/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1992 - 1997, 2000-2003 Silicon Graphics, Inc. All rights reserved.
*/
#include <linux/vmalloc.h>
#include <linux/slab.h>
#include <asm/sn/sgi.h>
#include <asm/sn/iograph.h>
#include <asm/sn/pci/pci_bus_cvlink.h>
#include <asm/sn/sn_cpuid.h>
#include <asm/sn/simulator.h>
extern int bridge_rev_b_data_check_disable;
vertex_hdl_t busnum_to_pcibr_vhdl[MAX_PCI_XWIDGET];
nasid_t busnum_to_nid[MAX_PCI_XWIDGET];
void * busnum_to_atedmamaps[MAX_PCI_XWIDGET];
unsigned char num_bridges;
static int done_probing;
extern irqpda_t *irqpdaindr;
static int pci_bus_map_create(struct pcibr_list_s *softlistp, moduleid_t io_moduleid);
vertex_hdl_t devfn_to_vertex(unsigned char busnum, unsigned int devfn);
extern void register_pcibr_intr(int irq, pcibr_intr_t intr);
static void sn_dma_flush_init(unsigned long start,
unsigned long end,
int idx, int pin, int slot);
extern int cbrick_type_get_nasid(nasid_t);
extern void ioconfig_bus_new_entries(void);
extern void ioconfig_get_busnum(char *, int *);
extern int iomoduleid_get(nasid_t);
extern int pcibr_widget_to_bus(vertex_hdl_t);
extern int isIO9(int);
#define IS_OPUS(nasid) (cbrick_type_get_nasid(nasid) == MODULE_OPUSBRICK)
#define IS_ALTIX(nasid) (cbrick_type_get_nasid(nasid) == MODULE_CBRICK)
/*
* Init the provider asic for a given device
*/
static inline void __init
set_pci_provider(struct sn_device_sysdata *device_sysdata)
{
pciio_info_t pciio_info = pciio_info_get(device_sysdata->vhdl);
device_sysdata->pci_provider = pciio_info_pops_get(pciio_info);
}
/*
* pci_bus_cvlink_init() - To be called once during initialization before
* SGI IO Infrastructure init is called.
*/
int
pci_bus_cvlink_init(void)
{
extern int ioconfig_bus_init(void);
memset(busnum_to_pcibr_vhdl, 0x0, sizeof(vertex_hdl_t) * MAX_PCI_XWIDGET);
memset(busnum_to_nid, 0x0, sizeof(nasid_t) * MAX_PCI_XWIDGET);
memset(busnum_to_atedmamaps, 0x0, sizeof(void *) * MAX_PCI_XWIDGET);
num_bridges = 0;
return ioconfig_bus_init();
}
/*
* pci_bus_to_vertex() - Given a logical Linux Bus Number returns the associated
* pci bus vertex from the SGI IO Infrastructure.
*/
static inline vertex_hdl_t
pci_bus_to_vertex(unsigned char busnum)
{
vertex_hdl_t pci_bus = NULL;
/*
* First get the xwidget vertex.
*/
pci_bus = busnum_to_pcibr_vhdl[busnum];
return(pci_bus);
}
/*
* devfn_to_vertex() - returns the vertex of the device given the bus, slot,
* and function numbers.
*/
vertex_hdl_t
devfn_to_vertex(unsigned char busnum, unsigned int devfn)
{
int slot = 0;
int func = 0;
char name[16];
vertex_hdl_t pci_bus = NULL;
vertex_hdl_t device_vertex = (vertex_hdl_t)NULL;
/*
* Go get the pci bus vertex.
*/
pci_bus = pci_bus_to_vertex(busnum);
if (!pci_bus) {
/*
* During probing, the Linux pci code invents non-existent
* bus numbers and pci_dev structures and tries to access
* them to determine existence. Don't crib during probing.
*/
if (done_probing)
printk("devfn_to_vertex: Invalid bus number %d given.\n", busnum);
return(NULL);
}
/*
* Go get the slot&function vertex.
* Should call pciio_slot_func_to_name() when ready.
*/
slot = PCI_SLOT(devfn);
func = PCI_FUNC(devfn);
/*
* For a NON Multi-function card the name of the device looks like:
* ../pci/1, ../pci/2 ..
*/
if (func == 0) {
sprintf(name, "%d", slot);
if (hwgraph_traverse(pci_bus, name, &device_vertex) ==
GRAPH_SUCCESS) {
if (device_vertex) {
return(device_vertex);
}
}
}
/*
* This maybe a multifunction card. It's names look like:
* ../pci/1a, ../pci/1b, etc.
*/
sprintf(name, "%d%c", slot, 'a'+func);
if (hwgraph_traverse(pci_bus, name, &device_vertex) != GRAPH_SUCCESS) {
if (!device_vertex) {
return(NULL);
}
}
return(device_vertex);
}
struct sn_flush_nasid_entry flush_nasid_list[MAX_NASIDS];
/* Initialize the data structures for flushing write buffers after a PIO read.
* The theory is:
* Take an unused int. pin and associate it with a pin that is in use.
* After a PIO read, force an interrupt on the unused pin, forcing a write buffer flush
* on the in use pin. This will prevent the race condition between PIO read responses and
* DMA writes.
*/
static void
sn_dma_flush_init(unsigned long start, unsigned long end, int idx, int pin, int slot)
{
nasid_t nasid;
unsigned long dnasid;
int wid_num;
int bus;
struct sn_flush_device_list *p;
void *b;
int bwin;
int i;
nasid = NASID_GET(start);
wid_num = SWIN_WIDGETNUM(start);
bus = (start >> 23) & 0x1;
bwin = BWIN_WINDOWNUM(start);
if (flush_nasid_list[nasid].widget_p == NULL) {
flush_nasid_list[nasid].widget_p = (struct sn_flush_device_list **)kmalloc((HUB_WIDGET_ID_MAX+1) *
sizeof(struct sn_flush_device_list *), GFP_KERNEL);
if (!flush_nasid_list[nasid].widget_p) {
printk(KERN_WARNING "sn_dma_flush_init: Cannot allocate memory for nasid list\n");
return;
}
memset(flush_nasid_list[nasid].widget_p, 0, (HUB_WIDGET_ID_MAX+1) * sizeof(struct sn_flush_device_list *));
}
if (bwin > 0) {
int itte_index = bwin - 1;
unsigned long itte;
itte = HUB_L(IIO_ITTE_GET(nasid, itte_index));
flush_nasid_list[nasid].iio_itte[bwin] = itte;
wid_num = (itte >> IIO_ITTE_WIDGET_SHIFT) &
IIO_ITTE_WIDGET_MASK;
bus = itte & IIO_ITTE_OFFSET_MASK;
if (bus == 0x4 || bus == 0x8) {
bus = 0;
} else {
bus = 1;
}
}
/* if it's IO9, bus 1, we don't care about slots 1 and 4. This is
* because these are the IOC4 slots and we don't flush them.
*/
if (isIO9(nasid) && bus == 0 && (slot == 1 || slot == 4)) {
return;
}
if (flush_nasid_list[nasid].widget_p[wid_num] == NULL) {
flush_nasid_list[nasid].widget_p[wid_num] = (struct sn_flush_device_list *)kmalloc(
DEV_PER_WIDGET * sizeof (struct sn_flush_device_list), GFP_KERNEL);
if (!flush_nasid_list[nasid].widget_p[wid_num]) {
printk(KERN_WARNING "sn_dma_flush_init: Cannot allocate memory for nasid sub-list\n");
return;
}
memset(flush_nasid_list[nasid].widget_p[wid_num], 0,
DEV_PER_WIDGET * sizeof (struct sn_flush_device_list));
p = &flush_nasid_list[nasid].widget_p[wid_num][0];
for (i=0; i<DEV_PER_WIDGET;i++) {
p->bus = -1;
p->pin = -1;
p->slot = -1;
p++;
}
}
p = &flush_nasid_list[nasid].widget_p[wid_num][0];
for (i=0;i<DEV_PER_WIDGET; i++) {
if (p->pin == pin && p->bus == bus && p->slot == slot) break;
if (p->pin < 0) {
p->pin = pin;
p->bus = bus;
p->slot = slot;
break;
}
p++;
}
for (i=0; i<PCI_ROM_RESOURCE; i++) {
if (p->bar_list[i].start == 0) {
p->bar_list[i].start = start;
p->bar_list[i].end = end;
break;
}
}
b = (void *)(NODE_SWIN_BASE(nasid, wid_num) | (bus << 23) );
/* If it's IO9, then slot 2 maps to slot 7 and slot 6 maps to slot 8.
* To see this is non-trivial. By drawing pictures and reading manuals and talking
* to HW guys, we can see that on IO9 bus 1, slots 7 and 8 are always unused.
* Further, since we short-circuit slots 1, 3, and 4 above, we only have to worry
* about the case when there is a card in slot 2. A multifunction card will appear
* to be in slot 6 (from an interrupt point of view) also. That's the most we'll
* have to worry about. A four function card will overload the interrupt lines in
* slot 2 and 6.
* We also need to special case the 12160 device in slot 3. Fortunately, we have
* a spare intr. line for pin 4, so we'll use that for the 12160.
* All other buses have slot 3 and 4 and slots 7 and 8 unused. Since we can only
* see slots 1 and 2 and slots 5 and 6 coming through here for those buses (this
* is true only on Pxbricks with 2 physical slots per bus), we just need to add
* 2 to the slot number to find an unused slot.
* We have convinced ourselves that we will never see a case where two different cards
* in two different slots will ever share an interrupt line, so there is no need to
* special case this.
*/
if (isIO9(nasid) && ( (IS_ALTIX(nasid) && wid_num == 0xc)
|| (IS_OPUS(nasid) && wid_num == 0xf) )
&& bus == 0) {
if (pin == 1) {
p->force_int_addr = (unsigned long)pcireg_bridge_force_always_addr_get(b, 6);
pcireg_bridge_intr_device_bit_set(b, (1<<18));
dnasid = NASID_GET(virt_to_phys(&p->flush_addr));
pcireg_bridge_intr_addr_set(b, 6, ((virt_to_phys(&p->flush_addr) & 0xfffffffff) |
(dnasid << 36) | (0xfUL << 48)));
} else if (pin == 2) { /* 12160 SCSI device in IO9 */
p->force_int_addr = (unsigned long)pcireg_bridge_force_always_addr_get(b, 4);
pcireg_bridge_intr_device_bit_set(b, (2<<12));
dnasid = NASID_GET(virt_to_phys(&p->flush_addr));
pcireg_bridge_intr_addr_set(b, 4,
((virt_to_phys(&p->flush_addr) & 0xfffffffff) |
(dnasid << 36) | (0xfUL << 48)));
} else { /* slot == 6 */
p->force_int_addr = (unsigned long)pcireg_bridge_force_always_addr_get(b, 7);
pcireg_bridge_intr_device_bit_set(b, (5<<21));
dnasid = NASID_GET(virt_to_phys(&p->flush_addr));
pcireg_bridge_intr_addr_set(b, 7,
((virt_to_phys(&p->flush_addr) & 0xfffffffff) |
(dnasid << 36) | (0xfUL << 48)));
}
} else {
p->force_int_addr = (unsigned long)pcireg_bridge_force_always_addr_get(b, (pin +2));
pcireg_bridge_intr_device_bit_set(b, (pin << (pin * 3)));
dnasid = NASID_GET(virt_to_phys(&p->flush_addr));
pcireg_bridge_intr_addr_set(b, (pin + 2),
((virt_to_phys(&p->flush_addr) & 0xfffffffff) |
(dnasid << 36) | (0xfUL << 48)));
}
}
/*
* sn_pci_fixup() - This routine is called when platform_pci_fixup() is
* invoked at the end of pcibios_init() to link the Linux pci
* infrastructure to SGI IO Infrasturcture - ia64/kernel/pci.c
*
* Other platform specific fixup can also be done here.
*/
static void __init
sn_pci_fixup(int arg)
{
struct list_head *ln;
struct pci_bus *pci_bus = NULL;
struct pci_dev *device_dev = NULL;
struct sn_widget_sysdata *widget_sysdata;
struct sn_device_sysdata *device_sysdata;
pcibr_intr_t intr_handle;
pciio_provider_t *pci_provider;
vertex_hdl_t device_vertex;
pciio_intr_line_t lines = 0;
extern int numnodes;
int cnode;
if (arg == 0) {
#ifdef CONFIG_PROC_FS
extern void register_sn_procfs(void);
#endif
extern void sgi_master_io_infr_init(void);
extern void sn_init_cpei_timer(void);
sgi_master_io_infr_init();
for (cnode = 0; cnode < numnodes; cnode++) {
extern void intr_init_vecblk(cnodeid_t);
intr_init_vecblk(cnode);
}
sn_init_cpei_timer();
#ifdef CONFIG_PROC_FS
register_sn_procfs();
#endif
return;
}
done_probing = 1;
/*
* Initialize the pci bus vertex in the pci_bus struct.
*/
for( ln = pci_root_buses.next; ln != &pci_root_buses; ln = ln->next) {
pci_bus = pci_bus_b(ln);
widget_sysdata = kmalloc(sizeof(struct sn_widget_sysdata),
GFP_KERNEL);
if (!widget_sysdata) {
printk(KERN_WARNING "sn_pci_fixup(): Unable to "
"allocate memory for widget_sysdata\n");
return;
}
widget_sysdata->vhdl = pci_bus_to_vertex(pci_bus->number);
pci_bus->sysdata = (void *)widget_sysdata;
}
/*
* set the root start and end so that drivers calling check_region()
* won't see a conflict
*/
#ifdef CONFIG_IA64_SGI_SN_SIM
if (! IS_RUNNING_ON_SIMULATOR()) {
ioport_resource.start = 0xc000000000000000;
ioport_resource.end = 0xcfffffffffffffff;
}
#endif
/*
* Set the root start and end for Mem Resource.
*/
iomem_resource.start = 0;
iomem_resource.end = 0xffffffffffffffff;
/*
* Initialize the device vertex in the pci_dev struct.
*/
while ((device_dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, device_dev)) != NULL) {
unsigned int irq;
int idx;
u16 cmd;
vertex_hdl_t vhdl;
unsigned long size;
extern int bit_pos_to_irq(int);
/* Set the device vertex */
device_sysdata = kmalloc(sizeof(struct sn_device_sysdata),
GFP_KERNEL);
if (!device_sysdata) {
printk(KERN_WARNING "sn_pci_fixup: Cannot allocate memory for device sysdata\n");
return;
}
device_sysdata->vhdl = devfn_to_vertex(device_dev->bus->number, device_dev->devfn);
device_dev->sysdata = (void *) device_sysdata;
set_pci_provider(device_sysdata);
pci_read_config_word(device_dev, PCI_COMMAND, &cmd);
/*
* Set the resources address correctly. The assumption here
* is that the addresses in the resource structure has been
* read from the card and it was set in the card by our
* Infrastructure ..
*/
vhdl = device_sysdata->vhdl;
/* Allocate the IORESOURCE_IO space first */
for (idx = 0; idx < PCI_ROM_RESOURCE; idx++) {
unsigned long start, end, addr;
if (!(device_dev->resource[idx].flags & IORESOURCE_IO))
continue;
start = device_dev->resource[idx].start;
end = device_dev->resource[idx].end;
size = end - start;
if (!size)
continue;
addr = (unsigned long)pciio_pio_addr(vhdl, 0,
PCIIO_SPACE_WIN(idx), 0, size, 0, 0);
if (!addr) {
device_dev->resource[idx].start = 0;
device_dev->resource[idx].end = 0;
printk("sn_pci_fixup(): pio map failure for "
"%s bar%d\n", device_dev->slot_name, idx);
} else {
addr |= __IA64_UNCACHED_OFFSET;
device_dev->resource[idx].start = addr;
device_dev->resource[idx].end = addr + size;
}
if (device_dev->resource[idx].flags & IORESOURCE_IO)
cmd |= PCI_COMMAND_IO;
}
/* Allocate the IORESOURCE_MEM space next */
for (idx = 0; idx < PCI_ROM_RESOURCE; idx++) {
unsigned long start, end, addr;
if ((device_dev->resource[idx].flags & IORESOURCE_IO))
continue;
start = device_dev->resource[idx].start;
end = device_dev->resource[idx].end;
size = end - start;
if (!size)
continue;
addr = (unsigned long)pciio_pio_addr(vhdl, 0,
PCIIO_SPACE_WIN(idx), 0, size, 0, 0);
if (!addr) {
device_dev->resource[idx].start = 0;
device_dev->resource[idx].end = 0;
printk("sn_pci_fixup(): pio map failure for "
"%s bar%d\n", device_dev->slot_name, idx);
} else {
addr |= __IA64_UNCACHED_OFFSET;
device_dev->resource[idx].start = addr;
device_dev->resource[idx].end = addr + size;
}
if (device_dev->resource[idx].flags & IORESOURCE_MEM)
cmd |= PCI_COMMAND_MEMORY;
}
/*
* Update the Command Word on the Card.
*/
cmd |= PCI_COMMAND_MASTER; /* If the device doesn't support */
/* bit gets dropped .. no harm */
pci_write_config_word(device_dev, PCI_COMMAND, cmd);
pci_read_config_byte(device_dev, PCI_INTERRUPT_PIN,
(unsigned char *)&lines);
device_sysdata = (struct sn_device_sysdata *)device_dev->sysdata;
device_vertex = device_sysdata->vhdl;
pci_provider = device_sysdata->pci_provider;
if (!lines) {
continue;
}
irqpdaindr->curr = device_dev;
intr_handle = (pci_provider->intr_alloc)(device_vertex, NULL, lines, device_vertex);
if (intr_handle == NULL) {
printk("sn_pci_fixup: pcibr_intr_alloc() failed\n");
continue;
}
irq = intr_handle->bi_irq;
irqpdaindr->device_dev[irq] = device_dev;
(pci_provider->intr_connect)(intr_handle, (intr_func_t)0, (intr_arg_t)0);
device_dev->irq = irq;
register_pcibr_intr(irq, (pcibr_intr_t)intr_handle);
for (idx = 0; idx < PCI_ROM_RESOURCE; idx++) {
int ibits = intr_handle->bi_ibits;
int i;
size = device_dev->resource[idx].end -
device_dev->resource[idx].start;
if (size == 0)
continue;
for (i=0; i<8; i++) {
if (ibits & (1 << i) ) {
sn_dma_flush_init(device_dev->resource[idx].start,
device_dev->resource[idx].end,
idx,
i,
PCIBR_INFO_SLOT_GET_EXT(pcibr_info_get(device_sysdata->vhdl)));
}
}
}
}
}
/*
* linux_bus_cvlink() Creates a link between the Linux PCI Bus number
* to the actual hardware component that it represents:
* /dev/hw/linux/busnum/0 -> ../../../hw/module/001c01/slab/0/Ibrick/xtalk/15/pci
*
* The bus vertex, when called to devfs_generate_path() returns:
* hw/module/001c01/slab/0/Ibrick/xtalk/15/pci
* hw/module/001c01/slab/1/Pbrick/xtalk/12/pci-x/0
* hw/module/001c01/slab/1/Pbrick/xtalk/12/pci-x/1
*/
void
linux_bus_cvlink(void)
{
char name[8];
int index;
for (index=0; index < MAX_PCI_XWIDGET; index++) {
if (!busnum_to_pcibr_vhdl[index])
continue;
sprintf(name, "%x", index);
(void) hwgraph_edge_add(linux_busnum, busnum_to_pcibr_vhdl[index],
name);
}
}
/*
* pci_bus_map_create() - Called by pci_bus_to_hcl_cvlink() to finish the job.
*
* Linux PCI Bus numbers are assigned from lowest module_id numbers
* (rack/slot etc.)
*/
static int
pci_bus_map_create(struct pcibr_list_s *softlistp, moduleid_t moduleid)
{
int basebus_num, bus_number;
vertex_hdl_t pci_bus = softlistp->bl_vhdl;
char moduleid_str[16];
memset(moduleid_str, 0, 16);
format_module_id(moduleid_str, moduleid, MODULE_FORMAT_BRIEF);
(void) ioconfig_get_busnum((char *)moduleid_str, &basebus_num);
/*
* Assign the correct bus number and also the nasid of this
* pci Xwidget.
*/
bus_number = basebus_num + pcibr_widget_to_bus(pci_bus);
#ifdef DEBUG
{
char hwpath[MAXDEVNAME] = "\0";
extern int hwgraph_vertex_name_get(vertex_hdl_t, char *, uint);
pcibr_soft_t pcibr_soft = softlistp->bl_soft;
hwgraph_vertex_name_get(pci_bus, hwpath, MAXDEVNAME);
printk("%s:\n\tbus_num %d, basebus_num %d, brick_bus %d, "
"bus_vhdl 0x%lx, brick_type %d\n", hwpath, bus_number,
basebus_num, pcibr_widget_to_bus(pci_bus),
(uint64_t)pci_bus, pcibr_soft->bs_bricktype);
}
#endif
busnum_to_pcibr_vhdl[bus_number] = pci_bus;
/*
* Pre assign DMA maps needed for 32 Bits Page Map DMA.
*/
busnum_to_atedmamaps[bus_number] = (void *) vmalloc(
sizeof(struct pcibr_dmamap_s)*MAX_ATE_MAPS);
if (busnum_to_atedmamaps[bus_number] <= 0) {
printk("pci_bus_map_create: Cannot allocate memory for ate maps\n");
return -1;
}
memset(busnum_to_atedmamaps[bus_number], 0x0,
sizeof(struct pcibr_dmamap_s) * MAX_ATE_MAPS);
return(0);
}
/*
* pci_bus_to_hcl_cvlink() - This routine is called after SGI IO Infrastructure
* initialization has completed to set up the mappings between PCI BRIDGE
* ASIC and logical pci bus numbers.
*
* Must be called before pci_init() is invoked.
*/
int
pci_bus_to_hcl_cvlink(void)
{
int i;
extern pcibr_list_p pcibr_list;
for (i = 0; i < nummodules; i++) {
struct pcibr_list_s *softlistp = pcibr_list;
struct pcibr_list_s *first_in_list = NULL;
struct pcibr_list_s *last_in_list = NULL;
/* Walk the list of pcibr_soft structs looking for matches */
while (softlistp) {
struct pcibr_soft_s *pcibr_soft = softlistp->bl_soft;
moduleid_t moduleid;
/* Is this PCI bus associated with this moduleid? */
moduleid = NODE_MODULEID(
NASID_TO_COMPACT_NODEID(pcibr_soft->bs_nasid));
if (modules[i]->id == moduleid) {
struct pcibr_list_s *new_element;
new_element = kmalloc(sizeof (struct pcibr_soft_s), GFP_KERNEL);
if (new_element == NULL) {
printk("%s: Couldn't allocate memory\n",__FUNCTION__);
return -ENOMEM;
}
new_element->bl_soft = softlistp->bl_soft;
new_element->bl_vhdl = softlistp->bl_vhdl;
new_element->bl_next = NULL;
/* list empty so just put it on the list */
if (first_in_list == NULL) {
first_in_list = new_element;
last_in_list = new_element;
softlistp = softlistp->bl_next;
continue;
}
/*
* BASEIO IObricks attached to a module have
* a higher priority than non BASEIO IOBricks
* when it comes to persistant pci bus
* numbering, so put them on the front of the
* list.
*/
if (isIO9(pcibr_soft->bs_nasid)) {
new_element->bl_next = first_in_list;
first_in_list = new_element;
} else {
last_in_list->bl_next = new_element;
last_in_list = new_element;
}
}
softlistp = softlistp->bl_next;
}
/*
* We now have a list of all the pci bridges associated with
* the module_id, modules[i]. Call pci_bus_map_create() for
* each pci bridge
*/
softlistp = first_in_list;
while (softlistp) {
moduleid_t iobrick;
struct pcibr_list_s *next = softlistp->bl_next;
iobrick = iomoduleid_get(softlistp->bl_soft->bs_nasid);
pci_bus_map_create(softlistp, iobrick);
kfree(softlistp);
softlistp = next;
}
}
/*
* Create the Linux PCI bus number vertex link.
*/
(void)linux_bus_cvlink();
(void)ioconfig_bus_new_entries();
return(0);
}
/*
* Ugly hack to get PCI setup until we have a proper ACPI namespace.
*/
extern struct pci_ops sn_pci_ops;
int __init
sn_pci_init (void)
{
# define PCI_BUSES_TO_SCAN 256
int i = 0;
struct pci_controller *controller;
if (!ia64_platform_is("sn2") || IS_RUNNING_ON_SIMULATOR())
return 0;
/*
* This is needed to avoid bounce limit checks in the blk layer
*/
ia64_max_iommu_merge_mask = ~PAGE_MASK;
/*
* set pci_raw_ops, etc.
*/
sn_pci_fixup(0);
controller = kmalloc(sizeof(struct pci_controller), GFP_KERNEL);
if (controller) {
memset(controller, 0, sizeof(struct pci_controller));
/* just allocate some devices and fill in the pci_dev structs */
for (i = 0; i < PCI_BUSES_TO_SCAN; i++)
pci_scan_bus(i, &sn_pci_ops, controller);
}
/*
* actually find devices and fill in hwgraph structs
*/
sn_pci_fixup(1);
return 0;
}
subsys_initcall(sn_pci_init);
![[BACK]](/icons/back.gif){kind=icon}
Return to pci_bus_cvlink.c CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [Development] / linux-2.6-xfs / arch / ia64 / sn / io / machvec