File: [Development] / linux-2.6-xfs / arch / arm / kernel / debug.S (download)
Revision 1.7, Tue Oct 12 15:46:48 2004 UTC (13 years ago) by nathans.longdrop.melbourne.sgi.com
Branch: MAIN
Changes since 1.6: +30 -0
lines
Merge up to 2.6.9-rc4
Merge of 2.6.x-xfs-melb:linux:19727a by kenmcd.
|
/*
* linux/arch/arm/kernel/debug-armv.S
*
* Copyright (C) 1994-1999 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* 32-bit debugging code
*/
#include <linux/config.h>
#include <linux/linkage.h>
#include <asm/hardware.h>
.text
/*
* Some debugging routines (useful if you've got MM problems and
* printk isn't working). For DEBUGGING ONLY!!! Do not leave
* references to these in a production kernel!
*/
#if defined(CONFIG_ARCH_RPC)
.macro addruart,rx
mov \rx, #0xe0000000
orr \rx, \rx, #0x00010000
orr \rx, \rx, #0x00000fe0
.endm
.macro senduart,rd,rx
strb \rd, [\rx]
.endm
.macro busyuart,rd,rx
1001: ldrb \rd, [\rx, #0x14]
and \rd, \rd, #0x60
teq \rd, #0x60
bne 1001b
.endm
.macro waituart,rd,rx
1001: ldrb \rd, [\rx, #0x18]
tst \rd, #0x10
beq 1001b
.endm
#elif defined(CONFIG_DEBUG_ICEDCC)
@@ debug using ARM EmbeddedICE DCC channel
.macro addruart, rx
.endm
.macro senduart, rd, rx
mcr p14, 0, \rd, c1, c0, 0
.endm
.macro busyuart, rd, rx
1001:
mrc p14, 0, \rx, c0, c0, 0
tst \rx, #2
beq 1001b
.endm
.macro waituart, rd, rx
mov \rd, #0x2000000
1001:
subs \rd, \rd, #1
bmi 1002f
mrc p14, 0, \rx, c0, c0, 0
tst \rx, #2
bne 1001b
1002:
.endm
#elif defined(CONFIG_ARCH_EBSA110)
.macro addruart,rx
mov \rx, #0xf0000000
orr \rx, \rx, #0x00000be0
.endm
.macro senduart,rd,rx
strb \rd, [\rx]
.endm
.macro busyuart,rd,rx
1002: ldrb \rd, [\rx, #0x14]
and \rd, \rd, #0x60
teq \rd, #0x60
bne 1002b
.endm
.macro waituart,rd,rx
1001: ldrb \rd, [\rx, #0x18]
tst \rd, #0x10
beq 1001b
.endm
#elif defined(CONFIG_ARCH_SHARK)
.macro addruart,rx
mov \rx, #0xe0000000
orr \rx, \rx, #0x000003f8
.endm
.macro senduart,rd,rx
strb \rd, [\rx]
.endm
.macro busyuart,rd,rx
mov \rd, #0
1001: add \rd, \rd, #1
teq \rd, #0x10000
bne 1001b
.endm
.macro waituart,rd,rx
.endm
#elif defined(CONFIG_FOOTBRIDGE)
#include <asm/hardware/dec21285.h>
#ifndef CONFIG_DEBUG_DC21285_PORT
/* For NetWinder debugging */
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x7c000000 @ physical
movne \rx, #0xff000000 @ virtual
orr \rx, \rx, #0x000003f8
.endm
.macro senduart,rd,rx
strb \rd, [\rx]
.endm
.macro busyuart,rd,rx
1002: ldrb \rd, [\rx, #0x5]
and \rd, \rd, #0x60
teq \rd, #0x60
bne 1002b
.endm
.macro waituart,rd,rx
1001: ldrb \rd, [\rx, #0x6]
tst \rd, #0x10
beq 1001b
.endm
#else
/* For EBSA285 debugging */
.equ dc21285_high, ARMCSR_BASE & 0xff000000
.equ dc21285_low, ARMCSR_BASE & 0x00ffffff
.macro addruart,rx
mov \rx, #dc21285_high
.if dc21285_low
orr \rx, \rx, #dc21285_low
.endif
.endm
.macro senduart,rd,rx
str \rd, [\rx, #0x160] @ UARTDR
.endm
.macro busyuart,rd,rx
1001: ldr \rd, [\rx, #0x178] @ UARTFLG
tst \rd, #1 << 3
bne 1001b
.endm
.macro waituart,rd,rx
.endm
#endif
#elif defined(CONFIG_ARCH_FTVPCI)
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
movne \rx, #0xe0000000
moveq \rx, #0x10000000
.endm
.macro senduart,rd,rx
str \rd, [\rx, #0xc]
.endm
.macro busyuart,rd,rx
1001: ldr \rd, [\rx, #0x4]
tst \rd, #1 << 2
beq 1001b
.endm
.macro waituart,rd,rx
.endm
#elif defined(CONFIG_ARCH_SA1100)
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x80000000 @ physical base address
movne \rx, #0xf8000000 @ virtual address
@ We probe for the active serial port here, coherently with
@ the comment in include/asm-arm/arch-sa1100/uncompress.h.
@ We assume r1 can be clobbered.
@ see if Ser3 is active
add \rx, \rx, #0x00050000
ldr r1, [\rx, #UTCR3]
tst r1, #UTCR3_TXE
@ if Ser3 is inactive, then try Ser1
addeq \rx, \rx, #(0x00010000 - 0x00050000)
ldreq r1, [\rx, #UTCR3]
tsteq r1, #UTCR3_TXE
@ if Ser1 is inactive, then try Ser2
addeq \rx, \rx, #(0x00030000 - 0x00010000)
ldreq r1, [\rx, #UTCR3]
tsteq r1, #UTCR3_TXE
@ if all ports are inactive, then there is nothing we can do
moveq pc, lr
.endm
.macro senduart,rd,rx
str \rd, [\rx, #UTDR]
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #UTSR1]
tst \rd, #UTSR1_TNF
beq 1001b
.endm
.macro busyuart,rd,rx
1001: ldr \rd, [\rx, #UTSR1]
tst \rd, #UTSR1_TBY
bne 1001b
.endm
#elif defined(CONFIG_ARCH_PXA)
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x40000000 @ physical
movne \rx, #io_p2v(0x40000000) @ virtual
orr \rx, \rx, #0x00100000
.endm
.macro senduart,rd,rx
str \rd, [\rx, #0]
.endm
.macro busyuart,rd,rx
1002: ldr \rd, [\rx, #0x14]
tst \rd, #(1 << 6)
beq 1002b
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #0x14]
tst \rd, #(1 << 5)
beq 1001b
.endm
#elif defined(CONFIG_ARCH_CLPS7500)
.macro addruart,rx
mov \rx, #0xe0000000
orr \rx, \rx, #0x00010000
orr \rx, \rx, #0x00000be0
.endm
.macro senduart,rd,rx
strb \rd, [\rx]
.endm
.macro busyuart,rd,rx
.endm
.macro waituart,rd,rx
1001: ldrb \rd, [\rx, #0x14]
tst \rd, #0x20
beq 1001b
.endm
#elif defined(CONFIG_ARCH_L7200)
.equ io_virt, IO_BASE
.equ io_phys, IO_START
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #io_phys @ physical base address
movne \rx, #io_virt @ virtual address
add \rx, \rx, #0x00044000 @ UART1
@ add \rx, \rx, #0x00045000 @ UART2
.endm
.macro senduart,rd,rx
str \rd, [\rx, #0x0] @ UARTDR
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #0x18] @ UARTFLG
tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full
bne 1001b
.endm
.macro busyuart,rd,rx
1001: ldr \rd, [\rx, #0x18] @ UARTFLG
tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy
bne 1001b
.endm
#elif defined(CONFIG_ARCH_INTEGRATOR)
#include <asm/hardware/amba_serial.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x16000000 @ physical base address
movne \rx, #0xf0000000 @ virtual base
addne \rx, \rx, #0x16000000 >> 4
.endm
.macro senduart,rd,rx
strb \rd, [\rx, #UART01x_DR]
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #0x18] @ UARTFLG
tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full
bne 1001b
.endm
.macro busyuart,rd,rx
1001: ldr \rd, [\rx, #0x18] @ UARTFLG
tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy
bne 1001b
.endm
#elif defined(CONFIG_ARCH_CLPS711X)
#include <asm/hardware/clps7111.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #CLPS7111_PHYS_BASE
movne \rx, #CLPS7111_VIRT_BASE
#ifndef CONFIG_DEBUG_CLPS711X_UART2
add \rx, \rx, #0x0000 @ UART1
#else
add \rx, \rx, #0x1000 @ UART2
#endif
.endm
.macro senduart,rd,rx
str \rd, [\rx, #0x0480] @ UARTDR
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #0x0140] @ SYSFLGx
tst \rd, #1 << 11 @ UBUSYx
bne 1001b
.endm
.macro busyuart,rd,rx
tst \rx, #0x1000 @ UART2 does not have CTS here
bne 1002f
1001: ldr \rd, [\rx, #0x0140] @ SYSFLGx
tst \rd, #1 << 8 @ CTS
bne 1001b
1002:
.endm
#elif defined(CONFIG_ARCH_CAMELOT)
#include <asm/arch/excalibur.h>
#define UART00_TYPE
#include <asm/arch/uart00.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldr \rx, =EXC_UART00_BASE @ physical base address
orrne \rx, \rx, #0xff000000 @ virtual base
orrne \rx, \rx, #0x00f00000
.endm
.macro senduart,rd,rx
str \rd, [\rx, #UART_TD(0)]
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #UART_TSR(0)]
and \rd, \rd, #UART_TSR_TX_LEVEL_MSK
cmp \rd, #15
beq 1001b
.endm
.macro busyuart,rd,rx
1001: ldr \rd, [\rx, #UART_TSR(0)]
ands \rd, \rd, #UART_TSR_TX_LEVEL_MSK
bne 1001b
.endm
#elif defined(CONFIG_ARCH_IOP3XX)
.macro addruart,rx
mov \rx, #0xfe000000 @ physical
#if defined(CONFIG_ARCH_IQ80321) || defined(CONFIG_ARCH_IQ31244)
orr \rx, \rx, #0x00800000 @ location of the UART
#elif defined(CONFIG_ARCH_IOP331)
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x000fe000 @ Physical Base
movne \rx, #0
orr \rx, \rx, #0xfe000000
orr \rx, \rx, #0x00f00000 @ Virtual Base
orr \rx, \rx, #0x00001700 @ location of the UART
#else
#error Unknown IOP3XX implementation
#endif
.endm
.macro senduart,rd,rx
strb \rd, [\rx]
.endm
.macro busyuart,rd,rx
1002: ldrb \rd, [\rx, #0x5]
and \rd, \rd, #0x60
teq \rd, #0x60
bne 1002b
.endm
.macro waituart,rd,rx
#if !defined(CONFIG_ARCH_IQ80321) || !defined(CONFIG_ARCH_IQ31244) || !defined(CONFIG_ARCH_IQ80331)
1001: ldrb \rd, [\rx, #0x6]
tst \rd, #0x10
beq 1001b
#endif
.endm
#elif defined(CONFIG_ARCH_IXP4XX)
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0xc8000000
movne \rx, #0xff000000
add \rx,\rx,#3 @ Uart regs are at off set of 3 if
@ byte writes used - Big Endian.
.endm
.macro senduart,rd,rx
strb \rd, [\rx]
.endm
.macro waituart,rd,rx
1002: ldrb \rd, [\rx, #0x14]
and \rd, \rd, #0x60 @ check THRE and TEMT bits
teq \rd, #0x60
bne 1002b
.endm
.macro busyuart,rd,rx
.endm
#elif defined(CONFIG_ARCH_IXP2000)
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0xc0000000 @ Physical base
movne \rx, #0xfe000000 @ virtual base
orrne \rx, \rx, #0x00f00000
orr \rx, \rx, #0x00030000
#ifdef __ARMEB__
orr \rx, \rx, #0x00000003
#endif
.endm
.macro senduart,rd,rx
strb \rd, [\rx]
.endm
.macro busyuart,rd,rx
1002: ldrb \rd, [\rx, #0x14]
tst \rd, #0x20
beq 1002b
.endm
.macro waituart,rd,rx
nop
nop
nop
.endm
#elif defined(CONFIG_ARCH_OMAP)
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0xff000000 @ physical base address
movne \rx, #0xfe000000 @ virtual base
orr \rx, \rx, #0x00fb0000
#ifdef CONFIG_OMAP_LL_DEBUG_UART3
orr \rx, \rx, #0x00009000 @ UART 3
#endif
#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
orr \rx, \rx, #0x00000800 @ UART 2 & 3
#endif
.endm
.macro senduart,rd,rx
strb \rd, [\rx]
.endm
.macro busyuart,rd,rx
1001: ldrb \rd, [\rx, #(0x5 << 2)] @ OMAP-1510 and friends
and \rd, \rd, #0x60
teq \rd, #0x60
beq 1002f
ldrb \rd, [\rx, #(0x5 << 0)] @ OMAP-730 only
and \rd, \rd, #0x60
teq \rd, #0x60
bne 1001b
1002:
.endm
.macro waituart,rd,rx
.endm
#elif defined(CONFIG_ARCH_S3C2410)
#include <asm/arch/map.h>
#include <asm/arch/regs-serial.h>
.macro addruart, rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C2410_PA_UART
ldrne \rx, = S3C2410_VA_UART
#if CONFIG_DEBUG_S3C2410_UART != 0
add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C2410_UART)
#endif
.endm
.macro senduart,rd,rx
str \rd, [\rx, # S3C2410_UTXH ]
.endm
.macro busyuart, rd, rx
ldr \rd, [ \rx, # S3C2410_UFCON ]
tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled?
beq 1001f @
@ FIFO enabled...
1003:
ldr \rd, [ \rx, # S3C2410_UFSTAT ]
tst \rd, #S3C2410_UFSTAT_TXFULL
bne 1003b
b 1002f
1001:
@ busy waiting for non fifo
ldr \rd, [ \rx, # S3C2410_UTRSTAT ]
tst \rd, #S3C2410_UTRSTAT_TXFE
beq 1001b
1002: @ exit busyuart
.endm
.macro waituart,rd,rx
ldr \rd, [ \rx, # S3C2410_UFCON ]
tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled?
beq 1001f @
@ FIFO enabled...
1003:
ldr \rd, [ \rx, # S3C2410_UFSTAT ]
ands \rd, \rd, #15<<S3C2410_UFSTAT_TXSHIFT
bne 1003b
b 1002f
1001:
@ idle waiting for non fifo
ldr \rd, [ \rx, # S3C2410_UTRSTAT ]
tst \rd, #S3C2410_UTRSTAT_TXFE
beq 1001b
1002: @ exit busyuart
.endm
#elif defined(CONFIG_ARCH_LH7A40X)
@ It is not known if this will be appropriate for every 40x
@ board.
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
mov \rx, #0x00000700 @ offset from base
orreq \rx, \rx, #0x80000000 @ physical base
orrne \rx, \rx, #0xf8000000 @ virtual base
.endm
.macro senduart,rd,rx
strb \rd, [\rx] @ DATA
.endm
.macro busyuart,rd,rx @ spin while busy
1001: ldr \rd, [\rx, #0x10] @ STATUS
tst \rd, #1 << 3 @ BUSY (TX FIFO not empty)
bne 1001b @ yes, spin
.endm
.macro waituart,rd,rx @ wait for Tx FIFO room
1001: ldrb \rd, [\rx, #0x10] @ STATUS
tst \rd, #1 << 5 @ TXFF (TX FIFO full)
bne 1001b @ yes, spin
.endm
#elif defined(CONFIG_ARCH_VERSATILE_PB)
#include <asm/hardware/amba_serial.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x10000000
movne \rx, #0xf1000000 @ virtual base
orr \rx, \rx, #0x001F0000
orr \rx, \rx, #0x00001000
.endm
.macro senduart,rd,rx
strb \rd, [\rx, #UART01x_DR]
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #0x18] @ UARTFLG
tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full
bne 1001b
.endm
.macro busyuart,rd,rx
1001: ldr \rd, [\rx, #0x18] @ UARTFLG
tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy
bne 1001b
.endm
#elif defined(CONFIG_ARCH_IMX)
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x00000000 @ physical
movne \rx, #0xe0000000 @ virtual
orr \rx, \rx, #0x00200000
orr \rx, \rx, #0x00006000 @ UART1 offset
.endm
.macro senduart,rd,rx
str \rd, [\rx, #0x40] @ TXDATA
.endm
.macro waituart,rd,rx
.endm
.macro busyuart,rd,rx
1002: ldr \rd, [\rx, #0x98] @ SR2
tst \rd, #1 << 3 @ TXDC
beq 1002b @ wait until transmit done
.endm
#elif defined(CONFIG_ARCH_H720X)
.equ io_virt, IO_BASE
.equ io_phys, IO_START
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #io_phys @ physical base address
movne \rx, #io_virt @ virtual address
add \rx, \rx, #0x00020000 @ UART1
.endm
.macro senduart,rd,rx
str \rd, [\rx, #0x0] @ UARTDR
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #0x18] @ UARTFLG
tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full
bne 1001b
.endm
.macro busyuart,rd,rx
1001: ldr \rd, [\rx, #0x18] @ UARTFLG
tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy
bne 1001b
.endm
#else
#error Unknown architecture
#endif
/*
* Useful debugging routines
*/
ENTRY(printhex8)
mov r1, #8
b printhex
ENTRY(printhex4)
mov r1, #4
b printhex
ENTRY(printhex2)
mov r1, #2
printhex: adr r2, hexbuf
add r3, r2, r1
mov r1, #0
strb r1, [r3]
1: and r1, r0, #15
mov r0, r0, lsr #4
cmp r1, #10
addlt r1, r1, #'0'
addge r1, r1, #'a' - 10
strb r1, [r3, #-1]!
teq r3, r2
bne 1b
mov r0, r2
b printascii
.ltorg
ENTRY(printascii)
addruart r3
b 2f
1: waituart r2, r3
senduart r1, r3
busyuart r2, r3
teq r1, #'\n'
moveq r1, #'\r'
beq 1b
2: teq r0, #0
ldrneb r1, [r0], #1
teqne r1, #0
bne 1b
mov pc, lr
ENTRY(printch)
addruart r3
mov r1, r0
mov r0, #0
b 1b
hexbuf: .space 16
![[BACK]](/icons/back.gif){kind=icon}
Return to debug.S CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [Development] / linux-2.6-xfs / arch / arm / kernel