Return to r4k_switch.S CVS log

Up to [Development] / linux-2.4-xfs / arch / mips64 / kernel

Initial Import 2.4.24pre2

/*
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (C) 1994, 1995, 1996, 1998, 1999 by Ralf Baechle
 * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
 * Copyright (C) 1994, 1995, 1996, by Andreas Busse
 * Copyright (C) 1999 Silicon Graphics, Inc.
 */
#include <asm/asm.h>
#include <asm/cachectl.h>
#include <asm/fpregdef.h>
#include <asm/mipsregs.h>
#include <asm/offset.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/regdef.h>
#include <asm/stackframe.h>

#include <asm/asmmacro.h>

	.set	mips3

#define PF_USEDFPU      0x00100000      /* task used FPU this quantum (SMP) */
#define ST_OFF (KERNEL_STACK_SIZE - 32 - PT_SIZE + PT_STATUS)

/*
 * [jsun] FPU context is saved if and only if the process has used FPU in 
 * the current run (PF_USEDFPU).  In any case, the CU1 bit for user space 
 * STATUS register should be 0, so that a process *always* starts its 
 * userland with FPU disabled after each context switch.
 *
 * FPU will be enabled as soon as the process accesses FPU again, through
 * do_cpu() trap.
 */

/*
 * task_struct *resume(task_struct *prev, task_struct *next)
 */
	.set	noreorder
	.align	5
	LEAF(resume)
	mfc0	t1, CP0_STATUS
	sd	t1, THREAD_STATUS(a0)
	cpu_save_nonscratch a0
	sd	ra, THREAD_REG31(a0)

	/*
	 * check if we need to save FPU registers
	 */
	ld	t0, TASK_FLAGS(a0)
	li	t1, PF_USEDFPU
	and	t2, t0, t1
	beqz	t2, 1f
	nor	t1, zero, t1

	/*
	 * clear PF_USEDFPU bit in task flags
	 */
	and	t0, t0, t1
	sd	t0, TASK_FLAGS(a0)

	/*
	 * clear saved user stack CU1 bit
	 */
	ld	t0, ST_OFF(a0)
	li	t1, ~ST0_CU1
	and	t0, t0, t1
	sd	t0, ST_OFF(a0)

	
	sll	t2, t0, 5
	bgez	t2, 2f
	sdc1	$f0, (THREAD_FPU + 0x00)(a0)
        fpu_save_16odd a0
2:
        fpu_save_16even a0 t1                   # clobbers t1
1:

	/*
	 * The order of restoring the registers takes care of the race
	 * updating $28, $29 and kernelsp without disabling ints.
	 */
	move	$28, a1
	cpu_restore_nonscratch $28

	daddiu	a1, $28, KERNEL_STACK_SIZE-32
	set_saved_sp	a1, t0, t1

	mfc0	t1, CP0_STATUS		/* Do we really need this? */
	li	a3, 0xff00
	and	t1, a3
	ld	a2, THREAD_STATUS($28)
	nor	a3, $0, a3
	and	a2, a3
	or	a2, t1
	mtc0	a2, CP0_STATUS
	jr	ra
	 move	v0, a0
	END(resume)

/*
 * Save a thread's fp context.
 */
	.set	noreorder
LEAF(_save_fp)
	mfc0	t0, CP0_STATUS
	sll	t1, t0, 5
	bgez	t1, 1f				# 16 register mode?
	 nop
	fpu_save_16odd a0
1:
	fpu_save_16even a0 t1			# clobbers t1
	jr	ra
	 sdc1	$f0, (THREAD_FPU + 0x00)(a0)
	END(_save_fp)

/*
 * Restore a thread's fp context.
 */
LEAF(_restore_fp)
	mfc0	t0, CP0_STATUS
	sll	t1, t0, 5
	bgez	t1, 1f				# 16 register mode?
	 nop

	fpu_restore_16odd a0
1:
	fpu_restore_16even a0, t0		# clobbers t0

	jr	ra
	 ldc1	$f0, (THREAD_FPU + 0x00)(a0)
	END(_restore_fp)

/*
 * Load the FPU with signalling NANS.  This bit pattern we're using has
 * the property that no matter whether considered as single or as double
 * precision represents signaling NANS.
 *
 * We initialize fcr31 to rounding to nearest, no exceptions.
 */

#define FPU_DEFAULT  0x00000000

LEAF(_init_fpu)
	mfc0	t0, CP0_STATUS
	li	t1, ST0_CU1
	or	t0, t1
	mtc0	t0, CP0_STATUS
	FPU_ENABLE_HAZARD
	sll	t0, t0, 5

	li	t1, FPU_DEFAULT
	ctc1	t1, fcr31

	bgez	t0, 1f				# 16 / 32 register mode?
	 li	t0, -1

	dmtc1	t0, $f1
	dmtc1	t0, $f3
	dmtc1	t0, $f5
	dmtc1	t0, $f7
	dmtc1	t0, $f9
	dmtc1	t0, $f11
	dmtc1	t0, $f13
	dmtc1	t0, $f15
	dmtc1	t0, $f17
	dmtc1	t0, $f19
	dmtc1	t0, $f21
	dmtc1	t0, $f23
	dmtc1	t0, $f25
	dmtc1	t0, $f27
	dmtc1	t0, $f29
	dmtc1	t0, $f31

1:	dmtc1	t0, $f0
	dmtc1	t0, $f2
	dmtc1	t0, $f4
	dmtc1	t0, $f6
	dmtc1	t0, $f8
	dmtc1	t0, $f10
	dmtc1	t0, $f12
	dmtc1	t0, $f14
	dmtc1	t0, $f16
	dmtc1	t0, $f18
	dmtc1	t0, $f20
	dmtc1	t0, $f22
	dmtc1	t0, $f24
	dmtc1	t0, $f26
	dmtc1	t0, $f28
	jr	ra
	 dmtc1	t0, $f30
	END(_init_fpu)