/*
* A collection of structures, addresses, and values associated with
* the RPCG RPX-Lite board. Copied from the MBX stuff.
*
* Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
*/
#ifdef __KERNEL__
#ifndef __MACH_RPX_DEFS
#define __MACH_RPX_DEFS
#include <linux/config.h>
#ifndef __ASSEMBLY__
/* A Board Information structure that is given to a program when
* prom starts it up.
*/
typedef struct bd_info {
unsigned int bi_memstart; /* Memory start address */
unsigned int bi_memsize; /* Memory (end) size in bytes */
unsigned int bi_intfreq; /* Internal Freq, in Hz */
unsigned int bi_busfreq; /* Bus Freq, in Hz */
unsigned char bi_enetaddr[6];
unsigned int bi_baudrate;
} bd_t;
extern bd_t m8xx_board_info;
/* Memory map is configured by the PROM startup.
* We just map a few things we need. The CSR is actually 4 byte-wide
* registers that can be accessed as 8-, 16-, or 32-bit values.
*/
#define RPX_CSR_ADDR ((uint)0xfa400000)
#define RPX_CSR_SIZE ((uint)(4 * 1024))
#define IMAP_ADDR ((uint)0xfa200000)
#define IMAP_SIZE ((uint)(64 * 1024))
#define PCMCIA_MEM_ADDR ((uint)0x04000000)
#define PCMCIA_MEM_SIZE ((uint)(64 * 1024))
#define PCMCIA_IO_ADDR ((uint)0x04400000)
#define PCMCIA_IO_SIZE ((uint)(4 * 1024))
/* Things of interest in the CSR.
*/
#define BCSR0_ETHEN ((uint)0x80000000)
#define BCSR0_ETHLPBK ((uint)0x40000000)
#define BCSR0_COLTESTDIS ((uint)0x20000000)
#define BCSR0_FULLDPLXDIS ((uint)0x10000000)
#define BCSR0_LEDOFF ((uint)0x08000000)
#define BCSR0_USBDISABLE ((uint)0x04000000)
#define BCSR0_USBHISPEED ((uint)0x02000000)
#define BCSR0_USBPWREN ((uint)0x01000000)
#define BCSR0_PCMCIAVOLT ((uint)0x000f0000)
#define BCSR0_PCMCIA3VOLT ((uint)0x000a0000)
#define BCSR0_PCMCIA5VOLT ((uint)0x00060000)
#define BCSR1_IPB5SEL ((uint)0x00100000)
#define BCSR1_PCVCTL4 ((uint)0x00080000)
#define BCSR1_PCVCTL5 ((uint)0x00040000)
#define BCSR1_PCVCTL6 ((uint)0x00020000)
#define BCSR1_PCVCTL7 ((uint)0x00010000)
#if defined(CONFIG_HTDMSOUND)
#include <platforms/rpxhiox.h>
#endif
#endif /* !__ASSEMBLY__ */
/* define IO_BASE for pcmcia */
#define _IO_BASE 0x80000000
#define _IO_BASE_SIZE 0x1000
#ifdef CONFIG_IDE
#define MAX_HWIFS 1
#define ide_request_irq(irq,hand,flg,dev,id) request_8xxirq((irq),(hand),(flg),(dev),(id))
#endif
/* We don't use the 8259.
*/
#define NR_8259_INTS 0
#endif
#endif /* __KERNEL__ */