/*
* linux/drivers/acorn/net/etherh.c
*
* Copyright (C) 2000-2002 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* NS8390 I-cubed EtherH and ANT EtherM specific driver
* Thanks to I-Cubed for information on their cards.
* EtherM conversion (C) 1999 Chris Kemp and Tim Watterton
* EtherM integration (C) 2000 Aleph One Ltd (Tak-Shing Chan)
* EtherM integration re-engineered by Russell King.
*
* Changelog:
* 08-12-1996 RMK 1.00 Created
* RMK 1.03 Added support for EtherLan500 cards
* 23-11-1997 RMK 1.04 Added media autodetection
* 16-04-1998 RMK 1.05 Improved media autodetection
* 10-02-2000 RMK 1.06 Updated for 2.3.43
* 13-05-2000 RMK 1.07 Updated for 2.3.99-pre8
* 12-10-1999 CK/TEW EtherM driver first release
* 21-12-2000 TTC EtherH/EtherM integration
* 25-12-2000 RMK 1.08 Clean integration of EtherM into this driver.
* 03-01-2002 RMK 1.09 Always enable IRQs if we're in the nic slot.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/interrupt.h>
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/in.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/init.h>
#include <asm/system.h>
#include <asm/bitops.h>
#include <asm/ecard.h>
#include <asm/io.h>
#include <asm/irq.h>
#include "../8390.h"
#define NET_DEBUG 0
#define DEBUG_INIT 2
static unsigned int net_debug = NET_DEBUG;
struct etherh_priv {
struct ei_device eidev;
unsigned int id;
unsigned int ctrl_port;
unsigned int ctrl;
};
MODULE_AUTHOR("Russell King");
MODULE_DESCRIPTION("EtherH/EtherM driver");
MODULE_LICENSE("GPL");
static char version[] __initdata =
"EtherH/EtherM Driver (c) 2002 Russell King v1.09\n";
#define ETHERH500_DATAPORT 0x200 /* MEMC */
#define ETHERH500_NS8390 0x000 /* MEMC */
#define ETHERH500_CTRLPORT 0x200 /* IOC */
#define ETHERH600_DATAPORT 16 /* MEMC */
#define ETHERH600_NS8390 0x200 /* MEMC */
#define ETHERH600_CTRLPORT 0x080 /* MEMC */
#define ETHERH_CP_IE 1
#define ETHERH_CP_IF 2
#define ETHERH_CP_HEARTBEAT 2
#define ETHERH_TX_START_PAGE 1
#define ETHERH_STOP_PAGE 127
/*
* These came from CK/TEW
*/
#define ETHERM_DATAPORT 0x080 /* MEMC */
#define ETHERM_NS8390 0x200 /* MEMC */
#define ETHERM_CTRLPORT 0x08f /* MEMC */
#define ETHERM_TX_START_PAGE 64
#define ETHERM_STOP_PAGE 127
/* ------------------------------------------------------------------------ */
static inline void etherh_set_ctrl(struct etherh_priv *eh, unsigned int mask)
{
eh->ctrl |= mask;
outb(eh->ctrl, eh->ctrl_port);
}
static inline void etherh_clr_ctrl(struct etherh_priv *eh, unsigned int mask)
{
eh->ctrl &= ~mask;
outb(eh->ctrl, eh->ctrl_port);
}
static inline unsigned int etherh_get_stat(struct etherh_priv *eh)
{
return inb(eh->ctrl_port);
}
static void etherh_irq_enable(ecard_t *ec, int irqnr)
{
struct etherh_priv *eh = ec->irq_data;
etherh_set_ctrl(eh, ETHERH_CP_IE);
}
static void etherh_irq_disable(ecard_t *ec, int irqnr)
{
struct etherh_priv *eh = ec->irq_data;
etherh_clr_ctrl(eh, ETHERH_CP_IE);
}
static expansioncard_ops_t etherh_ops = {
.irqenable = etherh_irq_enable,
.irqdisable = etherh_irq_disable,
};
static void
etherh_setif(struct net_device *dev)
{
struct etherh_priv *eh = (struct etherh_priv *)dev->priv;
struct ei_device *ei_local = &eh->eidev;
unsigned long addr, flags;
local_irq_save(flags);
/* set the interface type */
switch (eh->id) {
case PROD_I3_ETHERLAN600:
case PROD_I3_ETHERLAN600A:
addr = dev->base_addr + EN0_RCNTHI;
switch (dev->if_port) {
case IF_PORT_10BASE2:
outb((inb(addr) & 0xf8) | 1, addr);
break;
case IF_PORT_10BASET:
outb((inb(addr) & 0xf8), addr);
break;
}
break;
case PROD_I3_ETHERLAN500:
switch (dev->if_port) {
case IF_PORT_10BASE2:
etherh_clr_ctrl(eh, ETHERH_CP_IF);
break;
case IF_PORT_10BASET:
etherh_set_ctrl(eh, ETHERH_CP_IF);
break;
}
break;
default:
break;
}
local_irq_restore(flags);
}
static int
etherh_getifstat(struct net_device *dev)
{
struct etherh_priv *eh = (struct etherh_priv *)dev->priv;
struct ei_device *ei_local = &eh->eidev;
int stat = 0;
switch (eh->id) {
case PROD_I3_ETHERLAN600:
case PROD_I3_ETHERLAN600A:
switch (dev->if_port) {
case IF_PORT_10BASE2:
stat = 1;
break;
case IF_PORT_10BASET:
stat = inb(dev->base_addr+EN0_RCNTHI) & 4;
break;
}
break;
case PROD_I3_ETHERLAN500:
switch (dev->if_port) {
case IF_PORT_10BASE2:
stat = 1;
break;
case IF_PORT_10BASET:
stat = etherh_get_stat(eh) & ETHERH_CP_HEARTBEAT;
break;
}
break;
default:
stat = 0;
break;
}
return stat != 0;
}
/*
* Configure the interface. Note that we ignore the other
* parts of ifmap, since its mostly meaningless for this driver.
*/
static int etherh_set_config(struct net_device *dev, struct ifmap *map)
{
switch (map->port) {
case IF_PORT_10BASE2:
case IF_PORT_10BASET:
/*
* If the user explicitly sets the interface
* media type, turn off automedia detection.
*/
dev->flags &= ~IFF_AUTOMEDIA;
dev->if_port = map->port;
break;
default:
return -EINVAL;
}
etherh_setif(dev);
return 0;
}
/*
* Reset the 8390 (hard reset). Note that we can't actually do this.
*/
static void
etherh_reset(struct net_device *dev)
{
struct ei_device *ei_local = (struct ei_device *) dev->priv;
outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, dev->base_addr);
/*
* See if we need to change the interface type.
* Note that we use 'interface_num' as a flag
* to indicate that we need to change the media.
*/
if (dev->flags & IFF_AUTOMEDIA && ei_local->interface_num) {
ei_local->interface_num = 0;
if (dev->if_port == IF_PORT_10BASET)
dev->if_port = IF_PORT_10BASE2;
else
dev->if_port = IF_PORT_10BASET;
etherh_setif(dev);
}
}
/*
* Write a block of data out to the 8390
*/
static void
etherh_block_output (struct net_device *dev, int count, const unsigned char *buf, int start_page)
{
struct ei_device *ei_local = (struct ei_device *) dev->priv;
unsigned int addr, dma_addr;
unsigned long dma_start;
if (ei_local->dmaing) {
printk(KERN_ERR "%s: DMAing conflict in etherh_block_input: "
" DMAstat %d irqlock %d\n", dev->name,
ei_local->dmaing, ei_local->irqlock);
return;
}
/*
* Make sure we have a round number of bytes if we're in word mode.
*/
if (count & 1 && ei_local->word16)
count++;
ei_local->dmaing = 1;
addr = dev->base_addr;
dma_addr = dev->mem_start;
count = (count + 1) & ~1;
outb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);
outb (0x42, addr + EN0_RCNTLO);
outb (0x00, addr + EN0_RCNTHI);
outb (0x42, addr + EN0_RSARLO);
outb (0x00, addr + EN0_RSARHI);
outb (E8390_RREAD | E8390_START, addr + E8390_CMD);
udelay (1);
outb (ENISR_RDC, addr + EN0_ISR);
outb (count, addr + EN0_RCNTLO);
outb (count >> 8, addr + EN0_RCNTHI);
outb (0, addr + EN0_RSARLO);
outb (start_page, addr + EN0_RSARHI);
outb (E8390_RWRITE | E8390_START, addr + E8390_CMD);
if (ei_local->word16)
outsw (dma_addr, buf, count >> 1);
else
outsb (dma_addr, buf, count);
dma_start = jiffies;
while ((inb (addr + EN0_ISR) & ENISR_RDC) == 0)
if (jiffies - dma_start > 2*HZ/100) { /* 20ms */
printk(KERN_ERR "%s: timeout waiting for TX RDC\n",
dev->name);
etherh_reset (dev);
NS8390_init (dev, 1);
break;
}
outb (ENISR_RDC, addr + EN0_ISR);
ei_local->dmaing = 0;
}
/*
* Read a block of data from the 8390
*/
static void
etherh_block_input (struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
{
struct ei_device *ei_local = (struct ei_device *) dev->priv;
unsigned int addr, dma_addr;
unsigned char *buf;
if (ei_local->dmaing) {
printk(KERN_ERR "%s: DMAing conflict in etherh_block_input: "
" DMAstat %d irqlock %d\n", dev->name,
ei_local->dmaing, ei_local->irqlock);
return;
}
ei_local->dmaing = 1;
addr = dev->base_addr;
dma_addr = dev->mem_start;
buf = skb->data;
outb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);
outb (count, addr + EN0_RCNTLO);
outb (count >> 8, addr + EN0_RCNTHI);
outb (ring_offset, addr + EN0_RSARLO);
outb (ring_offset >> 8, addr + EN0_RSARHI);
outb (E8390_RREAD | E8390_START, addr + E8390_CMD);
if (ei_local->word16) {
insw (dma_addr, buf, count >> 1);
if (count & 1)
buf[count - 1] = inb (dma_addr);
} else
insb (dma_addr, buf, count);
outb (ENISR_RDC, addr + EN0_ISR);
ei_local->dmaing = 0;
}
/*
* Read a header from the 8390
*/
static void
etherh_get_header (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
{
struct ei_device *ei_local = (struct ei_device *) dev->priv;
unsigned int addr, dma_addr;
if (ei_local->dmaing) {
printk(KERN_ERR "%s: DMAing conflict in etherh_get_header: "
" DMAstat %d irqlock %d\n", dev->name,
ei_local->dmaing, ei_local->irqlock);
return;
}
ei_local->dmaing = 1;
addr = dev->base_addr;
dma_addr = dev->mem_start;
outb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);
outb (sizeof (*hdr), addr + EN0_RCNTLO);
outb (0, addr + EN0_RCNTHI);
outb (0, addr + EN0_RSARLO);
outb (ring_page, addr + EN0_RSARHI);
outb (E8390_RREAD | E8390_START, addr + E8390_CMD);
if (ei_local->word16)
insw (dma_addr, hdr, sizeof (*hdr) >> 1);
else
insb (dma_addr, hdr, sizeof (*hdr));
outb (ENISR_RDC, addr + EN0_ISR);
ei_local->dmaing = 0;
}
/*
* Open/initialize the board. This is called (in the current kernel)
* sometime after booting when the 'ifconfig' program is run.
*
* This routine should set everything up anew at each open, even
* registers that "should" only need to be set once at boot, so that
* there is non-reboot way to recover if something goes wrong.
*/
static int
etherh_open(struct net_device *dev)
{
struct ei_device *ei_local = (struct ei_device *) dev->priv;
if (!is_valid_ether_addr(dev->dev_addr)) {
printk(KERN_WARNING "%s: invalid ethernet MAC address\n",
dev->name);
return -EINVAL;
}
if (request_irq(dev->irq, ei_interrupt, 0, dev->name, dev))
return -EAGAIN;
/*
* Make sure that we aren't going to change the
* media type on the next reset - we are about to
* do automedia manually now.
*/
ei_local->interface_num = 0;
/*
* If we are doing automedia detection, do it now.
* This is more reliable than the 8390's detection.
*/
if (dev->flags & IFF_AUTOMEDIA) {
dev->if_port = IF_PORT_10BASET;
etherh_setif(dev);
mdelay(1);
if (!etherh_getifstat(dev)) {
dev->if_port = IF_PORT_10BASE2;
etherh_setif(dev);
}
} else
etherh_setif(dev);
etherh_reset(dev);
ei_open(dev);
return 0;
}
/*
* The inverse routine to etherh_open().
*/
static int
etherh_close(struct net_device *dev)
{
ei_close (dev);
free_irq (dev->irq, dev);
return 0;
}
/*
* Initialisation
*/
static void __init etherh_banner(void)
{
static int version_printed;
if (net_debug && version_printed++ == 0)
printk(KERN_INFO "%s", version);
}
/*
* Read the ethernet address string from the on board rom.
* This is an ascii string...
*/
static int __init etherh_addr(char *addr, struct expansion_card *ec)
{
struct in_chunk_dir cd;
char *s;
if (ecard_readchunk(&cd, ec, 0xf5, 0) && (s = strchr(cd.d.string, '('))) {
int i;
for (i = 0; i < 6; i++) {
addr[i] = simple_strtoul(s + 1, &s, 0x10);
if (*s != (i == 5? ')' : ':'))
break;
}
if (i == 6)
return 0;
}
return -ENODEV;
}
/*
* Create an ethernet address from the system serial number.
*/
static int __init etherm_addr(char *addr)
{
unsigned int serial;
if (system_serial_low == 0 && system_serial_high == 0)
return -ENODEV;
serial = system_serial_low | system_serial_high;
addr[0] = 0;
addr[1] = 0;
addr[2] = 0xa4;
addr[3] = 0x10 + (serial >> 24);
addr[4] = serial >> 16;
addr[5] = serial >> 8;
return 0;
}
static u32 etherh_regoffsets[16];
static u32 etherm_regoffsets[16];
static int __init
etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct ei_device *ei_local;
struct net_device *dev;
struct etherh_priv *eh;
const char *dev_type;
int i, size, ret;
etherh_banner();
dev = alloc_etherdev(sizeof(struct etherh_priv));
if (!dev) {
ret = -ENOMEM;
goto out;
}
/*
* alloc_etherdev allocs and zeros dev->priv
*/
eh = dev->priv;
spin_lock_init(&eh->eidev.page_lock);
SET_MODULE_OWNER(dev);
dev->open = etherh_open;
dev->stop = etherh_close;
dev->set_config = etherh_set_config;
dev->irq = ec->irq;
dev->base_addr = ecard_address(ec, ECARD_MEMC, 0);
/*
* IRQ and control port handling
*/
if (ec->irq != 11) {
ec->ops = ðerh_ops;
ec->irq_data = eh;
}
eh->ctrl = 0;
eh->id = ec->cid.product;
switch (ec->cid.product) {
case PROD_ANT_ETHERM:
etherm_addr(dev->dev_addr);
dev->base_addr += ETHERM_NS8390;
dev->mem_start = dev->base_addr + ETHERM_DATAPORT;
eh->ctrl_port = dev->base_addr + ETHERM_CTRLPORT;
break;
case PROD_I3_ETHERLAN500:
etherh_addr(dev->dev_addr, ec);
dev->base_addr += ETHERH500_NS8390;
dev->mem_start = dev->base_addr + ETHERH500_DATAPORT;
eh->ctrl_port = ecard_address (ec, ECARD_IOC, ECARD_FAST)
+ ETHERH500_CTRLPORT;
break;
case PROD_I3_ETHERLAN600:
case PROD_I3_ETHERLAN600A:
etherh_addr(dev->dev_addr, ec);
dev->base_addr += ETHERH600_NS8390;
dev->mem_start = dev->base_addr + ETHERH600_DATAPORT;
eh->ctrl_port = dev->base_addr + ETHERH600_CTRLPORT;
break;
default:
printk(KERN_ERR "%s: unknown card type %x\n",
dev->name, ec->cid.product);
ret = -ENODEV;
goto free;
}
size = 16;
if (ec->cid.product == PROD_ANT_ETHERM)
size <<= 3;
if (!request_region(dev->base_addr, size, dev->name)) {
ret = -EBUSY;
goto free;
}
if (ethdev_init(dev)) {
ret = -ENODEV;
goto release;
}
/*
* If we're in the NIC slot, make sure the IRQ is enabled
*/
if (dev->irq == 11)
etherh_set_ctrl(eh, ETHERH_CP_IE);
/*
* Unfortunately, ethdev_init eventually calls
* ether_setup, which re-writes dev->flags.
*/
switch (ec->cid.product) {
case PROD_ANT_ETHERM:
dev_type = "ANT EtherM";
dev->if_port = IF_PORT_UNKNOWN;
break;
case PROD_I3_ETHERLAN500:
dev_type = "i3 EtherH 500";
dev->if_port = IF_PORT_UNKNOWN;
break;
case PROD_I3_ETHERLAN600:
dev_type = "i3 EtherH 600";
dev->flags |= IFF_PORTSEL | IFF_AUTOMEDIA;
dev->if_port = IF_PORT_10BASET;
break;
case PROD_I3_ETHERLAN600A:
dev_type = "i3 EtherH 600A";
dev->flags |= IFF_PORTSEL | IFF_AUTOMEDIA;
dev->if_port = IF_PORT_10BASET;
break;
default:
dev_type = "unknown";
break;
}
ei_local = (struct ei_device *) dev->priv;
if (ec->cid.product == PROD_ANT_ETHERM) {
ei_local->tx_start_page = ETHERM_TX_START_PAGE;
ei_local->stop_page = ETHERM_STOP_PAGE;
ei_local->reg_offset = etherm_regoffsets;
} else {
ei_local->tx_start_page = ETHERH_TX_START_PAGE;
ei_local->stop_page = ETHERH_STOP_PAGE;
ei_local->reg_offset = etherh_regoffsets;
}
ei_local->name = dev->name;
ei_local->word16 = 1;
ei_local->rx_start_page = ei_local->tx_start_page + TX_PAGES;
ei_local->reset_8390 = etherh_reset;
ei_local->block_input = etherh_block_input;
ei_local->block_output = etherh_block_output;
ei_local->get_8390_hdr = etherh_get_header;
ei_local->interface_num = 0;
etherh_reset(dev);
NS8390_init(dev, 0);
ret = register_netdev(dev);
if (ret)
goto release;
printk(KERN_INFO "%s: %s in slot %d, ",
dev->name, dev_type, ec->slot_no);
for (i = 0; i < 6; i++)
printk("%2.2x%c", dev->dev_addr[i], i == 5 ? '\n' : ':');
ecard_set_drvdata(ec, dev);
return 0;
release:
release_region(dev->base_addr, 16);
free:
free_netdev(dev);
out:
return ret;
}
static void __devexit etherh_remove(struct expansion_card *ec)
{
struct net_device *dev = ecard_get_drvdata(ec);
int size = 16;
ecard_set_drvdata(ec, NULL);
unregister_netdev(dev);
if (ec->cid.product == PROD_ANT_ETHERM)
size <<= 3;
release_region(dev->base_addr, size);
free_netdev(dev);
ec->ops = NULL;
kfree(ec->irq_data);
}
static const struct ecard_id etherh_ids[] = {
{ MANU_ANT, PROD_ANT_ETHERM },
{ MANU_I3, PROD_I3_ETHERLAN500 },
{ MANU_I3, PROD_I3_ETHERLAN600 },
{ MANU_I3, PROD_I3_ETHERLAN600A },
{ 0xffff, 0xffff }
};
static struct ecard_driver etherh_driver = {
.probe = etherh_probe,
.remove = __devexit_p(etherh_remove),
.id_table = etherh_ids,
.drv = {
.name = "etherh",
},
};
static int __init etherh_init(void)
{
int i;
for (i = 0; i < 16; i++) {
etherh_regoffsets[i] = i;
etherm_regoffsets[i] = i << 3;
}
return ecard_register_driver(ðerh_driver);
}
static void __exit etherh_exit(void)
{
ecard_remove_driver(ðerh_driver);
}
module_init(etherh_init);
module_exit(etherh_exit);
![[BACK]](/icons/back.gif){kind=icon}
Return to etherh.c CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [Development] / linux-2.6-xfs / drivers / net / arm