Return to fault.c CVS log

Up to [Development] / linux-2.4-xfs / arch / mips / mm

Initial Import 2.4.24pre2

/*
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (C) 1995 - 2000 by Ralf Baechle
 */
#include <linux/config.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/ptrace.h>
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <linux/version.h>
#include <linux/vt_kern.h>

#include <asm/branch.h>
#include <asm/hardirq.h>
#include <asm/pgalloc.h>
#include <asm/mmu_context.h>
#include <asm/softirq.h>
#include <asm/system.h>
#include <asm/uaccess.h>

#define development_version (LINUX_VERSION_CODE & 0x100)

/*
 * Macro for exception fixup code to access integer registers.
 */
#define dpf_reg(r) (regs->regs[r])

extern spinlock_t timerlist_lock;

/*
 * Unlock any spinlocks which will prevent us from getting the
 * message out (timerlist_lock is acquired through the
 * console unblank code)
 */
void bust_spinlocks(int yes)
{
	spin_lock_init(&timerlist_lock);
	if (yes) {
		oops_in_progress = 1;
#ifdef CONFIG_SMP
		/* Many serial drivers do __global_cli() */
		global_irq_lock = SPIN_LOCK_UNLOCKED;
#endif
	} else {
		int loglevel_save = console_loglevel;
#ifdef CONFIG_VT
		unblank_screen();
#endif
		oops_in_progress = 0;
		/*
		 * OK, the message is on the console.  Now we call printk()
		 * without oops_in_progress set so that printk will give klogd
		 * a poke.  Hold onto your hats...
		 */
		console_loglevel = 15;		/* NMI oopser may have shut the console up */
		printk(" ");
		console_loglevel = loglevel_save;
	}
}

/*
 * This routine handles page faults.  It determines the address,
 * and the problem, and then passes it off to one of the appropriate
 * routines.
 */
asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
			      unsigned long address)
{
	struct vm_area_struct * vma;
	struct task_struct *tsk = current;
	struct mm_struct *mm = tsk->mm;
	unsigned long fixup;
	siginfo_t info;

	/*
	 * We fault-in kernel-space virtual memory on-demand. The
	 * 'reference' page table is init_mm.pgd.
	 *
	 * NOTE! We MUST NOT take any locks for this case. We may
	 * be in an interrupt or a critical region, and should
	 * only copy the information from the master page table,
	 * nothing more.
	 */
	if (address >= VMALLOC_START)
		goto vmalloc_fault;

	info.si_code = SEGV_MAPERR;
	/*
	 * If we're in an interrupt or have no user
	 * context, we must not take the fault..
	 */
	if (in_interrupt() || !mm)
		goto no_context;
#if 0
	printk("[%s:%d:%08lx:%ld:%08lx]\n", current->comm, current->pid,
	       address, write, regs->cp0_epc);
#endif
	down_read(&mm->mmap_sem);
	vma = find_vma(mm, address);
	if (!vma)
		goto bad_area;
	if (vma->vm_start <= address)
		goto good_area;
	if (!(vma->vm_flags & VM_GROWSDOWN))
		goto bad_area;
	if (expand_stack(vma, address))
		goto bad_area;
/*
 * Ok, we have a good vm_area for this memory access, so
 * we can handle it..
 */
good_area:
	info.si_code = SEGV_ACCERR;

	if (write) {
		if (!(vma->vm_flags & VM_WRITE))
			goto bad_area;
	} else {
		if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
			goto bad_area;
	}

survive:
	/*
	 * If for any reason at all we couldn't handle the fault,
	 * make sure we exit gracefully rather than endlessly redo
	 * the fault.
	 */
	switch (handle_mm_fault(mm, vma, address, write)) {
	case 1:
		tsk->min_flt++;
		break;
	case 2:
		tsk->maj_flt++;
		break;
	case 0:
		goto do_sigbus;
	default:
		goto out_of_memory;
	}

	up_read(&mm->mmap_sem);
	return;

/*
 * Something tried to access memory that isn't in our memory map..
 * Fix it, but check if it's kernel or user first..
 */
bad_area:
	up_read(&mm->mmap_sem);

	/* User mode accesses just cause a SIGSEGV */
	if (user_mode(regs)) {
		tsk->thread.cp0_badvaddr = address;
		tsk->thread.error_code = write;
#if 0
		printk("do_page_fault() #2: sending SIGSEGV to %s for illegal %s\n"
		       "%08lx (epc == %08lx, ra == %08lx)\n",
		       tsk->comm,
		       write ? "write access to" : "read access from",
		       address,
		       (unsigned long) regs->cp0_epc,
		       (unsigned long) regs->regs[31]);
#endif
		info.si_signo = SIGSEGV;
		info.si_errno = 0;
		/* info.si_code has been set above */
		info.si_addr = (void *) address;
		force_sig_info(SIGSEGV, &info, tsk);
		return;
	}

no_context:
	/* Are we prepared to handle this kernel fault?  */
	fixup = search_exception_table(exception_epc(regs));
	if (fixup) {
		long new_epc;

		tsk->thread.cp0_baduaddr = address;
		new_epc = fixup_exception(dpf_reg, fixup, regs->cp0_epc);
		if (development_version)
			printk(KERN_DEBUG "%s: Exception at [<%lx>] (%lx)\n",
			       tsk->comm, regs->cp0_epc, new_epc);
		regs->cp0_epc = new_epc;
		return;
	}

	/*
	 * Oops. The kernel tried to access some bad page. We'll have to
	 * terminate things with extreme prejudice.
	 */
	printk(KERN_ALERT "Unable to handle kernel paging request at virtual "
	       "address %08lx, epc == %08lx, ra == %08lx\n",
	       address, regs->cp0_epc, regs->regs[31]);
	die("Oops", regs);
	/* Game over.  */

/*
 * We ran out of memory, or some other thing happened to us that made
 * us unable to handle the page fault gracefully.
 */
out_of_memory:
	if (tsk->pid == 1) {
		yield();
		goto survive;
	}
	up_read(&mm->mmap_sem);
	printk(KERN_NOTICE "VM: killing process %s\n", tsk->comm);
	if (user_mode(regs))
		do_exit(SIGKILL);
	goto no_context;

do_sigbus:
	up_read(&mm->mmap_sem);

	/*
	 * Send a sigbus, regardless of whether we were in kernel
	 * or user mode.
	 */
	tsk->thread.cp0_badvaddr = address;
	info.si_signo = SIGBUS;
	info.si_errno = 0;
	info.si_code = BUS_ADRERR;
	info.si_addr = (void *) address;
	force_sig_info(SIGBUS, &info, tsk);

	/* Kernel mode? Handle exceptions or die */
	if (!user_mode(regs))
		goto no_context;

	return;

vmalloc_fault:
	{
		/*
		 * Synchronize this task's top level page-table
		 * with the 'reference' page table.
		 *
		 * Do _not_ use "tsk" here. We might be inside
		 * an interrupt in the middle of a task switch..
		 */
		int offset = __pgd_offset(address);
		pgd_t *pgd, *pgd_k;
		pmd_t *pmd, *pmd_k;
		pte_t *pte_k;

		pgd = (pgd_t *) pgd_current[smp_processor_id()] + offset;
		pgd_k = init_mm.pgd + offset;

		if (!pgd_present(*pgd_k))
			goto no_context;
		set_pgd(pgd, *pgd_k);

		pmd = pmd_offset(pgd, address);
		pmd_k = pmd_offset(pgd_k, address);
		if (!pmd_present(*pmd_k))
			goto no_context;
		set_pmd(pmd, *pmd_k);

		pte_k = pte_offset(pmd_k, address);
		if (!pte_present(*pte_k))
			goto no_context;
		return;
	}
}