/*
VES1820 - Single Chip Cable Channel Receiver driver module
used on the the Siemens DVB-C cards
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/slab.h>
#include "dvb_frontend.h"
#include "dvb_functions.h"
#if 0
#define dprintk(x...) printk(x)
#else
#define dprintk(x...)
#endif
#define MAX_UNITS 4
static int pwm[MAX_UNITS] = { -1, -1, -1, -1 };
static int verbose;
/**
* since we need only a few bits to store internal state we don't allocate
* extra memory but use frontend->data as bitfield
*/
#define SET_PWM(data,pwm) do { \
(long) data &= ~0xff; \
(long) data |= pwm; \
} while (0)
#define SET_REG0(data,reg0) do { \
(long) data &= ~(0xff << 8); \
(long) data |= reg0 << 8; \
} while (0)
#define SET_TUNER(data,type) do { \
(long) data &= ~(0xff << 16); \
(long) data |= type << 16; \
} while (0)
#define SET_DEMOD_ADDR(data,type) do { \
(long) data &= ~(0xff << 24); \
(long) data |= type << 24; \
} while (0)
#define GET_PWM(data) ((u8) ((long) data & 0xff))
#define GET_REG0(data) ((u8) (((long) data >> 8) & 0xff))
#define GET_TUNER(data) ((u8) (((long) data >> 16) & 0xff))
#define GET_DEMOD_ADDR(data) ((u8) (((long) data >> 24) & 0xff))
#define XIN 57840000UL
#define FIN (XIN >> 4)
static struct dvb_frontend_info ves1820_info = {
.name = "VES1820 based DVB-C frontend",
.type = FE_QAM,
.frequency_stepsize = 62500,
.frequency_min = 51000000,
.frequency_max = 858000000,
.symbol_rate_min = (XIN/2)/64, /* SACLK/64 == (XIN/2)/64 */
.symbol_rate_max = (XIN/2)/4, /* SACLK/4 */
#if 0
.frequency_tolerance = ???,
.symbol_rate_tolerance = ???, /* ppm */ /* == 8% (spec p. 5) */
.notifier_delay = ?,
#endif
.caps = FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 |
FE_CAN_QAM_128 | FE_CAN_QAM_256 |
FE_CAN_FEC_AUTO | FE_CAN_INVERSION_AUTO |
FE_CAN_CLEAN_SETUP | FE_CAN_RECOVER
};
static u8 ves1820_inittab [] =
{
0x69, 0x6A, 0x9B, 0x12, 0x12, 0x46, 0x26, 0x1A,
0x43, 0x6A, 0xAA, 0xAA, 0x1E, 0x85, 0x43, 0x28,
0xE0, 0x00, 0xA1, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00,
0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x40
};
static int ves1820_writereg (struct dvb_frontend *fe, u8 reg, u8 data)
{
u8 addr = GET_DEMOD_ADDR(fe->data);
u8 buf[] = { 0x00, reg, data };
struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = 3 };
struct dvb_i2c_bus *i2c = fe->i2c;
int ret;
ret = i2c->xfer (i2c, &msg, 1);
if (ret != 1)
printk("DVB: VES1820(%d): %s, writereg error "
"(reg == 0x%02x, val == 0x%02x, ret == %i)\n",
fe->i2c->adapter->num, __FUNCTION__, reg, data, ret);
dvb_delay(10);
return (ret != 1) ? -EREMOTEIO : 0;
}
static u8 ves1820_readreg (struct dvb_frontend *fe, u8 reg)
{
u8 b0 [] = { 0x00, reg };
u8 b1 [] = { 0 };
u8 addr = GET_DEMOD_ADDR(fe->data);
struct i2c_msg msg [] = { { .addr = addr, .flags = 0, .buf = b0, .len = 2 },
{ .addr = addr, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
struct dvb_i2c_bus *i2c = fe->i2c;
int ret;
ret = i2c->xfer (i2c, msg, 2);
if (ret != 2)
printk("DVB: VES1820(%d): %s: readreg error (ret == %i)\n",
fe->i2c->adapter->num, __FUNCTION__, ret);
return b1[0];
}
static int tuner_write (struct dvb_i2c_bus *i2c, u8 addr, u8 data [4])
{
int ret;
struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = data, .len = 4 };
ret = i2c->xfer (i2c, &msg, 1);
if (ret != 1)
printk("DVB: VES1820(%d): %s: i/o error (ret == %i)\n",
i2c->adapter->num, __FUNCTION__, ret);
return (ret != 1) ? -EREMOTEIO : 0;
}
/**
* set up the downconverter frequency divisor for a
* reference clock comparision frequency of 62.5 kHz.
*/
static int tuner_set_tv_freq (struct dvb_frontend *fe, u32 freq)
{
u32 div, ifreq;
static u8 addr [] = { 0x61, 0x62 };
static u8 byte3 [] = { 0x8e, 0x85 };
int tuner_type = GET_TUNER(fe->data);
u8 buf [4];
if (tuner_type == 0xff) /* PLL not reachable over i2c ... */
return 0;
if (strstr (fe->i2c->adapter->name, "Technotrend") ||
strstr (fe->i2c->adapter->name, "TT-Budget"))
ifreq = 35937500;
else
ifreq = 36125000;
div = (freq + ifreq + 31250) / 62500;
buf[0] = (div >> 8) & 0x7f;
buf[1] = div & 0xff;
buf[2] = byte3[tuner_type];
if (tuner_type == 1) {
buf[2] |= (div >> 10) & 0x60;
buf[3] = (freq < 174000000 ? 0x88 :
freq < 470000000 ? 0x84 : 0x81);
} else {
buf[3] = (freq < 174000000 ? 0xa1 :
freq < 454000000 ? 0x92 : 0x34);
}
return tuner_write (fe->i2c, addr[tuner_type], buf);
}
static int ves1820_setup_reg0 (struct dvb_frontend *fe, u8 reg0,
fe_spectral_inversion_t inversion)
{
reg0 |= GET_REG0(fe->data) & 0x62;
if (INVERSION_ON == inversion)
reg0 &= ~0x20;
else if (INVERSION_OFF == inversion)
reg0 |= 0x20;
ves1820_writereg (fe, 0x00, reg0 & 0xfe);
ves1820_writereg (fe, 0x00, reg0 | 0x01);
/**
* check lock and toggle inversion bit if required...
*/
if (INVERSION_AUTO == inversion && !(ves1820_readreg (fe, 0x11) & 0x08)) {
dvb_delay(10);
if (!(ves1820_readreg (fe, 0x11) & 0x08)) {
reg0 ^= 0x20;
ves1820_writereg (fe, 0x00, reg0 & 0xfe);
ves1820_writereg (fe, 0x00, reg0 | 0x01);
}
}
SET_REG0(fe->data, reg0);
return 0;
}
static int ves1820_init (struct dvb_frontend *fe)
{
int i;
dprintk("DVB: VES1820(%d): init chip\n", fe->i2c->adapter->num);
ves1820_writereg (fe, 0, 0);
for (i=0; i<53; i++)
ves1820_writereg (fe, i, ves1820_inittab[i]);
ves1820_writereg (fe, 0x34, GET_PWM(fe->data));
return 0;
}
static int ves1820_set_symbolrate (struct dvb_frontend *fe, u32 symbolrate)
{
s32 BDR;
s32 BDRI;
s16 SFIL=0;
u16 NDEC = 0;
u32 tmp, ratio;
if (symbolrate > XIN/2)
symbolrate = XIN/2;
if (symbolrate < 500000)
symbolrate = 500000;
if (symbolrate < XIN/16) NDEC = 1;
if (symbolrate < XIN/32) NDEC = 2;
if (symbolrate < XIN/64) NDEC = 3;
if (symbolrate < (u32)(XIN/12.3)) SFIL = 1;
if (symbolrate < (u32)(XIN/16)) SFIL = 0;
if (symbolrate < (u32)(XIN/24.6)) SFIL = 1;
if (symbolrate < (u32)(XIN/32)) SFIL = 0;
if (symbolrate < (u32)(XIN/49.2)) SFIL = 1;
if (symbolrate < (u32)(XIN/64)) SFIL = 0;
if (symbolrate < (u32)(XIN/98.4)) SFIL = 1;
symbolrate <<= NDEC;
ratio = (symbolrate << 4) / FIN;
tmp = ((symbolrate << 4) % FIN) << 8;
ratio = (ratio << 8) + tmp / FIN;
tmp = (tmp % FIN) << 8;
ratio = (ratio << 8) + (tmp + FIN/2) / FIN;
BDR = ratio;
BDRI = (((XIN << 5) / symbolrate) + 1) / 2;
if (BDRI > 0xFF)
BDRI = 0xFF;
SFIL = (SFIL << 4) | ves1820_inittab[0x0E];
NDEC = (NDEC << 6) | ves1820_inittab[0x03];
ves1820_writereg (fe, 0x03, NDEC);
ves1820_writereg (fe, 0x0a, BDR&0xff);
ves1820_writereg (fe, 0x0b, (BDR>> 8)&0xff);
ves1820_writereg (fe, 0x0c, (BDR>>16)&0x3f);
ves1820_writereg (fe, 0x0d, BDRI);
ves1820_writereg (fe, 0x0e, SFIL);
return 0;
}
static int ves1820_set_parameters (struct dvb_frontend *fe,
struct dvb_frontend_parameters *p)
{
static const u8 reg0x00 [] = { 0x00, 0x04, 0x08, 0x0c, 0x10 };
static const u8 reg0x01 [] = { 140, 140, 106, 100, 92 };
static const u8 reg0x05 [] = { 135, 100, 70, 54, 38 };
static const u8 reg0x08 [] = { 162, 116, 67, 52, 35 };
static const u8 reg0x09 [] = { 145, 150, 106, 126, 107 };
int real_qam = p->u.qam.modulation - QAM_16;
if (real_qam < 0 || real_qam > 4)
return -EINVAL;
tuner_set_tv_freq (fe, p->frequency);
ves1820_set_symbolrate (fe, p->u.qam.symbol_rate);
ves1820_writereg (fe, 0x34, GET_PWM(fe->data));
ves1820_writereg (fe, 0x01, reg0x01[real_qam]);
ves1820_writereg (fe, 0x05, reg0x05[real_qam]);
ves1820_writereg (fe, 0x08, reg0x08[real_qam]);
ves1820_writereg (fe, 0x09, reg0x09[real_qam]);
ves1820_setup_reg0 (fe, reg0x00[real_qam], p->inversion);
return 0;
}
static int ves1820_ioctl (struct dvb_frontend *fe, unsigned int cmd, void *arg)
{
switch (cmd) {
case FE_GET_INFO:
memcpy (arg, &ves1820_info, sizeof(struct dvb_frontend_info));
break;
case FE_READ_STATUS:
{
fe_status_t *status = (fe_status_t *) arg;
int sync;
*status = 0;
sync = ves1820_readreg (fe, 0x11);
if (sync & 2)
*status |= FE_HAS_SIGNAL;
if (sync & 2)
*status |= FE_HAS_CARRIER;
if (sync & 2) /* XXX FIXME! */
*status |= FE_HAS_VITERBI;
if (sync & 4)
*status |= FE_HAS_SYNC;
if (sync & 8)
*status |= FE_HAS_LOCK;
break;
}
case FE_READ_BER:
{
u32 ber = ves1820_readreg(fe, 0x14) |
(ves1820_readreg(fe, 0x15) << 8) |
((ves1820_readreg(fe, 0x16) & 0x0f) << 16);
*((u32*) arg) = 10 * ber;
break;
}
case FE_READ_SIGNAL_STRENGTH:
{
u8 gain = ves1820_readreg(fe, 0x17);
*((u16*) arg) = (gain << 8) | gain;
break;
}
case FE_READ_SNR:
{
u8 quality = ~ves1820_readreg(fe, 0x18);
*((u16*) arg) = (quality << 8) | quality;
break;
}
case FE_READ_UNCORRECTED_BLOCKS:
*((u32*) arg) = ves1820_readreg (fe, 0x13) & 0x7f;
if (*((u32*) arg) == 0x7f)
*((u32*) arg) = 0xffffffff;
/* reset uncorrected block counter */
ves1820_writereg (fe, 0x10, ves1820_inittab[0x10] & 0xdf);
ves1820_writereg (fe, 0x10, ves1820_inittab[0x10]);
break;
case FE_SET_FRONTEND:
return ves1820_set_parameters (fe, arg);
case FE_GET_FRONTEND:
{
struct dvb_frontend_parameters *p = (struct dvb_frontend_parameters *)arg;
u8 reg0 = GET_REG0(fe->data);
int sync;
s8 afc = 0;
sync = ves1820_readreg (fe, 0x11);
if (sync & 2)
/* AFC only valid when carrier has been recovered */
afc = ves1820_readreg(fe, 0x19);
if (verbose)
printk ("DVB: VES1820(%d): AFC (%d) %dHz\n",
fe->i2c->adapter->num, afc,
-((s32)(p->u.qam.symbol_rate >> 3) * afc >> 7));
p->inversion = reg0 & 0x20 ? INVERSION_OFF : INVERSION_ON;
p->u.qam.modulation = ((reg0 >> 2) & 7) + QAM_16;
p->u.qam.fec_inner = FEC_NONE;
p->frequency = ((p->frequency + 31250) / 62500) * 62500;
// To prevent overflow, shift symbol rate first a
// couple of bits.
p->frequency -= (s32)(p->u.qam.symbol_rate >> 3) * afc >> 7;
break;
}
case FE_SLEEP:
ves1820_writereg (fe, 0x1b, 0x02); /* pdown ADC */
ves1820_writereg (fe, 0x00, 0x80); /* standby */
break;
case FE_INIT:
return ves1820_init (fe);
default:
return -EINVAL;
}
return 0;
}
static long probe_tuner (struct dvb_i2c_bus *i2c)
{
static const struct i2c_msg msg1 =
{ .addr = 0x61, .flags = 0, .buf = NULL, .len = 0 };
static const struct i2c_msg msg2 =
{ .addr = 0x62, .flags = 0, .buf = NULL, .len = 0 };
int type;
if (i2c->xfer(i2c, &msg1, 1) == 1) {
type = 0;
printk ("DVB: VES1820(%d): setup for tuner spXXXX\n", i2c->adapter->num);
} else if (i2c->xfer(i2c, &msg2, 1) == 1) {
type = 1;
printk ("DVB: VES1820(%d): setup for tuner sp5659c\n", i2c->adapter->num);
} else {
type = -1;
printk ("DVB: VES1820(%d): unknown PLL, "
"please report to <linuxdvb@linuxtv.org>!!\n", i2c->adapter->num);
}
return type;
}
static u8 read_pwm (struct dvb_i2c_bus *i2c)
{
u8 b = 0xff;
u8 pwm;
struct i2c_msg msg [] = { { .addr = 0x50, .flags = 0, .buf = &b, .len = 1 },
{ .addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1 } };
i2c->xfer (i2c, msg, 2);
printk("DVB: VES1820(%d): pwm=0x%02x\n", i2c->adapter->num, pwm);
if (pwm == 0xff)
pwm = 0x48;
return pwm;
}
static long probe_demod_addr (struct dvb_i2c_bus *i2c)
{
u8 b [] = { 0x00, 0x1a };
u8 id;
struct i2c_msg msg [] = { { .addr = 0x08, .flags = 0, .buf = b, .len = 2 },
{ .addr = 0x08, .flags = I2C_M_RD, .buf = &id, .len = 1 } };
if (i2c->xfer(i2c, msg, 2) == 2 && (id & 0xf0) == 0x70)
return msg[0].addr;
msg[0].addr = msg[1].addr = 0x09;
if (i2c->xfer(i2c, msg, 2) == 2 && (id & 0xf0) == 0x70)
return msg[0].addr;
return -1;
}
static int ves1820_attach (struct dvb_i2c_bus *i2c, void **data)
{
void *priv = NULL;
long demod_addr;
long tuner_type;
if ((demod_addr = probe_demod_addr(i2c)) < 0)
return -ENODEV;
if ((tuner_type = probe_tuner(i2c)) < 0)
return -ENODEV;
if ((i2c->adapter->num < MAX_UNITS) && pwm[i2c->adapter->num] != -1) {
printk("DVB: VES1820(%d): pwm=0x%02x (user specified)\n",
i2c->adapter->num, pwm[i2c->adapter->num]);
SET_PWM(priv, pwm[i2c->adapter->num]);
}
else
SET_PWM(priv, read_pwm(i2c));
SET_REG0(priv, ves1820_inittab[0]);
SET_TUNER(priv, tuner_type);
SET_DEMOD_ADDR(priv, demod_addr);
return dvb_register_frontend (ves1820_ioctl, i2c, priv, &ves1820_info);
}
static void ves1820_detach (struct dvb_i2c_bus *i2c, void *data)
{
dvb_unregister_frontend (ves1820_ioctl, i2c);
}
static int __init init_ves1820 (void)
{
int i;
for (i = 0; i < MAX_UNITS; i++)
if (pwm[i] < -1 || pwm[i] > 255)
return -EINVAL;
return dvb_register_i2c_device (THIS_MODULE,
ves1820_attach, ves1820_detach);
}
static void __exit exit_ves1820 (void)
{
dvb_unregister_i2c_device (ves1820_attach);
}
module_init(init_ves1820);
module_exit(exit_ves1820);
MODULE_PARM(pwm, "1-" __MODULE_STRING(MAX_UNITS) "i");
MODULE_PARM_DESC(pwm, "override PWM value stored in EEPROM (tuner calibration)");
MODULE_PARM(verbose, "i");
MODULE_PARM_DESC(verbose, "print AFC offset after tuning for debugging the PWM setting");
MODULE_DESCRIPTION("VES1820 DVB-C frontend driver");
MODULE_AUTHOR("Ralph Metzler, Holger Waechtler");
MODULE_LICENSE("GPL");
![[BACK]](/icons/back.gif){kind=icon}
Return to ves1820.c CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [Development] / linux-2.6-xfs / drivers / media / dvb / frontends