/*
* Hardware driver for the LoCOMX card, using the generic z85230
* functions
*
* Author: Gergely Madarasz <gorgo@itc.hu>
*
* Based on skeleton code and old LoCOMX driver by Tivadar Szemethy <tiv@itc.hu>
* and the hostess_sv11 driver
*
* Contributors:
* Arnaldo Carvalho de Melo <acme@conectiva.com.br> (0.14)
*
* Copyright (C) 1999 ITConsult-Pro Co. <info@itc.hu>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Version 0.10 (99/06/17):
* - rewritten for the z85230 layer
*
* Version 0.11 (99/06/21):
* - some printk's fixed
* - get rid of a memory leak (it was impossible though :))
*
* Version 0.12 (99/07/07):
* - check CTS for modem lines, not DCD (which is always high
* in case of this board)
* Version 0.13 (99/07/08):
* - Fix the transmitter status check
* - Handle the net device statistics better
* Version 0.14 (00/08/15):
* - resource release on failure at LOCOMX_init
*/
#define VERSION "0.14"
#include <linux/module.h>
#include <linux/version.h>
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/netdevice.h>
#include <linux/proc_fs.h>
#include <asm/types.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include "comx.h"
#include "z85230.h"
MODULE_AUTHOR("Gergely Madarasz <gorgo@itc.hu>");
MODULE_DESCRIPTION("Hardware driver for the LoCOMX board");
MODULE_LICENSE("GPL");
#define RX_DMA 3
#define TX_DMA 1
#define LOCOMX_ID 0x33
#define LOCOMX_IO_EXTENT 8
#define LOCOMX_DEFAULT_IO 0x368
#define LOCOMX_DEFAULT_IRQ 7
u8 z8530_locomx[] = {
11, TCRTxCP,
14, DTRREQ,
255
};
struct locomx_data {
int io_extent;
struct z8530_dev board;
struct timer_list status_timer;
};
static int LOCOMX_txe(struct net_device *dev)
{
struct comx_channel *ch = dev->priv;
struct locomx_data *hw = ch->HW_privdata;
return (!hw->board.chanA.tx_next_skb);
}
static void locomx_rx(struct z8530_channel *c, struct sk_buff *skb)
{
struct net_device *dev=c->netdevice;
struct comx_channel *ch=dev->priv;
if (ch->debug_flags & DEBUG_HW_RX) {
comx_debug_skb(dev, skb, "locomx_rx receiving");
}
ch->LINE_rx(dev,skb);
}
static int LOCOMX_send_packet(struct net_device *dev, struct sk_buff *skb)
{
struct comx_channel *ch = (struct comx_channel *)dev->priv;
struct locomx_data *hw = ch->HW_privdata;
if (ch->debug_flags & DEBUG_HW_TX) {
comx_debug_bytes(dev, skb->data, skb->len, "LOCOMX_send_packet");
}
if (!(ch->line_status & LINE_UP)) {
return FRAME_DROPPED;
}
if(z8530_queue_xmit(&hw->board.chanA,skb)) {
printk(KERN_WARNING "%s: FRAME_DROPPED\n",dev->name);
return FRAME_DROPPED;
}
if (ch->debug_flags & DEBUG_HW_TX) {
comx_debug(dev, "%s: LOCOMX_send_packet was successful\n\n", dev->name);
}
if(!hw->board.chanA.tx_next_skb) {
return FRAME_QUEUED;
} else {
return FRAME_ACCEPTED;
}
}
static void locomx_status_timerfun(unsigned long d)
{
struct net_device *dev=(struct net_device *)d;
struct comx_channel *ch=dev->priv;
struct locomx_data *hw=ch->HW_privdata;
if(!(ch->line_status & LINE_UP) &&
(hw->board.chanA.status & CTS)) {
ch->LINE_status(dev, ch->line_status | LINE_UP);
}
if((ch->line_status & LINE_UP) &&
!(hw->board.chanA.status & CTS)) {
ch->LINE_status(dev, ch->line_status & ~LINE_UP);
}
mod_timer(&hw->status_timer,jiffies + ch->lineup_delay * HZ);
}
static int LOCOMX_open(struct net_device *dev)
{
struct comx_channel *ch = dev->priv;
struct locomx_data *hw = ch->HW_privdata;
struct proc_dir_entry *procfile = ch->procdir->subdir;
unsigned long flags;
int ret;
if (!dev->base_addr || !dev->irq) {
return -ENODEV;
}
if (!request_region(dev->base_addr, hw->io_extent, dev->name)) {
return -EAGAIN;
}
hw->board.chanA.ctrlio=dev->base_addr + 5;
hw->board.chanA.dataio=dev->base_addr + 7;
hw->board.irq=dev->irq;
hw->board.chanA.netdevice=dev;
hw->board.chanA.dev=&hw->board;
hw->board.name=dev->name;
hw->board.chanA.txdma=TX_DMA;
hw->board.chanA.rxdma=RX_DMA;
hw->board.chanA.irqs=&z8530_nop;
hw->board.chanB.irqs=&z8530_nop;
if(request_irq(dev->irq, z8530_interrupt, SA_INTERRUPT,
dev->name, &hw->board)) {
printk(KERN_ERR "%s: unable to obtain irq %d\n", dev->name,
dev->irq);
ret=-EAGAIN;
goto irq_fail;
}
if(request_dma(TX_DMA,"LoCOMX (TX)")) {
printk(KERN_ERR "%s: unable to obtain TX DMA (DMA channel %d)\n",
dev->name, TX_DMA);
ret=-EAGAIN;
goto dma1_fail;
}
if(request_dma(RX_DMA,"LoCOMX (RX)")) {
printk(KERN_ERR "%s: unable to obtain RX DMA (DMA channel %d)\n",
dev->name, RX_DMA);
ret=-EAGAIN;
goto dma2_fail;
}
save_flags(flags);
cli();
if(z8530_init(&hw->board)!=0)
{
printk(KERN_ERR "%s: Z8530 device not found.\n",dev->name);
ret=-ENODEV;
goto z8530_fail;
}
hw->board.chanA.dcdcheck=CTS;
z8530_channel_load(&hw->board.chanA, z8530_hdlc_kilostream_85230);
z8530_channel_load(&hw->board.chanA, z8530_locomx);
z8530_channel_load(&hw->board.chanB, z8530_dead_port);
z8530_describe(&hw->board, "I/O", dev->base_addr);
if((ret=z8530_sync_dma_open(dev, &hw->board.chanA))!=0) {
goto z8530_fail;
}
restore_flags(flags);
hw->board.active=1;
hw->board.chanA.rx_function=locomx_rx;
ch->init_status |= HW_OPEN;
if (hw->board.chanA.status & DCD) {
ch->line_status |= LINE_UP;
} else {
ch->line_status &= ~LINE_UP;
}
comx_status(dev, ch->line_status);
init_timer(&hw->status_timer);
hw->status_timer.function=locomx_status_timerfun;
hw->status_timer.data=(unsigned long)dev;
hw->status_timer.expires=jiffies + ch->lineup_delay * HZ;
add_timer(&hw->status_timer);
for (; procfile ; procfile = procfile->next) {
if (strcmp(procfile->name, FILENAME_IO) == 0 ||
strcmp(procfile->name, FILENAME_IRQ) == 0) {
procfile->mode = S_IFREG | 0444;
}
}
return 0;
z8530_fail:
restore_flags(flags);
free_dma(RX_DMA);
dma2_fail:
free_dma(TX_DMA);
dma1_fail:
free_irq(dev->irq, &hw->board);
irq_fail:
release_region(dev->base_addr, hw->io_extent);
return ret;
}
static int LOCOMX_close(struct net_device *dev)
{
struct comx_channel *ch = dev->priv;
struct locomx_data *hw = ch->HW_privdata;
struct proc_dir_entry *procfile = ch->procdir->subdir;
hw->board.chanA.rx_function=z8530_null_rx;
netif_stop_queue(dev);
z8530_sync_dma_close(dev, &hw->board.chanA);
z8530_shutdown(&hw->board);
del_timer(&hw->status_timer);
free_dma(RX_DMA);
free_dma(TX_DMA);
free_irq(dev->irq,&hw->board);
release_region(dev->base_addr,8);
for (; procfile ; procfile = procfile->next) {
if (strcmp(procfile->name, FILENAME_IO) == 0 ||
strcmp(procfile->name, FILENAME_IRQ) == 0) {
procfile->mode = S_IFREG | 0644;
}
}
ch->init_status &= ~HW_OPEN;
return 0;
}
static int LOCOMX_statistics(struct net_device *dev,char *page)
{
int len = 0;
len += sprintf(page + len, "Hello\n");
return len;
}
static int LOCOMX_dump(struct net_device *dev) {
printk(KERN_INFO "LOCOMX_dump called\n");
return(-1);
}
static int locomx_read_proc(char *page, char **start, off_t off, int count,
int *eof, void *data)
{
struct proc_dir_entry *file = (struct proc_dir_entry *)data;
struct net_device *dev = file->parent->data;
int len = 0;
if (strcmp(file->name, FILENAME_IO) == 0) {
len = sprintf(page, "0x%x\n", (unsigned int)dev->base_addr);
} else if (strcmp(file->name, FILENAME_IRQ) == 0) {
len = sprintf(page, "%d\n", (unsigned int)dev->irq);
} else {
printk(KERN_ERR "hw_read_proc: internal error, filename %s\n",
file->name);
return -EBADF;
}
if (off >= len) {
*eof = 1;
return 0;
}
*start = page + off;
if (count >= len - off) {
*eof = 1;
}
return min_t(int, count, len - off);
}
static int locomx_write_proc(struct file *file, const char *buffer,
u_long count, void *data)
{
struct proc_dir_entry *entry = (struct proc_dir_entry *)data;
struct net_device *dev = (struct net_device *)entry->parent->data;
int val;
char *page;
if (!(page = (char *)__get_free_page(GFP_KERNEL))) {
return -ENOMEM;
}
copy_from_user(page, buffer, count = min_t(unsigned long, count, PAGE_SIZE));
if (*(page + count - 1) == '\n') {
*(page + count - 1) = 0;
}
if (strcmp(entry->name, FILENAME_IO) == 0) {
val = simple_strtoul(page, NULL, 0);
if (val != 0x360 && val != 0x368 && val != 0x370 &&
val != 0x378) {
printk(KERN_ERR "LoCOMX: incorrect io address!\n");
} else {
dev->base_addr = val;
}
} else if (strcmp(entry->name, FILENAME_IRQ) == 0) {
val = simple_strtoul(page, NULL, 0);
if (val != 3 && val != 4 && val != 5 && val != 6 && val != 7) {
printk(KERN_ERR "LoCOMX: incorrect irq value!\n");
} else {
dev->irq = val;
}
} else {
printk(KERN_ERR "locomx_write_proc: internal error, filename %s\n",
entry->name);
free_page((unsigned long)page);
return -EBADF;
}
free_page((unsigned long)page);
return count;
}
static int LOCOMX_init(struct net_device *dev)
{
struct comx_channel *ch = (struct comx_channel *)dev->priv;
struct locomx_data *hw;
struct proc_dir_entry *new_file;
/* Alloc data for private structure */
if ((ch->HW_privdata = kmalloc(sizeof(struct locomx_data),
GFP_KERNEL)) == NULL) {
return -ENOMEM;
}
memset(hw = ch->HW_privdata, 0, sizeof(struct locomx_data));
hw->io_extent = LOCOMX_IO_EXTENT;
/* Register /proc files */
if ((new_file = create_proc_entry(FILENAME_IO, S_IFREG | 0644,
ch->procdir)) == NULL) {
goto cleanup_HW_privdata;
}
new_file->data = (void *)new_file;
new_file->read_proc = &locomx_read_proc;
new_file->write_proc = &locomx_write_proc;
new_file->nlink = 1;
if ((new_file = create_proc_entry(FILENAME_IRQ, S_IFREG | 0644,
ch->procdir)) == NULL) {
goto cleanup_filename_io;
}
new_file->data = (void *)new_file;
new_file->read_proc = &locomx_read_proc;
new_file->write_proc = &locomx_write_proc;
new_file->nlink = 1;
/* No clock yet */
/*
if ((new_file = create_proc_entry(FILENAME_CLOCK, S_IFREG | 0644,
ch->procdir)) == NULL) {
return -EIO;
}
new_file->data = (void *)new_file;
new_file->read_proc = &locomx_read_proc;
new_file->write_proc = &locomx_write_proc;
new_file->nlink = 1;
*/
ch->HW_access_board = NULL;
ch->HW_release_board = NULL;
ch->HW_txe = LOCOMX_txe;
ch->HW_open = LOCOMX_open;
ch->HW_close = LOCOMX_close;
ch->HW_send_packet = LOCOMX_send_packet;
ch->HW_statistics = LOCOMX_statistics;
ch->HW_set_clock = NULL;
ch->current_stats = &hw->board.chanA.stats;
memcpy(ch->current_stats, &ch->stats, sizeof(struct net_device_stats));
dev->base_addr = LOCOMX_DEFAULT_IO;
dev->irq = LOCOMX_DEFAULT_IRQ;
/* O.K. Count one more user on this module */
MOD_INC_USE_COUNT;
return 0;
cleanup_filename_io:
remove_proc_entry(FILENAME_IO, ch->procdir);
cleanup_HW_privdata:
kfree(ch->HW_privdata);
return -EIO;
}
static int LOCOMX_exit(struct net_device *dev)
{
struct comx_channel *ch = (struct comx_channel *)dev->priv;
ch->HW_access_board = NULL;
ch->HW_release_board = NULL;
ch->HW_txe = NULL;
ch->HW_open = NULL;
ch->HW_close = NULL;
ch->HW_send_packet = NULL;
ch->HW_statistics = NULL;
ch->HW_set_clock = NULL;
memcpy(&ch->stats, ch->current_stats, sizeof(struct net_device_stats));
ch->current_stats = &ch->stats;
kfree(ch->HW_privdata);
remove_proc_entry(FILENAME_IO, ch->procdir);
remove_proc_entry(FILENAME_IRQ, ch->procdir);
// remove_proc_entry(FILENAME_CLOCK, ch->procdir);
MOD_DEC_USE_COUNT;
return 0;
}
static struct comx_hardware locomx_hw = {
"locomx",
VERSION,
LOCOMX_init,
LOCOMX_exit,
LOCOMX_dump,
NULL
};
#ifdef MODULE
#define comx_hw_locomx_init init_module
#endif
int __init comx_hw_locomx_init(void)
{
comx_register_hardware(&locomx_hw);
return 0;
}
#ifdef MODULE
void cleanup_module(void)
{
comx_unregister_hardware("locomx");
return;
}
#endif