/*
* linux/arch/arm/mach-sa1100/system3.c
*
* Copyright (C) 2001 Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
*
* $Id: system3.c,v 1.1.6.1 2001/12/04 17:28:06 seletz Exp $
*
* This file contains all PT Sytsem 3 tweaks. Based on original work from
* Nicolas Pitre's assabet fixes
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* $Log: system3.c,v $
* Revision 1.1.6.1 2001/12/04 17:28:06 seletz
* - merged from previous branch
*
* Revision 1.1.4.3 2001/12/04 15:16:31 seletz
* - merged from linux_2_4_13_ac5_rmk2
*
* Revision 1.1.4.2 2001/11/19 17:18:57 seletz
* - more code cleanups
*
* Revision 1.1.4.1 2001/11/16 13:52:05 seletz
* - PT Digital Board Support Code
*
* Revision 1.1.2.2 2001/11/05 16:46:18 seletz
* - cleanups
*
* Revision 1.1.2.1 2001/10/15 16:00:43 seletz
* - first revision working with new board
*
*
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/cpufreq.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/serial_sa1100.h>
#include <linux/serial_core.h>
#include "generic.h"
#include <asm/hardware/sa1111.h>
#define DEBUG 1
#ifdef DEBUG
# define DPRINTK( x, args... ) printk( "%s: line %d: "x, __FUNCTION__, __LINE__, ## args );
#else
# define DPRINTK( x, args... ) /* nix */
#endif
/**********************************************************************
* prototypes
*/
/* init funcs */
static int __init system3_init(void);
static void __init system3_init_irq(void);
static void __init system3_map_io(void);
static u_int system3_get_mctrl(struct uart_port *port);
static void system3_set_mctrl(struct uart_port *port, u_int mctrl);
static void system3_uart_pm(struct uart_port *port, u_int state, u_int oldstate);
static int sdram_notifier(struct notifier_block *nb, unsigned long event, void *data);
static void system3_lcd_power(int on);
static void system3_backlight_power(int on);
/**********************************************************************
* global data
*/
/**********************************************************************
* static data
*/
static struct map_desc system3_io_desc[] __initdata = {
/* virtual physical length type */
{ 0xf3000000, PT_CPLD_BASE, 0x00100000, MT_DEVICE }, /* System Registers */
{ 0xf4000000, PT_SA1111_BASE, 0x00100000, MT_DEVICE } /* SA-1111 */
};
static struct sa1100_port_fns system3_port_fns __initdata = {
.set_mctrl = system3_set_mctrl,
.get_mctrl = system3_get_mctrl,
.pm = system3_uart_pm,
};
static struct notifier_block system3_clkchg_block = {
.notifier_call = sdram_notifier,
};
/**********************************************************************
* Static functions
*/
static void __init system3_map_io(void)
{
DPRINTK( "%s\n", "START" );
sa1100_map_io();
iotable_init(system3_io_desc, ARRAY_SIZE(system3_io_desc));
sa1100_register_uart_fns(&system3_port_fns);
sa1100_register_uart(0, 1); /* com port */
sa1100_register_uart(1, 2);
sa1100_register_uart(2, 3); /* radio module */
Ser1SDCR0 |= SDCR0_SUS;
}
/*********************************************************************
* Install IRQ handler
*/
static void
system3_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
{
u_char irr;
//DPRINTK( "irq=%d, desc=%p, regs=%p\n", irq, desc, regs );
while (1) {
struct irqdesc *d;
/*
* Acknowledge the parent IRQ.
*/
desc->chip->ack(irq);
/*
* Read the interrupt reason register. Let's have all
* active IRQ bits high. Note: there is a typo in the
* Neponset user's guide for the SA1111 IRR level.
*/
//irr = PT_IRQSR & (PT_IRR_LAN | PT_IRR_SA1111);
irr = PT_IRQSR & (PT_IRR_SA1111);
/* SMC IRQ is low-active, so "switch" bit over */
//irr ^= (PT_IRR_LAN);
//DPRINTK( "irr=0x%02x\n", irr );
if ((irr & (PT_IRR_LAN | PT_IRR_SA1111)) == 0)
break;
/*
* Since there is no individual mask, we have to
* mask the parent IRQ. This is safe, since we'll
* recheck the register for any pending IRQs.
*/
if (irr & (PT_IRR_LAN)) {
desc->chip->mask(irq);
if (irr & PT_IRR_LAN) {
//DPRINTK( "SMC9196, irq=%d\n", IRQ_SYSTEM3_SMC9196 );
d = irq_desc + IRQ_SYSTEM3_SMC9196;
d->handle(IRQ_SYSTEM3_SMC9196, d, regs);
}
#if 0 /* no SSP yet on system 4 */
if (irr & IRR_USAR) {
d = irq_desc + IRQ_NEPONSET_USAR;
d->handle(IRQ_NEPONSET_USAR, d, regs);
}
#endif
desc->chip->unmask(irq);
}
if (irr & PT_IRR_SA1111) {
//DPRINTK( "SA1111, irq=%d\n", IRQ_SYSTEM3_SA1111 );
d = irq_desc + IRQ_SYSTEM3_SA1111;
d->handle(IRQ_SYSTEM3_SA1111, d, regs);
}
}
}
static void __init system3_init_irq(void)
{
/*
* Install handler for GPIO25.
*/
set_irq_type(IRQ_GPIO25, IRQT_RISING);
set_irq_chained_handler(IRQ_GPIO25, system3_irq_handler);
/*
* install eth irq
*/
set_irq_handler(IRQ_SYSTEM3_SMC9196, do_simple_IRQ);
set_irq_flags(IRQ_SYSTEM3_SMC9196, IRQF_VALID | IRQF_PROBE);
}
/**********************************************************************
* On system 3 limit cpu frequency to 206 Mhz
*/
static int sdram_notifier(struct notifier_block *nb, unsigned long event,
void *data)
{
struct cpufreq_policy *policy = data;
switch (event) {
case CPUFREQ_ADJUST:
case CPUFREQ_INCOMPATIBLE:
cpufreq_verify_within_limits(policy, 147500, 206000);
break;
case CPUFREQ_NOTIFY:
if ((policy->min < 147500) ||
(policy->max > 206000))
panic("cpufreq failed to limit the speed\n");
break;
}
return 0;
}
/**
* system3_uart_pm - powermgmt callback function for system 3 UART
* @port: uart port structure
* @state: pm state
* @oldstate: old pm state
*
*/
static void system3_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
{
/* TODO: switch on/off uart in powersave mode */
}
/*
* Note! this can be called from IRQ context.
* FIXME: Handle PT Digital Board CTRL regs irq-safe.
*
* NB: system3 uses COM_RTS and COM_DTR for both UART1 (com port)
* and UART3 (radio module). We only handle them for UART1 here.
*/
static void system3_set_mctrl(struct uart_port *port, u_int mctrl)
{
if (port->mapbase == _Ser1UTCR0) {
u_int set = 0, clear = 0;
if (mctrl & TIOCM_RTS)
set |= PT_CTRL2_RS1_RTS;
else
clear |= PT_CTRL2_RS1_RTS;
if (mctrl & TIOCM_DTR)
set |= PT_CTRL2_RS1_DTR;
else
clear |= PT_CTRL2_RS1_DTR;
PTCTRL2_clear(clear);
PTCTRL2_set(set);
}
}
static u_int system3_get_mctrl(struct uart_port *port)
{
u_int ret = 0;
u_int irqsr = PT_IRQSR;
/* need 2 reads to read current value */
irqsr = PT_IRQSR;
/* TODO: check IRQ source register for modem/com
status lines and set them correctly. */
ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
return ret;
}
/**
* system3_lcd_backlight_on - switch system 3 lcd backlight on
*
*/
int system3_lcd_backlight_on( void )
{
PTCTRL0_set( PT_CTRL0_LCD_BL );
return 0;
}
/**
* system3_lcd_backlight_off - switch system 3 lcd backlight off
*
*/
static void system3_lcd_backlight_off(void)
{
PTCTRL0_clear( PT_CTRL0_LCD_BL );
}
/**
* system3_lcd_on - switch system 3 lcd on
*
*/
static void system3_lcd_on(void)
{
DPRINTK( "%s\n", "START" );
PTCTRL0_set( PT_CTRL0_LCD_EN );
/* brightness / contrast */
sa1111_enable_device(SKPCR_PWMCLKEN);
PB_DDR = 0xFFFFFFFF;
SKPEN0 = 1;
SKPEN1 = 1;
}
/**
* system3_lcd_off - switch system 3 lcd off
*
*/
static void system3_lcd_off(void)
{
DPRINTK( "%s\n", "START" );
PTCTRL0_clear( PT_CTRL0_LCD_EN );
SKPEN0 = 0;
SKPEN1 = 0;
sa1111_disable_device(SKPCR_PWMCLKEN);
}
/**
* system3_lcd_contrast - set system 3 contrast
* @value: the new contrast
*
*/
static void system3_lcd_contrast(unsigned char value)
{
DPRINTK( "value=0x%02x\n", value );
SYS3LCDCONTR = value;
}
/**
* system3_lcd_brightness - set system 3 brightness
* @value: the new brightness
*
*/
static void system3_lcd_brightness(unsigned char value)
{
DPRINTK( "value=0x%02x\n", value );
SYS3LCDBRIGHT = value;
}
static void system3_lcd_power(int on)
{
if (on) {
system3_lcd_on();
} else {
system3_lcd_off();
}
}
static void system3_backlight_power(int on)
{
if (on) {
system3_lcd_backlight_on();
system3_lcd_contrast(0x95);
system3_lcd_brightness(240);
} else {
system3_lcd_backlight_off();
}
}
static struct resource sa1111_resources[] = {
[0] = {
.start = PT_SA1111_BASE,
.end = PT_SA1111_BASE + 0x00001fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_SYSTEM3_SA1111,
.end = IRQ_SYSTEM3_SA1111,
.flags = IORESOURCE_IRQ,
},
};
static u64 sa1111_dmamask = 0xffffffffUL;
static struct platform_device sa1111_device = {
.name = "sa1111",
.id = 0,
.dev = {
.dma_mask = &sa1111_dmamask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(sa1111_resources),
.resource = sa1111_resources,
};
static struct platform_device *devices[] __initdata = {
&sa1111_device,
};
static int __init system3_init(void)
{
int ret = 0;
DPRINTK( "%s\n", "START" );
if ( !machine_is_pt_system3() ) {
ret = -EINVAL;
goto DONE;
}
sa1100fb_lcd_power = system3_lcd_power;
sa1100fb_backlight_power = system3_backlight_power;
/* init control register */
PT_CTRL0 = PT_CTRL0_INIT;
PT_CTRL1 = 0x02;
PT_CTRL2 = 0x00;
DPRINTK( "CTRL[0]=0x%02x\n", PT_CTRL0 );
DPRINTK( "CTRL[1]=0x%02x\n", PT_CTRL1 );
DPRINTK( "CTRL[2]=0x%02x\n", PT_CTRL2 );
/*
* Ensure that the memory bus request/grant signals are setup,
* and the grant is held in its inactive state.
*/
sa1110_mb_disable();
system3_init_irq();
/*
* Probe for a SA1111.
*/
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if (ret < 0) {
printk( KERN_WARNING"PT Digital Board: no SA1111 found!\n" );
goto DONE;
}
#ifdef CONFIG_CPU_FREQ
ret = cpufreq_register_notifier(&system3_clkchg_block);
if ( ret != 0 ) {
printk( KERN_WARNING"PT Digital Board: could not register clock scale callback\n" );
goto DONE;
}
#endif
ret = 0;
DONE:
DPRINTK( "ret=%d\n", ret );
return ret;
}
/**********************************************************************
* Exported Functions
*/
/**********************************************************************
* kernel magic macros
*/
arch_initcall(system3_init);
MACHINE_START(PT_SYSTEM3, "PT System 3")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
BOOT_PARAMS(0xc0000100)
MAPIO(system3_map_io)
INITIRQ(sa1100_init_irq)
INITTIME(sa1100_init_time)
MACHINE_END
![[BACK]](/icons/back.gif){kind=icon}
Return to system3.c CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [Development] / linux-2.6-xfs / arch / arm / mach-sa1100