/*
* linux/arch/arm/kernel/entry-armv.S
*
* Copyright (C) 1996,1997,1998 Russell King.
* ARM700 fix by Matthew Godbolt (linux-user@willothewisp.demon.co.uk)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Low-level vector interface routines
*
* Note: there is a StrongARM bug in the STMIA rn, {regs}^ instruction that causes
* it to save wrong values... Be aware!
*/
#include <linux/config.h>
#include <linux/init.h>
#include <asm/thread_info.h>
#include <asm/glue.h>
#include <asm/ptrace.h>
#include <asm/vfpmacros.h>
#include "entry-header.S"
#ifdef IOC_BASE
/* IOC / IOMD based hardware */
#include <asm/hardware/iomd.h>
.equ ioc_base_high, IOC_BASE & 0xff000000
.equ ioc_base_low, IOC_BASE & 0x00ff0000
.macro disable_fiq
mov r12, #ioc_base_high
.if ioc_base_low
orr r12, r12, #ioc_base_low
.endif
strb r12, [r12, #0x38] @ Disable FIQ register
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov r4, #ioc_base_high @ point at IOC
.if ioc_base_low
orr r4, r4, #ioc_base_low
.endif
ldrb \irqstat, [r4, #IOMD_IRQREQB] @ get high priority first
ldr \base, =irq_prio_h
teq \irqstat, #0
#ifdef IOMD_BASE
ldreqb \irqstat, [r4, #IOMD_DMAREQ] @ get dma
addeq \base, \base, #256 @ irq_prio_h table size
teqeq \irqstat, #0
bne 2406f
#endif
ldreqb \irqstat, [r4, #IOMD_IRQREQA] @ get low priority
addeq \base, \base, #256 @ irq_prio_d table size
teqeq \irqstat, #0
#ifdef IOMD_IRQREQC
ldreqb \irqstat, [r4, #IOMD_IRQREQC]
addeq \base, \base, #256 @ irq_prio_l table size
teqeq \irqstat, #0
#endif
#ifdef IOMD_IRQREQD
ldreqb \irqstat, [r4, #IOMD_IRQREQD]
addeq \base, \base, #256 @ irq_prio_lc table size
teqeq \irqstat, #0
#endif
2406: ldrneb \irqnr, [\base, \irqstat] @ get IRQ number
.endm
/*
* Interrupt table (incorporates priority). Please note that we
* rely on the order of these tables (see above code).
*/
.macro irq_prio_table
irq_prio_h: .byte 0, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10
.byte 12, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10
.byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
.byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
.byte 14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10
.byte 14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10
.byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
.byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
.byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
.byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
.byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
.byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
.byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
.byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
.byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
.byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
#ifdef IOMD_BASE
irq_prio_d: .byte 0,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
.byte 20,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
.byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
.byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
.byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
.byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
.byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
.byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
.byte 23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
.byte 23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
.byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
.byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
.byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
.byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
.byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
.byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
#endif
irq_prio_l: .byte 0, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3
.byte 4, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3
.byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
.byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
.byte 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3
.byte 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3
.byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
.byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
.byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
.byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
.byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
.byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
.byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
.byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
.byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
.byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
#ifdef IOMD_IRQREQC
irq_prio_lc: .byte 24,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27
.byte 28,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27
.byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
.byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
.byte 30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27
.byte 30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27
.byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
.byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
.byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
.byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
.byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
.byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
.byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
.byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
.byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
.byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
#endif
#ifdef IOMD_IRQREQD
irq_prio_ld: .byte 40,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43
.byte 44,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43
.byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
.byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
.byte 46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43
.byte 46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43
.byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
.byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
.byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
.byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
.byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
.byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
.byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
.byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
.byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
.byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
#endif
.endm
#elif defined(CONFIG_ARCH_EBSA110)
#define IRQ_STAT 0xff000000 /* read */
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, stat, base, tmp
mov \base, #IRQ_STAT
ldrb \stat, [\base] @ get interrupts
mov \irqnr, #0
tst \stat, #15
addeq \irqnr, \irqnr, #4
moveq \stat, \stat, lsr #4
tst \stat, #3
addeq \irqnr, \irqnr, #2
moveq \stat, \stat, lsr #2
tst \stat, #1
addeq \irqnr, \irqnr, #1
moveq \stat, \stat, lsr #1
tst \stat, #1 @ bit 0 should be set
.endm
.macro irq_prio_table
.endm
#elif defined(CONFIG_ARCH_SHARK)
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov r4, #0xe0000000
mov \irqstat, #0x0C
strb \irqstat, [r4, #0x20] @outb(0x0C, 0x20) /* Poll command */
ldrb \irqnr, [r4, #0x20] @irq = inb(0x20) & 7
and \irqstat, \irqnr, #0x80
teq \irqstat, #0
beq 43f
and \irqnr, \irqnr, #7
teq \irqnr, #2
bne 44f
43: mov \irqstat, #0x0C
strb \irqstat, [r4, #0xa0] @outb(0x0C, 0xA0) /* Poll command */
ldrb \irqnr, [r4, #0xa0] @irq = (inb(0xA0) & 7) + 8
and \irqstat, \irqnr, #0x80
teq \irqstat, #0
beq 44f
and \irqnr, \irqnr, #7
add \irqnr, \irqnr, #8
44: teq \irqstat, #0
.endm
.macro irq_prio_table
.endm
#elif defined(CONFIG_FOOTBRIDGE)
#include <asm/hardware/dec21285.h>
.macro disable_fiq
.endm
.equ dc21285_high, ARMCSR_BASE & 0xff000000
.equ dc21285_low, ARMCSR_BASE & 0x00ffffff
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov r4, #dc21285_high
.if dc21285_low
orr r4, r4, #dc21285_low
.endif
ldr \irqstat, [r4, #0x180] @ get interrupts
mov \irqnr, #IRQ_SDRAMPARITY
tst \irqstat, #IRQ_MASK_SDRAMPARITY
bne 1001f
tst \irqstat, #IRQ_MASK_UART_RX
movne \irqnr, #IRQ_CONRX
bne 1001f
tst \irqstat, #IRQ_MASK_DMA1
movne \irqnr, #IRQ_DMA1
bne 1001f
tst \irqstat, #IRQ_MASK_DMA2
movne \irqnr, #IRQ_DMA2
bne 1001f
tst \irqstat, #IRQ_MASK_IN0
movne \irqnr, #IRQ_IN0
bne 1001f
tst \irqstat, #IRQ_MASK_IN1
movne \irqnr, #IRQ_IN1
bne 1001f
tst \irqstat, #IRQ_MASK_IN2
movne \irqnr, #IRQ_IN2
bne 1001f
tst \irqstat, #IRQ_MASK_IN3
movne \irqnr, #IRQ_IN3
bne 1001f
tst \irqstat, #IRQ_MASK_PCI
movne \irqnr, #IRQ_PCI
bne 1001f
tst \irqstat, #IRQ_MASK_DOORBELLHOST
movne \irqnr, #IRQ_DOORBELLHOST
bne 1001f
tst \irqstat, #IRQ_MASK_I2OINPOST
movne \irqnr, #IRQ_I2OINPOST
bne 1001f
tst \irqstat, #IRQ_MASK_TIMER1
movne \irqnr, #IRQ_TIMER1
bne 1001f
tst \irqstat, #IRQ_MASK_TIMER2
movne \irqnr, #IRQ_TIMER2
bne 1001f
tst \irqstat, #IRQ_MASK_TIMER3
movne \irqnr, #IRQ_TIMER3
bne 1001f
tst \irqstat, #IRQ_MASK_UART_TX
movne \irqnr, #IRQ_CONTX
bne 1001f
tst \irqstat, #IRQ_MASK_PCI_ABORT
movne \irqnr, #IRQ_PCI_ABORT
bne 1001f
tst \irqstat, #IRQ_MASK_PCI_SERR
movne \irqnr, #IRQ_PCI_SERR
bne 1001f
tst \irqstat, #IRQ_MASK_DISCARD_TIMER
movne \irqnr, #IRQ_DISCARD_TIMER
bne 1001f
tst \irqstat, #IRQ_MASK_PCI_DPERR
movne \irqnr, #IRQ_PCI_DPERR
bne 1001f
tst \irqstat, #IRQ_MASK_PCI_PERR
movne \irqnr, #IRQ_PCI_PERR
1001:
.endm
.macro irq_prio_table
.endm
#elif defined(CONFIG_ARCH_NEXUSPCI)
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, =INTCONT_BASE
ldr \base, =soft_irq_mask
ldr \irqstat, [\irqstat] @ get interrupts
ldr \base, [\base]
mov \irqnr, #0
and \irqstat, \irqstat, \base @ mask out disabled ones
1001: tst \irqstat, #1
addeq \irqnr, \irqnr, #1
moveq \irqstat, \irqstat, lsr #1
tsteq \irqnr, #32
beq 1001b
teq \irqnr, #32
.endm
.macro irq_prio_table
.ltorg
.bss
ENTRY(soft_irq_mask)
.word 0
.text
.endm
#elif defined(CONFIG_ARCH_TBOX)
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, =0xffff7000
ldr \irqstat, [\irqstat] @ get interrupts
ldr \base, =soft_irq_mask
ldr \base, [\base]
mov \irqnr, #0
and \irqstat, \irqstat, \base @ mask out disabled ones
1001: tst \irqstat, #1
addeq \irqnr, \irqnr, #1
moveq \irqstat, \irqstat, lsr #1
tsteq \irqnr, #32
beq 1001b
teq \irqnr, #32
.endm
.macro irq_prio_table
.ltorg
.bss
ENTRY(soft_irq_mask)
.word 0
.text
.endm
#elif defined(CONFIG_ARCH_SA1100)
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov r4, #0xfa000000 @ ICIP = 0xfa050000
add r4, r4, #0x00050000
ldr \irqstat, [r4] @ get irqs
ldr \irqnr, [r4, #4] @ ICMR = 0xfa050004
ands \irqstat, \irqstat, \irqnr
mov \irqnr, #0
beq 1001f
tst \irqstat, #0xff
moveq \irqstat, \irqstat, lsr #8
addeq \irqnr, \irqnr, #8
tsteq \irqstat, #0xff
moveq \irqstat, \irqstat, lsr #8
addeq \irqnr, \irqnr, #8
tsteq \irqstat, #0xff
moveq \irqstat, \irqstat, lsr #8
addeq \irqnr, \irqnr, #8
tst \irqstat, #0x0f
moveq \irqstat, \irqstat, lsr #4
addeq \irqnr, \irqnr, #4
tst \irqstat, #0x03
moveq \irqstat, \irqstat, lsr #2
addeq \irqnr, \irqnr, #2
tst \irqstat, #0x01
addeqs \irqnr, \irqnr, #1
1001:
.endm
.macro irq_prio_table
.endm
#elif defined(CONFIG_ARCH_L7200)
#include <asm/hardware.h>
.equ irq_base_addr, IO_BASE_2
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \irqstat, #irq_base_addr @ Virt addr IRQ regs
add \irqstat, \irqstat, #0x00001000 @ Status reg
ldr \irqstat, [\irqstat, #0] @ get interrupts
mov \irqnr, #0
1001: tst \irqstat, #1
addeq \irqnr, \irqnr, #1
moveq \irqstat, \irqstat, lsr #1
tsteq \irqnr, #32
beq 1001b
teq \irqnr, #32
.endm
.macro irq_prio_table
.endm
#elif defined(CONFIG_ARCH_INTEGRATOR)
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
/* FIXME: should not be using soo many LDRs here */
ldr \base, =IO_ADDRESS(INTEGRATOR_IC_BASE)
mov \irqnr, #IRQ_PIC_START
ldr \irqstat, [\base, #IRQ_STATUS] @ get masked status
ldr \base, =IO_ADDRESS(INTEGRATOR_HDR_BASE)
teq \irqstat, #0
ldreq \irqstat, [\base, #(INTEGRATOR_HDR_IC_OFFSET+IRQ_STATUS)]
moveq \irqnr, #IRQ_CIC_START
1001: tst \irqstat, #15
bne 1002f
add \irqnr, \irqnr, #4
movs \irqstat, \irqstat, lsr #4
bne 1001b
1002: tst \irqstat, #1
bne 1003f
add \irqnr, \irqnr, #1
movs \irqstat, \irqstat, lsr #1
bne 1002b
1003: /* EQ will be set if no irqs pending */
.endm
.macro irq_prio_table
.endm
#elif defined(CONFIG_ARCH_VERSATILE_PB)
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =IO_ADDRESS(VERSATILE_VIC_BASE)
ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
mov \irqnr, #0
teq \irqstat, #0
beq 1003f
1001: tst \irqstat, #15
bne 1002f
add \irqnr, \irqnr, #4
movs \irqstat, \irqstat, lsr #4
bne 1001b
1002: tst \irqstat, #1
bne 1003f
add \irqnr, \irqnr, #1
movs \irqstat, \irqstat, lsr #1
bne 1002b
1003: /* EQ will be set if no irqs pending */
@ clz \irqnr, \irqstat
@1003: /* EQ will be set if we reach MAXIRQNUM */
.endm
.macro irq_prio_table
.endm
#elif defined(CONFIG_ARCH_CLPS711X)
#include <asm/hardware/clps7111.h>
.macro disable_fiq
.endm
#if (INTSR2 - INTSR1) != (INTMR2 - INTMR1)
#error INTSR stride != INTMR stride
#endif
.macro get_irqnr_and_base, irqnr, stat, base, mask
mov \base, #CLPS7111_BASE
ldr \stat, [\base, #INTSR1]
ldr \mask, [\base, #INTMR1]
mov \irqnr, #4
mov \mask, \mask, lsl #16
and \stat, \stat, \mask, lsr #16
movs \stat, \stat, lsr #4
bne 1001f
add \base, \base, #INTSR2 - INTSR1
ldr \stat, [\base, #INTSR1]
ldr \mask, [\base, #INTMR1]
mov \irqnr, #16
mov \mask, \mask, lsl #16
and \stat, \stat, \mask, lsr #16
1001: tst \stat, #255
addeq \irqnr, \irqnr, #8
moveq \stat, \stat, lsr #8
tst \stat, #15
addeq \irqnr, \irqnr, #4
moveq \stat, \stat, lsr #4
tst \stat, #3
addeq \irqnr, \irqnr, #2
moveq \stat, \stat, lsr #2
tst \stat, #1
addeq \irqnr, \irqnr, #1
moveq \stat, \stat, lsr #1
tst \stat, #1 @ bit 0 should be set
.endm
.macro irq_prio_table
.endm
#elif defined (CONFIG_ARCH_CAMELOT)
#include <asm/arch/platform.h>
#undef IRQ_MODE /* same name defined in asm/proc/ptrace.h */
#include <asm/arch/int_ctrl00.h>
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, =INT_ID(IO_ADDRESS(EXC_INT_CTRL00_BASE))
ldr \irqnr,[\irqstat]
cmp \irqnr,#0
subne \irqnr,\irqnr,#1
.endm
.macro irq_prio_table
.endm
#elif defined(CONFIG_ARCH_IOP310)
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mrc p13, 0, \irqstat, c4, c0, 0 @ get INTSRC
mrc p13, 0, \base, c0, c0, 0 @ get INTCTL
tst \irqstat, #(1<<29) @ if INTSRC_BI
tstne \base, #(1<<3) @ and INTCTL_BM
movne \irqnr, #IRQ_XS80200_BCU
bne 1001f
tst \irqstat, #(1<<28) @ if INTSRC_PI
tstne \base, #(1<<2) @ and INTCTL_PM
movne \irqnr, #IRQ_XS80200_PMU
bne 1001f
tst \irqstat, #(1<<31) @ if INTSRC_FI
tstne \base, #(1<<0) @ and INTCTL_FM
movne \irqnr, #IRQ_XS80200_EXTFIQ
bne 1001f
tst \irqstat, #(1<<30) @ if INTSRC_II
tstne \base, #(1<<1) @ and INTCTL_IM
movne \irqnr, #IRQ_XS80200_EXTIRQ
1001:
.endm
.macro irq_prio_table
.endm
#elif defined(CONFIG_ARCH_IOP321)
.macro disable_fiq
.endm
/*
* Note: only deal with normal interrupts, not FIQ
*/
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \irqnr, #0
mrc p6, 0, \irqstat, c8, c0, 0 @ Read IINTSRC
cmp \irqstat, #0
beq 1001f
clz \irqnr, \irqstat
mov \base, #31
subs \irqnr,\base,\irqnr
add \irqnr,\irqnr,#IRQ_IOP321_DMA0_EOT
1001:
.endm
.macro irq_prio_table
.endm
#elif defined(CONFIG_ARCH_PXA)
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
#ifdef CONFIG_PXA27x
mrc p6, 0, \irqstat, c0, c0, 0 @ ICIP
mrc p6, 0, \irqnr, c1, c0, 0 @ ICMR
#else
mov \base, #io_p2v(0x40000000) @ IIR Ctl = 0x40d00000
add \base, \base, #0x00d00000
ldr \irqstat, [\base, #0] @ ICIP
ldr \irqnr, [\base, #4] @ ICMR
#endif
ands \irqnr, \irqstat, \irqnr
beq 1001f
rsb \irqstat, \irqnr, #0
and \irqstat, \irqstat, \irqnr
clz \irqnr, \irqstat
rsb \irqnr, \irqnr, #(31 - PXA_IRQ_SKIP)
1001:
.endm
.macro irq_prio_table
.endm
#elif defined (CONFIG_ARCH_IXP4XX)
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET)
ldr \irqstat, [\irqstat] @ get interrupts
cmp \irqstat, #0
beq 1002f
clz \irqnr, \irqstat
mov \base, #31
subs \irqnr, \base, \irqnr
/*
1001: tst \irqstat, #1
addeq \irqnr, \irqnr, #1
moveq \irqstat, \irqstat, lsr #1
tsteq \irqnr, #32
beq 1001b
teq \irqnr, #32
*/
1002:
.endm
.macro irq_prio_table
.endm
#elif defined(CONFIG_ARCH_OMAP)
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =IO_ADDRESS(OMAP_IH1_BASE)
ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET]
ldr \tmp, [\base, #IRQ_MIR_REG_OFFSET]
mov \irqstat, #0xffffffff
bic \tmp, \irqstat, \tmp
tst \irqnr, \tmp
beq 1510f
ldr \irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
cmp \irqnr, #0
ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
cmpeq \irqnr, #INT_IH2_IRQ
ldreq \base, =IO_ADDRESS(OMAP_IH2_BASE)
ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
addeqs \irqnr, \irqnr, #32
1510:
.endm
.macro irq_prio_table
.endm
#elif defined(CONFIG_ARCH_S3C2410)
/* S3C2410X IRQ Handler, <ben@simtec.co.uk> */
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
30000:
mov \tmp, #S3C2410_VA_IRQ
ldr \irqnr, [ \tmp, #0x14 ] @ get irq no
teq \irqnr, #4
teqne \irqnr, #5
beq 1002f @ external irq reg
teq \irqnr, #16
beq 1003f @ lcd controller
@ debug check to see if interrupt reported is the same
@ as the offset....
teq \irqnr, #0
beq 20002f
ldr \irqstat, [ \tmp, #0x10 ] @ INTPND
mov \irqstat, \irqstat, lsr \irqnr
tst \irqstat, #1
bne 20002f
#if 1
stmfd r13!, { r0 - r4 , r14 }
ldr r1, [ \tmp, #0x14 ] @ intoffset
ldr r2, [ \tmp, #0x10 ] @ INTPND
ldr r3, [ \tmp, #0x00 ] @ SRCPND
adr r0, 20003f
bl printk
b 20004f
#endif
20003:
.ascii "<7>irq: err - bad offset %d, intpnd=%08x, srcpnd=%08x\n"
.byte 0
.align 4
20004:
mov r1, #1
mov \tmp, #S3C2410_VA_IRQ
ldmfd r13!, { r0 - r4 , r14 }
@ try working out interript number for ourselves
mov \irqnr, #0
ldr \irqstat, [ \tmp, #0x10 ] @ INTPND
10021:
movs \irqstat, \irqstat, lsr#1
bcs 30000b @ try and re-start the proccess
add \irqnr, \irqnr, #1
cmp \irqnr, #32
ble 10021b
@ found no interrupt, set Z flag and leave
movs \irqnr, #0
b 1001f
20005:
20002: @ exit
@ we base the s3c2410x interrupts at 16 and above to allow
@ isa peripherals to have their standard interrupts, also
@ ensure that Z flag is un-set on exit
@ note, we cannot be sure if we get IRQ_EINT0 (0) that
@ there is simply no interrupt pending, so in all other
@ cases we jump to say we have found something, otherwise
@ we check to see if the interrupt really is assrted
adds \irqnr, \irqnr, #IRQ_EINT0
teq \irqnr, #IRQ_EINT0
bne 1001f @ exit
ldr \irqstat, [ \tmp, #0x10 ] @ INTPND
teq \irqstat, #0
moveq \irqnr, #0
b 1001f
@ we get here from no main or external interrupts pending
1002:
add \tmp, \tmp, #S3C2410_VA_GPIO - S3C2410_VA_IRQ
ldr \irqstat, [ \tmp, # 0xa8 ] @ EXTINTPEND
ldr \irqnr, [ \tmp, # 0xa4 ] @ EXTINTMASK
bic \irqstat, \irqstat, \irqnr @ clear masked irqs
mov \irqnr, #IRQ_EINT4 @ start extint nos
mov \irqstat, \irqstat, lsr#4 @ ignore bottom 4 bits
10021:
movs \irqstat, \irqstat, lsr#1
bcs 1004f
add \irqnr, \irqnr, #1
cmp \irqnr, #IRQ_EINT23
ble 10021b
@ found no interrupt, set Z flag and leave
movs \irqnr, #0
b 1001f
1003:
@ lcd interrupt has been asserted...
add \tmp, \tmp, #S3C2410_VA_LCD - S3C2410_VA_IRQ
ldr \irqstat, [ \tmp, # 0x54 ] @ lcd int pending
tst \irqstat, #2
movne \irqnr, #IRQ_LCD_FRAME
tst \irqstat, #1
movne \irqnr, #IRQ_LCD_FIFO
@ fall through to exit with flags updated
1004: @ ensure Z flag clear in case our MOVS shifted out the last bit
teq \irqnr, #0
1001:
@ exit irq routine
.endm
/* currently don't need an disable_fiq macro */
.macro disable_fiq
.endm
/* we don't have an irq priority table */
.macro irq_prio_table
.endm
#elif defined(CONFIG_ARCH_LH7A400)
# if defined (CONFIG_ARCH_LH7A404)
# error "LH7A400 and LH7A404 are mutually exclusive"
# endif
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \irqnr, #0
mov \base, #io_p2v(0x80000000) @ APB registers
ldr \irqstat, [\base, #0x500] @ PIC INTSR
1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry
bcs 1008f @ Bit set; irq found
add \irqnr, \irqnr, #1
bne 1001b @ Until no bits
b 1009f @ Nothing? Hmm.
1008: movs \irqstat, #1 @ Force !Z
1009:
.endm
.macro irq_prio_table
.endm
#elif defined(CONFIG_ARCH_LH7A404)
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \irqnr, #0 @ VIC1 irq base
mov \base, #io_p2v(0x80000000) @ APB registers
add \base, \base, #0x8000
ldr \tmp, [\base, #0x0030] @ VIC1_VECTADDR
tst \tmp, #VA_VECTORED @ Direct vectored
bne 1002f
tst \tmp, #VA_VIC1DEFAULT @ Default vectored VIC1
ldrne \irqstat, [\base, #0] @ VIC1_IRQSTATUS
bne 1001f
add \base, \base, #(0xa000 - 0x8000)
ldr \tmp, [\base, #0x0030] @ VIC2_VECTADDR
tst \tmp, #VA_VECTORED @ Direct vectored
bne 1002f
ldr \irqstat, [\base, #0] @ VIC2_IRQSTATUS
mov \irqnr, #32 @ VIC2 irq base
1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry
bcs 1008f @ Bit set; irq found
add \irqnr, \irqnr, #1
bne 1001b @ Until no bits
b 1009f @ Nothing? Hmm.
1002: and \irqnr, \tmp, #0x3f @ Mask for valid bits
1008: movs \irqstat, #1 @ Force !Z
str \tmp, [\base, #0x0030] @ Clear vector
1009:
.endm
.macro irq_prio_table
.endm
#else
#error Unknown architecture
#endif
/*
* Invalid mode handlers
*/
__pabt_invalid: sub sp, sp, #S_FRAME_SIZE @ Allocate frame size in one go
stmia sp, {r0 - lr} @ Save XXX r0 - lr
ldr r4, .LCabt
mov r1, #BAD_PREFETCH
b 1f
__dabt_invalid: sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - lr} @ Save SVC r0 - lr [lr *should* be intact]
ldr r4, .LCabt
mov r1, #BAD_DATA
b 1f
__irq_invalid: sub sp, sp, #S_FRAME_SIZE @ Allocate space on stack for frame
stmfd sp, {r0 - lr} @ Save r0 - lr
ldr r4, .LCirq
mov r1, #BAD_IRQ
b 1f
__und_invalid: sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - lr}
ldr r4, .LCund
mov r1, #BAD_UNDEFINSTR @ int reason
1: zero_fp
ldmia r4, {r5 - r7} @ Get XXX pc, cpsr, old_r0
add r4, sp, #S_PC
stmia r4, {r5 - r7} @ Save XXX pc, cpsr, old_r0
mov r0, sp
and r2, r6, #31 @ int mode
b bad_mode
/*
* SVC mode handlers
*/
.align 5
__dabt_svc: sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - r12} @ save r0 - r12
ldr r2, .LCabt
add r0, sp, #S_FRAME_SIZE
ldmia r2, {r2 - r4} @ get pc, cpsr
add r5, sp, #S_SP
mov r1, lr
stmia r5, {r0 - r4} @ save sp_SVC, lr_SVC, pc, cpsr, old_ro
mrs r9, cpsr @ Enable interrupts if they were
tst r3, #PSR_I_BIT
biceq r9, r9, #PSR_I_BIT @ previously
/*
* This routine must not corrupt r9
*/
#ifdef MULTI_ABORT
ldr r4, .LCprocfns @ pass r2, r3 to
mov lr, pc @ processor code
ldr pc, [r4] @ call processor specific code
#else
bl CPU_ABORT_HANDLER
#endif
msr cpsr_c, r9
mov r2, sp
bl do_DataAbort
disable_irq r0
ldr r0, [sp, #S_PSR]
msr spsr_cxsf, r0
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
.align 5
__irq_svc: sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - r12} @ save r0 - r12
ldr r7, .LCirq
add r5, sp, #S_FRAME_SIZE
ldmia r7, {r7 - r9}
add r4, sp, #S_SP
mov r6, lr
stmia r4, {r5, r6, r7, r8, r9} @ save sp_SVC, lr_SVC, pc, cpsr, old_ro
#ifdef CONFIG_PREEMPT
get_thread_info r8
ldr r9, [r8, #TI_PREEMPT] @ get preempt count
add r7, r9, #1 @ increment it
str r7, [r8, #TI_PREEMPT]
#endif
1: get_irqnr_and_base r0, r6, r5, lr
movne r1, sp
@
@ routine called with r0 = irq number, r1 = struct pt_regs *
@
adrsvc ne, lr, 1b
bne asm_do_IRQ
#ifdef CONFIG_PREEMPT
ldr r0, [r8, #TI_FLAGS] @ get flags
tst r0, #_TIF_NEED_RESCHED
blne svc_preempt
preempt_return:
ldr r0, [r8, #TI_PREEMPT] @ read preempt value
teq r0, r7
str r9, [r8, #TI_PREEMPT] @ restore preempt count
strne r0, [r0, -r0] @ bug()
#endif
ldr r0, [sp, #S_PSR] @ irqs are already disabled
msr spsr_cxsf, r0
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
.ltorg
#ifdef CONFIG_PREEMPT
svc_preempt: teq r9, #0 @ was preempt count = 0
ldreq r6, .LCirq_stat
movne pc, lr @ no
ldr r0, [r6, #4] @ local_irq_count
ldr r1, [r6, #8] @ local_bh_count
adds r0, r0, r1
movne pc, lr
mov r7, #PREEMPT_ACTIVE
str r7, [r8, #TI_PREEMPT] @ set PREEMPT_ACTIVE
1: enable_irq r2 @ enable IRQs
bl schedule
disable_irq r0 @ disable IRQs
ldr r0, [r8, #TI_FLAGS] @ get new tasks TI_FLAGS
tst r0, #_TIF_NEED_RESCHED
beq preempt_return @ go again
b 1b
#endif
.align 5
__und_svc: sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - r12} @ save r0 - r12
ldr r3, .LCund
mov r4, lr
ldmia r3, {r5 - r7}
add r3, sp, #S_FRAME_SIZE
add r2, sp, #S_SP
stmia r2, {r3 - r7} @ save sp_SVC, lr_SVC, pc, cpsr, old_ro
ldr r0, [r5, #-4] @ r0 = instruction
adrsvc al, r9, 1f @ r9 = normal FP return
bl call_fpe @ lr = undefined instr return
mov r0, sp @ struct pt_regs *regs
bl do_undefinstr
1: disable_irq r0
ldr lr, [sp, #S_PSR] @ Get SVC cpsr
msr spsr_cxsf, lr
ldmia sp, {r0 - pc}^ @ Restore SVC registers
.align 5
__pabt_svc: sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - r12} @ save r0 - r12
ldr r2, .LCabt
add r0, sp, #S_FRAME_SIZE
ldmia r2, {r2 - r4} @ get pc, cpsr
add r5, sp, #S_SP
mov r1, lr
stmia r5, {r0 - r4} @ save sp_SVC, lr_SVC, pc, cpsr, old_ro
mrs r9, cpsr @ Enable interrupts if they were
tst r3, #PSR_I_BIT
biceq r9, r9, #PSR_I_BIT @ previously
msr cpsr_c, r9
mov r0, r2 @ address (pc)
mov r1, sp @ regs
bl do_PrefetchAbort @ call abort handler
disable_irq r0
ldr r0, [sp, #S_PSR]
msr spsr_cxsf, r0
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
.align 5
.LCirq: .word __temp_irq
.LCund: .word __temp_und
.LCabt: .word __temp_abt
#ifdef MULTI_ABORT
.LCprocfns: .word processor
#endif
.LCfp: .word fp_enter
#ifdef CONFIG_PREEMPT
.LCirq_stat: .word irq_stat
#endif
irq_prio_table
/*
* User mode handlers
*/
.align 5
__dabt_usr: sub sp, sp, #S_FRAME_SIZE @ Allocate frame size in one go
stmia sp, {r0 - r12} @ save r0 - r12
ldr r7, .LCabt
add r5, sp, #S_PC
ldmia r7, {r2 - r4} @ Get USR pc, cpsr
stmia r5, {r2 - r4} @ Save USR pc, cpsr, old_r0
stmdb r5, {sp, lr}^
alignment_trap r7, r7, __temp_abt
zero_fp
#ifdef MULTI_ABORT
ldr r4, .LCprocfns @ pass r2, r3 to
mov lr, pc @ processor code
ldr pc, [r4] @ call processor specific code
#else
bl CPU_ABORT_HANDLER
#endif
enable_irq r2 @ Enable interrupts
mov r2, sp
adrsvc al, lr, ret_from_exception
b do_DataAbort
.align 5
__irq_usr: sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - r12} @ save r0 - r12
ldr r4, .LCirq
add r8, sp, #S_PC
ldmia r4, {r5 - r7} @ get saved PC, SPSR
stmia r8, {r5 - r7} @ save pc, psr, old_r0
stmdb r8, {sp, lr}^
alignment_trap r4, r7, __temp_irq
zero_fp
#ifdef CONFIG_PREEMPT
get_thread_info r8
ldr r9, [r8, #TI_PREEMPT] @ get preempt count
add r7, r9, #1 @ increment it
str r7, [r8, #TI_PREEMPT]
#endif
1: get_irqnr_and_base r0, r6, r5, lr
movne r1, sp
adrsvc ne, lr, 1b
@
@ routine called with r0 = irq number, r1 = struct pt_regs *
@
bne asm_do_IRQ
#ifdef CONFIG_PREEMPT
ldr r0, [r8, #TI_PREEMPT]
teq r0, r7
str r9, [r8, #TI_PREEMPT]
strne r0, [r0, -r0]
mov tsk, r8
#else
get_thread_info tsk
#endif
mov why, #0
b ret_to_user
.ltorg
.align 5
__und_usr: sub sp, sp, #S_FRAME_SIZE @ Allocate frame size in one go
stmia sp, {r0 - r12} @ Save r0 - r12
ldr r4, .LCund
add r8, sp, #S_PC
ldmia r4, {r5 - r7}
stmia r8, {r5 - r7} @ Save USR pc, cpsr, old_r0
stmdb r8, {sp, lr}^ @ Save user sp, lr
alignment_trap r4, r7, __temp_und
zero_fp
tst r6, #PSR_T_BIT @ Thumb mode?
bne fpundefinstr @ ignore FP
sub r4, r5, #4
1: ldrt r0, [r4] @ r0 = instruction
adrsvc al, r9, ret_from_exception @ r9 = normal FP return
adrsvc al, lr, fpundefinstr @ lr = undefined instr return
/*
* The out of line fixup for the ldrt above.
*/
.section .fixup, "ax"
2: mov pc, r9
.previous
.section __ex_table,"a"
.long 1b, 2b
.previous
/*
* r0 = instruction.
*
* Check whether the instruction is a co-processor instruction.
* If yes, we need to call the relevant co-processor handler.
*
* Note that we don't do a full check here for the co-processor
* instructions; all instructions with bit 27 set are well
* defined. The only instructions that should fault are the
* co-processor instructions. However, we have to watch out
* for the ARM6/ARM7 SWI bug.
*
* Emulators may wish to make use of the following registers:
* r0 - instruction opcode.
* r10 - this threads thread_info structure.
*/
call_fpe: enable_irq r10 @ Enable interrupts
tst r0, #0x08000000 @ only CDP/CPRT/LDC/STC have bit 27
#if defined(CONFIG_CPU_ARM610) || defined(CONFIG_CPU_ARM710)
and r8, r0, #0x0f000000 @ mask out op-code bits
teqne r8, #0x0f000000 @ SWI (ARM6/7 bug)?
#endif
moveq pc, lr
get_thread_info r10 @ get current thread
and r8, r0, #0x00000f00 @ mask out CP number
mov r7, #1
add r6, r10, #TI_USED_CP
strb r7, [r6, r8, lsr #8] @ set appropriate used_cp[]
add pc, pc, r8, lsr #6
mov r0, r0
mov pc, lr @ CP#0
b do_fpe @ CP#1 (FPE)
b do_fpe @ CP#2 (FPE)
mov pc, lr @ CP#3
mov pc, lr @ CP#4
mov pc, lr @ CP#5
mov pc, lr @ CP#6
mov pc, lr @ CP#7
mov pc, lr @ CP#8
mov pc, lr @ CP#9
#ifdef CONFIG_VFP
b do_vfp @ CP#10 (VFP)
b do_vfp @ CP#11 (VFP)
#else
mov pc, lr @ CP#10 (VFP)
mov pc, lr @ CP#11 (VFP)
#endif
mov pc, lr @ CP#12
mov pc, lr @ CP#13
mov pc, lr @ CP#14 (Debug)
mov pc, lr @ CP#15 (Control)
do_fpe: ldr r4, .LCfp
add r10, r10, #TI_FPSTATE @ r10 = workspace
ldr pc, [r4] @ Call FP module USR entry point
/*
* The FP module is called with these registers set:
* r0 = instruction
* r5 = PC
* r9 = normal "successful" return address
* r10 = FP workspace
* lr = unrecognised FP instruction return address
*/
.data
ENTRY(fp_enter)
.word fpundefinstr
.text
fpundefinstr: mov r0, sp
adrsvc al, lr, ret_from_exception
b do_undefinstr
.align 5
__pabt_usr: sub sp, sp, #S_FRAME_SIZE @ Allocate frame size in one go
stmia sp, {r0 - r12} @ Save r0 - r12
ldr r4, .LCabt
add r8, sp, #S_PC
ldmia r4, {r5 - r7} @ Get USR pc, cpsr
stmia r8, {r5 - r7} @ Save USR pc, cpsr, old_r0
stmdb r8, {sp, lr}^ @ Save sp_usr lr_usr
alignment_trap r4, r7, __temp_abt
zero_fp
enable_irq r0 @ Enable interrupts
mov r0, r5 @ address (pc)
mov r1, sp @ regs
bl do_PrefetchAbort @ call abort handler
/* fall through */
/*
* This is the return code to user mode for abort handlers
*/
ENTRY(ret_from_exception)
get_thread_info tsk
mov why, #0
b ret_to_user
/*
* Register switch for ARMv3 and ARMv4 processors
* r0 = previous task_struct, r1 = previous thread_info, r2 = next thread_info
* previous and next are guaranteed not to be the same.
*/
ENTRY(__switch_to)
add ip, r1, #TI_CPU_SAVE
ldr r3, [r2, #TI_CPU_DOMAIN]!
stmia ip, {r4 - sl, fp, sp, lr} @ Store most regs on stack
mcr p15, 0, r3, c3, c0, 0 @ Set domain register
#ifdef CONFIG_VFP
@ Always disable VFP so we can lazily save/restore the old
@ state. This occurs in the context of the previous thread.
VFPFMRX r4, FPEXC
bic r4, r4, #FPEXC_ENABLE
VFPFMXR FPEXC, r4
#endif
ldmib r2, {r4 - sl, fp, sp, pc} @ Load all regs saved previously
__INIT
/*
* Vector stubs. NOTE that we only align 'vector_IRQ' to a cache line boundary,
* and we rely on each stub being exactly 48 (1.5 cache lines) in size. This
* means that we only ever load two cache lines for this code, or one if we're
* lucky. We also copy this code to 0x200 so that we can use branches in the
* vectors, rather than ldr's.
*/
.align 5
__stubs_start:
/*
* Interrupt dispatcher
* Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
*/
vector_IRQ: @
@ save mode specific registers
@
ldr r13, .LCsirq
sub lr, lr, #4
str lr, [r13] @ save lr_IRQ
mrs lr, spsr
str lr, [r13, #4] @ save spsr_IRQ
@
@ now branch to the relevant MODE handling routine
@
mrs r13, cpsr
bic r13, r13, #MODE_MASK
orr r13, r13, #MODE_SVC
msr spsr_cxsf, r13 @ switch to SVC_32 mode
and lr, lr, #15
ldr lr, [pc, lr, lsl #2]
movs pc, lr @ Changes mode and branches
.LCtab_irq: .word __irq_usr @ 0 (USR_26 / USR_32)
.word __irq_invalid @ 1 (FIQ_26 / FIQ_32)
.word __irq_invalid @ 2 (IRQ_26 / IRQ_32)
.word __irq_svc @ 3 (SVC_26 / SVC_32)
.word __irq_invalid @ 4
.word __irq_invalid @ 5
.word __irq_invalid @ 6
.word __irq_invalid @ 7
.word __irq_invalid @ 8
.word __irq_invalid @ 9
.word __irq_invalid @ a
.word __irq_invalid @ b
.word __irq_invalid @ c
.word __irq_invalid @ d
.word __irq_invalid @ e
.word __irq_invalid @ f
.align 5
/*
* Data abort dispatcher - dispatches it to the correct handler for the processor mode
* Enter in ABT mode, spsr = USR CPSR, lr = USR PC
*/
vector_data: @
@ save mode specific registers
@
ldr r13, .LCsabt
sub lr, lr, #8
str lr, [r13]
mrs lr, spsr
str lr, [r13, #4]
@
@ now branch to the relevant MODE handling routine
@
mrs r13, cpsr
bic r13, r13, #MODE_MASK
orr r13, r13, #MODE_SVC
msr spsr_cxsf, r13 @ switch to SVC_32 mode
and lr, lr, #15
ldr lr, [pc, lr, lsl #2]
movs pc, lr @ Changes mode and branches
.LCtab_dabt: .word __dabt_usr @ 0 (USR_26 / USR_32)
.word __dabt_invalid @ 1 (FIQ_26 / FIQ_32)
.word __dabt_invalid @ 2 (IRQ_26 / IRQ_32)
.word __dabt_svc @ 3 (SVC_26 / SVC_32)
.word __dabt_invalid @ 4
.word __dabt_invalid @ 5
.word __dabt_invalid @ 6
.word __dabt_invalid @ 7
.word __dabt_invalid @ 8
.word __dabt_invalid @ 9
.word __dabt_invalid @ a
.word __dabt_invalid @ b
.word __dabt_invalid @ c
.word __dabt_invalid @ d
.word __dabt_invalid @ e
.word __dabt_invalid @ f
.align 5
/*
* Prefetch abort dispatcher - dispatches it to the correct handler for the processor mode
* Enter in ABT mode, spsr = USR CPSR, lr = USR PC
*/
vector_prefetch:
@
@ save mode specific registers
@
ldr r13, .LCsabt
sub lr, lr, #4
str lr, [r13] @ save lr_ABT
mrs lr, spsr
str lr, [r13, #4] @ save spsr_ABT
@
@ now branch to the relevant MODE handling routine
@
mrs r13, cpsr
bic r13, r13, #MODE_MASK
orr r13, r13, #MODE_SVC
msr spsr_cxsf, r13 @ switch to SVC_32 mode
ands lr, lr, #15
ldr lr, [pc, lr, lsl #2]
movs pc, lr
.LCtab_pabt: .word __pabt_usr @ 0 (USR_26 / USR_32)
.word __pabt_invalid @ 1 (FIQ_26 / FIQ_32)
.word __pabt_invalid @ 2 (IRQ_26 / IRQ_32)
.word __pabt_svc @ 3 (SVC_26 / SVC_32)
.word __pabt_invalid @ 4
.word __pabt_invalid @ 5
.word __pabt_invalid @ 6
.word __pabt_invalid @ 7
.word __pabt_invalid @ 8
.word __pabt_invalid @ 9
.word __pabt_invalid @ a
.word __pabt_invalid @ b
.word __pabt_invalid @ c
.word __pabt_invalid @ d
.word __pabt_invalid @ e
.word __pabt_invalid @ f
.align 5
/*
* Undef instr entry dispatcher - dispatches it to the correct handler for the processor mode
* Enter in UND mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
*/
vector_undefinstr:
@
@ save mode specific registers
@
ldr r13, .LCsund
str lr, [r13] @ save lr_UND
mrs lr, spsr
str lr, [r13, #4] @ save spsr_UND
@
@ now branch to the relevant MODE handling routine
@
mrs r13, cpsr
bic r13, r13, #MODE_MASK
orr r13, r13, #MODE_SVC
msr spsr_cxsf, r13 @ switch to SVC_32 mode
and lr, lr, #15
ldr lr, [pc, lr, lsl #2]
movs pc, lr @ Changes mode and branches
.LCtab_und: .word __und_usr @ 0 (USR_26 / USR_32)
.word __und_invalid @ 1 (FIQ_26 / FIQ_32)
.word __und_invalid @ 2 (IRQ_26 / IRQ_32)
.word __und_svc @ 3 (SVC_26 / SVC_32)
.word __und_invalid @ 4
.word __und_invalid @ 5
.word __und_invalid @ 6
.word __und_invalid @ 7
.word __und_invalid @ 8
.word __und_invalid @ 9
.word __und_invalid @ a
.word __und_invalid @ b
.word __und_invalid @ c
.word __und_invalid @ d
.word __und_invalid @ e
.word __und_invalid @ f
.align 5
/*=============================================================================
* Undefined FIQs
*-----------------------------------------------------------------------------
* Enter in FIQ mode, spsr = ANY CPSR, lr = ANY PC
* MUST PRESERVE SVC SPSR, but need to switch to SVC mode to show our msg.
* Basically to switch modes, we *HAVE* to clobber one register... brain
* damage alert! I don't think that we can execute any code in here in any
* other mode than FIQ... Ok you can switch to another mode, but you can't
* get out of that mode without clobbering one register.
*/
vector_FIQ: disable_fiq
subs pc, lr, #4
/*=============================================================================
* Address exception handler
*-----------------------------------------------------------------------------
* These aren't too critical.
* (they're not supposed to happen, and won't happen in 32-bit data mode).
*/
vector_addrexcptn:
b vector_addrexcptn
/*
* We group all the following data together to optimise
* for CPUs with separate I & D caches.
*/
.align 5
.LCvswi: .word vector_swi
.LCsirq: .word __temp_irq
.LCsund: .word __temp_und
.LCsabt: .word __temp_abt
__stubs_end:
.equ __real_stubs_start, .LCvectors + 0x200
.LCvectors: swi SYS_ERROR0
b __real_stubs_start + (vector_undefinstr - __stubs_start)
ldr pc, __real_stubs_start + (.LCvswi - __stubs_start)
b __real_stubs_start + (vector_prefetch - __stubs_start)
b __real_stubs_start + (vector_data - __stubs_start)
b __real_stubs_start + (vector_addrexcptn - __stubs_start)
b __real_stubs_start + (vector_IRQ - __stubs_start)
b __real_stubs_start + (vector_FIQ - __stubs_start)
ENTRY(__trap_init)
stmfd sp!, {r4 - r6, lr}
adr r1, .LCvectors @ set up the vectors
ldmia r1, {r1, r2, r3, r4, r5, r6, ip, lr}
stmia r0, {r1, r2, r3, r4, r5, r6, ip, lr}
add r2, r0, #0x200
adr r0, __stubs_start @ copy stubs to 0x200
adr r1, __stubs_end
1: ldr r3, [r0], #4
str r3, [r2], #4
cmp r0, r1
blt 1b
LOADREGS(fd, sp!, {r4 - r6, pc})
.data
/*
* Do not reorder these, and do not insert extra data between...
*/
__temp_irq: .word 0 @ saved lr_irq
.word 0 @ saved spsr_irq
.word -1 @ old_r0
__temp_und: .word 0 @ Saved lr_und
.word 0 @ Saved spsr_und
.word -1 @ old_r0
__temp_abt: .word 0 @ Saved lr_abt
.word 0 @ Saved spsr_abt
.word -1 @ old_r0
.globl cr_alignment
.globl cr_no_alignment
cr_alignment:
.space 4
cr_no_alignment:
.space 4
![[BACK]](/icons/back.gif){kind=icon}
Return to entry-armv.S CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [Development] / linux-2.6-xfs / arch / arm / kernel