/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1992 - 1997, 2000,2002-2003 Silicon Graphics, Inc. All rights reserved.
*/
#include <linux/types.h>
#include <linux/slab.h>
#include <asm/smp.h>
#include <asm/sn/sgi.h>
#include <asm/sn/io.h>
#include <asm/sn/iograph.h>
#include <asm/sn/hcl.h>
#include <asm/sn/labelcl.h>
#include <asm/sn/sn_private.h>
#include <asm/sn/klconfig.h>
#include <asm/sn/sn_cpuid.h>
#include <asm/sn/pci/pciio.h>
#include <asm/sn/pci/pcibr.h>
#include <asm/sn/xtalk/xtalk.h>
#include <asm/sn/pci/pcibr_private.h>
#include <asm/sn/intr.h>
#include <asm/sn/ioerror_handling.h>
#include <asm/sn/ioerror.h>
#include <asm/sn/sn2/shubio.h>
error_state_t error_state_get(vertex_hdl_t v);
error_return_code_t error_state_set(vertex_hdl_t v,error_state_t new_state);
/*
* Get the xtalk provider function pointer for the
* specified hub.
*/
/*ARGSUSED*/
int
hub_xp_error_handler(
vertex_hdl_t hub_v,
nasid_t nasid,
int error_code,
ioerror_mode_t mode,
ioerror_t *ioerror)
{
/*REFERENCED*/
hubreg_t iio_imem;
vertex_hdl_t xswitch;
error_state_t e_state;
cnodeid_t cnode;
/*
* Before walking down to the next level, check if
* the I/O link is up. If it's been disabled by the
* hub ii for some reason, we can't even touch the
* widget registers.
*/
iio_imem = REMOTE_HUB_L(nasid, IIO_IMEM);
if (!(iio_imem & (IIO_IMEM_B0ESD|IIO_IMEM_W0ESD))){
/*
* IIO_IMEM_B0ESD getting set, indicates II shutdown
* on HUB0 parts.. Hopefully that's not true for
* Hub1 parts..
*
*
* If either one of them is shut down, can't
* go any further.
*/
return IOERROR_XTALKLEVEL;
}
/* Get the error state of the hub */
e_state = error_state_get(hub_v);
cnode = nasid_to_cnodeid(nasid);
xswitch = NODEPDA(cnode)->basew_xc;
/* Set the error state of the crosstalk device to that of
* hub.
*/
if (error_state_set(xswitch , e_state) ==
ERROR_RETURN_CODE_CANNOT_SET_STATE)
return(IOERROR_UNHANDLED);
/* Clean the error state of the hub if we are in the action handling
* phase.
*/
if (e_state == ERROR_STATE_ACTION)
(void)error_state_set(hub_v, ERROR_STATE_NONE);
/* hand the error off to the switch or the directly
* connected crosstalk device.
*/
return xtalk_error_handler(xswitch,
error_code, mode, ioerror);
}
/*
* Check if the widget in error has been enabled for PIO accesses
*/
int
is_widget_pio_enabled(ioerror_t *ioerror)
{
cnodeid_t src_node;
nasid_t src_nasid;
hubreg_t ii_iowa;
xwidgetnum_t widget;
iopaddr_t p;
/* Get the node where the PIO error occurred */
IOERROR_GETVALUE(p,ioerror, srcnode);
src_node = p;
if (src_node == CNODEID_NONE)
return(0);
/* Get the nasid for the cnode */
src_nasid = cnodeid_to_nasid(src_node);
if (src_nasid == INVALID_NASID)
return(0);
/* Read the Outbound widget access register for this hub */
ii_iowa = REMOTE_HUB_L(src_nasid, IIO_IOWA);
IOERROR_GETVALUE(p,ioerror, widgetnum);
widget = p;
/* Check if the PIOs to the widget with PIO error have been
* enabled.
*/
if (ii_iowa & IIO_IOWA_WIDGET(widget))
return(1);
return(0);
}
/*
* Hub IO error handling.
*
* Gets invoked for different types of errors found at the hub.
* Typically this includes situations from bus error or due to
* an error interrupt (mostly generated at the hub).
*/
int
hub_ioerror_handler(
vertex_hdl_t hub_v,
int error_code,
int mode,
struct io_error_s *ioerror)
{
hubinfo_t hinfo; /* Hub info pointer */
nasid_t nasid;
int retval = 0;
/*REFERENCED*/
iopaddr_t p;
caddr_t cp;
hubinfo_get(hub_v, &hinfo);
if (!hinfo){
/* Print an error message and return */
goto end;
}
nasid = hinfo->h_nasid;
switch(error_code) {
case PIO_READ_ERROR:
/*
* Cpu got a bus error while accessing IO space.
* hubaddr field in ioerror structure should have
* the IO address that caused access error.
*/
/*
* Identify if the physical address in hub_error_data
* corresponds to small/large window, and accordingly,
* get the xtalk address.
*/
/*
* Evaluate the widget number and the widget address that
* caused the error. Use 'vaddr' if it's there.
* This is typically true either during probing
* or a kernel driver getting into trouble.
* Otherwise, use paddr to figure out widget details
* This is typically true for user mode bus errors while
* accessing I/O space.
*/
IOERROR_GETVALUE(cp,ioerror,vaddr);
if (cp){
/*
* If neither in small window nor in large window range,
* outright reject it.
*/
IOERROR_GETVALUE(cp,ioerror,vaddr);
if (NODE_SWIN_ADDR(nasid, (paddr_t)cp)){
iopaddr_t hubaddr;
xwidgetnum_t widgetnum;
iopaddr_t xtalkaddr;
IOERROR_GETVALUE(p,ioerror,hubaddr);
hubaddr = p;
widgetnum = SWIN_WIDGETNUM(hubaddr);
xtalkaddr = SWIN_WIDGETADDR(hubaddr);
/*
* differentiate local register vs IO space access
*/
IOERROR_SETVALUE(ioerror,widgetnum,widgetnum);
IOERROR_SETVALUE(ioerror,xtalkaddr,xtalkaddr);
} else if (NODE_BWIN_ADDR(nasid, (paddr_t)cp)){
/*
* Address corresponds to large window space.
* Convert it to xtalk address.
*/
int bigwin;
hub_piomap_t bw_piomap;
xtalk_piomap_t xt_pmap = NULL;
iopaddr_t hubaddr;
xwidgetnum_t widgetnum;
iopaddr_t xtalkaddr;
IOERROR_GETVALUE(p,ioerror,hubaddr);
hubaddr = p;
/*
* Have to loop to find the correct xtalk_piomap
* because the're not allocated on a one-to-one
* basis to the window number.
*/
for (bigwin=0; bigwin < HUB_NUM_BIG_WINDOW; bigwin++) {
bw_piomap = hubinfo_bwin_piomap_get(hinfo,
bigwin);
if (bw_piomap->hpio_bigwin_num ==
(BWIN_WINDOWNUM(hubaddr) - 1)) {
xt_pmap = hub_piomap_xt_piomap(bw_piomap);
break;
}
}
ASSERT(xt_pmap);
widgetnum = xtalk_pio_target_get(xt_pmap);
xtalkaddr = xtalk_pio_xtalk_addr_get(xt_pmap) + BWIN_WIDGETADDR(hubaddr);
IOERROR_SETVALUE(ioerror,widgetnum,widgetnum);
IOERROR_SETVALUE(ioerror,xtalkaddr,xtalkaddr);
/*
* Make sure that widgetnum doesnot map to hub
* register widget number, as we never use
* big window to access hub registers.
*/
ASSERT(widgetnum != HUB_REGISTER_WIDGET);
}
} else if (IOERROR_FIELDVALID(ioerror,hubaddr)) {
iopaddr_t hubaddr;
xwidgetnum_t widgetnum;
iopaddr_t xtalkaddr;
IOERROR_GETVALUE(p,ioerror,hubaddr);
hubaddr = p;
if (BWIN_WINDOWNUM(hubaddr)){
int window = BWIN_WINDOWNUM(hubaddr) - 1;
hubreg_t itte;
itte = (hubreg_t)HUB_L(IIO_ITTE_GET(nasid, window));
widgetnum = (itte >> IIO_ITTE_WIDGET_SHIFT) &
IIO_ITTE_WIDGET_MASK;
xtalkaddr = (((itte >> IIO_ITTE_OFFSET_SHIFT) &
IIO_ITTE_OFFSET_MASK) <<
BWIN_SIZE_BITS) +
BWIN_WIDGETADDR(hubaddr);
} else {
widgetnum = SWIN_WIDGETNUM(hubaddr);
xtalkaddr = SWIN_WIDGETADDR(hubaddr);
}
IOERROR_SETVALUE(ioerror,widgetnum,widgetnum);
IOERROR_SETVALUE(ioerror,xtalkaddr,xtalkaddr);
} else {
IOERR_PRINTF(printk(
"hub_ioerror_handler: Invalid address passed"));
return IOERROR_INVALIDADDR;
}
IOERROR_GETVALUE(p,ioerror,widgetnum);
if ((p) == HUB_REGISTER_WIDGET) {
/*
* Error in accessing Hub local register
* This should happen mostly in SABLE mode..
*/
retval = 0;
} else {
/* Make sure that the outbound widget access for this
* widget is enabled.
*/
if (!is_widget_pio_enabled(ioerror)) {
return(IOERROR_HANDLED);
}
retval = hub_xp_error_handler(
hub_v, nasid, error_code, mode, ioerror);
}
IOERR_PRINTF(printk(
"hub_ioerror_handler:PIO_READ_ERROR return: %d",
retval));
break;
case PIO_WRITE_ERROR:
/*
* This hub received an interrupt indicating a widget
* attached to this hub got a timeout.
* widgetnum field should be filled to indicate the
* widget that caused error.
*
* NOTE: This hub may have nothing to do with this error.
* We are here since the widget attached to the xbow
* gets its PIOs through this hub.
*
* There is nothing that can be done at this level.
* Just invoke the xtalk error handling mechanism.
*/
IOERROR_GETVALUE(p,ioerror,widgetnum);
if ((p) == HUB_REGISTER_WIDGET) {
} else {
/* Make sure that the outbound widget access for this
* widget is enabled.
*/
if (!is_widget_pio_enabled(ioerror)) {
return(IOERROR_HANDLED);
}
retval = hub_xp_error_handler(
hub_v, nasid, error_code, mode, ioerror);
}
break;
case DMA_READ_ERROR:
/*
* DMA Read error always ends up generating an interrupt
* at the widget level, and never at the hub level. So,
* we don't expect to come here any time
*/
ASSERT(0);
retval = IOERROR_UNHANDLED;
break;
case DMA_WRITE_ERROR:
/*
* DMA Write error is generated when a write by an I/O
* device could not be completed. Problem is, device is
* totally unaware of this problem, and would continue
* writing to system memory. So, hub has a way to send
* an error interrupt on the first error, and bitbucket
* all further write transactions.
* Coming here indicates that hub detected one such error,
* and we need to handle it.
*
* Hub interrupt handler would have extracted physaddr,
* widgetnum, and widgetdevice from the CRB
*
* There is nothing special to do here, since gathering
* data from crb's is done elsewhere. Just pass the
* error to xtalk layer.
*/
retval = hub_xp_error_handler(hub_v, nasid, error_code, mode,
ioerror);
break;
default:
ASSERT(0);
return IOERROR_BADERRORCODE;
}
/*
* If error was not handled, we may need to take certain action
* based on the error code.
* For e.g. in case of PIO_READ_ERROR, we may need to release the
* PIO Read entry table (they are sticky after errors).
* Similarly other cases.
*
* Further Action TBD
*/
end:
if (retval == IOERROR_HWGRAPH_LOOKUP) {
/*
* If we get errors very early, we can't traverse
* the path using hardware graph.
* To handle this situation, we need a functions
* which don't depend on the hardware graph vertex to
* handle errors. This break the modularity of the
* existing code. Instead we print out the reason for
* not handling error, and return. On return, all the
* info collected would be dumped. This should provide
* sufficient info to analyse the error.
*/
printk("Unable to handle IO error: hardware graph not setup\n");
}
return retval;
}
#define INFO_LBL_ERROR_STATE "error_state"
#define v_error_state_get(v,s) \
(hwgraph_info_get_LBL(v,INFO_LBL_ERROR_STATE, (arbitrary_info_t *)&s))
#define v_error_state_set(v,s,replace) \
(replace ? \
hwgraph_info_replace_LBL(v,INFO_LBL_ERROR_STATE,(arbitrary_info_t)s,0) :\
hwgraph_info_add_LBL(v,INFO_LBL_ERROR_STATE, (arbitrary_info_t)s))
#define v_error_state_clear(v) \
(hwgraph_info_remove_LBL(v,INFO_LBL_ERROR_STATE,0))
/*
* error_state_get
* Get the state of the vertex.
* Returns ERROR_STATE_INVALID on failure
* current state otherwise
*/
error_state_t
error_state_get(vertex_hdl_t v)
{
error_state_t s;
/* Check if we have a valid hwgraph vertex */
if ( v == (vertex_hdl_t)0 )
return(ERROR_STATE_NONE);
/* Get the labelled info hanging off the vertex which corresponds
* to the state.
*/
if (v_error_state_get(v, s) != GRAPH_SUCCESS) {
return(ERROR_STATE_NONE);
}
return(s);
}
/*
* error_state_set
* Set the state of the vertex
* Returns ERROR_RETURN_CODE_CANNOT_SET_STATE on failure
* ERROR_RETURN_CODE_SUCCESS otherwise
*/
error_return_code_t
error_state_set(vertex_hdl_t v,error_state_t new_state)
{
error_state_t old_state;
int replace = 1;
/* Check if we have a valid hwgraph vertex */
if ( v == (vertex_hdl_t)0 )
return(ERROR_RETURN_CODE_GENERAL_FAILURE);
/* This means that the error state needs to be cleaned */
if (new_state == ERROR_STATE_NONE) {
/* Make sure that we have an error state */
if (v_error_state_get(v,old_state) == GRAPH_SUCCESS)
v_error_state_clear(v);
return(ERROR_RETURN_CODE_SUCCESS);
}
/* Check if the state information has been set at least once
* for this vertex.
*/
if (v_error_state_get(v,old_state) != GRAPH_SUCCESS)
replace = 0;
if (v_error_state_set(v,new_state,replace) != GRAPH_SUCCESS) {
return(ERROR_RETURN_CODE_CANNOT_SET_STATE);
}
return(ERROR_RETURN_CODE_SUCCESS);
}
![[BACK]](/icons/back.gif){kind=icon}
Return to shubio.c CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [Development] / linux-2.6-xfs / arch / ia64 / sn / io / sn2