File: [Development] / linux-2.6-xfs / drivers / usb / host / Attic / hc_sl811.c (download)
Revision 1.2, Fri Oct 1 15:10:15 2004 UTC (13 years ago) by nathans.longdrop.melbourne.sgi.com
Branch: MAIN
Changes since 1.1: +4 -4
lines
Upgrade kernel to 2.6.9-rc3 and kdb to 4.4
Merge of 2.6.x-xfs-melb:linux:19628a by kenmcd.
|
/*-------------------------------------------------------------------------*/
/*-------------------------------------------------------------------------*
* SL811HS USB HCD for Linux Version 0.1 (10/28/2001)
*
* requires (includes) hc_simple.[hc] simple generic HCD frontend
*
* COPYRIGHT(C) 2001 by CYPRESS SEMICONDUCTOR INC.
*
*-------------------------------------------------------------------------*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*-------------------------------------------------------------------------*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/smp_lock.h>
#include <linux/list.h>
#include <linux/ioport.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <linux/usb.h>
#include "../core/hcd.h"
#undef HC_URB_TIMEOUT
#undef HC_SWITCH_INT
#undef HC_ENABLE_ISOC
#define SL811_DEBUG_ERR
#ifdef SL811_DEBUG_ERR
#define DBGERR(fmt, args...) printk(fmt,## args)
#else
#define DBGERR(fmt, args...)
#endif
#ifdef SL811_DEBUG
#define DBG(fmt, args...) printk(fmt,## args)
#else
#define DBG(fmt, args...)
#endif
#ifdef SL811_DEBUG_FUNC
#define DBGFUNC(fmt, args...) printk(fmt,## args)
#else
#define DBGFUNC(fmt, args...)
#endif
#ifdef SL811_DEBUG_DATA
#define DBGDATAR(fmt, args...) printk(fmt,## args)
#define DBGDATAW(fmt, args...) printk(fmt,## args)
#else
#define DBGDATAR(fmt, args...)
#define DBGDATAW(fmt, args...)
#endif
#ifdef SL811_DEBUG_VERBOSE
#define DBGVERBOSE(fmt, args...) printk(fmt,## args)
#else
#define DBGVERBOSE(fmt, args...)
#endif
#define TRUE 1
#define FALSE 0
#define HC_SWITCH_INT
#include "hc_sl811.h"
#include "hc_simple.h"
static int urb_debug = 0;
#include "hc_simple.c"
#include "hc_sl811_rh.c"
/* The base_addr, data_reg_addr, and irq number are board specific.
* The current values are design to run on the Accelent SA1110 IDP
* NOTE: values need to modify for different development boards
*/
static int base_addr = 0xd3800000;
static int data_reg_addr = 0xd3810000;
static int irq = 34;
/* forware declaration */
int SL11StartXaction (hci_t * hci, __u8 addr, __u8 epaddr, int pid, int len,
int toggle, int slow, int urb_state);
static int sofWaitCnt = 0;
module_param(urb_debug, int, 0);
MODULE_PARM_DESC (urb_debug, "debug urb messages, default is 0 (no)");
module_param(base_addr, int, 0);
MODULE_PARM_DESC (base_addr, "sl811 base address 0xd3800000");
module_param(data_reg_addr, int, 0);
MODULE_PARM_DESC (data_reg_addr, "sl811 data register address 0xd3810000");
module_param(irq, int, 0);
MODULE_PARM_DESC (irq, "IRQ 34 (default)");
static int hc_reset (hci_t * hci);
/***************************************************************************
* Function Name : SL811Read
*
* Read a byte of data from the SL811H/SL11H
*
* Input: hci = data structure for the host controller
* offset = address of SL811/SL11H register or memory
*
* Return: data
**************************************************************************/
char SL811Read (hci_t * hci, char offset)
{
hcipriv_t *hp = &hci->hp;
char data;
writeb (offset, hp->hcport);
wmb ();
data = readb (hp->hcport2);
rmb ();
return (data);
}
/***************************************************************************
* Function Name : SL811Write
*
* Write a byte of data to the SL811H/SL11H
*
* Input: hci = data structure for the host controller
* offset = address of SL811/SL11H register or memory
* data = the data going to write to SL811H
*
* Return: none
**************************************************************************/
void SL811Write (hci_t * hci, char offset, char data)
{
hcipriv_t *hp = &hci->hp;
writeb (offset, hp->hcport);
writeb (data, hp->hcport2);
wmb ();
}
/***************************************************************************
* Function Name : SL811BufRead
*
* Read consecutive bytes of data from the SL811H/SL11H buffer
*
* Input: hci = data structure for the host controller
* offset = SL811/SL11H register offset
* buf = the buffer where the data will store
* size = number of bytes to read
*
* Return: none
**************************************************************************/
void SL811BufRead (hci_t * hci, short offset, char *buf, short size)
{
hcipriv_t *hp = &hci->hp;
if (size <= 0)
return;
writeb ((char) offset, hp->hcport);
wmb ();
DBGDATAR ("SL811BufRead: offset = 0x%x, data = ", offset);
while (size--) {
*buf++ = (char) readb (hp->hcport2);
DBGDATAR ("0x%x ", *(buf - 1));
rmb ();
}
DBGDATAR ("\n");
}
/***************************************************************************
* Function Name : SL811BufWrite
*
* Write consecutive bytes of data to the SL811H/SL11H buffer
*
* Input: hci = data structure for the host controller
* offset = SL811/SL11H register offset
* buf = the data buffer
* size = number of bytes to write
*
* Return: none
**************************************************************************/
void SL811BufWrite (hci_t * hci, short offset, char *buf, short size)
{
hcipriv_t *hp = &hci->hp;
if (size <= 0)
return;
writeb ((char) offset, hp->hcport);
wmb ();
DBGDATAW ("SL811BufWrite: offset = 0x%x, data = ", offset);
while (size--) {
DBGDATAW ("0x%x ", *buf);
writeb (*buf, hp->hcport2);
wmb ();
buf++;
}
DBGDATAW ("\n");
}
/***************************************************************************
* Function Name : regTest
*
* This routine test the Read/Write functionality of SL811HS registers
*
* 1) Store original register value into a buffer
* 2) Write to registers with a RAMP pattern. (10, 11, 12, ..., 255)
* 3) Read from register
* 4) Compare the written value with the read value and make sure they are
* equivalent
* 5) Restore the original register value
*
* Input: hci = data structure for the host controller
*
*
* Return: TRUE = passed; FALSE = failed
**************************************************************************/
int regTest (hci_t * hci)
{
int i, data, result = TRUE;
char buf[256];
DBGFUNC ("Enter regTest\n");
for (i = 0x10; i < 256; i++) {
/* save the original buffer */
buf[i] = (char) SL811Read (hci, i);
/* Write the new data to the buffer */
SL811Write (hci, i, i);
}
/* compare the written data */
for (i = 0x10; i < 256; i++) {
data = SL811Read (hci, i);
if (data != i) {
DBGERR ("Pattern test failed!! value = 0x%x, s/b 0x%x\n",
data, i);
result = FALSE;
}
}
/* restore the data */
for (i = 0x10; i < 256; i++) {
SL811Write (hci, i, buf[i]);
}
return (result);
}
/***************************************************************************
* Function Name : regShow
*
* Display all SL811HS register values
*
* Input: hci = data structure for the host controller
*
* Return: none
**************************************************************************/
void regShow (hci_t * hci)
{
int i;
for (i = 0; i < 256; i++) {
printk ("offset %d: 0x%x\n", i, SL811Read (hci, i));
}
}
/************************************************************************
* Function Name : USBReset
*
* This function resets SL811HS controller and detects the speed of
* the connecting device
*
* Input: hci = data structure for the host controller
*
* Return: 0 = no device attached; 1 = USB device attached
*
***********************************************************************/
static int USBReset (hci_t * hci)
{
int status;
hcipriv_t *hp = &hci->hp;
DBGFUNC ("enter USBReset\n");
SL811Write (hci, SL11H_CTLREG2, 0xae);
// setup master and full speed
SL811Write (hci, SL11H_CTLREG1, 0x08); // reset USB
mdelay (20); // 20ms
SL811Write (hci, SL11H_CTLREG1, 0); // remove SE0
for (status = 0; status < 100; status++)
SL811Write (hci, SL11H_INTSTATREG, 0xff); // clear all interrupt bits
status = SL811Read (hci, SL11H_INTSTATREG);
if (status & 0x40) // Check if device is removed
{
DBG ("USBReset: Device removed\n");
SL811Write (hci, SL11H_INTENBLREG,
SL11H_INTMASK_XFERDONE | SL11H_INTMASK_SOFINTR |
SL11H_INTMASK_INSRMV);
hp->RHportStatus->portStatus &=
~(PORT_CONNECT_STAT | PORT_ENABLE_STAT);
return 0;
}
SL811Write (hci, SL11H_BUFLNTHREG_B, 0); //zero lenth
SL811Write (hci, SL11H_PIDEPREG_B, 0x50); //send SOF to EP0
SL811Write (hci, SL11H_DEVADDRREG_B, 0x01); //address0
SL811Write (hci, SL11H_SOFLOWREG, 0xe0);
if (!(status & 0x80)) {
/* slow speed device connect directly to root-hub */
DBG ("USBReset: low speed Device attached\n");
SL811Write (hci, SL11H_CTLREG1, 0x8);
mdelay (20);
SL811Write (hci, SL11H_SOFTMRREG, 0xee);
SL811Write (hci, SL11H_CTLREG1, 0x21);
/* start the SOF or EOP */
SL811Write (hci, SL11H_HOSTCTLREG_B, 0x01);
hp->RHportStatus->portStatus |=
(PORT_CONNECT_STAT | PORT_LOW_SPEED_DEV_ATTACH_STAT);
/* clear all interrupt bits */
for (status = 0; status < 20; status++)
SL811Write (hci, SL11H_INTSTATREG, 0xff);
} else {
/* full speed device connect directly to root hub */
DBG ("USBReset: full speed Device attached\n");
SL811Write (hci, SL11H_CTLREG1, 0x8);
mdelay (20);
SL811Write (hci, SL11H_SOFTMRREG, 0xae);
SL811Write (hci, SL11H_CTLREG1, 0x01);
/* start the SOF or EOP */
SL811Write (hci, SL11H_HOSTCTLREG_B, 0x01);
hp->RHportStatus->portStatus |= (PORT_CONNECT_STAT);
hp->RHportStatus->portStatus &= ~PORT_LOW_SPEED_DEV_ATTACH_STAT;
/* clear all interrupt bits */
SL811Write (hci, SL11H_INTSTATREG, 0xff);
}
/* enable all interrupts */
SL811Write (hci, SL11H_INTENBLREG,
SL11H_INTMASK_XFERDONE | SL11H_INTMASK_SOFINTR |
SL11H_INTMASK_INSRMV);
return 1;
}
/*-------------------------------------------------------------------------*/
/* tl functions */
static inline void hc_mark_last_trans (hci_t * hci)
{
hcipriv_t *hp = &hci->hp;
__u8 *ptd = hp->tl;
dbg ("enter hc_mark_last_trans\n");
if (ptd == NULL) {
printk ("hc_mark_last_trans: ptd = null\n");
return;
}
if (hp->xferPktLen > 0)
*(ptd + hp->tl_last) |= (1 << 3);
}
static inline void hc_flush_data_cache (hci_t * hci, void *data, int len)
{
}
/************************************************************************
* Function Name : hc_add_trans
*
* This function sets up the SL811HS register and transmit the USB packets.
*
* 1) Determine if enough time within the current frame to send the packet
* 2) Load the data into the SL811HS register
* 3) Set the appropriate command to the register and trigger the transmit
*
* Input: hci = data structure for the host controller
* len = data length
* data = transmitting data
* toggle = USB toggle bit, either 0 or 1
* maxps = maximum packet size for this endpoint
* slow = speed of the device
* endpoint = endpoint number
* address = USB address of the device
* pid = packet ID
* format =
* urb_state = the current stage of USB transaction
*
* Return: 0 = no time left to schedule the transfer
* 1 = success
*
***********************************************************************/
static inline int hc_add_trans (hci_t * hci, int len, void *data, int toggle,
int maxps, int slow, int endpoint, int address,
int pid, int format, int urb_state)
{
hcipriv_t *hp = &hci->hp;
__u16 speed;
int ii, jj, kk;
DBGFUNC ("enter hc_addr_trans: len =0x%x, toggle:0x%x, endpoing:0x%x,"
" addr:0x%x, pid:0x%x,format:0x%x\n", len, toggle, endpoint,
i address, pid, format);
if (len > maxps) {
len = maxps;
}
speed = hp->RHportStatus->portStatus;
if (speed & PORT_LOW_SPEED_DEV_ATTACH_STAT) {
// ii = (8*7*8 + 6*3) * len + 800;
ii = 8 * 8 * len + 1024;
} else {
if (slow) {
// ii = (8*7*8 + 6*3) * len + 800;
ii = 8 * 8 * len + 2048;
} else
// ii = (8*7 + 6*3)*len + 110;
ii = 8 * len + 256;
}
ii += 2 * 10 * len;
jj = SL811Read (hci, SL11H_SOFTMRREG);
kk = (jj & 0xFF) * 64 - ii;
if (kk < 0) {
DBGVERBOSE
("hc_add_trans: no bandwidth for schedule, ii = 0x%x,"
"jj = 0x%x, len =0x%x, active_trans = 0x%x\n", ii, jj, len,
hci->active_trans);
return (-1);
}
if (pid != PID_IN) {
/* Load data into hc */
SL811BufWrite (hci, SL11H_DATA_START, (__u8 *) data, len);
}
/* transmit */
SL11StartXaction (hci, (__u8) address, (__u8) endpoint, (__u8) pid, len,
toggle, slow, urb_state);
return len;
}
/************************************************************************
* Function Name : hc_parse_trans
*
* This function checks the status of the transmitted or received packet
* and copy the data from the SL811HS register into a buffer.
*
* 1) Check the status of the packet
* 2) If successful, and IN packet then copy the data from the SL811HS register
* into a buffer
*
* Input: hci = data structure for the host controller
* actbytes = pointer to actual number of bytes
* data = data buffer
* cc = packet status
* length = the urb transmit length
* pid = packet ID
* urb_state = the current stage of USB transaction
*
* Return: 0
***********************************************************************/
static inline int hc_parse_trans (hci_t * hci, int *actbytes, __u8 * data,
int *cc, int *toggle, int length, int pid,
int urb_state)
{
__u8 addr;
__u8 len;
DBGFUNC ("enter hc_parse_trans\n");
/* get packet status; convert ack rcvd to ack-not-rcvd */
*cc = (int) SL811Read (hci, SL11H_PKTSTATREG);
if (*cc &
(SL11H_STATMASK_ERROR | SL11H_STATMASK_TMOUT | SL11H_STATMASK_OVF |
SL11H_STATMASK_NAK | SL11H_STATMASK_STALL)) {
if (*cc & SL11H_STATMASK_OVF)
DBGERR ("parse trans: error recv ack, cc = 0x%x, TX_BASE_Len = "
"0x%x, TX_count=0x%x\n", *cc,
SL811Read (hci, SL11H_BUFLNTHREG),
SL811Read (hci, SL11H_XFERCNTREG));
} else {
DBGVERBOSE ("parse trans: recv ack, cc = 0x%x, len = 0x%x, \n",
*cc, length);
/* Successful data */
if ((pid == PID_IN) && (urb_state != US_CTRL_SETUP)) {
/* Find the base address */
addr = SL811Read (hci, SL11H_BUFADDRREG);
/* Find the Transmit Length */
len = SL811Read (hci, SL11H_BUFLNTHREG);
/* The actual data length = xmit length reg - xfer count reg */
*actbytes = len - SL811Read (hci, SL11H_XFERCNTREG);
if ((data != NULL) && (*actbytes > 0)) {
SL811BufRead (hci, addr, data, *actbytes);
} else if ((data == NULL) && (*actbytes <= 0)) {
DBGERR ("hc_parse_trans: data = NULL or actbyte = 0x%x\n",
*actbytes);
return 0;
}
} else if (pid == PID_OUT) {
*actbytes = length;
} else {
// printk ("ERR:parse_trans, pid != IN or OUT, pid = 0x%x\n", pid);
}
*toggle = !*toggle;
}
return 0;
}
/************************************************************************
* Function Name : hc_start_int
*
* This function enables SL811HS interrupts
*
* Input: hci = data structure for the host controller
*
* Return: none
***********************************************************************/
static void hc_start_int (hci_t * hci)
{
#ifdef HC_SWITCH_INT
int mask =
SL11H_INTMASK_XFERDONE | SL11H_INTMASK_SOFINTR |
SL11H_INTMASK_INSRMV | SL11H_INTMASK_USBRESET;
SL811Write (hci, IntEna, mask);
#endif
}
/************************************************************************
* Function Name : hc_stop_int
*
* This function disables SL811HS interrupts
*
* Input: hci = data structure for the host controller
*
* Return: none
***********************************************************************/
static void hc_stop_int (hci_t * hci)
{
#ifdef HC_SWITCH_INT
SL811Write (hci, SL11H_INTSTATREG, 0xff);
// SL811Write(hci, SL11H_INTENBLREG, SL11H_INTMASK_INSRMV);
#endif
}
/************************************************************************
* Function Name : handleInsRmvIntr
*
* This function handles the insertion or removal of device on SL811HS.
* It resets the controller and updates the port status
*
* Input: hci = data structure for the host controller
*
* Return: none
***********************************************************************/
void handleInsRmvIntr (hci_t * hci)
{
hcipriv_t *hp = &hci->hp;
USBReset (hci);
/* Changes in connection status */
hp->RHportStatus->portChange |= PORT_CONNECT_CHANGE;
/* Port Enable or Disable */
if (hp->RHportStatus->portStatus & PORT_CONNECT_STAT) {
/* device is connected to the port:
* 1) Enable port
* 2) Resume ??
*/
// hp->RHportStatus->portChange |= PORT_ENABLE_CHANGE;
/* Over Current is not supported by the SL811 HW ?? */
/* How about the Port Power ?? */
} else {
/* Device has disconnect:
* 1) Disable port
*/
hp->RHportStatus->portStatus &= ~(PORT_ENABLE_STAT);
hp->RHportStatus->portChange |= PORT_ENABLE_CHANGE;
}
}
/*****************************************************************
*
* Function Name: SL11StartXaction
*
* This functions load the registers with appropriate value and
* transmit the packet.
*
* Input: hci = data structure for the host controller
* addr = USB address of the device
* epaddr = endpoint number
* pid = packet ID
* len = data length
* toggle = USB toggle bit, either 0 or 1
* slow = speed of the device
* urb_state = the current stage of USB transaction
*
* Return: 0 = error; 1 = successful
*
*****************************************************************/
int SL11StartXaction (hci_t * hci, __u8 addr, __u8 epaddr, int pid, int len,
int toggle, int slow, int urb_state)
{
hcipriv_t *hp = &hci->hp;
__u8 cmd = 0;
__u8 setup_data[4];
__u16 speed;
speed = hp->RHportStatus->portStatus;
if (!(speed & PORT_LOW_SPEED_DEV_ATTACH_STAT) && slow) {
cmd |= SL11H_HCTLMASK_PREAMBLE;
}
switch (pid) {
case PID_SETUP:
cmd &= SL11H_HCTLMASK_PREAMBLE;
cmd |=
(SL11H_HCTLMASK_ARM | SL11H_HCTLMASK_ENBLEP |
SL11H_HCTLMASK_WRITE);
break;
case PID_OUT:
cmd &= (SL11H_HCTLMASK_SEQ | SL11H_HCTLMASK_PREAMBLE);
cmd |=
(SL11H_HCTLMASK_ARM | SL11H_HCTLMASK_ENBLEP |
SL11H_HCTLMASK_WRITE);
if (toggle) {
cmd |= SL11H_HCTLMASK_SEQ;
}
break;
case PID_IN:
cmd &= (SL11H_HCTLMASK_SEQ | SL11H_HCTLMASK_PREAMBLE);
cmd |= (SL11H_HCTLMASK_ARM | SL11H_HCTLMASK_ENBLEP);
break;
default:
DBGERR ("ERR: SL11StartXaction: unknow pid = 0x%x\n", pid);
return 0;
}
setup_data[0] = SL11H_DATA_START;
setup_data[1] = len;
setup_data[2] = (((pid & 0x0F) << 4) | (epaddr & 0xF));
setup_data[3] = addr & 0x7F;
SL811BufWrite (hci, SL11H_BUFADDRREG, (__u8 *) & setup_data[0], 4);
SL811Write (hci, SL11H_HOSTCTLREG, cmd);
#if 0
/* The SL811 has a hardware flaw when hub devices sends out
* SE0 between packets. It has been found in a TI chipset and
* cypress hub chipset. It causes the SL811 to hang
* The workaround is to re-issue the preample again.
*/
if ((cmd & SL11H_HCTLMASK_PREAMBLE)) {
SL811Write (hci, SL11H_PIDEPREG_B, 0xc0);
SL811Write (hci, SL11H_HOSTCTLREG_B, 0x1); // send the premable
}
#endif
return 1;
}
/*****************************************************************
*
* Function Name: hc_interrupt
*
* Interrupt service routine.
*
* 1) determine the causes of interrupt
* 2) clears all interrupts
* 3) calls appropriate function to service the interrupt
*
* Input: irq = interrupt line associated with the controller
* hci = data structure for the host controller
* r = holds the snapshot of the processor's context before
* the processor entered interrupt code. (not used here)
*
* Return value : None.
*
*****************************************************************/
static void hc_interrupt (int irq, void *__hci, struct pt_regs *r)
{
char ii;
hci_t *hci = __hci;
int isExcessNak = 0;
int urb_state = 0;
char tmpIrq = 0;
/* Get value from interrupt status register */
ii = SL811Read (hci, SL11H_INTSTATREG);
if (ii & SL11H_INTMASK_INSRMV) {
/* Device insertion or removal detected for the USB port */
SL811Write (hci, SL11H_INTENBLREG, 0);
SL811Write (hci, SL11H_CTLREG1, 0);
mdelay (100); // wait for device stable
handleInsRmvIntr (hci);
return;
}
/* Clear all interrupts */
SL811Write (hci, SL11H_INTSTATREG, 0xff);
if (ii & SL11H_INTMASK_XFERDONE) {
/* USB Done interrupt occurred */
urb_state = sh_done_list (hci, &isExcessNak);
#ifdef WARNING
if (hci->td_array->len > 0)
printk ("WARNING: IRQ, td_array->len = 0x%x, s/b:0\n",
hci->td_array->len);
#endif
if (hci->td_array->len == 0 && !isExcessNak
&& !(ii & SL11H_INTMASK_SOFINTR) && (urb_state == 0)) {
if (urb_state == 0) {
/* All urb_state has not been finished yet!
* continue with the current urb transaction
*/
if (hci->last_packet_nak == 0) {
if (!usb_pipecontrol
(hci->td_array->td[0].urb->pipe))
sh_add_packet (hci, hci->td_array-> td[0].urb);
}
} else {
/* The last transaction has completed:
* schedule the next transaction
*/
sh_schedule_trans (hci, 0);
}
}
SL811Write (hci, SL11H_INTSTATREG, 0xff);
return;
}
if (ii & SL11H_INTMASK_SOFINTR) {
hci->frame_number = (hci->frame_number + 1) % 2048;
if (hci->td_array->len == 0)
sh_schedule_trans (hci, 1);
else {
if (sofWaitCnt++ > 100) {
/* The last transaction has not completed.
* Need to retire the current td, and let
* it transmit again later on.
* (THIS NEEDS TO BE WORK ON MORE, IT SHOULD NEVER
* GET TO THIS POINT)
*/
DBGERR ("SOF interrupt: td_array->len = 0x%x, s/b: 0\n",
hci->td_array->len);
urb_print (hci->td_array->td[hci->td_array->len - 1].urb,
"INTERRUPT", 0);
sh_done_list (hci, &isExcessNak);
SL811Write (hci, SL11H_INTSTATREG, 0xff);
hci->td_array->len = 0;
sofWaitCnt = 0;
}
}
tmpIrq = SL811Read (hci, SL11H_INTSTATREG) & SL811Read (hci, SL11H_INTENBLREG);
if (tmpIrq) {
DBG ("IRQ occurred while service SOF: irq = 0x%x\n",
tmpIrq);
/* If we receive a DONE IRQ after schedule, need to
* handle DONE IRQ again
*/
if (tmpIrq & SL11H_INTMASK_XFERDONE) {
DBGERR ("IRQ occurred while service SOF: irq = 0x%x\n",
tmpIrq);
urb_state = sh_done_list (hci, &isExcessNak);
}
SL811Write (hci, SL11H_INTSTATREG, 0xff);
}
} else {
DBG ("SL811 ISR: unknown, int = 0x%x \n", ii);
}
SL811Write (hci, SL11H_INTSTATREG, 0xff);
return;
}
/*****************************************************************
*
* Function Name: hc_reset
*
* This function does register test and resets the SL811HS
* controller.
*
* Input: hci = data structure for the host controller
*
* Return value : 0
*
*****************************************************************/
static int hc_reset (hci_t * hci)
{
int attachFlag = 0;
DBGFUNC ("Enter hc_reset\n");
regTest (hci);
attachFlag = USBReset (hci);
if (attachFlag) {
setPortChange (hci, PORT_CONNECT_CHANGE);
}
return (0);
}
/*****************************************************************
*
* Function Name: hc_alloc_trans_buffer
*
* This function allocates all transfer buffer
*
* Input: hci = data structure for the host controller
*
* Return value : 0
*
*****************************************************************/
static int hc_alloc_trans_buffer (hci_t * hci)
{
hcipriv_t *hp = &hci->hp;
int maxlen;
hp->itl0_len = 0;
hp->itl1_len = 0;
hp->atl_len = 0;
hp->itl_buffer_len = 1024;
hp->atl_buffer_len = 4096 - 2 * hp->itl_buffer_len; /* 2048 */
maxlen = (hp->itl_buffer_len > hp->atl_buffer_len) ? hp->itl_buffer_len : hp->atl_buffer_len;
hp->tl = kmalloc (maxlen, GFP_KERNEL);
if (!hp->tl)
return -ENOMEM;
memset (hp->tl, 0, maxlen);
return 0;
}
/*****************************************************************
*
* Function Name: getPortStatusAndChange
*
* This function gets the ports status from SL811 and format it
* to a USB request format
*
* Input: hci = data structure for the host controller
*
* Return value : port status and change
*
*****************************************************************/
static __u32 getPortStatusAndChange (hci_t * hci)
{
hcipriv_t *hp = &hci->hp;
__u32 portstatus;
DBGFUNC ("enter getPorStatusAndChange\n");
portstatus = hp->RHportStatus->portChange << 16 | hp->RHportStatus->portStatus;
return (portstatus);
}
/*****************************************************************
*
* Function Name: setPortChange
*
* This function set the bit position of portChange.
*
* Input: hci = data structure for the host controller
* bitPos = the bit position
*
* Return value : none
*
*****************************************************************/
static void setPortChange (hci_t * hci, __u16 bitPos)
{
hcipriv_t *hp = &hci->hp;
switch (bitPos) {
case PORT_CONNECT_STAT:
hp->RHportStatus->portChange |= bitPos;
break;
case PORT_ENABLE_STAT:
hp->RHportStatus->portChange |= bitPos;
break;
case PORT_RESET_STAT:
hp->RHportStatus->portChange |= bitPos;
break;
case PORT_POWER_STAT:
hp->RHportStatus->portChange |= bitPos;
break;
case PORT_SUSPEND_STAT:
hp->RHportStatus->portChange |= bitPos;
break;
case PORT_OVER_CURRENT_STAT:
hp->RHportStatus->portChange |= bitPos;
break;
}
}
/*****************************************************************
*
* Function Name: clrPortChange
*
* This function clear the bit position of portChange.
*
* Input: hci = data structure for the host controller
* bitPos = the bit position
*
* Return value : none
*
*****************************************************************/
static void clrPortChange (hci_t * hci, __u16 bitPos)
{
hcipriv_t *hp = &hci->hp;
switch (bitPos) {
case PORT_CONNECT_CHANGE:
hp->RHportStatus->portChange &= ~bitPos;
break;
case PORT_ENABLE_CHANGE:
hp->RHportStatus->portChange &= ~bitPos;
break;
case PORT_RESET_CHANGE:
hp->RHportStatus->portChange &= ~bitPos;
break;
case PORT_SUSPEND_CHANGE:
hp->RHportStatus->portChange &= ~bitPos;
break;
case PORT_OVER_CURRENT_CHANGE:
hp->RHportStatus->portChange &= ~bitPos;
break;
}
}
/*****************************************************************
*
* Function Name: clrPortStatus
*
* This function clear the bit position of portStatus.
*
* Input: hci = data structure for the host controller
* bitPos = the bit position
*
* Return value : none
*
*****************************************************************/
static void clrPortStatus (hci_t * hci, __u16 bitPos)
{
hcipriv_t *hp = &hci->hp;
switch (bitPos) {
case PORT_ENABLE_STAT:
hp->RHportStatus->portStatus &= ~bitPos;
break;
case PORT_RESET_STAT:
hp->RHportStatus->portStatus &= ~bitPos;
break;
case PORT_POWER_STAT:
hp->RHportStatus->portStatus &= ~bitPos;
break;
case PORT_SUSPEND_STAT:
hp->RHportStatus->portStatus &= ~bitPos;
break;
}
}
/*****************************************************************
*
* Function Name: setPortStatus
*
* This function set the bit position of portStatus.
*
* Input: hci = data structure for the host controller
* bitPos = the bit position
*
* Return value : none
*
*****************************************************************/
static void setPortStatus (hci_t * hci, __u16 bitPos)
{
hcipriv_t *hp = &hci->hp;
switch (bitPos) {
case PORT_ENABLE_STAT:
hp->RHportStatus->portStatus |= bitPos;
break;
case PORT_RESET_STAT:
hp->RHportStatus->portStatus |= bitPos;
break;
case PORT_POWER_STAT:
hp->RHportStatus->portStatus |= bitPos;
break;
case PORT_SUSPEND_STAT:
hp->RHportStatus->portStatus |= bitPos;
break;
}
}
/*****************************************************************
*
* Function Name: hc_start
*
* This function starts the root hub functionality.
*
* Input: hci = data structure for the host controller
*
* Return value : 0
*
*****************************************************************/
static int hc_start (hci_t * hci)
{
DBGFUNC ("Enter hc_start\n");
rh_connect_rh (hci);
return 0;
}
/*****************************************************************
*
* Function Name: hc_alloc_hci
*
* This function allocates all data structure and store in the
* private data structure.
*
* Input: hci = data structure for the host controller
*
* Return value : 0
*
*****************************************************************/
static hci_t *__devinit hc_alloc_hci (void)
{
hci_t *hci;
hcipriv_t *hp;
portstat_t *ps;
struct usb_bus *bus;
DBGFUNC ("Enter hc_alloc_hci\n");
hci = (hci_t *) kmalloc (sizeof (hci_t), GFP_KERNEL);
if (!hci)
return NULL;
memset (hci, 0, sizeof (hci_t));
hp = &hci->hp;
hp->irq = -1;
hp->hcport = -1;
/* setup root hub port status */
ps = (portstat_t *) kmalloc (sizeof (portstat_t), GFP_KERNEL);
if (!ps)
return NULL;
ps->portStatus = PORT_STAT_DEFAULT;
ps->portChange = PORT_CHANGE_DEFAULT;
hp->RHportStatus = ps;
hci->nakCnt = 0;
hci->last_packet_nak = 0;
hci->a_td_array.len = 0;
hci->i_td_array[0].len = 0;
hci->i_td_array[1].len = 0;
hci->td_array = &hci->a_td_array;
hci->active_urbs = 0;
hci->active_trans = 0;
INIT_LIST_HEAD (&hci->hci_hcd_list);
list_add (&hci->hci_hcd_list, &hci_hcd_list);
init_waitqueue_head (&hci->waitq);
INIT_LIST_HEAD (&hci->ctrl_list);
INIT_LIST_HEAD (&hci->bulk_list);
INIT_LIST_HEAD (&hci->iso_list);
INIT_LIST_HEAD (&hci->intr_list);
INIT_LIST_HEAD (&hci->del_list);
bus = usb_alloc_bus (&hci_device_operations);
if (!bus) {
kfree (hci);
kfree (ps);
return NULL;
}
hci->bus = bus;
bus->hcpriv = (void *) hci;
return hci;
}
/*****************************************************************
*
* Function Name: hc_release_hci
*
* This function De-allocate all resources
*
* Input: hci = data structure for the host controller
*
* Return value : 0
*
*****************************************************************/
static void hc_release_hci (hci_t * hci)
{
hcipriv_t *hp = &hci->hp;
DBGFUNC ("Enter hc_release_hci\n");
/* disconnect all devices */
if (hci->bus->root_hub)
usb_disconnect (&hci->bus->root_hub);
hc_reset (hci);
if (hp->tl)
kfree (hp->tl);
if (hp->hcport > 0) {
release_region (hp->hcport, 2);
hp->hcport = 0;
}
if (hp->irq >= 0) {
free_irq (hp->irq, hci);
hp->irq = -1;
}
usb_deregister_bus (hci->bus);
usb_put_bus (hci->bus);
list_del_init (&hci->hci_hcd_list);
kfree (hci);
}
/*****************************************************************
*
* Function Name: init_irq
*
* This function is board specific. It sets up the interrupt to
* be an edge trigger and trigger on the rising edge
*
* Input: none
*
* Return value : none
*
*****************************************************************/
void init_irq (void)
{
GPDR &= ~(1 << 13);
set_GPIO_IRQ_edge (1 << 13, GPIO_RISING_EDGE);
}
/*****************************************************************
*
* Function Name: hc_found_hci
*
* This function request IO memory regions, request IRQ, and
* allocate all other resources.
*
* Input: addr = first IO address
* addr2 = second IO address
* irq = interrupt number
*
* Return: 0 = success or error condition
*
*****************************************************************/
static int __devinit hc_found_hci (int addr, int addr2, int irq)
{
hci_t *hci;
hcipriv_t *hp;
DBGFUNC ("Enter hc_found_hci\n");
hci = hc_alloc_hci ();
if (!hci) {
return -ENOMEM;
}
init_irq ();
hp = &hci->hp;
if (!request_region (addr, 256, "SL811 USB HOST")) {
DBGERR ("request address %d failed", addr);
hc_release_hci (hci);
return -EBUSY;
}
hp->hcport = addr;
if (!hp->hcport) {
DBGERR ("Error mapping SL811 Memory 0x%x", hp->hcport);
}
if (!request_region (addr2, 256, "SL811 USB HOST")) {
DBGERR ("request address %d failed", addr2);
hc_release_hci (hci);
return -EBUSY;
}
hp->hcport2 = addr2;
if (!hp->hcport2) {
DBGERR ("Error mapping SL811 Memory 0x%x", hp->hcport2);
}
if (hc_alloc_trans_buffer (hci)) {
hc_release_hci (hci);
return -ENOMEM;
}
usb_register_bus (hci->bus);
if (request_irq (irq, hc_interrupt, 0, "SL811", hci) != 0) {
DBGERR ("request interrupt %d failed", irq);
hc_release_hci (hci);
return -EBUSY;
}
hp->irq = irq;
printk (KERN_INFO __FILE__ ": USB SL811 at %x, addr2 = %x, IRQ %d\n",
addr, addr2, irq);
hc_reset (hci);
if (hc_start (hci) < 0) {
DBGERR ("can't start usb-%x", addr);
hc_release_hci (hci);
return -EBUSY;
}
return 0;
}
/*****************************************************************
*
* Function Name: hci_hcd_init
*
* This is an init function, and it is the first function being called
*
* Input: none
*
* Return: 0 = success or error condition
*
*****************************************************************/
static int __init hci_hcd_init (void)
{
int ret;
DBGFUNC ("Enter hci_hcd_init\n");
if (usb_disabled())
return -ENODEV;
ret = hc_found_hci (base_addr, data_reg_addr, irq);
return ret;
}
/*****************************************************************
*
* Function Name: hci_hcd_cleanup
*
* This is a cleanup function, and it is called when module is
* unloaded.
*
* Input: none
*
* Return: none
*
*****************************************************************/
static void __exit hci_hcd_cleanup (void)
{
struct list_head *hci_l;
hci_t *hci;
DBGFUNC ("Enter hci_hcd_cleanup\n");
for (hci_l = hci_hcd_list.next; hci_l != &hci_hcd_list;) {
hci = list_entry (hci_l, hci_t, hci_hcd_list);
hci_l = hci_l->next;
hc_release_hci (hci);
}
}
module_init (hci_hcd_init);
module_exit (hci_hcd_cleanup);
MODULE_AUTHOR ("Pei Liu <pbl@cypress.com>");
MODULE_DESCRIPTION ("USB SL811HS Host Controller Driver");
![[BACK]](/icons/back.gif){kind=icon}
Return to hc_sl811.c CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [Development] / linux-2.6-xfs / drivers / usb / host