/*
* ibm_emac_core.c
*
* Ethernet driver for the built in ethernet on the IBM 4xx PowerPC
* processors.
*
* (c) 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org>
*
* Based on original work by
*
* Armin Kuster <akuster@mvista.com>
* Johnnie Peters <jpeters@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
* TODO
* - Check for races in the "remove" code path
* - Add some Power Management to the MAC and the PHY
* - Audit remaining of non-rewritten code (--BenH)
* - Cleanup message display using msglevel mecanism
* - Address all errata
* - Audit all register update paths to ensure they
* are being written post soft reset if required.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/dma-mapping.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/bitops.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/ocp.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/crc32.h>
#include "ibm_emac_core.h"
//#define MDIO_DEBUG(fmt) printk fmt
#define MDIO_DEBUG(fmt)
//#define LINK_DEBUG(fmt) printk fmt
#define LINK_DEBUG(fmt)
//#define PKT_DEBUG(fmt) printk fmt
#define PKT_DEBUG(fmt)
#define DRV_NAME "emac"
#define DRV_VERSION "2.0"
#define DRV_AUTHOR "Benjamin Herrenschmidt <benh@kernel.crashing.org>"
#define DRV_DESC "IBM EMAC Ethernet driver"
/*
* When mdio_idx >= 0, contains a list of emac ocp_devs
* that have had their initialization deferred until the
* common MDIO controller has been initialized.
*/
LIST_HEAD(emac_init_list);
MODULE_AUTHOR(DRV_AUTHOR);
MODULE_DESCRIPTION(DRV_DESC);
MODULE_LICENSE("GPL");
static int skb_res = SKB_RES;
module_param(skb_res, int, 0444);
MODULE_PARM_DESC(skb_res, "Amount of data to reserve on skb buffs\n"
"The 405 handles a misaligned IP header fine but\n"
"this can help if you are routing to a tunnel or a\n"
"device that needs aligned data. 0..2");
#define RGMII_PRIV(ocpdev) ((struct ibm_ocp_rgmii*)ocp_get_drvdata(ocpdev))
static unsigned int rgmii_enable[] = {
RGMII_RTBI,
RGMII_RGMII,
RGMII_TBI,
RGMII_GMII
};
static unsigned int rgmii_speed_mask[] = {
RGMII_MII2_SPDMASK,
RGMII_MII3_SPDMASK
};
static unsigned int rgmii_speed100[] = {
RGMII_MII2_100MB,
RGMII_MII3_100MB
};
static unsigned int rgmii_speed1000[] = {
RGMII_MII2_1000MB,
RGMII_MII3_1000MB
};
#define ZMII_PRIV(ocpdev) ((struct ibm_ocp_zmii*)ocp_get_drvdata(ocpdev))
static unsigned int zmii_enable[][4] = {
{ZMII_SMII0, ZMII_RMII0, ZMII_MII0,
~(ZMII_MDI1 | ZMII_MDI2 | ZMII_MDI3)},
{ZMII_SMII1, ZMII_RMII1, ZMII_MII1,
~(ZMII_MDI0 | ZMII_MDI2 | ZMII_MDI3)},
{ZMII_SMII2, ZMII_RMII2, ZMII_MII2,
~(ZMII_MDI0 | ZMII_MDI1 | ZMII_MDI3)},
{ZMII_SMII3, ZMII_RMII3, ZMII_MII3, ~(ZMII_MDI0 | ZMII_MDI1 | ZMII_MDI2)}
};
static unsigned int mdi_enable[] = {
ZMII_MDI0,
ZMII_MDI1,
ZMII_MDI2,
ZMII_MDI3
};
static unsigned int zmii_speed = 0x0;
static unsigned int zmii_speed100[] = {
ZMII_MII0_100MB,
ZMII_MII1_100MB,
ZMII_MII2_100MB,
ZMII_MII3_100MB
};
/* Since multiple EMACs share MDIO lines in various ways, we need
* to avoid re-using the same PHY ID in cases where the arch didn't
* setup precise phy_map entries
*/
static u32 busy_phy_map = 0;
/* If EMACs share a common MDIO device, this points to it */
static struct net_device *mdio_ndev = NULL;
struct emac_def_dev {
struct list_head link;
struct ocp_device *ocpdev;
struct ibm_ocp_mal *mal;
};
static struct net_device_stats *emac_stats(struct net_device *dev)
{
struct ocp_enet_private *fep = dev->priv;
return &fep->stats;
};
static int
emac_init_rgmii(struct ocp_device *rgmii_dev, int input, int phy_mode)
{
struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(rgmii_dev);
const char *mode_name[] = { "RTBI", "RGMII", "TBI", "GMII" };
int mode = -1;
if (!rgmii) {
rgmii = kmalloc(sizeof(struct ibm_ocp_rgmii), GFP_KERNEL);
if (rgmii == NULL) {
printk(KERN_ERR
"rgmii%d: Out of memory allocating RGMII structure!\n",
rgmii_dev->def->index);
return -ENOMEM;
}
memset(rgmii, 0, sizeof(*rgmii));
rgmii->base =
(struct rgmii_regs *)ioremap(rgmii_dev->def->paddr,
sizeof(*rgmii->base));
if (rgmii->base == NULL) {
printk(KERN_ERR
"rgmii%d: Cannot ioremap bridge registers!\n",
rgmii_dev->def->index);
kfree(rgmii);
return -ENOMEM;
}
ocp_set_drvdata(rgmii_dev, rgmii);
}
if (phy_mode) {
switch (phy_mode) {
case PHY_MODE_GMII:
mode = GMII;
break;
case PHY_MODE_TBI:
mode = TBI;
break;
case PHY_MODE_RTBI:
mode = RTBI;
break;
case PHY_MODE_RGMII:
default:
mode = RGMII;
}
rgmii->base->fer &= ~RGMII_FER_MASK(input);
rgmii->base->fer |= rgmii_enable[mode] << (4 * input);
} else {
switch ((rgmii->base->fer & RGMII_FER_MASK(input)) >> (4 *
input)) {
case RGMII_RTBI:
mode = RTBI;
break;
case RGMII_RGMII:
mode = RGMII;
break;
case RGMII_TBI:
mode = TBI;
break;
case RGMII_GMII:
mode = GMII;
}
}
/* Set mode to RGMII if nothing valid is detected */
if (mode < 0)
mode = RGMII;
printk(KERN_NOTICE "rgmii%d: input %d in %s mode\n",
rgmii_dev->def->index, input, mode_name[mode]);
rgmii->mode[input] = mode;
rgmii->users++;
return 0;
}
static void
emac_rgmii_port_speed(struct ocp_device *ocpdev, int input, int speed)
{
struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(ocpdev);
unsigned int rgmii_speed;
rgmii_speed = in_be32(&rgmii->base->ssr);
rgmii_speed &= ~rgmii_speed_mask[input];
if (speed == 1000)
rgmii_speed |= rgmii_speed1000[input];
else if (speed == 100)
rgmii_speed |= rgmii_speed100[input];
out_be32(&rgmii->base->ssr, rgmii_speed);
}
static void emac_close_rgmii(struct ocp_device *ocpdev)
{
struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(ocpdev);
BUG_ON(!rgmii || rgmii->users == 0);
if (!--rgmii->users) {
ocp_set_drvdata(ocpdev, NULL);
iounmap((void *)rgmii->base);
kfree(rgmii);
}
}
static int emac_init_zmii(struct ocp_device *zmii_dev, int input, int phy_mode)
{
struct ibm_ocp_zmii *zmii = ZMII_PRIV(zmii_dev);
const char *mode_name[] = { "SMII", "RMII", "MII" };
int mode = -1;
if (!zmii) {
zmii = kmalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL);
if (zmii == NULL) {
printk(KERN_ERR
"zmii%d: Out of memory allocating ZMII structure!\n",
zmii_dev->def->index);
return -ENOMEM;
}
memset(zmii, 0, sizeof(*zmii));
zmii->base =
(struct zmii_regs *)ioremap(zmii_dev->def->paddr,
sizeof(*zmii->base));
if (zmii->base == NULL) {
printk(KERN_ERR
"zmii%d: Cannot ioremap bridge registers!\n",
zmii_dev->def->index);
kfree(zmii);
return -ENOMEM;
}
ocp_set_drvdata(zmii_dev, zmii);
}
if (phy_mode) {
switch (phy_mode) {
case PHY_MODE_MII:
mode = MII;
break;
case PHY_MODE_RMII:
mode = RMII;
break;
case PHY_MODE_SMII:
default:
mode = SMII;
}
zmii->base->fer &= ~ZMII_FER_MASK(input);
zmii->base->fer |= zmii_enable[input][mode];
} else {
switch ((zmii->base->fer & ZMII_FER_MASK(input)) << (4 * input)) {
case ZMII_MII0:
mode = MII;
break;
case ZMII_RMII0:
mode = RMII;
break;
case ZMII_SMII0:
mode = SMII;
}
}
/* Set mode to SMII if nothing valid is detected */
if (mode < 0)
mode = SMII;
printk(KERN_NOTICE "zmii%d: input %d in %s mode\n",
zmii_dev->def->index, input, mode_name[mode]);
zmii->mode[input] = mode;
zmii->users++;
return 0;
}
static void emac_enable_zmii_port(struct ocp_device *ocpdev, int input)
{
u32 mask;
struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev);
mask = in_be32(&zmii->base->fer);
mask &= zmii_enable[input][MDI]; /* turn all non enabled MDI's off */
mask |= zmii_enable[input][zmii->mode[input]] | mdi_enable[input];
out_be32(&zmii->base->fer, mask);
}
static void
emac_zmii_port_speed(struct ocp_device *ocpdev, int input, int speed)
{
struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev);
if (speed == 100)
zmii_speed |= zmii_speed100[input];
else
zmii_speed &= ~zmii_speed100[input];
out_be32(&zmii->base->ssr, zmii_speed);
}
static void emac_close_zmii(struct ocp_device *ocpdev)
{
struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev);
BUG_ON(!zmii || zmii->users == 0);
if (!--zmii->users) {
ocp_set_drvdata(ocpdev, NULL);
iounmap((void *)zmii->base);
kfree(zmii);
}
}
int emac_phy_read(struct net_device *dev, int mii_id, int reg)
{
int count;
uint32_t stacr;
struct ocp_enet_private *fep = dev->priv;
emac_t *emacp = fep->emacp;
MDIO_DEBUG(("%s: phy_read, id: 0x%x, reg: 0x%x\n", dev->name, mii_id,
reg));
/* Enable proper ZMII port */
if (fep->zmii_dev)
emac_enable_zmii_port(fep->zmii_dev, fep->zmii_input);
/* Use the EMAC that has the MDIO port */
if (fep->mdio_dev) {
dev = fep->mdio_dev;
fep = dev->priv;
emacp = fep->emacp;
}
count = 0;
while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
&& (count++ < MDIO_DELAY))
udelay(1);
MDIO_DEBUG((" (count was %d)\n", count));
if ((stacr & EMAC_STACR_OC) == 0) {
printk(KERN_WARNING "%s: PHY read timeout #1!\n", dev->name);
return -1;
}
/* Clear the speed bits and make a read request to the PHY */
stacr = ((EMAC_STACR_READ | (reg & 0x1f)) & ~EMAC_STACR_CLK_100MHZ);
stacr |= ((mii_id & 0x1F) << 5);
out_be32(&emacp->em0stacr, stacr);
count = 0;
while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
&& (count++ < MDIO_DELAY))
udelay(1);
MDIO_DEBUG((" (count was %d)\n", count));
if ((stacr & EMAC_STACR_OC) == 0) {
printk(KERN_WARNING "%s: PHY read timeout #2!\n", dev->name);
return -1;
}
/* Check for a read error */
if (stacr & EMAC_STACR_PHYE) {
MDIO_DEBUG(("EMAC MDIO PHY error !\n"));
return -1;
}
MDIO_DEBUG((" -> 0x%x\n", stacr >> 16));
return (stacr >> 16);
}
void emac_phy_write(struct net_device *dev, int mii_id, int reg, int data)
{
int count;
uint32_t stacr;
struct ocp_enet_private *fep = dev->priv;
emac_t *emacp = fep->emacp;
MDIO_DEBUG(("%s phy_write, id: 0x%x, reg: 0x%x, data: 0x%x\n",
dev->name, mii_id, reg, data));
/* Enable proper ZMII port */
if (fep->zmii_dev)
emac_enable_zmii_port(fep->zmii_dev, fep->zmii_input);
/* Use the EMAC that has the MDIO port */
if (fep->mdio_dev) {
dev = fep->mdio_dev;
fep = dev->priv;
emacp = fep->emacp;
}
count = 0;
while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
&& (count++ < MDIO_DELAY))
udelay(1);
MDIO_DEBUG((" (count was %d)\n", count));
if ((stacr & EMAC_STACR_OC) == 0) {
printk(KERN_WARNING "%s: PHY write timeout #2!\n", dev->name);
return;
}
/* Clear the speed bits and make a read request to the PHY */
stacr = ((EMAC_STACR_WRITE | (reg & 0x1f)) & ~EMAC_STACR_CLK_100MHZ);
stacr |= ((mii_id & 0x1f) << 5) | ((data & 0xffff) << 16);
out_be32(&emacp->em0stacr, stacr);
count = 0;
while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
&& (count++ < MDIO_DELAY))
udelay(1);
MDIO_DEBUG((" (count was %d)\n", count));
if ((stacr & EMAC_STACR_OC) == 0)
printk(KERN_WARNING "%s: PHY write timeout #2!\n", dev->name);
/* Check for a write error */
if ((stacr & EMAC_STACR_PHYE) != 0) {
MDIO_DEBUG(("EMAC MDIO PHY error !\n"));
}
}
static void emac_txeob_dev(void *param, u32 chanmask)
{
struct net_device *dev = param;
struct ocp_enet_private *fep = dev->priv;
unsigned long flags;
spin_lock_irqsave(&fep->lock, flags);
PKT_DEBUG(("emac_txeob_dev() entry, tx_cnt: %d\n", fep->tx_cnt));
while (fep->tx_cnt &&
!(fep->tx_desc[fep->ack_slot].ctrl & MAL_TX_CTRL_READY)) {
if (fep->tx_desc[fep->ack_slot].ctrl & MAL_TX_CTRL_LAST) {
/* Tell the system the transmit completed. */
dma_unmap_single(&fep->ocpdev->dev,
fep->tx_desc[fep->ack_slot].data_ptr,
fep->tx_desc[fep->ack_slot].data_len,
DMA_TO_DEVICE);
dev_kfree_skb_irq(fep->tx_skb[fep->ack_slot]);
if (fep->tx_desc[fep->ack_slot].ctrl &
(EMAC_TX_ST_EC | EMAC_TX_ST_MC | EMAC_TX_ST_SC))
fep->stats.collisions++;
}
fep->tx_skb[fep->ack_slot] = (struct sk_buff *)NULL;
if (++fep->ack_slot == NUM_TX_BUFF)
fep->ack_slot = 0;
fep->tx_cnt--;
}
if (fep->tx_cnt < NUM_TX_BUFF)
netif_wake_queue(dev);
PKT_DEBUG(("emac_txeob_dev() exit, tx_cnt: %d\n", fep->tx_cnt));
spin_unlock_irqrestore(&fep->lock, flags);
}
/*
Fill/Re-fill the rx chain with valid ctrl/ptrs.
This function will fill from rx_slot up to the parm end.
So to completely fill the chain pre-set rx_slot to 0 and
pass in an end of 0.
*/
static void emac_rx_fill(struct net_device *dev, int end)
{
int i;
struct ocp_enet_private *fep = dev->priv;
i = fep->rx_slot;
do {
/* We don't want the 16 bytes skb_reserve done by dev_alloc_skb,
* it breaks our cache line alignement. However, we still allocate
* +16 so that we end up allocating the exact same size as
* dev_alloc_skb() would do.
* Also, because of the skb_res, the max DMA size we give to EMAC
* is slighly wrong, causing it to potentially DMA 2 more bytes
* from a broken/oversized packet. These 16 bytes will take care
* that we don't walk on somebody else toes with that.
*/
fep->rx_skb[i] =
alloc_skb(fep->rx_buffer_size + 16, GFP_ATOMIC);
if (fep->rx_skb[i] == NULL) {
/* Keep rx_slot here, the next time clean/fill is called
* we will try again before the MAL wraps back here
* If the MAL tries to use this descriptor with
* the EMPTY bit off it will cause the
* rxde interrupt. That is where we will
* try again to allocate an sk_buff.
*/
break;
}
if (skb_res)
skb_reserve(fep->rx_skb[i], skb_res);
/* We must NOT dma_map_single the cache line right after the
* buffer, so we must crop our sync size to account for the
* reserved space
*/
fep->rx_desc[i].data_ptr =
(unsigned char *)dma_map_single(&fep->ocpdev->dev,
(void *)fep->rx_skb[i]->
data,
fep->rx_buffer_size -
skb_res, DMA_FROM_DEVICE);
/*
* Some 4xx implementations use the previously
* reserved bits in data_len to encode the MS
* 4-bits of a 36-bit physical address (ERPN)
* This must be initialized.
*/
fep->rx_desc[i].data_len = 0;
fep->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR |
(i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
} while ((i = (i + 1) % NUM_RX_BUFF) != end);
fep->rx_slot = i;
}
static void
emac_rx_csum(struct net_device *dev, unsigned short ctrl, struct sk_buff *skb)
{
struct ocp_enet_private *fep = dev->priv;
/* Exit if interface has no TAH engine */
if (!fep->tah_dev) {
skb->ip_summed = CHECKSUM_NONE;
return;
}
/* Check for TCP/UDP/IP csum error */
if (ctrl & EMAC_CSUM_VER_ERROR) {
/* Let the stack verify checksum errors */
skb->ip_summed = CHECKSUM_NONE;
/* adapter->hw_csum_err++; */
} else {
/* Csum is good */
skb->ip_summed = CHECKSUM_UNNECESSARY;
/* adapter->hw_csum_good++; */
}
}
static int emac_rx_clean(struct net_device *dev)
{
int i, b, bnum = 0, buf[6];
int error, frame_length;
struct ocp_enet_private *fep = dev->priv;
unsigned short ctrl;
i = fep->rx_slot;
PKT_DEBUG(("emac_rx_clean() entry, rx_slot: %d\n", fep->rx_slot));
do {
if (fep->rx_skb[i] == NULL)
continue; /*we have already handled the packet but haved failed to alloc */
/*
since rx_desc is in uncached mem we don't keep reading it directly
we pull out a local copy of ctrl and do the checks on the copy.
*/
ctrl = fep->rx_desc[i].ctrl;
if (ctrl & MAL_RX_CTRL_EMPTY)
break; /*we don't have any more ready packets */
if (EMAC_IS_BAD_RX_PACKET(ctrl)) {
fep->stats.rx_errors++;
fep->stats.rx_dropped++;
if (ctrl & EMAC_RX_ST_OE)
fep->stats.rx_fifo_errors++;
if (ctrl & EMAC_RX_ST_AE)
fep->stats.rx_frame_errors++;
if (ctrl & EMAC_RX_ST_BFCS)
fep->stats.rx_crc_errors++;
if (ctrl & (EMAC_RX_ST_RP | EMAC_RX_ST_PTL |
EMAC_RX_ST_ORE | EMAC_RX_ST_IRE))
fep->stats.rx_length_errors++;
} else {
if ((ctrl & (MAL_RX_CTRL_FIRST | MAL_RX_CTRL_LAST)) ==
(MAL_RX_CTRL_FIRST | MAL_RX_CTRL_LAST)) {
/* Single descriptor packet */
emac_rx_csum(dev, ctrl, fep->rx_skb[i]);
/* Send the skb up the chain. */
frame_length = fep->rx_desc[i].data_len - 4;
skb_put(fep->rx_skb[i], frame_length);
fep->rx_skb[i]->dev = dev;
fep->rx_skb[i]->protocol =
eth_type_trans(fep->rx_skb[i], dev);
error = netif_rx(fep->rx_skb[i]);
if ((error == NET_RX_DROP) ||
(error == NET_RX_BAD)) {
fep->stats.rx_dropped++;
} else {
fep->stats.rx_packets++;
fep->stats.rx_bytes += frame_length;
}
fep->rx_skb[i] = NULL;
} else {
/* Multiple descriptor packet */
if (ctrl & MAL_RX_CTRL_FIRST) {
if (fep->rx_desc[(i + 1) % NUM_RX_BUFF].
ctrl & MAL_RX_CTRL_EMPTY)
break;
bnum = 0;
buf[bnum] = i;
++bnum;
continue;
}
if (((ctrl & MAL_RX_CTRL_FIRST) !=
MAL_RX_CTRL_FIRST) &&
((ctrl & MAL_RX_CTRL_LAST) !=
MAL_RX_CTRL_LAST)) {
if (fep->rx_desc[(i + 1) %
NUM_RX_BUFF].ctrl &
MAL_RX_CTRL_EMPTY) {
i = buf[0];
break;
}
buf[bnum] = i;
++bnum;
continue;
}
if (ctrl & MAL_RX_CTRL_LAST) {
buf[bnum] = i;
++bnum;
skb_put(fep->rx_skb[buf[0]],
fep->rx_desc[buf[0]].data_len);
for (b = 1; b < bnum; b++) {
/*
* MAL is braindead, we need
* to copy the remainder
* of the packet from the
* latter descriptor buffers
* to the first skb. Then
* dispose of the source
* skbs.
*
* Once the stack is fixed
* to handle frags on most
* protocols we can generate
* a fragmented skb with
* no copies.
*/
memcpy(fep->rx_skb[buf[0]]->
data +
fep->rx_skb[buf[0]]->len,
fep->rx_skb[buf[b]]->
data,
fep->rx_desc[buf[b]].
data_len);
skb_put(fep->rx_skb[buf[0]],
fep->rx_desc[buf[b]].
data_len);
dma_unmap_single(&fep->ocpdev->
dev,
fep->
rx_desc[buf
[b]].
data_ptr,
fep->
rx_desc[buf
[b]].
data_len,
DMA_FROM_DEVICE);
dev_kfree_skb(fep->
rx_skb[buf[b]]);
}
emac_rx_csum(dev, ctrl,
fep->rx_skb[buf[0]]);
fep->rx_skb[buf[0]]->dev = dev;
fep->rx_skb[buf[0]]->protocol =
eth_type_trans(fep->rx_skb[buf[0]],
dev);
error = netif_rx(fep->rx_skb[buf[0]]);
if ((error == NET_RX_DROP)
|| (error == NET_RX_BAD)) {
fep->stats.rx_dropped++;
} else {
fep->stats.rx_packets++;
fep->stats.rx_bytes +=
fep->rx_skb[buf[0]]->len;
}
for (b = 0; b < bnum; b++)
fep->rx_skb[buf[b]] = NULL;
}
}
}
} while ((i = (i + 1) % NUM_RX_BUFF) != fep->rx_slot);
PKT_DEBUG(("emac_rx_clean() exit, rx_slot: %d\n", fep->rx_slot));
return i;
}
static void emac_rxeob_dev(void *param, u32 chanmask)
{
struct net_device *dev = param;
struct ocp_enet_private *fep = dev->priv;
unsigned long flags;
int n;
spin_lock_irqsave(&fep->lock, flags);
if ((n = emac_rx_clean(dev)) != fep->rx_slot)
emac_rx_fill(dev, n);
spin_unlock_irqrestore(&fep->lock, flags);
}
/*
* This interrupt should never occurr, we don't program
* the MAL for contiunous mode.
*/
static void emac_txde_dev(void *param, u32 chanmask)
{
struct net_device *dev = param;
struct ocp_enet_private *fep = dev->priv;
printk(KERN_WARNING "%s: transmit descriptor error\n", dev->name);
emac_mac_dump(dev);
emac_mal_dump(dev);
/* Reenable the transmit channel */
mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
}
/*
* This interrupt should be very rare at best. This occurs when
* the hardware has a problem with the receive descriptors. The manual
* states that it occurs when the hardware cannot the receive descriptor
* empty bit is not set. The recovery mechanism will be to
* traverse through the descriptors, handle any that are marked to be
* handled and reinitialize each along the way. At that point the driver
* will be restarted.
*/
static void emac_rxde_dev(void *param, u32 chanmask)
{
struct net_device *dev = param;
struct ocp_enet_private *fep = dev->priv;
unsigned long flags;
if (net_ratelimit()) {
printk(KERN_WARNING "%s: receive descriptor error\n",
fep->ndev->name);
emac_mac_dump(dev);
emac_mal_dump(dev);
emac_desc_dump(dev);
}
/* Disable RX channel */
spin_lock_irqsave(&fep->lock, flags);
mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
/* For now, charge the error against all emacs */
fep->stats.rx_errors++;
/* so do we have any good packets still? */
emac_rx_clean(dev);
/* When the interface is restarted it resets processing to the
* first descriptor in the table.
*/
fep->rx_slot = 0;
emac_rx_fill(dev, 0);
set_mal_dcrn(fep->mal, DCRN_MALRXEOBISR, fep->commac.rx_chan_mask);
set_mal_dcrn(fep->mal, DCRN_MALRXDEIR, fep->commac.rx_chan_mask);
/* Reenable the receive channels */
mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
spin_unlock_irqrestore(&fep->lock, flags);
}
static irqreturn_t
emac_mac_irq(int irq, void *dev_instance, struct pt_regs *regs)
{
struct net_device *dev = dev_instance;
struct ocp_enet_private *fep = dev->priv;
emac_t *emacp = fep->emacp;
unsigned long tmp_em0isr;
/* EMAC interrupt */
tmp_em0isr = in_be32(&emacp->em0isr);
if (tmp_em0isr & (EMAC_ISR_TE0 | EMAC_ISR_TE1)) {
/* This error is a hard transmit error - could retransmit */
fep->stats.tx_errors++;
/* Reenable the transmit channel */
mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
} else {
fep->stats.rx_errors++;
}
if (tmp_em0isr & EMAC_ISR_RP)
fep->stats.rx_length_errors++;
if (tmp_em0isr & EMAC_ISR_ALE)
fep->stats.rx_frame_errors++;
if (tmp_em0isr & EMAC_ISR_BFCS)
fep->stats.rx_crc_errors++;
if (tmp_em0isr & EMAC_ISR_PTLE)
fep->stats.rx_length_errors++;
if (tmp_em0isr & EMAC_ISR_ORE)
fep->stats.rx_length_errors++;
if (tmp_em0isr & EMAC_ISR_TE0)
fep->stats.tx_aborted_errors++;
emac_err_dump(dev, tmp_em0isr);
out_be32(&emacp->em0isr, tmp_em0isr);
return IRQ_HANDLED;
}
static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
unsigned short ctrl;
unsigned long flags;
struct ocp_enet_private *fep = dev->priv;
emac_t *emacp = fep->emacp;
int len = skb->len;
unsigned int offset = 0, size, f, tx_slot_first;
unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
spin_lock_irqsave(&fep->lock, flags);
len -= skb->data_len;
if ((fep->tx_cnt + nr_frags + len / DESC_BUF_SIZE + 1) > NUM_TX_BUFF) {
PKT_DEBUG(("emac_start_xmit() stopping queue\n"));
netif_stop_queue(dev);
spin_unlock_irqrestore(&fep->lock, flags);
return -EBUSY;
}
tx_slot_first = fep->tx_slot;
while (len) {
size = min(len, DESC_BUF_SIZE);
fep->tx_desc[fep->tx_slot].data_len = (short)size;
fep->tx_desc[fep->tx_slot].data_ptr =
(unsigned char *)dma_map_single(&fep->ocpdev->dev,
(void *)((unsigned int)skb->
data + offset),
size, DMA_TO_DEVICE);
ctrl = EMAC_TX_CTRL_DFLT;
if (fep->tx_slot != tx_slot_first)
ctrl |= MAL_TX_CTRL_READY;
if ((NUM_TX_BUFF - 1) == fep->tx_slot)
ctrl |= MAL_TX_CTRL_WRAP;
if (!nr_frags && (len == size)) {
ctrl |= MAL_TX_CTRL_LAST;
fep->tx_skb[fep->tx_slot] = skb;
}
if (skb->ip_summed == CHECKSUM_HW)
ctrl |= EMAC_TX_CTRL_TAH_CSUM;
fep->tx_desc[fep->tx_slot].ctrl = ctrl;
len -= size;
offset += size;
/* Bump tx count */
if (++fep->tx_cnt == NUM_TX_BUFF)
netif_stop_queue(dev);
/* Next descriptor */
if (++fep->tx_slot == NUM_TX_BUFF)
fep->tx_slot = 0;
}
for (f = 0; f < nr_frags; f++) {
struct skb_frag_struct *frag;
frag = &skb_shinfo(skb)->frags[f];
len = frag->size;
offset = 0;
while (len) {
size = min(len, DESC_BUF_SIZE);
dma_map_page(&fep->ocpdev->dev,
frag->page,
frag->page_offset + offset,
size, DMA_TO_DEVICE);
ctrl = EMAC_TX_CTRL_DFLT | MAL_TX_CTRL_READY;
if ((NUM_TX_BUFF - 1) == fep->tx_slot)
ctrl |= MAL_TX_CTRL_WRAP;
if ((f == (nr_frags - 1)) && (len == size)) {
ctrl |= MAL_TX_CTRL_LAST;
fep->tx_skb[fep->tx_slot] = skb;
}
if (skb->ip_summed == CHECKSUM_HW)
ctrl |= EMAC_TX_CTRL_TAH_CSUM;
fep->tx_desc[fep->tx_slot].data_len = (short)size;
fep->tx_desc[fep->tx_slot].data_ptr =
(char *)((page_to_pfn(frag->page) << PAGE_SHIFT) +
frag->page_offset + offset);
fep->tx_desc[fep->tx_slot].ctrl = ctrl;
len -= size;
offset += size;
/* Bump tx count */
if (++fep->tx_cnt == NUM_TX_BUFF)
netif_stop_queue(dev);
/* Next descriptor */
if (++fep->tx_slot == NUM_TX_BUFF)
fep->tx_slot = 0;
}
}
/*
* Deferred set READY on first descriptor of packet to
* avoid TX MAL race.
*/
fep->tx_desc[tx_slot_first].ctrl |= MAL_TX_CTRL_READY;
/* Send the packet out. */
out_be32(&emacp->em0tmr0, EMAC_TMR0_XMIT);
fep->stats.tx_packets++;
fep->stats.tx_bytes += skb->len;
PKT_DEBUG(("emac_start_xmit() exitn"));
spin_unlock_irqrestore(&fep->lock, flags);
return 0;
}
static int emac_adjust_to_link(struct ocp_enet_private *fep)
{
emac_t *emacp = fep->emacp;
unsigned long mode_reg;
int full_duplex, speed;
full_duplex = 0;
speed = SPEED_10;
/* set mode register 1 defaults */
mode_reg = EMAC_M1_DEFAULT;
/* Read link mode on PHY */
if (fep->phy_mii.def->ops->read_link(&fep->phy_mii) == 0) {
/* If an error occurred, we don't deal with it yet */
full_duplex = (fep->phy_mii.duplex == DUPLEX_FULL);
speed = fep->phy_mii.speed;
}
/* set speed (default is 10Mb) */
switch (speed) {
case SPEED_1000:
mode_reg |= EMAC_M1_JUMBO_ENABLE | EMAC_M1_RFS_16K;
if (fep->rgmii_dev) {
struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(fep->rgmii_dev);
if ((rgmii->mode[fep->rgmii_input] == RTBI)
|| (rgmii->mode[fep->rgmii_input] == TBI))
mode_reg |= EMAC_M1_MF_1000GPCS;
else
mode_reg |= EMAC_M1_MF_1000MBPS;
emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input,
1000);
}
break;
case SPEED_100:
mode_reg |= EMAC_M1_MF_100MBPS | EMAC_M1_RFS_4K;
if (fep->rgmii_dev)
emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input,
100);
if (fep->zmii_dev)
emac_zmii_port_speed(fep->zmii_dev, fep->zmii_input,
100);
break;
case SPEED_10:
default:
mode_reg = (mode_reg & ~EMAC_M1_MF_100MBPS) | EMAC_M1_RFS_4K;
if (fep->rgmii_dev)
emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input,
10);
if (fep->zmii_dev)
emac_zmii_port_speed(fep->zmii_dev, fep->zmii_input,
10);
}
if (full_duplex)
mode_reg |= EMAC_M1_FDE | EMAC_M1_EIFC | EMAC_M1_IST;
else
mode_reg &= ~(EMAC_M1_FDE | EMAC_M1_EIFC | EMAC_M1_ILE);
LINK_DEBUG(("%s: adjust to link, speed: %d, duplex: %d, opened: %d\n",
fep->ndev->name, speed, full_duplex, fep->opened));
printk(KERN_INFO "%s: Speed: %d, %s duplex.\n",
fep->ndev->name, speed, full_duplex ? "Full" : "Half");
if (fep->opened)
out_be32(&emacp->em0mr1, mode_reg);
return 0;
}
static int emac_set_mac_address(struct net_device *ndev, void *p)
{
struct ocp_enet_private *fep = ndev->priv;
emac_t *emacp = fep->emacp;
struct sockaddr *addr = p;
if (!is_valid_ether_addr(addr->sa_data))
return -EADDRNOTAVAIL;
memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len);
/* set the high address */
out_be32(&emacp->em0iahr,
(fep->ndev->dev_addr[0] << 8) | fep->ndev->dev_addr[1]);
/* set the low address */
out_be32(&emacp->em0ialr,
(fep->ndev->dev_addr[2] << 24) | (fep->ndev->dev_addr[3] << 16)
| (fep->ndev->dev_addr[4] << 8) | fep->ndev->dev_addr[5]);
return 0;
}
static int emac_change_mtu(struct net_device *dev, int new_mtu)
{
struct ocp_enet_private *fep = dev->priv;
int old_mtu = dev->mtu;
emac_t *emacp = fep->emacp;
u32 em0mr0;
int i, full;
unsigned long flags;
if ((new_mtu < EMAC_MIN_MTU) || (new_mtu > EMAC_MAX_MTU)) {
printk(KERN_ERR
"emac: Invalid MTU setting, MTU must be between %d and %d\n",
EMAC_MIN_MTU, EMAC_MAX_MTU);
return -EINVAL;
}
if (old_mtu != new_mtu && netif_running(dev)) {
/* Stop rx engine */
em0mr0 = in_be32(&emacp->em0mr0);
out_be32(&emacp->em0mr0, em0mr0 & ~EMAC_M0_RXE);
/* Wait for descriptors to be empty */
do {
full = 0;
for (i = 0; i < NUM_RX_BUFF; i++)
if (!(fep->rx_desc[i].ctrl & MAL_RX_CTRL_EMPTY)) {
printk(KERN_NOTICE
"emac: RX ring is still full\n");
full = 1;
}
} while (full);
spin_lock_irqsave(&fep->lock, flags);
mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
/* Destroy all old rx skbs */
for (i = 0; i < NUM_RX_BUFF; i++) {
dma_unmap_single(&fep->ocpdev->dev,
fep->rx_desc[i].data_ptr,
fep->rx_desc[i].data_len,
DMA_FROM_DEVICE);
dev_kfree_skb(fep->rx_skb[i]);
fep->rx_skb[i] = NULL;
}
/* Set new rx_buffer_size and advertise new mtu */
fep->rx_buffer_size =
new_mtu + ENET_HEADER_SIZE + ENET_FCS_SIZE;
dev->mtu = new_mtu;
/* Re-init rx skbs */
fep->rx_slot = 0;
emac_rx_fill(dev, 0);
/* Restart the rx engine */
mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
out_be32(&emacp->em0mr0, em0mr0 | EMAC_M0_RXE);
spin_unlock_irqrestore(&fep->lock, flags);
}
return 0;
}
static void __emac_set_multicast_list(struct net_device *dev)
{
struct ocp_enet_private *fep = dev->priv;
emac_t *emacp = fep->emacp;
u32 rmr = in_be32(&emacp->em0rmr);
/* First clear all special bits, they can be set later */
rmr &= ~(EMAC_RMR_PME | EMAC_RMR_PMME | EMAC_RMR_MAE);
if (dev->flags & IFF_PROMISC) {
rmr |= EMAC_RMR_PME;
} else if (dev->flags & IFF_ALLMULTI || 32 < dev->mc_count) {
/*
* Must be setting up to use multicast
* Now check for promiscuous multicast
*/
rmr |= EMAC_RMR_PMME;
} else if (dev->flags & IFF_MULTICAST && 0 < dev->mc_count) {
unsigned short em0gaht[4] = { 0, 0, 0, 0 };
struct dev_mc_list *dmi;
/* Need to hash on the multicast address. */
for (dmi = dev->mc_list; dmi; dmi = dmi->next) {
unsigned long mc_crc;
unsigned int bit_number;
mc_crc = ether_crc(6, (char *)dmi->dmi_addr);
bit_number = 63 - (mc_crc >> 26); /* MSB: 0 LSB: 63 */
em0gaht[bit_number >> 4] |=
0x8000 >> (bit_number & 0x0f);
}
emacp->em0gaht1 = em0gaht[0];
emacp->em0gaht2 = em0gaht[1];
emacp->em0gaht3 = em0gaht[2];
emacp->em0gaht4 = em0gaht[3];
/* Turn on multicast addressing */
rmr |= EMAC_RMR_MAE;
}
out_be32(&emacp->em0rmr, rmr);
}
static int emac_init_tah(struct ocp_enet_private *fep)
{
tah_t *tahp;
/* Initialize TAH and enable checksum verification */
tahp = (tah_t *) ioremap(fep->tah_dev->def->paddr, sizeof(*tahp));
if (tahp == NULL) {
printk(KERN_ERR "tah%d: Cannot ioremap TAH registers!\n",
fep->tah_dev->def->index);
return -ENOMEM;
}
out_be32(&tahp->tah_mr, TAH_MR_SR);
/* wait for reset to complete */
while (in_be32(&tahp->tah_mr) & TAH_MR_SR) ;
/* 10KB TAH TX FIFO accomodates the max MTU of 9000 */
out_be32(&tahp->tah_mr,
TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP |
TAH_MR_DIG);
iounmap(&tahp);
return 0;
}
static void emac_init_rings(struct net_device *dev)
{
struct ocp_enet_private *ep = dev->priv;
int loop;
ep->tx_desc = (struct mal_descriptor *)((char *)ep->mal->tx_virt_addr +
(ep->mal_tx_chan *
MAL_DT_ALIGN));
ep->rx_desc =
(struct mal_descriptor *)((char *)ep->mal->rx_virt_addr +
(ep->mal_rx_chan * MAL_DT_ALIGN));
/* Fill in the transmit descriptor ring. */
for (loop = 0; loop < NUM_TX_BUFF; loop++) {
if (ep->tx_skb[loop]) {
dma_unmap_single(&ep->ocpdev->dev,
ep->tx_desc[loop].data_ptr,
ep->tx_desc[loop].data_len,
DMA_TO_DEVICE);
dev_kfree_skb_irq(ep->tx_skb[loop]);
}
ep->tx_skb[loop] = NULL;
ep->tx_desc[loop].ctrl = 0;
ep->tx_desc[loop].data_len = 0;
ep->tx_desc[loop].data_ptr = NULL;
}
ep->tx_desc[loop - 1].ctrl |= MAL_TX_CTRL_WRAP;
/* Format the receive descriptor ring. */
ep->rx_slot = 0;
/* Default is MTU=1500 + Ethernet overhead */
ep->rx_buffer_size = dev->mtu + ENET_HEADER_SIZE + ENET_FCS_SIZE;
emac_rx_fill(dev, 0);
if (ep->rx_slot != 0) {
printk(KERN_ERR
"%s: Not enough mem for RxChain durning Open?\n",
dev->name);
/*We couldn't fill the ring at startup?
*We could clean up and fail to open but right now we will try to
*carry on. It may be a sign of a bad NUM_RX_BUFF value
*/
}
ep->tx_cnt = 0;
ep->tx_slot = 0;
ep->ack_slot = 0;
}
static void emac_reset_configure(struct ocp_enet_private *fep)
{
emac_t *emacp = fep->emacp;
int i;
mal_disable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
/*
* Check for a link, some PHYs don't provide a clock if
* no link is present. Some EMACs will not come out of
* soft reset without a PHY clock present.
*/
if (fep->phy_mii.def->ops->poll_link(&fep->phy_mii)) {
/* Reset the EMAC */
out_be32(&emacp->em0mr0, EMAC_M0_SRST);
udelay(20);
for (i = 0; i < 100; i++) {
if ((in_be32(&emacp->em0mr0) & EMAC_M0_SRST) == 0)
break;
udelay(10);
}
if (i >= 100) {
printk(KERN_ERR "%s: Cannot reset EMAC\n",
fep->ndev->name);
return;
}
}
/* Switch IRQs off for now */
out_be32(&emacp->em0iser, 0);
/* Configure MAL rx channel */
mal_set_rcbs(fep->mal, fep->mal_rx_chan, DESC_BUF_SIZE_REG);
/* set the high address */
out_be32(&emacp->em0iahr,
(fep->ndev->dev_addr[0] << 8) | fep->ndev->dev_addr[1]);
/* set the low address */
out_be32(&emacp->em0ialr,
(fep->ndev->dev_addr[2] << 24) | (fep->ndev->dev_addr[3] << 16)
| (fep->ndev->dev_addr[4] << 8) | fep->ndev->dev_addr[5]);
/* Adjust to link */
if (netif_carrier_ok(fep->ndev))
emac_adjust_to_link(fep);
/* enable broadcast/individual address and RX FIFO defaults */
out_be32(&emacp->em0rmr, EMAC_RMR_DEFAULT);
/* set transmit request threshold register */
out_be32(&emacp->em0trtr, EMAC_TRTR_DEFAULT);
/* Reconfigure multicast */
__emac_set_multicast_list(fep->ndev);
/* Set receiver/transmitter defaults */
out_be32(&emacp->em0rwmr, EMAC_RWMR_DEFAULT);
out_be32(&emacp->em0tmr0, EMAC_TMR0_DEFAULT);
out_be32(&emacp->em0tmr1, EMAC_TMR1_DEFAULT);
/* set frame gap */
out_be32(&emacp->em0ipgvr, CONFIG_IBM_EMAC_FGAP);
/* set VLAN Tag Protocol Identifier */
out_be32(&emacp->em0vtpid, 0x8100);
/* Init ring buffers */
emac_init_rings(fep->ndev);
}
static void emac_kick(struct ocp_enet_private *fep)
{
emac_t *emacp = fep->emacp;
unsigned long emac_ier;
emac_ier = EMAC_ISR_PP | EMAC_ISR_BP | EMAC_ISR_RP |
EMAC_ISR_SE | EMAC_ISR_PTLE | EMAC_ISR_ALE |
EMAC_ISR_BFCS | EMAC_ISR_ORE | EMAC_ISR_IRE;
out_be32(&emacp->em0iser, emac_ier);
/* enable all MAL transmit and receive channels */
mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
/* set transmit and receive enable */
out_be32(&emacp->em0mr0, EMAC_M0_TXE | EMAC_M0_RXE);
}
static void
emac_start_link(struct ocp_enet_private *fep, struct ethtool_cmd *ep)
{
u32 advertise;
int autoneg;
int forced_speed;
int forced_duplex;
/* Default advertise */
advertise = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full;
autoneg = fep->want_autoneg;
forced_speed = fep->phy_mii.speed;
forced_duplex = fep->phy_mii.duplex;
/* Setup link parameters */
if (ep) {
if (ep->autoneg == AUTONEG_ENABLE) {
advertise = ep->advertising;
autoneg = 1;
} else {
autoneg = 0;
forced_speed = ep->speed;
forced_duplex = ep->duplex;
}
}
/* Configure PHY & start aneg */
fep->want_autoneg = autoneg;
if (autoneg) {
LINK_DEBUG(("%s: start link aneg, advertise: 0x%x\n",
fep->ndev->name, advertise));
fep->phy_mii.def->ops->setup_aneg(&fep->phy_mii, advertise);
} else {
LINK_DEBUG(("%s: start link forced, speed: %d, duplex: %d\n",
fep->ndev->name, forced_speed, forced_duplex));
fep->phy_mii.def->ops->setup_forced(&fep->phy_mii, forced_speed,
forced_duplex);
}
fep->timer_ticks = 0;
mod_timer(&fep->link_timer, jiffies + HZ);
}
static void emac_link_timer(unsigned long data)
{
struct ocp_enet_private *fep = (struct ocp_enet_private *)data;
int link;
if (fep->going_away)
return;
spin_lock_irq(&fep->lock);
link = fep->phy_mii.def->ops->poll_link(&fep->phy_mii);
LINK_DEBUG(("%s: poll_link: %d\n", fep->ndev->name, link));
if (link == netif_carrier_ok(fep->ndev)) {
if (!link && fep->want_autoneg && (++fep->timer_ticks) > 10)
emac_start_link(fep, NULL);
goto out;
}
printk(KERN_INFO "%s: Link is %s\n", fep->ndev->name,
link ? "Up" : "Down");
if (link) {
netif_carrier_on(fep->ndev);
/* Chip needs a full reset on config change. That sucks, so I
* should ultimately move that to some tasklet to limit
* latency peaks caused by this code
*/
emac_reset_configure(fep);
if (fep->opened)
emac_kick(fep);
} else {
fep->timer_ticks = 0;
netif_carrier_off(fep->ndev);
}
out:
mod_timer(&fep->link_timer, jiffies + HZ);
spin_unlock_irq(&fep->lock);
}
static void emac_set_multicast_list(struct net_device *dev)
{
struct ocp_enet_private *fep = dev->priv;
spin_lock_irq(&fep->lock);
__emac_set_multicast_list(dev);
spin_unlock_irq(&fep->lock);
}
static int emac_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
{
struct ocp_enet_private *fep = ndev->priv;
cmd->supported = fep->phy_mii.def->features;
cmd->port = PORT_MII;
cmd->transceiver = XCVR_EXTERNAL;
cmd->phy_address = fep->mii_phy_addr;
spin_lock_irq(&fep->lock);
cmd->autoneg = fep->want_autoneg;
cmd->speed = fep->phy_mii.speed;
cmd->duplex = fep->phy_mii.duplex;
spin_unlock_irq(&fep->lock);
return 0;
}
static int emac_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
{
struct ocp_enet_private *fep = ndev->priv;
unsigned long features = fep->phy_mii.def->features;
if (!capable(CAP_NET_ADMIN))
return -EPERM;
if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE)
return -EINVAL;
if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0)
return -EINVAL;
if (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL)
return -EINVAL;
if (cmd->autoneg == AUTONEG_DISABLE)
switch (cmd->speed) {
case SPEED_10:
if (cmd->duplex == DUPLEX_HALF &&
(features & SUPPORTED_10baseT_Half) == 0)
return -EINVAL;
if (cmd->duplex == DUPLEX_FULL &&
(features & SUPPORTED_10baseT_Full) == 0)
return -EINVAL;
break;
case SPEED_100:
if (cmd->duplex == DUPLEX_HALF &&
(features & SUPPORTED_100baseT_Half) == 0)
return -EINVAL;
if (cmd->duplex == DUPLEX_FULL &&
(features & SUPPORTED_100baseT_Full) == 0)
return -EINVAL;
break;
case SPEED_1000:
if (cmd->duplex == DUPLEX_HALF &&
(features & SUPPORTED_1000baseT_Half) == 0)
return -EINVAL;
if (cmd->duplex == DUPLEX_FULL &&
(features & SUPPORTED_1000baseT_Full) == 0)
return -EINVAL;
break;
default:
return -EINVAL;
} else if ((features & SUPPORTED_Autoneg) == 0)
return -EINVAL;
spin_lock_irq(&fep->lock);
emac_start_link(fep, cmd);
spin_unlock_irq(&fep->lock);
return 0;
}
static void
emac_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info)
{
struct ocp_enet_private *fep = ndev->priv;
strcpy(info->driver, DRV_NAME);
strcpy(info->version, DRV_VERSION);
info->fw_version[0] = '\0';
sprintf(info->bus_info, "IBM EMAC %d", fep->ocpdev->def->index);
info->regdump_len = 0;
}
static int emac_nway_reset(struct net_device *ndev)
{
struct ocp_enet_private *fep = ndev->priv;
if (!fep->want_autoneg)
return -EINVAL;
spin_lock_irq(&fep->lock);
emac_start_link(fep, NULL);
spin_unlock_irq(&fep->lock);
return 0;
}
static u32 emac_get_link(struct net_device *ndev)
{
return netif_carrier_ok(ndev);
}
static struct ethtool_ops emac_ethtool_ops = {
.get_settings = emac_get_settings,
.set_settings = emac_set_settings,
.get_drvinfo = emac_get_drvinfo,
.nway_reset = emac_nway_reset,
.get_link = emac_get_link
};
static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
struct ocp_enet_private *fep = dev->priv;
uint *data = (uint *) & rq->ifr_ifru;
switch (cmd) {
case SIOCGMIIPHY:
data[0] = fep->mii_phy_addr;
/* Fall through */
case SIOCGMIIREG:
data[3] = emac_phy_read(dev, fep->mii_phy_addr, data[1]);
return 0;
case SIOCSMIIREG:
if (!capable(CAP_NET_ADMIN))
return -EPERM;
emac_phy_write(dev, fep->mii_phy_addr, data[1], data[2]);
return 0;
default:
return -EOPNOTSUPP;
}
}
static int emac_open(struct net_device *dev)
{
struct ocp_enet_private *fep = dev->priv;
int rc;
spin_lock_irq(&fep->lock);
fep->opened = 1;
netif_carrier_off(dev);
/* Reset & configure the chip */
emac_reset_configure(fep);
spin_unlock_irq(&fep->lock);
/* Request our interrupt lines */
rc = request_irq(dev->irq, emac_mac_irq, 0, "IBM EMAC MAC", dev);
if (rc != 0) {
printk("dev->irq %d failed\n", dev->irq);
goto bail;
}
/* Kick the chip rx & tx channels into life */
spin_lock_irq(&fep->lock);
emac_kick(fep);
spin_unlock_irq(&fep->lock);
netif_start_queue(dev);
bail:
return rc;
}
static int emac_close(struct net_device *dev)
{
struct ocp_enet_private *fep = dev->priv;
emac_t *emacp = fep->emacp;
/* XXX Stop IRQ emitting here */
spin_lock_irq(&fep->lock);
fep->opened = 0;
mal_disable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
netif_carrier_off(dev);
netif_stop_queue(dev);
/*
* Check for a link, some PHYs don't provide a clock if
* no link is present. Some EMACs will not come out of
* soft reset without a PHY clock present.
*/
if (fep->phy_mii.def->ops->poll_link(&fep->phy_mii)) {
out_be32(&emacp->em0mr0, EMAC_M0_SRST);
udelay(10);
if (emacp->em0mr0 & EMAC_M0_SRST) {
/*not sure what to do here hopefully it clears before another open */
printk(KERN_ERR
"%s: Phy SoftReset didn't clear, no link?\n",
dev->name);
}
}
/* Free the irq's */
free_irq(dev->irq, dev);
spin_unlock_irq(&fep->lock);
return 0;
}
static void emac_remove(struct ocp_device *ocpdev)
{
struct net_device *dev = ocp_get_drvdata(ocpdev);
struct ocp_enet_private *ep = dev->priv;
/* FIXME: locking, races, ... */
ep->going_away = 1;
ocp_set_drvdata(ocpdev, NULL);
if (ep->rgmii_dev)
emac_close_rgmii(ep->rgmii_dev);
if (ep->zmii_dev)
emac_close_zmii(ep->zmii_dev);
unregister_netdev(dev);
del_timer_sync(&ep->link_timer);
mal_unregister_commac(ep->mal, &ep->commac);
iounmap((void *)ep->emacp);
kfree(dev);
}
struct mal_commac_ops emac_commac_ops = {
.txeob = &emac_txeob_dev,
.txde = &emac_txde_dev,
.rxeob = &emac_rxeob_dev,
.rxde = &emac_rxde_dev,
};
#ifdef CONFIG_NET_POLL_CONTROLLER
static int emac_netpoll(struct net_device *ndev)
{
emac_rxeob_dev((void *)ndev, 0);
emac_txeob_dev((void *)ndev, 0);
return 0;
}
#endif
static int emac_init_device(struct ocp_device *ocpdev, struct ibm_ocp_mal *mal)
{
int deferred_init = 0;
int rc = 0, i;
struct net_device *ndev;
struct ocp_enet_private *ep;
struct ocp_func_emac_data *emacdata;
int commac_reg = 0;
u32 phy_map;
emacdata = (struct ocp_func_emac_data *)ocpdev->def->additions;
if (!emacdata) {
printk(KERN_ERR "emac%d: Missing additional data!\n",
ocpdev->def->index);
return -ENODEV;
}
/* Allocate our net_device structure */
ndev = alloc_etherdev(sizeof(struct ocp_enet_private));
if (ndev == NULL) {
printk(KERN_ERR
"emac%d: Could not allocate ethernet device.\n",
ocpdev->def->index);
return -ENOMEM;
}
ep = ndev->priv;
ep->ndev = ndev;
ep->ocpdev = ocpdev;
ndev->irq = ocpdev->def->irq;
ep->wol_irq = emacdata->wol_irq;
if (emacdata->mdio_idx >= 0) {
if (emacdata->mdio_idx == ocpdev->def->index) {
/* Set the common MDIO net_device */
mdio_ndev = ndev;
deferred_init = 1;
}
ep->mdio_dev = mdio_ndev;
} else {
ep->mdio_dev = ndev;
}
ocp_set_drvdata(ocpdev, ndev);
spin_lock_init(&ep->lock);
/* Fill out MAL informations and register commac */
ep->mal = mal;
ep->mal_tx_chan = emacdata->mal_tx_chan;
ep->mal_rx_chan = emacdata->mal_rx_chan;
ep->commac.ops = &emac_commac_ops;
ep->commac.dev = ndev;
ep->commac.tx_chan_mask = MAL_CHAN_MASK(ep->mal_tx_chan);
ep->commac.rx_chan_mask = MAL_CHAN_MASK(ep->mal_rx_chan);
rc = mal_register_commac(ep->mal, &ep->commac);
if (rc != 0)
goto bail;
commac_reg = 1;
/* Map our MMIOs */
ep->emacp = (emac_t *) ioremap(ocpdev->def->paddr, sizeof(emac_t));
/* Check if we need to attach to a ZMII */
if (emacdata->zmii_idx >= 0) {
ep->zmii_input = emacdata->zmii_mux;
ep->zmii_dev =
ocp_find_device(OCP_ANY_ID, OCP_FUNC_ZMII,
emacdata->zmii_idx);
if (ep->zmii_dev == NULL)
printk(KERN_WARNING
"emac%d: ZMII %d requested but not found !\n",
ocpdev->def->index, emacdata->zmii_idx);
else if ((rc =
emac_init_zmii(ep->zmii_dev, ep->zmii_input,
emacdata->phy_mode)) != 0)
goto bail;
}
/* Check if we need to attach to a RGMII */
if (emacdata->rgmii_idx >= 0) {
ep->rgmii_input = emacdata->rgmii_mux;
ep->rgmii_dev =
ocp_find_device(OCP_ANY_ID, OCP_FUNC_RGMII,
emacdata->rgmii_idx);
if (ep->rgmii_dev == NULL)
printk(KERN_WARNING
"emac%d: RGMII %d requested but not found !\n",
ocpdev->def->index, emacdata->rgmii_idx);
else if ((rc =
emac_init_rgmii(ep->rgmii_dev, ep->rgmii_input,
emacdata->phy_mode)) != 0)
goto bail;
}
/* Check if we need to attach to a TAH */
if (emacdata->tah_idx >= 0) {
ep->tah_dev =
ocp_find_device(OCP_ANY_ID, OCP_FUNC_TAH,
emacdata->tah_idx);
if (ep->tah_dev == NULL)
printk(KERN_WARNING
"emac%d: TAH %d requested but not found !\n",
ocpdev->def->index, emacdata->tah_idx);
else if ((rc = emac_init_tah(ep)) != 0)
goto bail;
}
if (deferred_init) {
if (!list_empty(&emac_init_list)) {
struct list_head *entry;
struct emac_def_dev *ddev;
list_for_each(entry, &emac_init_list) {
ddev =
list_entry(entry, struct emac_def_dev,
link);
emac_init_device(ddev->ocpdev, ddev->mal);
}
}
}
/* Init link monitoring timer */
init_timer(&ep->link_timer);
ep->link_timer.function = emac_link_timer;
ep->link_timer.data = (unsigned long)ep;
ep->timer_ticks = 0;
/* Fill up the mii_phy structure */
ep->phy_mii.dev = ndev;
ep->phy_mii.mdio_read = emac_phy_read;
ep->phy_mii.mdio_write = emac_phy_write;
ep->phy_mii.mode = emacdata->phy_mode;
/* Find PHY */
phy_map = emacdata->phy_map | busy_phy_map;
for (i = 0; i <= 0x1f; i++, phy_map >>= 1) {
if ((phy_map & 0x1) == 0) {
int val = emac_phy_read(ndev, i, MII_BMCR);
if (val != 0xffff && val != -1)
break;
}
}
if (i == 0x20) {
printk(KERN_WARNING "emac%d: Can't find PHY.\n",
ocpdev->def->index);
rc = -ENODEV;
goto bail;
}
busy_phy_map |= 1 << i;
ep->mii_phy_addr = i;
rc = mii_phy_probe(&ep->phy_mii, i);
if (rc) {
printk(KERN_WARNING "emac%d: Failed to probe PHY type.\n",
ocpdev->def->index);
rc = -ENODEV;
goto bail;
}
/* Setup initial PHY config & startup aneg */
if (ep->phy_mii.def->ops->init)
ep->phy_mii.def->ops->init(&ep->phy_mii);
netif_carrier_off(ndev);
if (ep->phy_mii.def->features & SUPPORTED_Autoneg)
ep->want_autoneg = 1;
emac_start_link(ep, NULL);
/* read the MAC Address */
for (i = 0; i < 6; i++)
ndev->dev_addr[i] = emacdata->mac_addr[i];
/* Fill in the driver function table */
ndev->open = &emac_open;
ndev->hard_start_xmit = &emac_start_xmit;
ndev->stop = &emac_close;
ndev->get_stats = &emac_stats;
if (emacdata->jumbo)
ndev->change_mtu = &emac_change_mtu;
ndev->set_mac_address = &emac_set_mac_address;
ndev->set_multicast_list = &emac_set_multicast_list;
ndev->do_ioctl = &emac_ioctl;
SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops);
if (emacdata->tah_idx >= 0)
ndev->features = NETIF_F_IP_CSUM | NETIF_F_SG;
#ifdef CONFIG_NET_POLL_CONTROLLER
ndev->poll_controller = emac_netpoll;
#endif
SET_MODULE_OWNER(ndev);
rc = register_netdev(ndev);
if (rc != 0)
goto bail;
printk("%s: IBM emac, MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
ndev->name,
ndev->dev_addr[0], ndev->dev_addr[1], ndev->dev_addr[2],
ndev->dev_addr[3], ndev->dev_addr[4], ndev->dev_addr[5]);
printk(KERN_INFO "%s: Found %s PHY (0x%02x)\n",
ndev->name, ep->phy_mii.def->name, ep->mii_phy_addr);
bail:
if (rc && commac_reg)
mal_unregister_commac(ep->mal, &ep->commac);
if (rc && ndev)
kfree(ndev);
return rc;
}
static int emac_probe(struct ocp_device *ocpdev)
{
struct ocp_device *maldev;
struct ibm_ocp_mal *mal;
struct ocp_func_emac_data *emacdata;
emacdata = (struct ocp_func_emac_data *)ocpdev->def->additions;
if (emacdata == NULL) {
printk(KERN_ERR "emac%d: Missing additional datas !\n",
ocpdev->def->index);
return -ENODEV;
}
/* Get the MAL device */
maldev = ocp_find_device(OCP_ANY_ID, OCP_FUNC_MAL, emacdata->mal_idx);
if (maldev == NULL) {
printk("No maldev\n");
return -ENODEV;
}
/*
* Get MAL driver data, it must be here due to link order.
* When the driver is modularized, symbol dependencies will
* ensure the MAL driver is already present if built as a
* module.
*/
mal = (struct ibm_ocp_mal *)ocp_get_drvdata(maldev);
if (mal == NULL) {
printk("No maldrv\n");
return -ENODEV;
}
/* If we depend on another EMAC for MDIO, wait for it to show up */
if (emacdata->mdio_idx >= 0 &&
(emacdata->mdio_idx != ocpdev->def->index) && !mdio_ndev) {
struct emac_def_dev *ddev;
/* Add this index to the deferred init table */
ddev = kmalloc(sizeof(struct emac_def_dev), GFP_KERNEL);
ddev->ocpdev = ocpdev;
ddev->mal = mal;
list_add_tail(&ddev->link, &emac_init_list);
} else {
emac_init_device(ocpdev, mal);
}
return 0;
}
/* Structure for a device driver */
static struct ocp_device_id emac_ids[] = {
{.vendor = OCP_ANY_ID,.function = OCP_FUNC_EMAC},
{.vendor = OCP_VENDOR_INVALID}
};
static struct ocp_driver emac_driver = {
.name = "emac",
.id_table = emac_ids,
.probe = emac_probe,
.remove = emac_remove,
};
static int __init emac_init(void)
{
printk(KERN_INFO DRV_NAME ": " DRV_DESC ", version " DRV_VERSION "\n");
printk(KERN_INFO "Maintained by " DRV_AUTHOR "\n");
if (skb_res > 2) {
printk(KERN_WARNING "Invalid skb_res: %d, cropping to 2\n",
skb_res);
skb_res = 2;
}
return ocp_register_driver(&emac_driver);
}
static void __exit emac_exit(void)
{
ocp_unregister_driver(&emac_driver);
}
module_init(emac_init);
module_exit(emac_exit);
![[BACK]](/icons/back.gif){kind=icon}
Return to ibm_emac_core.c CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [Development] / linux-2.6-xfs / drivers / net / ibm_emac