/*
* Copyright 2002 Momentum Computer
* Author: Matthew Dharm <mdharm@momenco.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/version.h>
#include <asm/pci.h>
#include <asm/io.h>
#include "gt64240.h"
#include <linux/init.h>
#define SELF 0
#define MASTER_ABORT_BIT 0x100
/*
* These functions and structures provide the BIOS scan and mapping of the PCI
* devices.
*/
#define MAX_PCI_DEVS 10
void gt64240_board_pcibios_fixup_bus(struct pci_bus* c);
/* Functions to implement "pci ops" */
static int galileo_pcibios_read_config_word(struct pci_dev *dev,
int offset, u16 * val);
static int galileo_pcibios_read_config_byte(struct pci_dev *dev,
int offset, u8 * val);
static int galileo_pcibios_read_config_dword(struct pci_dev *dev,
int offset, u32 * val);
static int galileo_pcibios_write_config_byte(struct pci_dev *dev,
int offset, u8 val);
static int galileo_pcibios_write_config_word(struct pci_dev *dev,
int offset, u16 val);
static int galileo_pcibios_write_config_dword(struct pci_dev *dev,
int offset, u32 val);
/*
* General-purpose PCI functions.
*/
/*
* pci_range_ck -
*
* Check if the pci device that are trying to access does really exists
* on the evaluation board.
*
* Inputs :
* bus - bus number (0 for PCI 0 ; 1 for PCI 1)
* dev - number of device on the specific pci bus
*
* Outpus :
* 0 - if OK , 1 - if failure
*/
static __inline__ int pci_range_ck(unsigned char bus, unsigned char dev)
{
/* Accessing device 31 crashes the GT-64240. */
if (dev < 5)
return 0;
return -1;
}
/*
* galileo_pcibios_(read/write)_config_(dword/word/byte) -
*
* reads/write a dword/word/byte register from the configuration space
* of a device.
*
* Note that bus 0 and bus 1 are local, and we assume all other busses are
* bridged from bus 1. This is a safe assumption, since any other
* configuration will require major modifications to the CP7000G
*
* Inputs :
* bus - bus number
* dev - device number
* offset - register offset in the configuration space
* val - value to be written / read
*
* Outputs :
* PCIBIOS_SUCCESSFUL when operation was succesfull
* PCIBIOS_DEVICE_NOT_FOUND when the bus or dev is errorneous
* PCIBIOS_BAD_REGISTER_NUMBER when accessing non aligned
*/
static int galileo_pcibios_read_config_dword(struct pci_dev *device,
int offset, u32* val)
{
int dev, bus, func;
uint32_t address_reg, data_reg;
uint32_t address;
bus = device->bus->number;
dev = PCI_SLOT(device->devfn);
func = PCI_FUNC(device->devfn);
/* verify the range */
if (pci_range_ck(bus, dev))
return PCIBIOS_DEVICE_NOT_FOUND;
/* select the GT-64240 registers to communicate with the PCI bus */
if (bus == 0) {
address_reg = PCI_0CONFIGURATION_ADDRESS;
data_reg = PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER;
GT_WRITE(PCI_0ERROR_CAUSE, ~MASTER_ABORT_BIT);
} else {
address_reg = PCI_1CONFIGURATION_ADDRESS;
data_reg = PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER;
GT_WRITE(PCI_1ERROR_CAUSE, ~MASTER_ABORT_BIT);
if (bus == 1)
bus = 0;
}
address = (bus << 16) | (dev << 11) | (func << 8) |
(offset & 0xfc) | 0x80000000;
/* start the configuration cycle */
GT_WRITE(address_reg, address);
/* read the data */
GT_READ(data_reg, val);
return PCIBIOS_SUCCESSFUL;
}
static int galileo_pcibios_read_config_word(struct pci_dev *device,
int offset, u16* val)
{
int dev, bus, func;
uint32_t address_reg, data_reg;
uint32_t address;
bus = device->bus->number;
dev = PCI_SLOT(device->devfn);
func = PCI_FUNC(device->devfn);
/* verify the range */
if (pci_range_ck(bus, dev))
return PCIBIOS_DEVICE_NOT_FOUND;
/* select the GT-64240 registers to communicate with the PCI bus */
if (bus == 0) {
address_reg = PCI_0CONFIGURATION_ADDRESS;
data_reg = PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER;
GT_WRITE(PCI_0ERROR_CAUSE, ~MASTER_ABORT_BIT);
} else {
address_reg = PCI_1CONFIGURATION_ADDRESS;
data_reg = PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER;
GT_WRITE(PCI_1ERROR_CAUSE, ~MASTER_ABORT_BIT);
if (bus == 1)
bus = 0;
}
address = (bus << 16) | (dev << 11) | (func << 8) |
(offset & 0xfc) | 0x80000000;
/* start the configuration cycle */
GT_WRITE(address_reg, address);
/* read the data */
GT_READ_16(data_reg + (offset & 0x3), val);
return PCIBIOS_SUCCESSFUL;
}
static int galileo_pcibios_read_config_byte(struct pci_dev *device,
int offset, u8* val)
{
int dev, bus, func;
uint32_t address_reg, data_reg;
uint32_t address;
bus = device->bus->number;
dev = PCI_SLOT(device->devfn);
func = PCI_FUNC(device->devfn);
/* verify the range */
if (pci_range_ck(bus, dev))
return PCIBIOS_DEVICE_NOT_FOUND;
/* select the GT-64240 registers to communicate with the PCI bus */
if (bus == 0) {
address_reg = PCI_0CONFIGURATION_ADDRESS;
data_reg = PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER;
} else {
address_reg = PCI_1CONFIGURATION_ADDRESS;
data_reg = PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER;
if (bus == 1)
bus = 0;
}
address = (bus << 16) | (dev << 11) | (func << 8) |
(offset & 0xfc) | 0x80000000;
/* start the configuration cycle */
GT_WRITE(address_reg, address);
/* write the data */
GT_READ_8(data_reg + (offset & 0x3), val);
return PCIBIOS_SUCCESSFUL;
}
static int galileo_pcibios_write_config_dword(struct pci_dev *device,
int offset, u32 val)
{
int dev, bus, func;
uint32_t address_reg, data_reg;
uint32_t address;
bus = device->bus->number;
dev = PCI_SLOT(device->devfn);
func = PCI_FUNC(device->devfn);
/* verify the range */
if (pci_range_ck(bus, dev))
return PCIBIOS_DEVICE_NOT_FOUND;
/* select the GT-64240 registers to communicate with the PCI bus */
if (bus == 0) {
address_reg = PCI_0CONFIGURATION_ADDRESS;
data_reg = PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER;
} else {
address_reg = PCI_1CONFIGURATION_ADDRESS;
data_reg = PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER;
if (bus == 1)
bus = 0;
}
address = (bus << 16) | (dev << 11) | (func << 8) |
(offset & 0xfc) | 0x80000000;
/* start the configuration cycle */
GT_WRITE(address_reg, address);
/* write the data */
GT_WRITE(data_reg, val);
return PCIBIOS_SUCCESSFUL;
}
static int galileo_pcibios_write_config_word(struct pci_dev *device,
int offset, u16 val)
{
int dev, bus, func;
uint32_t address_reg, data_reg;
uint32_t address;
bus = device->bus->number;
dev = PCI_SLOT(device->devfn);
func = PCI_FUNC(device->devfn);
/* verify the range */
if (pci_range_ck(bus, dev))
return PCIBIOS_DEVICE_NOT_FOUND;
/* select the GT-64240 registers to communicate with the PCI bus */
if (bus == 0) {
address_reg = PCI_0CONFIGURATION_ADDRESS;
data_reg = PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER;
} else {
address_reg = PCI_1CONFIGURATION_ADDRESS;
data_reg = PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER;
if (bus == 1)
bus = 0;
}
address = (bus << 16) | (dev << 11) | (func << 8) |
(offset & 0xfc) | 0x80000000;
/* start the configuration cycle */
GT_WRITE(address_reg, address);
/* write the data */
GT_WRITE_16(data_reg + (offset & 0x3), val);
return PCIBIOS_SUCCESSFUL;
}
static int galileo_pcibios_write_config_byte(struct pci_dev *device,
int offset, u8 val)
{
int dev, bus, func;
uint32_t address_reg, data_reg;
uint32_t address;
bus = device->bus->number;
dev = PCI_SLOT(device->devfn);
func = PCI_FUNC(device->devfn);
/* verify the range */
if (pci_range_ck(bus, dev))
return PCIBIOS_DEVICE_NOT_FOUND;
/* select the GT-64240 registers to communicate with the PCI bus */
if (bus == 0) {
address_reg = PCI_0CONFIGURATION_ADDRESS;
data_reg = PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER;
} else {
address_reg = PCI_1CONFIGURATION_ADDRESS;
data_reg = PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER;
if (bus == 1)
bus = 0;
}
address = (bus << 16) | (dev << 11) | (func << 8) |
(offset & 0xfc) | 0x80000000;
/* start the configuration cycle */
GT_WRITE(address_reg, address);
/* write the data */
GT_WRITE_8(data_reg + (offset & 0x3), val);
return PCIBIOS_SUCCESSFUL;
}
struct pci_ops galileo_pci_ops = {
galileo_pcibios_read_config_byte,
galileo_pcibios_read_config_word,
galileo_pcibios_read_config_dword,
galileo_pcibios_write_config_byte,
galileo_pcibios_write_config_word,
galileo_pcibios_write_config_dword
};
struct pci_fixup pcibios_fixups[] = {
{0}
};
void __init pcibios_fixup_bus(struct pci_bus *c)
{
gt64240_board_pcibios_fixup_bus(c);
}
/********************************************************************
* pci0P2PConfig - This function set the PCI_0 P2P configurate.
* For more information on the P2P read PCI spec.
*
* Inputs: unsigned int SecondBusLow - Secondery PCI interface Bus Range Lower
* Boundry.
* unsigned int SecondBusHigh - Secondry PCI interface Bus Range upper
* Boundry.
* unsigned int busNum - The CPI bus number to which the PCI interface
* is connected.
* unsigned int devNum - The PCI interface's device number.
*
* Returns: true.
*/
void pci0P2PConfig(unsigned int SecondBusLow,unsigned int SecondBusHigh,
unsigned int busNum,unsigned int devNum)
{
uint32_t regData;
regData = (SecondBusLow & 0xff) | ((SecondBusHigh & 0xff) << 8) |
((busNum & 0xff) << 16) | ((devNum & 0x1f) << 24);
GT_WRITE(PCI_0P2P_CONFIGURATION, regData);
}
/********************************************************************
* pci1P2PConfig - This function set the PCI_1 P2P configurate.
* For more information on the P2P read PCI spec.
*
* Inputs: unsigned int SecondBusLow - Secondery PCI interface Bus Range Lower
* Boundry.
* unsigned int SecondBusHigh - Secondry PCI interface Bus Range upper
* Boundry.
* unsigned int busNum - The CPI bus number to which the PCI interface
* is connected.
* unsigned int devNum - The PCI interface's device number.
*
* Returns: true.
*/
void pci1P2PConfig(unsigned int SecondBusLow,unsigned int SecondBusHigh,
unsigned int busNum,unsigned int devNum)
{
uint32_t regData;
regData = (SecondBusLow & 0xff) | ((SecondBusHigh & 0xff) << 8) |
((busNum & 0xff) << 16) | ((devNum & 0x1f) << 24);
GT_WRITE(PCI_1P2P_CONFIGURATION, regData);
}
void __init pcibios_init(void)
{
/* Reset PCI I/O and PCI MEM values */
ioport_resource.start = 0xe0000000;
ioport_resource.end = 0xe0000000 + 0x20000000 - 1;
iomem_resource.start = 0xc0000000;
iomem_resource.end = 0xc0000000 + 0x20000000 - 1;
pci_scan_bus(0, &galileo_pci_ops, NULL);
pci_scan_bus(1, &galileo_pci_ops, NULL);
}
unsigned __init int pcibios_assign_all_busses(void)
{
return 1;
}
![[BACK]](/icons/back.gif){kind=icon}
Return to pci.c CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [Development] / linux-2.4-xfs / arch / mips / momentum / ocelot_g