_kdb_stop): All state fiddling moved to kdb().
2000-09-20 Keith Owens <kaos@melbourne.sgi.com>
* include/linux/kdb.h: #define kdb() as (0) if kdb is not configured.
* arch/i386/kernel/traps.c: Remove some #ifdef CONFIG_KDB.
* include/linux/kdbprivate.h: Move per cpu state to kdb.h.
* include/linux/kdb.h: Add KDB_STATE_NO_WATCHDOG, KDB_STATE_PRINTF_LOCK.
Rename KDB_DEBUG_xxx to KDB_DEBUG_FLAG_xxx. Clean up debug flag
definitions.
* arch/i386/kernel/traps.c (nmi_watchdog_tick): Check no watchdog.
* kdb/kdbmain.c (kdb): Set no watchdog in normal kdb code.
* kdb/kdbmain.c (kdb_parse): Allow watchdog in commands.
* kdb/kdb_io.c (kdb_printf): No watchdog during printing. Clean up lock handling.
* kdb/kdbmain.c (kdb_set): Clean up debug flag handling.
2000-09-19 Juan J. Quintela <quintela@fi.udc.es>
* kdb/arch/i386/kdb/kdba_io.c: Allow kdb to compile without CONFIG_VT and/or
serial console.
2000-09-19 Keith Owens <kaos@melbourne.sgi.com>
* include/linux/kdb.h: Define KDB_DEBUG_STATE().
* kdb/kdbmain.c (kdb): Add kdb_print_state(), calls to KDB_DEBUG_STATE().
2000-09-16 Keith Owens <kaos@melbourne.sgi.com>
* Move to finer grained control over individual processors in kdb with
per cpu kdb state. Needed to allow ss[b] to only release one processor,
previously ss[b] released all processors. Also need to recover from
errors inside kdb commands, e.g. oops in kdbm_pg code.
* various:
Move global flags KDB_FLAG_SSB, KDB_FLAG_SUPRESS, KDB_FLAG_FAULT,
KDB_FLAG_SS, KDB_FLAG_SSBPT, kdb_active, to per cpu state and macros
KDB_STATE(xxx).
Replace kdb_flags & KDB_FLAG_xxx with KDB_FLAG(xxx).
Replace kdb_flags & KDB_DEBUG_xxx with KDB_DEBUG(xxx).
Replace specific tests with wrapper KDB_IS_RUNNING().
* various: Remove #ifdef CONFIG_SMP from kdb code wherever
possible. Simplifies the code and makes it much more readable.
* arch/i386/kdb/kdbasupport.c (kdb_setjmp): Record if we have reliable
longjmp data instead of assuming it is always set.
* various: Replace smp_kdb_wait with per cpu state, HOLD_CPU.
* init/main.c : Replace #ifdef KDB_DEBUG with KDB_DEBUG(CALLBACK).
* include/linux/kdbprivate.h: Separate command return codes from error
codes. Add more detailed command codes.
* arch/i386/kernel/traps.c (die): Change spin_lock_irq to
spin_lock_irqsave. Why did I do this?
* kdb/kdbmain.c (kdb_parse): Set per cpu flag CMD before executing kdb
command. More detailed return codes for commands that affect
processors.
* kdb/kdbmain.c (kdb_previous_event): New, check if any processors are
still executing the previous kdb event. Removes a race window where a
second event could enter kdb before the first had completely ended.
* kdb/kdbmain.c (kdb): Document all the concurrency conditions and how
kdb handles them. ss[b] now releases only the current cpu. Do not set
breakpoints when releasing for ss[b]. Recover from errors in kdb
commands. Check that we have reliable longjmp data before using it.
* various: Update return code documentation.
* kdb/kdb_bp.c (kdb_ss): Separate ss and ssb return codes.
* kdb/kdbsupport.c (kdb_ipi): Finer grained algorithm for deciding
whether to call send a stop signal to a cpu.
* arch/i386/kdb/kdba_bp.c (kdba_db_trap): Separate ss and ssb return
codes. Reinstall delayed software breakpoints per cpu instead of
globally. Changed algorithm for handling ss[b].
* arch/i386/kdb/kdba_bp.c (kdba_bp_trap): Match software breakpoints per
cpu instead of globally.
* include/linux/kdb.h: Bump version to kdb v1.5.
2000-09-16 Keith Owens <kaos@melbourne.sgi.com>
* kernel/sysctl.c (kern_table): add /proc/sys/kernel/kdb.
* init/main.c (parse_options): add boot flags kdb=on, kdb=off,
kdb=early.
* include/linux/sysctl.h (enum): add KERN_KDB.
* drivers/char/serial.c (receive_chars): check kdb_on.
* drivers/char/keyboard.c (handle_scancode): check kdb_on.
* arch/i386/kernel/traps.c (nmi_watchdog_tick): check kdb_on.
* arch/i386/config.in: add CONFIG_KDB_OFF.
* Documentation/Configure.help: add CONFIG_KDB_OFF.
* kdb/kdbmain.c: add kdb_initial_cpu, kdb_on.
* kdb/kdbmain.c (kdb): check kdb_on, set kdb_initial_cpu.
* kdb/kdbmain.c (kdb_init): add Keith Owens to kdb banner.
* kdb/kdb_io.c (kdb_printf): serialize kdb_printf output.
* kdb/kdb_bt.c (kdb_bt): check environment variable BTAPROMPT.
* kdb/kdbsupport.c (kdb_ipi): ignore NMI for kdb_initial_cpu.
* kdb/modules/kdbm_pg.c (kdbm_page): merge updates from 2.4.0-test5-xfs.
* kdb/kdb_bt.man: add btp, bta, BTAPROMPT.
* kdb/kdb.mm: add CONFIG_KDB_OFF, boot flags, btp, bta.
* include/linux/kdbprivate.h: add kdb_initial_cpu.
* include/linux/kdb.h: add kdb_on, bump version to kdb v1.4.
![[BACK]](/icons/back.gif){kind=icon}
Return to ChangeLog CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [Development] / linux-2.6-xfs / kdb