Return to Kconfig CVS log

Up to [Development] / linux-2.6-xfs / arch / arm26

Merge up to 2.6.5

#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
#

mainmenu "Linux Kernel Configuration"

config ARM
	bool
	default y

config ARM26
	bool
	default y

config MMU
	bool
	default y

config ARCH_ACORN
        bool
        default y

config CPU_26
        bool
        default y

config FIQ
        bool
        default y

# 9 = 512 pages 8 = 256 pages 7 = 128 pages
config FORCE_MAX_ZONEORDER
        int
        default 9

config UID16
	bool
	default y

config RWSEM_GENERIC_SPINLOCK
	bool
	default y

config RWSEM_XCHGADD_ALGORITHM
	bool

config GENERIC_BUST_SPINLOCK
	bool

config GENERIC_ISA_DMA
	bool

source "init/Kconfig"


menu "System Type"

comment "Archimedes/A5000 Implementations (select only ONE)"

config ARCH_ARC
        bool "Archimedes"
        help
          Say Y to support the Acorn Archimedes.
	  
	  The Acorn Archimedes was an personal computer based on an 8MHz ARM2
          processor, released in 1987.  It supported up to 16MB of RAM in
	  later models and floppy, harddisc, ethernet etc.

config ARCH_A5K
        bool "A5000"
        help
          Say Y here to to support the Acorn A5000.
	  
	  Linux can support the
          internal IDE disk and CD-ROM interface, serial and parallel port,
          and the floppy drive.  Note that on some A5000s the floppy is
          plugged into the wrong socket on the motherboard.

config PAGESIZE_16
        bool "2MB physical memory (broken)"
        help
          Say Y here if your Archimedes or A5000 system has only 2MB of
          memory, otherwise say N.  The resulting kernel will not run on a
          machine with 4MB of memory.
endmenu

menu "General setup"

# Compressed boot loader in ROM.  Yes, we really want to ask about
# TEXT and BSS so we preserve their values in the config files.
config ZBOOT_ROM
	bool "Compressed boot loader in ROM/flash"
	help
	  Say Y here if you intend to execute your compressed kernel image (zImage)
	  directly from ROM or flash.  If unsure, say N.

config ZBOOT_ROM_TEXT
	depends on ZBOOT_ROM
	hex "Compressed ROM boot loader base address"
	default "0"
	help
	  The base address for zImage.  Unless you have special requirements, you
	  should not change this value.

config ZBOOT_ROM_BSS
	depends on ZBOOT_ROM
	hex "Compressed ROM boot loader BSS address"
	default "0"
	help
	  The base address of 64KiB of read/write memory, which must be available
	  while the decompressor is running.  Unless you have special requirements,
	  you should not change this value.

config XIP_KERNEL
	bool "Execute In Place (XIP) kernel image"
	help
	  Select this option to create a kernel that can be programed into
	  the OS ROMs.

comment "At least one math emulation must be selected"

config FPE_NWFPE
	tristate "NWFPE math emulation"
	---help---
	  Say Y to include the NWFPE floating point emulator in the kernel.
	  This is necessary to run most binaries. Linux does not currently
	  support floating point hardware so you need to say Y here even if
	  your machine has an FPA or floating point co-processor podule.

	  It is also possible to say M to build the emulator as a module
	  (nwfpe) or indeed to leave it out altogether. However, unless you
	  know what you are doing this can easily render your machine
	  unbootable. Saying Y is the safe option.

	  You may say N here if you are going to load the Acorn FPEmulator
	  early in the bootup.

source "fs/Kconfig.binfmt"

config PREEMPT
	bool "Preemptible Kernel (EXPERIMENTAL)"
	depends on CPU_32 && EXPERIMENTAL
	help
	  This option reduces the latency of the kernel when reacting to
	  real-time or interactive events by allowing a low priority process to
	  be preempted even if it is in kernel mode executing a system call.
	  This allows applications to run more reliably even when the system is
	  under load.

	  Say Y here if you are building a kernel for a desktop, embedded
	  or real-time system.  Say N if you are unsure.

config ARTHUR
	tristate "RISC OS personality"
	depends on CPU_32
	help
	  Say Y here to include the kernel code necessary if you want to run
	  Acorn RISC OS/Arthur binaries under Linux. This code is still very
	  experimental; if this sounds frightening, say N and sleep in peace.
	  You can also say M here to compile this support as a module (which
	  will be called arthur).

config CMDLINE
	string "Default kernel command string"
	default ""
	help
	  On some architectures (EBSA110 and CATS), there is currently no way
	  for the boot loader to pass arguments to the kernel. For these
	  architectures, you should supply some command-line options at build
	  time by entering them here. As a minimum, you should specify the
	  memory size and the root device (e.g., mem=64M root=/dev/nfs).

endmenu

source "drivers/base/Kconfig"

source "drivers/parport/Kconfig"

source "drivers/pnp/Kconfig"

source "drivers/block/Kconfig"

source "drivers/md/Kconfig"

source "net/Kconfig"

source "drivers/ide/Kconfig"

source "drivers/scsi/Kconfig"

source "drivers/isdn/Kconfig"

#
# input before char - char/joystick depends on it. As does USB.
#
source "drivers/input/Kconfig"

source "drivers/char/Kconfig"

source "drivers/media/Kconfig"

source "fs/Kconfig"

source "drivers/video/Kconfig"

if ARCH_ACORN

source "sound/Kconfig"

endif

source "drivers/misc/Kconfig"

source "drivers/usb/Kconfig"

menu "Kernel hacking"

# RMK wants arm kernels compiled with frame pointers so hardwire this to y.
# If you know what you are doing and are willing to live without stack
# traces, you can get a slightly smaller kernel by setting this option to
# n, but then RMK will have to kill you ;).
config FRAME_POINTER
	bool
	default y
	help
	  If you say N here, the resulting kernel will be slightly smaller and
	  faster. However, when a problem occurs with the kernel, the
	  information that is reported is severely limited. Most people
	  should say Y here.

config DEBUG_USER
	bool "Verbose user fault messages"
	help
	  When a user program crashes due to an exception, the kernel can
	  print a brief message explaining what the problem was. This is
	  sometimes helpful for debugging but serves no purpose on a
	  production system. Most people should say N here.

config DEBUG_INFO
	bool "Include GDB debugging information in kernel binary"
	help
	  Say Y here to include source-level debugging information in the
	  `vmlinux' binary image. This is handy if you want to use gdb or
	  addr2line to debug the kernel. It has no impact on the in-memory
	  footprint of the running kernel but it can increase the amount of
	  time and disk space needed for compilation of the kernel. If in
	  doubt say N.

config DEBUG_KERNEL
	bool "Kernel debugging"
	help
	  Say Y here if you are developing drivers or trying to debug and
	  identify kernel problems.

config DEBUG_SLAB
	bool "Debug memory allocations"
	depends on DEBUG_KERNEL
	help
	  Say Y here to have the kernel do limited verification on memory
	  allocation as well as poisoning memory on free to catch use of freed
	  memory.

config MAGIC_SYSRQ
	bool "Magic SysRq key"
	depends on DEBUG_KERNEL
	help
	  If you say Y here, you will have some control over the system even
	  if the system crashes for example during kernel debugging (e.g., you
	  will be able to flush the buffer cache to disk, reboot the system
	  immediately or dump some status information). This is accomplished
	  by pressing various keys while holding SysRq (Alt+PrintScreen). It
	  also works on a serial console (on PC hardware at least), if you
	  send a BREAK and then within 5 seconds a command keypress. The
	  keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
	  unless you really know what this hack does.

config DEBUG_SPINLOCK
	bool "Spinlock debugging"
	depends on DEBUG_KERNEL
	help
	  Say Y here and build SMP to catch missing spinlock initialization
	  and certain other kinds of spinlock errors commonly made.  This is
	  best used in conjunction with the NMI watchdog so that spinlock
	  deadlocks are also debuggable.

config DEBUG_WAITQ
	bool "Wait queue debugging"
	depends on DEBUG_KERNEL

config DEBUG_BUGVERBOSE
	bool "Verbose BUG() reporting (adds 70K)"
	depends on DEBUG_KERNEL
	help
	  Say Y here to make BUG() panics output the file name and line number
	  of the BUG call as well as the EIP and oops trace.  This aids
	  debugging but costs about 70-100K of memory.

config DEBUG_ERRORS
	bool "Verbose kernel error messages"
	depends on DEBUG_KERNEL
	help
	  This option controls verbose debugging information which can be
	  printed when the kernel detects an internal error. This debugging
	  information is useful to kernel hackers when tracking down problems,
	  but mostly meaningless to other people. It's safe to say Y unless
	  you are concerned with the code size or don't want to see these
	  messages.

config DEBUG_INFO
	bool "Compile the kernel with debug info"
	depends on DEBUG_KERNEL
	help
          If you say Y here the resulting kernel image will include
	  debugging info resulting in a larger kernel image.
	  Say Y here only if you plan to use gdb to debug the kernel.
	  If you don't debug the kernel, you can say N.

# These options are only for real kernel hackers who want to get their hands dirty. 
config DEBUG_LL
	bool "Kernel low-level debugging functions"
	depends on DEBUG_KERNEL
	help
	  Say Y here to include definitions of printascii, printchar, printhex
	  in the kernel.  This is helpful if you are debugging code that
	  executes before the console is initialized.

endmenu

source "security/Kconfig"

source "crypto/Kconfig"

source "lib/Kconfig"