/*
* ibm_ocp_debug.c
*
* This has all the debug routines that where in *_enet.c
*
* Armin Kuster akuster@mvista.com
* April , 2002
*
* Copyright 2002 MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* TODO:
*
* Version 1.0: (04/15/02)
* initial release
* These are all the debug routines from *_enet.c and a few new ones.
* this was done to reduce the *_enet.c code.
*
* Version 1.1: 04/24/02
* fixed missind EMAC_DEV macros - Todd
*
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <asm/io.h>
#include "ibm_ocp_mal.h"
#include "ibm_ocp_zmii.h"
#include "ibm_ocp_enet.h"
extern int
emac_phy_read(struct net_device *dev, int mii_id, int reg);
void emac_phy_dump(struct net_device *dev)
{
struct ocp_enet_private *fep = dev->priv;
unsigned long i;
uint data;
printk(KERN_DEBUG " Prepare for Phy dump....\n");
for (i = 0; i < 0x1A; i++) {
data = emac_phy_read(dev, fep->mii_phy_addr, i);
printk(KERN_DEBUG "Phy reg 0x%lx ==> %4x\n", i, data);
if (i == 0x07)
i = 0x0f;
}
}
void
emac_desc_dump(struct net_device *dev)
{
struct ocp_enet_private *fep = dev->priv;
int curr_slot;
printk(KERN_DEBUG "dumping the receive descriptors: current slot is %d\n",
fep->rx_slot);
for (curr_slot = 0; curr_slot < NUM_RX_BUFF; curr_slot++) {
printk(KERN_DEBUG "Desc %02d: status 0x%04x, length %3d, addr 0x%x\n",
curr_slot,
fep->rx_desc[curr_slot].ctrl,
fep->rx_desc[curr_slot].data_len,
(unsigned int) fep->rx_desc[curr_slot].data_ptr);
}
}
void
emac_mac_dump(struct net_device *dev)
{
struct ocp_enet_private *fep = dev->priv;
volatile emac_t *emacp = fep->emacp;
printk(KERN_DEBUG "EMAC DEBUG ********** \n");
printk(KERN_DEBUG "EMAC_M0 ==> 0x%x\n", in_be32(&emacp->em0mr0));
printk(KERN_DEBUG "EMAC_M1 ==> 0x%x\n", in_be32(&emacp->em0mr1));
printk(KERN_DEBUG "EMAC_TXM0==> 0x%x\n", in_be32(&emacp->em0tmr0));
printk(KERN_DEBUG "EMAC_TXM1==> 0x%x\n", in_be32(&emacp->em0tmr1));
printk(KERN_DEBUG "EMAC_RXM ==> 0x%x\n", in_be32(&emacp->em0rmr));
printk(KERN_DEBUG "EMAC_ISR ==> 0x%x\n", in_be32(&emacp->em0isr));
printk(KERN_DEBUG "EMAC_IER ==> 0x%x\n", in_be32(&emacp->em0iser));
printk(KERN_DEBUG "EMAC_IAH ==> 0x%x\n", in_be32(&emacp->em0iahr));
printk(KERN_DEBUG "EMAC_IAL ==> 0x%x\n", in_be32(&emacp->em0ialr));
printk(KERN_DEBUG "EMAC_VLAN_TPID_REG ==> 0x%x\n", in_be32(&emacp->em0vtpid));
}
void
emac_mal_dump(struct net_device *dev)
{
struct ibm_ocp_mal* mal = ((struct ocp_enet_private*)dev->priv)->mal;
printk(KERN_DEBUG " MAL DEBUG ********** \n");
printk(KERN_DEBUG " MCR ==> 0x%x\n",
(unsigned int) get_mal_dcrn(mal, DCRN_MALCR));
printk(KERN_DEBUG " ESR ==> 0x%x\n",
(unsigned int) get_mal_dcrn(mal, DCRN_MALESR));
printk(KERN_DEBUG " IER ==> 0x%x\n",
(unsigned int) get_mal_dcrn(mal, DCRN_MALIER));
#ifdef CONFIG_40x
printk(KERN_DEBUG " DBR ==> 0x%x\n",
(unsigned int) get_mal_dcrn(mal, DCRN_MALDBR));
#endif /* CONFIG_40x */
printk(KERN_DEBUG " TXCASR ==> 0x%x\n",
(unsigned int) get_mal_dcrn(mal, DCRN_MALTXCASR));
printk(KERN_DEBUG " TXCARR ==> 0x%x\n",
(unsigned int) get_mal_dcrn(mal, DCRN_MALTXCARR));
printk(KERN_DEBUG " TXEOBISR ==> 0x%x\n",
(unsigned int) get_mal_dcrn(mal, DCRN_MALTXEOBISR));
printk(KERN_DEBUG " TXDEIR ==> 0x%x\n",
(unsigned int) get_mal_dcrn(mal, DCRN_MALTXDEIR));
printk(KERN_DEBUG " RXCASR ==> 0x%x\n",
(unsigned int) get_mal_dcrn(mal, DCRN_MALRXCASR));
printk(KERN_DEBUG " RXCARR ==> 0x%x\n",
(unsigned int) get_mal_dcrn(mal, DCRN_MALRXCARR));
printk(KERN_DEBUG " RXEOBISR ==> 0x%x\n",
(unsigned int) get_mal_dcrn(mal, DCRN_MALRXEOBISR));
printk(KERN_DEBUG " RXDEIR ==> 0x%x\n",
(unsigned int) get_mal_dcrn(mal, DCRN_MALRXDEIR));
printk(KERN_DEBUG " TXCTP0R ==> 0x%x\n",
(unsigned int) get_mal_dcrn(mal, DCRN_MALTXCTP0R));
printk(KERN_DEBUG " TXCTP1R ==> 0x%x\n",
(unsigned int) get_mal_dcrn(mal, DCRN_MALTXCTP1R));
printk(KERN_DEBUG " TXCTP2R ==> 0x%x\n",
(unsigned int) get_mal_dcrn(mal, DCRN_MALTXCTP2R));
printk(KERN_DEBUG " TXCTP3R ==> 0x%x\n",
(unsigned int) get_mal_dcrn(mal, DCRN_MALTXCTP3R));
printk(KERN_DEBUG " RXCTP0R ==> 0x%x\n",
(unsigned int) get_mal_dcrn(mal, DCRN_MALRXCTP0R));
printk(KERN_DEBUG " RXCTP1R ==> 0x%x\n",
(unsigned int) get_mal_dcrn(mal, DCRN_MALRXCTP1R));
printk(KERN_DEBUG " RCBS0 ==> 0x%x\n",
(unsigned int) get_mal_dcrn(mal, DCRN_MALRCBS0));
printk(KERN_DEBUG " RCBS1 ==> 0x%x\n",
(unsigned int) get_mal_dcrn(mal, DCRN_MALRCBS1));
}
void
emac_serr_dump_0(struct net_device *dev)
{
struct ibm_ocp_mal* mal = ((struct ocp_enet_private*)dev->priv)->mal;
unsigned long int mal_error, plb_error, plb_addr;
mal_error = get_mal_dcrn(mal, DCRN_MALESR);
printk(KERN_DEBUG "ppc405_eth_serr: %s channel %ld \n",
(mal_error & 0x40000000) ? "Receive" :
"Transmit", (mal_error & 0x3e000000) >> 25);
printk(KERN_DEBUG " ----- latched error -----\n");
if (mal_error & MALESR_DE)
printk(KERN_DEBUG " DE: descriptor error\n");
if (mal_error & MALESR_OEN)
printk(KERN_DEBUG
" ONE: OPB non-fullword error\n");
if (mal_error & MALESR_OTE)
printk(KERN_DEBUG " OTE: OPB timeout error\n");
if (mal_error & MALESR_OSE)
printk(KERN_DEBUG " OSE: OPB slave error\n");
if (mal_error & MALESR_PEIN) {
plb_error = mfdcr(DCRN_PLB0_BESR);
printk(KERN_DEBUG
" PEIN: PLB error, PLB0_BESR is 0x%x\n",
(unsigned int) plb_error);
plb_addr = mfdcr(DCRN_PLB0_BEAR);
printk(KERN_DEBUG
" PEIN: PLB error, PLB0_BEAR is 0x%x\n",
(unsigned int) plb_addr);
}
}
void
emac_serr_dump_1(struct net_device *dev)
{
struct ibm_ocp_mal* mal = ((struct ocp_enet_private*)dev->priv)->mal;
int mal_error = get_mal_dcrn(mal, DCRN_MALESR);
printk(KERN_DEBUG " ----- cumulative errors -----\n");
if (mal_error & MALESR_DEI)
printk(KERN_DEBUG
" DEI: descriptor error interrupt\n");
if (mal_error & MALESR_ONEI)
printk(KERN_DEBUG
" OPB non-fullword error interrupt\n");
if (mal_error & MALESR_OTEI)
printk(KERN_DEBUG
" OTEI: timeout error interrupt\n");
if (mal_error & MALESR_OSEI)
printk(KERN_DEBUG
" OSEI: slave error interrupt\n");
if (mal_error & MALESR_PBEI)
printk(KERN_DEBUG
" PBEI: PLB bus error interrupt\n");
}
void
emac_err_dump(struct net_device *dev, int em0isr)
{
printk(KERN_DEBUG "%s: on-chip ethernet error:\n", dev->name);
if (em0isr & EMAC_ISR_OVR)
printk(KERN_DEBUG " OVR: overrun\n");
if (em0isr & EMAC_ISR_PP)
printk(KERN_DEBUG " PP: control pause packet\n");
if (em0isr & EMAC_ISR_BP)
printk(KERN_DEBUG " BP: packet error\n");
if (em0isr & EMAC_ISR_RP)
printk(KERN_DEBUG " RP: runt packet\n");
if (em0isr & EMAC_ISR_SE)
printk(KERN_DEBUG " SE: short event\n");
if (em0isr & EMAC_ISR_ALE)
printk(KERN_DEBUG
" ALE: odd number of nibbles in packet\n");
if (em0isr & EMAC_ISR_BFCS)
printk(KERN_DEBUG " BFCS: bad FCS\n");
if (em0isr & EMAC_ISR_PTLE)
printk(KERN_DEBUG " PTLE: oversized packet\n");
if (em0isr & EMAC_ISR_ORE)
printk(KERN_DEBUG
" ORE: packet length field > max allowed LLC\n");
if (em0isr & EMAC_ISR_IRE)
printk(KERN_DEBUG " IRE: In Range error\n");
if (em0isr & EMAC_ISR_DBDM)
printk(KERN_DEBUG " DBDM: xmit error or SQE\n");
if (em0isr & EMAC_ISR_DB0)
printk(KERN_DEBUG
" DB0: xmit error or SQE on TX channel 0\n");
if (em0isr & EMAC_ISR_SE0)
printk(KERN_DEBUG
" SE0: Signal Quality Error test failure from TX channel 0\n");
if (em0isr & EMAC_ISR_TE0)
printk(KERN_DEBUG " TE0: xmit channel 0 aborted\n");
if (em0isr & EMAC_ISR_DB1)
printk(KERN_DEBUG
" DB1: xmit error or SQE on TX channel \n");
if (em0isr & EMAC_ISR_SE1)
printk(KERN_DEBUG
" SE1: Signal Quality Error test failure from TX channel 1\n");
if (em0isr & EMAC_ISR_TE1)
printk(KERN_DEBUG " TE1: xmit channel 1 aborted\n");
if (em0isr & EMAC_ISR_MOS)
printk(KERN_DEBUG " MOS\n");
if (em0isr & EMAC_ISR_MOF)
printk(KERN_DEBUG " MOF\n");
emac_mac_dump(dev);
emac_mal_dump(dev);
}
![[BACK]](/icons/back.gif){kind=icon}
Return to ibm_ocp_debug.c CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [Development] / linux-2.4-xfs / drivers / net / ibm_emac