/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2001-2003 Silicon Graphics, Inc. All rights reserved.
*/
#include <linux/types.h>
#include <linux/module.h>
#include <asm/sn/sgi.h>
#include <asm/sn/arch.h>
#include <asm/sn/pci/pciio.h>
#include <asm/sn/pci/pcibr.h>
#include <asm/sn/pci/pcibr_private.h>
#include <asm/sn/pci/pci_defs.h>
#include <asm/sn/io.h>
#include <asm/sn/sn_private.h>
#ifdef __ia64
inline int
compare_and_swap_ptr(void **location, void *old_ptr, void *new_ptr)
{
/* FIXME - compare_and_swap_ptr NOT ATOMIC */
if (*location == old_ptr) {
*location = new_ptr;
return 1;
}
else
return 0;
}
#endif
unsigned int pcibr_intr_bits(pciio_info_t info, pciio_intr_line_t lines, int nslots);
pcibr_intr_t pcibr_intr_alloc(vertex_hdl_t, device_desc_t, pciio_intr_line_t, vertex_hdl_t);
void pcibr_intr_free(pcibr_intr_t);
void pcibr_setpciint(xtalk_intr_t);
int pcibr_intr_connect(pcibr_intr_t, intr_func_t, intr_arg_t);
void pcibr_intr_disconnect(pcibr_intr_t);
vertex_hdl_t pcibr_intr_cpu_get(pcibr_intr_t);
extern pcibr_info_t pcibr_info_get(vertex_hdl_t);
/* =====================================================================
* INTERRUPT MANAGEMENT
*/
unsigned int
pcibr_intr_bits(pciio_info_t info,
pciio_intr_line_t lines, int nslots)
{
pciio_slot_t slot = PCIBR_INFO_SLOT_GET_INT(info);
unsigned bbits = 0;
/*
* Currently favored mapping from PCI
* slot number and INTA/B/C/D to Bridge
* PCI Interrupt Bit Number:
*
* SLOT A B C D
* 0 0 4 0 4
* 1 1 5 1 5
* 2 2 6 2 6
* 3 3 7 3 7
* 4 4 0 4 0
* 5 5 1 5 1
* 6 6 2 6 2
* 7 7 3 7 3
*/
if (slot < nslots) {
if (lines & (PCIIO_INTR_LINE_A| PCIIO_INTR_LINE_C))
bbits |= 1 << slot;
if (lines & (PCIIO_INTR_LINE_B| PCIIO_INTR_LINE_D))
bbits |= 1 << (slot ^ 4);
}
return bbits;
}
/*
* On SN systems there is a race condition between a PIO read response
* and DMA's. In rare cases, the read response may beat the DMA, causing
* the driver to think that data in memory is complete and meaningful.
* This code eliminates that race.
* This routine is called by the PIO read routines after doing the read.
* This routine then forces a fake interrupt on another line, which
* is logically associated with the slot that the PIO is addressed to.
* (see sn_dma_flush_init() )
* It then spins while watching the memory location that the interrupt
* is targetted to. When the interrupt response arrives, we are sure
* that the DMA has landed in memory and it is safe for the driver
* to proceed.
*/
extern struct sn_flush_nasid_entry flush_nasid_list[MAX_NASIDS];
void
sn_dma_flush(unsigned long addr)
{
nasid_t nasid;
int wid_num;
struct sn_flush_device_list *p;
int i,j;
int bwin;
unsigned long flags;
nasid = NASID_GET(addr);
wid_num = SWIN_WIDGETNUM(addr);
bwin = BWIN_WINDOWNUM(addr);
if (flush_nasid_list[nasid].widget_p == NULL) return;
if (bwin > 0) {
unsigned long itte = flush_nasid_list[nasid].iio_itte[bwin];
wid_num = (itte >> IIO_ITTE_WIDGET_SHIFT) &
IIO_ITTE_WIDGET_MASK;
}
if (flush_nasid_list[nasid].widget_p == NULL) return;
if (flush_nasid_list[nasid].widget_p[wid_num] == NULL) return;
p = &flush_nasid_list[nasid].widget_p[wid_num][0];
/* find a matching BAR */
for (i=0; i<DEV_PER_WIDGET;i++) {
for (j=0; j<PCI_ROM_RESOURCE;j++) {
if (p->bar_list[j].start == 0) break;
if (addr >= p->bar_list[j].start && addr <= p->bar_list[j].end) break;
}
if (j < PCI_ROM_RESOURCE && p->bar_list[j].start != 0) break;
p++;
}
/* if no matching BAR, return without doing anything. */
if (i == DEV_PER_WIDGET) return;
spin_lock_irqsave(&p->flush_lock, flags);
p->flush_addr = 0;
/* force an interrupt. */
*(volatile uint32_t *)(p->force_int_addr) = 1;
/* wait for the interrupt to come back. */
while (p->flush_addr != 0x10f);
/* okay, everything is synched up. */
spin_unlock_irqrestore(&p->flush_lock, flags);
}
EXPORT_SYMBOL(sn_dma_flush);
/*
* There are end cases where a deadlock can occur if interrupt
* processing completes and the Bridge b_int_status bit is still set.
*
* One scenerio is if a second PCI interrupt occurs within 60ns of
* the previous interrupt being cleared. In this case the Bridge
* does not detect the transition, the Bridge b_int_status bit
* remains set, and because no transition was detected no interrupt
* packet is sent to the Hub/Heart.
*
* A second scenerio is possible when a b_int_status bit is being
* shared by multiple devices:
* Device #1 generates interrupt
* Bridge b_int_status bit set
* Device #2 generates interrupt
* interrupt processing begins
* ISR for device #1 runs and
* clears interrupt
* Device #1 generates interrupt
* ISR for device #2 runs and
* clears interrupt
* (b_int_status bit still set)
* interrupt processing completes
*
* Interrupt processing is now complete, but an interrupt is still
* outstanding for Device #1. But because there was no transition of
* the b_int_status bit, no interrupt packet will be generated and
* a deadlock will occur.
*
* To avoid these deadlock situations, this function is used
* to check if a specific Bridge b_int_status bit is set, and if so,
* cause the setting of the corresponding interrupt bit.
*
* On a XBridge (SN1) and PIC (SN2), we do this by writing the appropriate Bridge Force
* Interrupt register.
*/
void
pcibr_force_interrupt(pcibr_intr_t intr)
{
unsigned bit;
unsigned bits;
pcibr_soft_t pcibr_soft = intr->bi_soft;
bits = intr->bi_ibits;
for (bit = 0; bit < 8; bit++) {
if (bits & (1 << bit)) {
PCIBR_DEBUG((PCIBR_DEBUG_INTR, pcibr_soft->bs_vhdl,
"pcibr_force_interrupt: bit=0x%x\n", bit));
pcireg_force_intr_set(pcibr_soft, bit);
}
}
}
/*ARGSUSED */
pcibr_intr_t
pcibr_intr_alloc(vertex_hdl_t pconn_vhdl,
device_desc_t dev_desc,
pciio_intr_line_t lines,
vertex_hdl_t owner_dev)
{
pcibr_info_t pcibr_info = pcibr_info_get(pconn_vhdl);
pciio_slot_t pciio_slot = PCIBR_INFO_SLOT_GET_INT(pcibr_info);
pcibr_soft_t pcibr_soft = (pcibr_soft_t) pcibr_info->f_mfast;
vertex_hdl_t xconn_vhdl = pcibr_soft->bs_conn;
int is_threaded = 0;
xtalk_intr_t *xtalk_intr_p;
pcibr_intr_t *pcibr_intr_p;
pcibr_intr_list_t *intr_list_p;
unsigned pcibr_int_bits;
unsigned pcibr_int_bit;
xtalk_intr_t xtalk_intr = (xtalk_intr_t)0;
hub_intr_t hub_intr;
pcibr_intr_t pcibr_intr;
pcibr_intr_list_t intr_entry;
pcibr_intr_list_t intr_list;
PCIBR_DEBUG_ALWAYS((PCIBR_DEBUG_INTR_ALLOC, pconn_vhdl,
"pcibr_intr_alloc: %s%s%s%s%s\n",
!(lines & 15) ? " No INTs?" : "",
lines & 1 ? " INTA" : "",
lines & 2 ? " INTB" : "",
lines & 4 ? " INTC" : "",
lines & 8 ? " INTD" : ""));
pcibr_intr = kmalloc(sizeof (*(pcibr_intr)), GFP_KERNEL);
if (!pcibr_intr)
return NULL;
memset(pcibr_intr, 0, sizeof (*(pcibr_intr)));
pcibr_intr->bi_dev = pconn_vhdl;
pcibr_intr->bi_lines = lines;
pcibr_intr->bi_soft = pcibr_soft;
pcibr_intr->bi_ibits = 0; /* bits will be added below */
pcibr_intr->bi_func = 0; /* unset until connect */
pcibr_intr->bi_arg = 0; /* unset until connect */
pcibr_intr->bi_flags = is_threaded ? 0 : PCIIO_INTR_NOTHREAD;
pcibr_intr->bi_mustruncpu = CPU_NONE;
pcibr_intr->bi_ibuf.ib_in = 0;
pcibr_intr->bi_ibuf.ib_out = 0;
spin_lock_init(&pcibr_intr->bi_ibuf.ib_lock);
pcibr_int_bits = pcibr_soft->bs_intr_bits((pciio_info_t)pcibr_info,
lines, PCIBR_NUM_SLOTS(pcibr_soft));
/*
* For each PCI interrupt line requested, figure
* out which Bridge PCI Interrupt Line it maps
* to, and make sure there are xtalk resources
* allocated for it.
*/
PCIBR_DEBUG_ALWAYS((PCIBR_DEBUG_INTR_ALLOC, pconn_vhdl,
"pcibr_intr_alloc: pcibr_int_bits: 0x%x\n", pcibr_int_bits));
for (pcibr_int_bit = 0; pcibr_int_bit < 8; pcibr_int_bit ++) {
if (pcibr_int_bits & (1 << pcibr_int_bit)) {
xtalk_intr_p = &pcibr_soft->bs_intr[pcibr_int_bit].bsi_xtalk_intr;
xtalk_intr = *xtalk_intr_p;
if (xtalk_intr == NULL) {
/*
* This xtalk_intr_alloc is constrained for two reasons:
* 1) Normal interrupts and error interrupts need to be delivered
* through a single xtalk target widget so that there aren't any
* ordering problems with DMA, completion interrupts, and error
* interrupts. (Use of xconn_vhdl forces this.)
*
* 2) On SN1, addressing constraints on SN1 and Bridge force
* us to use a single PI number for all interrupts from a
* single Bridge. (SN1-specific code forces this).
*/
/*
* All code dealing with threaded PCI interrupt handlers
* is located at the pcibr level. Because of this,
* we always want the lower layers (hub/heart_intr_alloc,
* intr_level_connect) to treat us as non-threaded so we
* don't set up a duplicate threaded environment. We make
* this happen by calling a special xtalk interface.
*/
xtalk_intr = xtalk_intr_alloc_nothd(xconn_vhdl, dev_desc,
owner_dev);
PCIBR_DEBUG_ALWAYS((PCIBR_DEBUG_INTR_ALLOC, pconn_vhdl,
"pcibr_intr_alloc: xtalk_intr=0x%lx\n", xtalk_intr));
/* both an assert and a runtime check on this:
* we need to check in non-DEBUG kernels, and
* the ASSERT gets us more information when
* we use DEBUG kernels.
*/
ASSERT(xtalk_intr != NULL);
if (xtalk_intr == NULL) {
/* it is quite possible that our
* xtalk_intr_alloc failed because
* someone else got there first,
* and we can find their results
* in xtalk_intr_p.
*/
if (!*xtalk_intr_p) {
printk(KERN_ALERT "pcibr_intr_alloc %s: "
"unable to get xtalk interrupt resources",
pcibr_soft->bs_name);
/* yes, we leak resources here. */
return 0;
}
} else if (compare_and_swap_ptr((void **) xtalk_intr_p, NULL, xtalk_intr)) {
/*
* now tell the bridge which slot is
* using this interrupt line.
*/
pcireg_intr_device_bit_clr(pcibr_soft,
BRIDGE_INT_DEV_MASK(pcibr_int_bit));
pcireg_intr_device_bit_set(pcibr_soft,
(pciio_slot << BRIDGE_INT_DEV_SHFT(pcibr_int_bit)));
PCIBR_DEBUG_ALWAYS((PCIBR_DEBUG_INTR_ALLOC, pconn_vhdl,
"bridge intr bit %d clears my wrb\n",
pcibr_int_bit));
} else {
/* someone else got one allocated first;
* free the one we just created, and
* retrieve the one they allocated.
*/
xtalk_intr_free(xtalk_intr);
xtalk_intr = *xtalk_intr_p;
}
}
pcibr_intr->bi_ibits |= 1 << pcibr_int_bit;
intr_entry = kmalloc(sizeof (*(intr_entry)), GFP_KERNEL);
if ( !intr_entry ) {
printk(KERN_ALERT "pcibr_intr_alloc %s: "
"unable to get memory",
pcibr_soft->bs_name);
return 0;
}
memset(intr_entry, 0, sizeof (*(intr_entry)));
intr_entry->il_next = NULL;
intr_entry->il_intr = pcibr_intr;
intr_entry->il_soft = pcibr_soft;
intr_entry->il_slot = pciio_slot;
intr_list_p =
&pcibr_soft->bs_intr[pcibr_int_bit].bsi_pcibr_intr_wrap.iw_list;
PCIBR_DEBUG_ALWAYS((PCIBR_DEBUG_INTR_ALLOC, pconn_vhdl,
"Bridge bit 0x%x wrap=0x%lx\n", pcibr_int_bit,
&(pcibr_soft->bs_intr[pcibr_int_bit].bsi_pcibr_intr_wrap)));
if (compare_and_swap_ptr((void **) intr_list_p, NULL, intr_entry)) {
/* we are the first interrupt on this bridge bit.
*/
PCIBR_DEBUG_ALWAYS((PCIBR_DEBUG_INTR_ALLOC, pconn_vhdl,
"INT 0x%x (bridge bit %d) allocated [FIRST]\n",
pcibr_int_bits, pcibr_int_bit));
continue;
}
intr_list = *intr_list_p;
pcibr_intr_p = &intr_list->il_intr;
if (compare_and_swap_ptr((void **) pcibr_intr_p, NULL, pcibr_intr)) {
/* first entry on list was erased,
* and we replaced it, so we
* don't need our intr_entry.
*/
kfree(intr_entry);
PCIBR_DEBUG_ALWAYS((PCIBR_DEBUG_INTR_ALLOC, pconn_vhdl,
"INT 0x%x (bridge bit %d) replaces erased first\n",
pcibr_int_bits, pcibr_int_bit));
continue;
}
intr_list_p = &intr_list->il_next;
if (compare_and_swap_ptr((void **) intr_list_p, NULL, intr_entry)) {
/* we are the new second interrupt on this bit.
*/
pcibr_soft->bs_intr[pcibr_int_bit].bsi_pcibr_intr_wrap.iw_shared = 1;
PCIBR_DEBUG_ALWAYS((PCIBR_DEBUG_INTR_ALLOC, pconn_vhdl,
"INT 0x%x (bridge bit %d) is new SECOND\n",
pcibr_int_bits, pcibr_int_bit));
continue;
}
while (1) {
pcibr_intr_p = &intr_list->il_intr;
if (compare_and_swap_ptr((void **) pcibr_intr_p, NULL, pcibr_intr)) {
/* an entry on list was erased,
* and we replaced it, so we
* don't need our intr_entry.
*/
kfree(intr_entry);
PCIBR_DEBUG_ALWAYS((PCIBR_DEBUG_INTR_ALLOC, pconn_vhdl,
"INT 0x%x (bridge bit %d) replaces erase Nth\n",
pcibr_int_bits, pcibr_int_bit));
break;
}
intr_list_p = &intr_list->il_next;
if (compare_and_swap_ptr((void **) intr_list_p, NULL, intr_entry)) {
/* entry appended to share list
*/
PCIBR_DEBUG_ALWAYS((PCIBR_DEBUG_INTR_ALLOC, pconn_vhdl,
"INT 0x%x (bridge bit %d) is new Nth\n",
pcibr_int_bits, pcibr_int_bit));
break;
}
/* step to next record in chain
*/
intr_list = *intr_list_p;
}
}
}
hub_intr = (hub_intr_t)xtalk_intr;
pcibr_intr->bi_irq = hub_intr->i_bit;
pcibr_intr->bi_cpu = hub_intr->i_cpuid;
PCIBR_DEBUG_ALWAYS((PCIBR_DEBUG_INTR_ALLOC, pconn_vhdl,
"pcibr_intr_alloc complete: pcibr_intr=0x%lx\n", pcibr_intr));
return pcibr_intr;
}
/*ARGSUSED */
void
pcibr_intr_free(pcibr_intr_t pcibr_intr)
{
unsigned pcibr_int_bits = pcibr_intr->bi_ibits;
pcibr_soft_t pcibr_soft = pcibr_intr->bi_soft;
unsigned pcibr_int_bit;
pcibr_intr_list_t intr_list;
int intr_shared;
xtalk_intr_t *xtalk_intrp;
for (pcibr_int_bit = 0; pcibr_int_bit < 8; pcibr_int_bit++) {
if (pcibr_int_bits & (1 << pcibr_int_bit)) {
for (intr_list =
pcibr_soft->bs_intr[pcibr_int_bit].bsi_pcibr_intr_wrap.iw_list;
intr_list != NULL;
intr_list = intr_list->il_next)
if (compare_and_swap_ptr((void **) &intr_list->il_intr,
pcibr_intr,
NULL)) {
PCIBR_DEBUG_ALWAYS((PCIBR_DEBUG_INTR_ALLOC,
pcibr_intr->bi_dev,
"pcibr_intr_free: cleared hdlr from bit 0x%x\n",
pcibr_int_bit));
}
/* If this interrupt line is not being shared between multiple
* devices release the xtalk interrupt resources.
*/
intr_shared =
pcibr_soft->bs_intr[pcibr_int_bit].bsi_pcibr_intr_wrap.iw_shared;
xtalk_intrp = &pcibr_soft->bs_intr[pcibr_int_bit].bsi_xtalk_intr;
if ((!intr_shared) && (*xtalk_intrp)) {
xtalk_intr_free(*xtalk_intrp);
*xtalk_intrp = 0;
/* Clear the PCI device interrupt to bridge interrupt pin
* mapping.
*/
pcireg_intr_device_bit_clr(pcibr_soft,
BRIDGE_INT_DEV_MASK(pcibr_int_bit));
}
}
}
kfree(pcibr_intr);
}
void
pcibr_setpciint(xtalk_intr_t xtalk_intr)
{
iopaddr_t addr;
xtalk_intr_vector_t vect;
vertex_hdl_t vhdl;
int bus_num;
int pcibr_int_bit;
void *bridge;
addr = xtalk_intr_addr_get(xtalk_intr);
vect = xtalk_intr_vector_get(xtalk_intr);
vhdl = xtalk_intr_dev_get(xtalk_intr);
/* bus and int_bits are stored in sfarg, bus bit3, int_bits bit2:0 */
pcibr_int_bit = *((int *)xtalk_intr_sfarg_get(xtalk_intr)) & 0x7;
bus_num = ((*((int *)xtalk_intr_sfarg_get(xtalk_intr)) & 0x8) >> 3);
bridge = pcibr_bridge_ptr_get(vhdl, bus_num);
pcireg_bridge_intr_addr_vect_set(bridge, pcibr_int_bit, vect);
pcireg_bridge_intr_addr_addr_set(bridge, pcibr_int_bit, addr);
}
/*ARGSUSED */
int
pcibr_intr_connect(pcibr_intr_t pcibr_intr, intr_func_t intr_func, intr_arg_t intr_arg)
{
pcibr_soft_t pcibr_soft = pcibr_intr->bi_soft;
unsigned pcibr_int_bits = pcibr_intr->bi_ibits;
unsigned pcibr_int_bit;
unsigned long s;
if (pcibr_intr == NULL)
return -1;
PCIBR_DEBUG_ALWAYS((PCIBR_DEBUG_INTR_ALLOC, pcibr_intr->bi_dev,
"pcibr_intr_connect: intr_func=0x%lx, intr_arg=0x%lx\n",
intr_func, intr_arg));
pcibr_intr->bi_func = intr_func;
pcibr_intr->bi_arg = intr_arg;
*((volatile unsigned *)&pcibr_intr->bi_flags) |= PCIIO_INTR_CONNECTED;
/*
* For each PCI interrupt line requested, figure
* out which Bridge PCI Interrupt Line it maps
* to, and make sure there are xtalk resources
* allocated for it.
*/
for (pcibr_int_bit = 0; pcibr_int_bit < 8; pcibr_int_bit++)
if (pcibr_int_bits & (1 << pcibr_int_bit)) {
pcibr_intr_wrap_t intr_wrap;
xtalk_intr_t xtalk_intr;
void *int_addr;
xtalk_intr = pcibr_soft->bs_intr[pcibr_int_bit].bsi_xtalk_intr;
intr_wrap = &pcibr_soft->bs_intr[pcibr_int_bit].bsi_pcibr_intr_wrap;
/*
* If this interrupt line is being shared and the connect has
* already been done, no need to do it again.
*/
if (pcibr_soft->bs_intr[pcibr_int_bit].bsi_pcibr_intr_wrap.iw_connected)
continue;
/*
* Use the pcibr wrapper function to handle all Bridge interrupts
* regardless of whether the interrupt line is shared or not.
*/
int_addr = pcireg_intr_addr_addr(pcibr_soft, pcibr_int_bit);
pcibr_soft->bs_intr[pcibr_int_bit].bsi_int_bit =
((pcibr_soft->bs_busnum << 3) | pcibr_int_bit);
xtalk_intr_connect(xtalk_intr,
NULL,
(intr_arg_t) intr_wrap,
(xtalk_intr_setfunc_t) pcibr_setpciint,
&pcibr_soft->bs_intr[pcibr_int_bit].bsi_int_bit);
pcibr_soft->bs_intr[pcibr_int_bit].bsi_pcibr_intr_wrap.iw_connected = 1;
PCIBR_DEBUG_ALWAYS((PCIBR_DEBUG_INTR_ALLOC, pcibr_intr->bi_dev,
"pcibr_setpciint: int_addr=0x%lx, *int_addr=0x%lx, "
"pcibr_int_bit=0x%x\n", int_addr,
pcireg_intr_addr_get(pcibr_soft, pcibr_int_bit),
pcibr_int_bit));
}
s = pcibr_lock(pcibr_soft);
pcireg_intr_enable_bit_set(pcibr_soft, pcibr_int_bits);
pcireg_tflush_get(pcibr_soft);
pcibr_unlock(pcibr_soft, s);
return 0;
}
/*ARGSUSED */
void
pcibr_intr_disconnect(pcibr_intr_t pcibr_intr)
{
pcibr_soft_t pcibr_soft = pcibr_intr->bi_soft;
unsigned pcibr_int_bits = pcibr_intr->bi_ibits;
unsigned pcibr_int_bit;
pcibr_intr_wrap_t intr_wrap;
unsigned long s;
/* Stop calling the function. Now.
*/
*((volatile unsigned *)&pcibr_intr->bi_flags) &= ~PCIIO_INTR_CONNECTED;
pcibr_intr->bi_func = 0;
pcibr_intr->bi_arg = 0;
/*
* For each PCI interrupt line requested, figure
* out which Bridge PCI Interrupt Line it maps
* to, and disconnect the interrupt.
*/
/* don't disable interrupts for lines that
* are shared between devices.
*/
for (pcibr_int_bit = 0; pcibr_int_bit < 8; pcibr_int_bit++)
if ((pcibr_int_bits & (1 << pcibr_int_bit)) &&
(pcibr_soft->bs_intr[pcibr_int_bit].bsi_pcibr_intr_wrap.iw_shared))
pcibr_int_bits &= ~(1 << pcibr_int_bit);
if (!pcibr_int_bits)
return;
s = pcibr_lock(pcibr_soft);
pcireg_intr_enable_bit_clr(pcibr_soft, pcibr_int_bits);
pcireg_tflush_get(pcibr_soft); /* wait until Bridge PIO complete */
pcibr_unlock(pcibr_soft, s);
PCIBR_DEBUG_ALWAYS((PCIBR_DEBUG_INTR_ALLOC, pcibr_intr->bi_dev,
"pcibr_intr_disconnect: disabled int_bits=0x%x\n",
pcibr_int_bits));
for (pcibr_int_bit = 0; pcibr_int_bit < 8; pcibr_int_bit++)
if (pcibr_int_bits & (1 << pcibr_int_bit)) {
/* if the interrupt line is now shared,
* do not disconnect it.
*/
if (pcibr_soft->bs_intr[pcibr_int_bit].bsi_pcibr_intr_wrap.iw_shared)
continue;
xtalk_intr_disconnect(pcibr_soft->bs_intr[pcibr_int_bit].bsi_xtalk_intr);
pcibr_soft->bs_intr[pcibr_int_bit].bsi_pcibr_intr_wrap.iw_connected = 0;
PCIBR_DEBUG_ALWAYS((PCIBR_DEBUG_INTR_ALLOC, pcibr_intr->bi_dev,
"pcibr_intr_disconnect: disconnect int_bits=0x%x\n",
pcibr_int_bits));
/* if we are sharing the interrupt line,
* connect us up; this closes the hole
* where the another pcibr_intr_alloc()
* was in progress as we disconnected.
*/
intr_wrap = &pcibr_soft->bs_intr[pcibr_int_bit].bsi_pcibr_intr_wrap;
if (!pcibr_soft->bs_intr[pcibr_int_bit].bsi_pcibr_intr_wrap.iw_shared)
continue;
pcibr_soft->bs_intr[pcibr_int_bit].bsi_int_bit =
((pcibr_soft->bs_busnum << 3) | pcibr_int_bit);
xtalk_intr_connect(pcibr_soft->bs_intr[pcibr_int_bit].bsi_xtalk_intr,
NULL,
(intr_arg_t) intr_wrap,
(xtalk_intr_setfunc_t) pcibr_setpciint,
&pcibr_soft->bs_intr[pcibr_int_bit].bsi_int_bit);
PCIBR_DEBUG_ALWAYS((PCIBR_DEBUG_INTR_ALLOC, pcibr_intr->bi_dev,
"pcibr_intr_disconnect: now-sharing int_bits=0x%x\n",
pcibr_int_bit));
}
}
/*ARGSUSED */
vertex_hdl_t
pcibr_intr_cpu_get(pcibr_intr_t pcibr_intr)
{
pcibr_soft_t pcibr_soft = pcibr_intr->bi_soft;
unsigned pcibr_int_bits = pcibr_intr->bi_ibits;
unsigned pcibr_int_bit;
for (pcibr_int_bit = 0; pcibr_int_bit < 8; pcibr_int_bit++)
if (pcibr_int_bits & (1 << pcibr_int_bit))
return xtalk_intr_cpu_get(pcibr_soft->bs_intr[pcibr_int_bit].bsi_xtalk_intr);
return 0;
}
/* =====================================================================
* INTERRUPT HANDLING
*/
void
pcibr_clearwidint(pcibr_soft_t pcibr_soft)
{
pcireg_intr_dst_set(pcibr_soft, 0);
}
void
pcibr_setwidint(xtalk_intr_t intr)
{
xwidgetnum_t targ = xtalk_intr_target_get(intr);
iopaddr_t addr = xtalk_intr_addr_get(intr);
xtalk_intr_vector_t vect = xtalk_intr_vector_get(intr);
pcibr_soft_t bridge = (pcibr_soft_t)xtalk_intr_sfarg_get(intr);
pcireg_intr_dst_target_id_set(bridge, targ);
pcireg_intr_dst_addr_set(bridge, addr);
pcireg_intr_host_err_set(bridge, vect);
}
![[BACK]](/icons/back.gif){kind=icon}
Return to pcibr_intr.c CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [Development] / linux-2.6-xfs / arch / ia64 / sn / io / sn2 / pcibr