/*
* I/O SAPIC support.
*
* Copyright (C) 1999 Intel Corp.
* Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
* Copyright (C) 2000-2002 J.I. Lee <jung-ik.lee@intel.com>
* Copyright (C) 1999-2000, 2002-2003 Hewlett-Packard Co.
* David Mosberger-Tang <davidm@hpl.hp.com>
* Copyright (C) 1999 VA Linux Systems
* Copyright (C) 1999,2000 Walt Drummond <drummond@valinux.com>
*
* 00/04/19 D. Mosberger Rewritten to mirror more closely the x86 I/O APIC code.
* In particular, we now have separate handlers for edge
* and level triggered interrupts.
* 00/10/27 Asit Mallick, Goutham Rao <goutham.rao@intel.com> IRQ vector allocation
* PCI to vector mapping, shared PCI interrupts.
* 00/10/27 D. Mosberger Document things a bit more to make them more understandable.
* Clean up much of the old IOSAPIC cruft.
* 01/07/27 J.I. Lee PCI irq routing, Platform/Legacy interrupts and fixes for
* ACPI S5(SoftOff) support.
* 02/01/23 J.I. Lee iosapic pgm fixes for PCI irq routing from _PRT
* 02/01/07 E. Focht <efocht@ess.nec.de> Redirectable interrupt vectors in
* iosapic_set_affinity(), initializations for
* /proc/irq/#/smp_affinity
* 02/04/02 P. Diefenbaugh Cleaned up ACPI PCI IRQ routing.
* 02/04/18 J.I. Lee bug fix in iosapic_init_pci_irq
* 02/04/30 J.I. Lee bug fix in find_iosapic to fix ACPI PCI IRQ to IOSAPIC mapping error
* 02/07/29 T. Kochi Allocate interrupt vectors dynamically
* 02/08/04 T. Kochi Cleaned up terminology (irq, global system interrupt, vector, etc.)
* 02/08/13 B. Helgaas Support PCI segments
* 03/02/19 B. Helgaas Make pcat_compat system-wide, not per-IOSAPIC.
* Remove iosapic_address & gsi_base from external interfaces.
* Rationalize __init/__devinit attributes.
*/
/*
* Here is what the interrupt logic between a PCI device and the CPU looks like:
*
* (1) A PCI device raises one of the four interrupt pins (INTA, INTB, INTC, INTD). The
* device is uniquely identified by its segment--, bus--, and slot-number (the function
* number does not matter here because all functions share the same interrupt
* lines).
*
* (2) The motherboard routes the interrupt line to a pin on a IOSAPIC controller.
* Multiple interrupt lines may have to share the same IOSAPIC pin (if they're level
* triggered and use the same polarity). Each interrupt line has a unique Global
* System Interrupt (GSI) number which can be calculated as the sum of the controller's
* base GSI number and the IOSAPIC pin number to which the line connects.
*
* (3) The IOSAPIC uses internal routing table entries (RTEs) to map the IOSAPIC pin
* to the IA-64 interrupt vector. This interrupt vector is then sent to the CPU.
*
* (4) The kernel recognizes an interrupt as an IRQ. The IRQ interface
* is an architecture-independent interrupt handling mechanism in
* Linux. An IRQ is a number, so we need a mapping between IRQ
* numbers and IA-64 vectors. The platform_irq_to_vector(irq) and
* platform_local_vector_to_irq(vector) APIs can define platform-
* specific mappings.
*
* To sum up, there are three levels of mappings involved:
*
* PCI pin -> global system interrupt (GSI) -> IA-64 vector <-> IRQ
*
* Note: The term "IRQ" is loosely used everywhere in the Linux kernel
* to describe interrupts. In this module, "IRQ" refers only to Linux
* IRQ numbers ("isa_irq" is an exception to this rule).
*/
#include <linux/config.h>
#include <linux/acpi.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <linux/string.h>
#include <asm/delay.h>
#include <asm/hw_irq.h>
#include <asm/io.h>
#include <asm/iosapic.h>
#include <asm/machvec.h>
#include <asm/processor.h>
#include <asm/ptrace.h>
#include <asm/system.h>
#undef DEBUG_INTERRUPT_ROUTING
#ifdef DEBUG_INTERRUPT_ROUTING
#define DBG(fmt...) printk(fmt)
#else
#define DBG(fmt...)
#endif
static spinlock_t iosapic_lock = SPIN_LOCK_UNLOCKED;
/* PCI pin to GSI routing information. This info typically comes from ACPI. */
static struct {
int num_routes;
struct pci_vector_struct *route;
} pci_irq;
/* These tables map IA-64 vectors to the IOSAPIC pin that generates this vector. */
static struct iosapic_intr_info {
char *addr; /* base address of IOSAPIC */
unsigned int gsi_base; /* first GSI assigned to this IOSAPIC */
char rte_index; /* IOSAPIC RTE index (-1 => not an IOSAPIC interrupt) */
unsigned char dmode : 3; /* delivery mode (see iosapic.h) */
unsigned char polarity: 1; /* interrupt polarity (see iosapic.h) */
unsigned char trigger : 1; /* trigger mode (see iosapic.h) */
} iosapic_intr_info[IA64_NUM_VECTORS];
static struct iosapic {
char *addr; /* base address of IOSAPIC */
unsigned int gsi_base; /* first GSI assigned to this IOSAPIC */
unsigned short num_rte; /* number of RTE in this IOSAPIC */
} iosapic_lists[256];
static int num_iosapic;
static unsigned char pcat_compat __initdata; /* 8259 compatibility flag */
/*
* Find an IOSAPIC associated with a GSI
*/
static inline int
find_iosapic (unsigned int gsi)
{
int i;
for (i = 0; i < num_iosapic; i++) {
if ((unsigned) (gsi - iosapic_lists[i].gsi_base) < iosapic_lists[i].num_rte)
return i;
}
return -1;
}
/*
* Translate GSI number to the corresponding IA-64 interrupt vector. If no
* entry exists, return -1.
*/
int
gsi_to_vector (unsigned int gsi)
{
int vector;
for (vector = 0; vector < IA64_NUM_VECTORS; vector++)
if (iosapic_intr_info[vector].gsi_base + iosapic_intr_info[vector].rte_index == gsi)
return vector;
return -1;
}
static void
set_rte (unsigned int vector, unsigned int dest)
{
unsigned long pol, trigger, dmode;
u32 low32, high32;
char *addr;
int rte_index;
char redir;
DBG(KERN_DEBUG "IOSAPIC: routing vector %d to 0x%x\n", vector, dest);
rte_index = iosapic_intr_info[vector].rte_index;
if (rte_index < 0)
return; /* not an IOSAPIC interrupt */
addr = iosapic_intr_info[vector].addr;
pol = iosapic_intr_info[vector].polarity;
trigger = iosapic_intr_info[vector].trigger;
dmode = iosapic_intr_info[vector].dmode;
redir = (dmode == IOSAPIC_LOWEST_PRIORITY) ? 1 : 0;
#ifdef CONFIG_SMP
{
unsigned int irq;
for (irq = 0; irq < NR_IRQS; ++irq)
if (irq_to_vector(irq) == vector) {
set_irq_affinity_info(irq, (int)(dest & 0xffff), redir);
break;
}
}
#endif
low32 = ((pol << IOSAPIC_POLARITY_SHIFT) |
(trigger << IOSAPIC_TRIGGER_SHIFT) |
(dmode << IOSAPIC_DELIVERY_SHIFT) |
vector);
/* dest contains both id and eid */
high32 = (dest << IOSAPIC_DEST_SHIFT);
writel(IOSAPIC_RTE_HIGH(rte_index), addr + IOSAPIC_REG_SELECT);
writel(high32, addr + IOSAPIC_WINDOW);
writel(IOSAPIC_RTE_LOW(rte_index), addr + IOSAPIC_REG_SELECT);
writel(low32, addr + IOSAPIC_WINDOW);
}
static void
nop (unsigned int vector)
{
/* do nothing... */
}
static void
mask_irq (unsigned int irq)
{
unsigned long flags;
char *addr;
u32 low32;
int rte_index;
ia64_vector vec = irq_to_vector(irq);
addr = iosapic_intr_info[vec].addr;
rte_index = iosapic_intr_info[vec].rte_index;
if (rte_index < 0)
return; /* not an IOSAPIC interrupt! */
spin_lock_irqsave(&iosapic_lock, flags);
{
writel(IOSAPIC_RTE_LOW(rte_index), addr + IOSAPIC_REG_SELECT);
low32 = readl(addr + IOSAPIC_WINDOW);
low32 |= (1 << IOSAPIC_MASK_SHIFT); /* set only the mask bit */
writel(low32, addr + IOSAPIC_WINDOW);
}
spin_unlock_irqrestore(&iosapic_lock, flags);
}
static void
unmask_irq (unsigned int irq)
{
unsigned long flags;
char *addr;
u32 low32;
int rte_index;
ia64_vector vec = irq_to_vector(irq);
addr = iosapic_intr_info[vec].addr;
rte_index = iosapic_intr_info[vec].rte_index;
if (rte_index < 0)
return; /* not an IOSAPIC interrupt! */
spin_lock_irqsave(&iosapic_lock, flags);
{
writel(IOSAPIC_RTE_LOW(rte_index), addr + IOSAPIC_REG_SELECT);
low32 = readl(addr + IOSAPIC_WINDOW);
low32 &= ~(1 << IOSAPIC_MASK_SHIFT); /* clear only the mask bit */
writel(low32, addr + IOSAPIC_WINDOW);
}
spin_unlock_irqrestore(&iosapic_lock, flags);
}
static void
iosapic_set_affinity (unsigned int irq, unsigned long mask)
{
#ifdef CONFIG_SMP
unsigned long flags;
u32 high32, low32;
int dest, rte_index;
char *addr;
int redir = (irq & IA64_IRQ_REDIRECTED) ? 1 : 0;
ia64_vector vec;
irq &= (~IA64_IRQ_REDIRECTED);
vec = irq_to_vector(irq);
mask &= (1UL << smp_num_cpus) - 1;
if (!mask || vec >= IA64_NUM_VECTORS)
return;
dest = cpu_physical_id(ffz(~mask));
rte_index = iosapic_intr_info[vec].rte_index;
addr = iosapic_intr_info[vec].addr;
if (rte_index < 0)
return; /* not an IOSAPIC interrupt */
set_irq_affinity_info(irq, dest, redir);
/* dest contains both id and eid */
high32 = dest << IOSAPIC_DEST_SHIFT;
spin_lock_irqsave(&iosapic_lock, flags);
{
/* get current delivery mode by reading the low32 */
writel(IOSAPIC_RTE_LOW(rte_index), addr + IOSAPIC_REG_SELECT);
low32 = readl(addr + IOSAPIC_WINDOW);
low32 &= ~(7 << IOSAPIC_DELIVERY_SHIFT);
if (redir)
/* change delivery mode to lowest priority */
low32 |= (IOSAPIC_LOWEST_PRIORITY << IOSAPIC_DELIVERY_SHIFT);
else
/* change delivery mode to fixed */
low32 |= (IOSAPIC_FIXED << IOSAPIC_DELIVERY_SHIFT);
writel(IOSAPIC_RTE_HIGH(rte_index), addr + IOSAPIC_REG_SELECT);
writel(high32, addr + IOSAPIC_WINDOW);
writel(IOSAPIC_RTE_LOW(rte_index), addr + IOSAPIC_REG_SELECT);
writel(low32, addr + IOSAPIC_WINDOW);
}
spin_unlock_irqrestore(&iosapic_lock, flags);
#endif
}
/*
* Handlers for level-triggered interrupts.
*/
static unsigned int
iosapic_startup_level_irq (unsigned int irq)
{
unmask_irq(irq);
return 0;
}
static void
iosapic_end_level_irq (unsigned int irq)
{
ia64_vector vec = irq_to_vector(irq);
writel(vec, iosapic_intr_info[vec].addr + IOSAPIC_EOI);
}
#define iosapic_shutdown_level_irq mask_irq
#define iosapic_enable_level_irq unmask_irq
#define iosapic_disable_level_irq mask_irq
#define iosapic_ack_level_irq nop
struct hw_interrupt_type irq_type_iosapic_level = {
.typename = "IO-SAPIC-level",
.startup = iosapic_startup_level_irq,
.shutdown = iosapic_shutdown_level_irq,
.enable = iosapic_enable_level_irq,
.disable = iosapic_disable_level_irq,
.ack = iosapic_ack_level_irq,
.end = iosapic_end_level_irq,
.set_affinity = iosapic_set_affinity
};
/*
* Handlers for edge-triggered interrupts.
*/
static unsigned int
iosapic_startup_edge_irq (unsigned int irq)
{
unmask_irq(irq);
/*
* IOSAPIC simply drops interrupts pended while the
* corresponding pin was masked, so we can't know if an
* interrupt is pending already. Let's hope not...
*/
return 0;
}
static void
iosapic_ack_edge_irq (unsigned int irq)
{
irq_desc_t *idesc = irq_desc(irq);
/*
* Once we have recorded IRQ_PENDING already, we can mask the
* interrupt for real. This prevents IRQ storms from unhandled
* devices.
*/
if ((idesc->status & (IRQ_PENDING|IRQ_DISABLED)) == (IRQ_PENDING|IRQ_DISABLED))
mask_irq(irq);
}
#define iosapic_enable_edge_irq unmask_irq
#define iosapic_disable_edge_irq nop
#define iosapic_end_edge_irq nop
struct hw_interrupt_type irq_type_iosapic_edge = {
.typename = "IO-SAPIC-edge",
.startup = iosapic_startup_edge_irq,
.shutdown = iosapic_disable_edge_irq,
.enable = iosapic_enable_edge_irq,
.disable = iosapic_disable_edge_irq,
.ack = iosapic_ack_edge_irq,
.end = iosapic_end_edge_irq,
.set_affinity = iosapic_set_affinity
};
unsigned int
iosapic_version (char *addr)
{
/*
* IOSAPIC Version Register return 32 bit structure like:
* {
* unsigned int version : 8;
* unsigned int reserved1 : 8;
* unsigned int max_redir : 8;
* unsigned int reserved2 : 8;
* }
*/
writel(IOSAPIC_VERSION, addr + IOSAPIC_REG_SELECT);
return readl(IOSAPIC_WINDOW + addr);
}
/*
* if the given vector is already owned by other,
* assign a new vector for the other and make the vector available
*/
static void __init
iosapic_reassign_vector (int vector)
{
int new_vector;
if (iosapic_intr_info[vector].rte_index >= 0 || iosapic_intr_info[vector].addr
|| iosapic_intr_info[vector].gsi_base || iosapic_intr_info[vector].dmode
|| iosapic_intr_info[vector].polarity || iosapic_intr_info[vector].trigger)
{
new_vector = ia64_alloc_vector();
printk(KERN_INFO "Reassigning vector %d to %d\n", vector, new_vector);
memcpy(&iosapic_intr_info[new_vector], &iosapic_intr_info[vector],
sizeof(struct iosapic_intr_info));
memset(&iosapic_intr_info[vector], 0, sizeof(struct iosapic_intr_info));
iosapic_intr_info[vector].rte_index = -1;
}
}
static void
register_intr (unsigned int gsi, int vector, unsigned char delivery,
unsigned long polarity, unsigned long trigger)
{
irq_desc_t *idesc;
struct hw_interrupt_type *irq_type;
int rte_index;
int index;
unsigned long gsi_base;
char *iosapic_address;
index = find_iosapic(gsi);
if (index < 0) {
printk(KERN_WARNING "%s: No IOSAPIC for GSI 0x%x\n", __FUNCTION__, gsi);
return;
}
iosapic_address = iosapic_lists[index].addr;
gsi_base = iosapic_lists[index].gsi_base;
rte_index = gsi - gsi_base;
iosapic_intr_info[vector].rte_index = rte_index;
iosapic_intr_info[vector].polarity = polarity;
iosapic_intr_info[vector].dmode = delivery;
iosapic_intr_info[vector].addr = iosapic_address;
iosapic_intr_info[vector].gsi_base = gsi_base;
iosapic_intr_info[vector].trigger = trigger;
if (trigger == IOSAPIC_EDGE)
irq_type = &irq_type_iosapic_edge;
else
irq_type = &irq_type_iosapic_level;
idesc = irq_desc(vector);
if (idesc->handler != irq_type) {
if (idesc->handler != &no_irq_type)
printk(KERN_WARNING "%s: changing vector %d from %s to %s\n",
__FUNCTION__, vector, idesc->handler->typename, irq_type->typename);
idesc->handler = irq_type;
}
}
/*
* ACPI can describe IOSAPIC interrupts via static tables and namespace
* methods. This provides an interface to register those interrupts and
* program the IOSAPIC RTE.
*/
int
iosapic_register_intr (unsigned int gsi,
unsigned long polarity, unsigned long trigger)
{
int vector;
unsigned int dest = (ia64_get_lid() >> 16) & 0xffff;
vector = gsi_to_vector(gsi);
if (vector < 0)
vector = ia64_alloc_vector();
register_intr(gsi, vector, IOSAPIC_LOWEST_PRIORITY,
polarity, trigger);
printk(KERN_INFO "GSI 0x%x(%s,%s) -> CPU 0x%04x vector %d\n",
gsi, (polarity == IOSAPIC_POL_HIGH ? "high" : "low"),
(trigger == IOSAPIC_EDGE ? "edge" : "level"), dest, vector);
/* program the IOSAPIC routing table */
set_rte(vector, dest);
return vector;
}
/*
* ACPI calls this when it finds an entry for a platform interrupt.
* Note that the irq_base and IOSAPIC address must be set in iosapic_init().
*/
int __init
iosapic_register_platform_intr (u32 int_type, unsigned int gsi,
int iosapic_vector, u16 eid, u16 id,
unsigned long polarity, unsigned long trigger)
{
unsigned char delivery;
int vector;
unsigned int dest = ((id << 8) | eid) & 0xffff;
switch (int_type) {
case ACPI_INTERRUPT_PMI:
vector = iosapic_vector;
/*
* since PMI vector is alloc'd by FW(ACPI) not by kernel,
* we need to make sure the vector is available
*/
iosapic_reassign_vector(vector);
delivery = IOSAPIC_PMI;
break;
case ACPI_INTERRUPT_INIT:
vector = ia64_alloc_vector();
delivery = IOSAPIC_INIT;
break;
case ACPI_INTERRUPT_CPEI:
vector = IA64_CPE_VECTOR;
delivery = IOSAPIC_LOWEST_PRIORITY;
break;
default:
printk(KERN_ERR "%s: invalid interrupt type (%d)\n", __FUNCTION__,
int_type);
return -1;
}
register_intr(gsi, vector, delivery, polarity, trigger);
printk(KERN_INFO "PLATFORM int 0x%x: GSI 0x%x(%s,%s) -> CPU 0x%04x vector %d\n",
int_type, gsi, (polarity == IOSAPIC_POL_HIGH ? "high" : "low"),
(trigger == IOSAPIC_EDGE ? "edge" : "level"), dest, vector);
/* program the IOSAPIC routing table */
set_rte(vector, dest);
return vector;
}
/*
* ACPI calls this when it finds an entry for a legacy ISA IRQ override.
* Note that the gsi_base and IOSAPIC address must be set in iosapic_init().
*/
void __init
iosapic_override_isa_irq (unsigned int isa_irq, unsigned int gsi,
unsigned long polarity, unsigned long trigger)
{
int vector;
unsigned int dest = (ia64_get_lid() >> 16) & 0xffff;
vector = isa_irq_to_vector(isa_irq);
register_intr(gsi, vector, IOSAPIC_LOWEST_PRIORITY, polarity, trigger);
DBG("ISA: IRQ %u -> GSI 0x%x (%s,%s) -> CPU 0x%04x vector %d\n",
isa_irq, gsi,
polarity == IOSAPIC_POL_HIGH ? "high" : "low", trigger == IOSAPIC_EDGE ? "edge" : "level",
dest, vector);
/* program the IOSAPIC routing table */
set_rte(vector, dest);
}
/*
* Map PCI pin to the corresponding GSI.
* If no such mapping exists, return -1.
*/
static int
pci_pin_to_gsi (int segment, int bus, int slot, int pci_pin, unsigned int *gsi)
{
struct pci_vector_struct *r;
for (r = pci_irq.route; r < pci_irq.route + pci_irq.num_routes; r++)
if (r->segment == segment && r->bus == bus &&
(r->pci_id >> 16) == slot && r->pin == pci_pin) {
*gsi = r->irq;
return 0;
}
return -1;
}
/*
* Map PCI pin to the corresponding IA-64 interrupt vector. If no such mapping exists,
* try to allocate a new vector. If it fails, return -1.
*/
static int
pci_pin_to_vector (int segment, int bus, int slot, int pci_pin)
{
int vector;
unsigned int gsi;
if (pci_pin_to_gsi(segment, bus, slot, pci_pin, &gsi) < 0) {
printk(KERN_ERR "PCI: no interrupt route for %02x:%02x:%02x pin %c\n",
segment, bus, slot, 'A' + pci_pin);
return -1;
}
vector = gsi_to_vector(gsi);
if (vector < 0) {
/* allocate a vector for this interrupt line */
if (pcat_compat && (gsi < 16))
vector = isa_irq_to_vector(gsi);
else {
/* new GSI; allocate a vector for it */
vector = ia64_alloc_vector();
}
register_intr(gsi, vector, IOSAPIC_LOWEST_PRIORITY, IOSAPIC_POL_LOW, IOSAPIC_LEVEL);
DBG("PCI: (%02x:%02x:%02x INT%c) -> GSI 0x%x -> vector %d\n",
segment, bus, slot, 'A' + pci_pin, gsi, vector);
}
return vector;
}
void __init
iosapic_system_init (int system_pcat_compat)
{
int vector;
for (vector = 0; vector < IA64_NUM_VECTORS; ++vector)
iosapic_intr_info[vector].rte_index = -1; /* mark as unused */
pcat_compat = system_pcat_compat;
if (pcat_compat) {
/*
* Disable the compatibility mode interrupts (8259 style), needs IN/OUT support
* enabled.
*/
printk(KERN_INFO "%s: Disabling PC-AT compatible 8259 interrupts\n", __FUNCTION__);
outb(0xff, 0xA1);
outb(0xff, 0x21);
}
}
void __init
iosapic_init (unsigned long phys_addr, unsigned int gsi_base)
{
int num_rte;
unsigned int isa_irq, ver;
char *addr;
addr = ioremap(phys_addr, 0);
ver = iosapic_version(addr);
/*
* The MAX_REDIR register holds the highest input pin
* number (starting from 0).
* We add 1 so that we can use it for number of pins (= RTEs)
*/
num_rte = ((ver >> 16) & 0xff) + 1;
iosapic_lists[num_iosapic].addr = addr;
iosapic_lists[num_iosapic].gsi_base = gsi_base;
iosapic_lists[num_iosapic].num_rte = num_rte;
num_iosapic++;
printk(KERN_INFO " IOSAPIC v%x.%x, address 0x%lx, GSIs 0x%x-0x%x\n",
(ver & 0xf0) >> 4, (ver & 0x0f), phys_addr, gsi_base, gsi_base + num_rte - 1);
if ((gsi_base == 0) && pcat_compat) {
/*
* Map the legacy ISA devices into the IOSAPIC data. Some of these may
* get reprogrammed later on with data from the ACPI Interrupt Source
* Override table.
*/
for (isa_irq = 0; isa_irq < 16; ++isa_irq)
iosapic_override_isa_irq(isa_irq, isa_irq, IOSAPIC_POL_HIGH, IOSAPIC_EDGE);
}
}
/*
* Set allocated interrupt vector to dev->irq and
* program IOSAPIC to deliver interrupts
*/
void
iosapic_fixup_pci_interrupt (struct pci_dev *dev)
{
int segment;
unsigned char pci_pin;
int vector;
unsigned int dest;
struct hw_interrupt_type *irq_type;
irq_desc_t *idesc;
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pci_pin);
if (pci_pin) {
pci_pin--; /* interrupt pins are numberd starting from 1 */
segment = PCI_SEGMENT(dev);
vector = pci_pin_to_vector(segment, dev->bus->number, PCI_SLOT(dev->devfn), pci_pin);
if (vector < 0 && dev->bus->parent) {
/* go back to the bridge */
struct pci_dev *bridge = dev->bus->self;
if (bridge) {
/* allow for multiple bridges on an adapter */
do {
/* do the bridge swizzle... */
pci_pin = (pci_pin + PCI_SLOT(dev->devfn)) % 4;
vector = pci_pin_to_vector(segment,
bridge->bus->number,
PCI_SLOT(bridge->devfn),
pci_pin);
} while (vector < 0 && (bridge = bridge->bus->self));
}
if (vector >= 0)
printk(KERN_WARNING
"PCI: using PPB (%s INT%c) to get vector %d\n",
dev->slot_name, 'A' + pci_pin,
vector);
else
printk(KERN_WARNING
"PCI: Couldn't map irq for (%s INT%c)\n",
dev->slot_name, 'A' + pci_pin);
}
if (vector >= 0) {
dev->irq = vector;
irq_type = &irq_type_iosapic_level;
idesc = irq_desc(vector);
if (idesc->handler != irq_type) {
if (idesc->handler != &no_irq_type)
printk(KERN_INFO "%s: changing vector %d from %s to %s\n",
__FUNCTION__, vector,
idesc->handler->typename,
irq_type->typename);
idesc->handler = irq_type;
}
#ifdef CONFIG_SMP
/*
* For platforms that do not support interrupt redirect
* via the XTP interface, we can round-robin the PCI
* device interrupts to the processors
*/
if (!(smp_int_redirect & SMP_IRQ_REDIRECTION)) {
static int cpu_index = 0;
dest = cpu_physical_id(cpu_index) & 0xffff;
cpu_index++;
if (cpu_index >= smp_num_cpus)
cpu_index = 0;
} else {
/*
* Direct the interrupt vector to the current cpu,
* platform redirection will distribute them.
*/
dest = (ia64_get_lid() >> 16) & 0xffff;
}
#else
/* direct the interrupt vector to the running cpu id */
dest = (ia64_get_lid() >> 16) & 0xffff;
#endif
printk(KERN_INFO "PCI->APIC IRQ transform: (%s INT%c) -> CPU 0x%04x vector %d\n",
dev->slot_name, 'A' + pci_pin, dest, vector);
set_rte(vector, dest);
}
}
}
void
iosapic_pci_fixup (int phase)
{
struct pci_dev *dev;
if (phase == 0) {
if (0 != acpi_get_prt(&pci_irq.route, &pci_irq.num_routes)) {
printk(KERN_ERR "%s: acpi_get_prt failed\n", __FUNCTION__);
}
return;
}
if (phase != 1)
return;
pci_for_each_dev(dev) {
/* fixup dev->irq and program IOSAPIC */
iosapic_fixup_pci_interrupt(dev);
/*
* Nothing to fixup
* Fix out-of-range IRQ numbers
*/
if (dev->irq >= IA64_NUM_VECTORS)
dev->irq = 15; /* Spurious interrupts */
}
}
![[BACK]](/icons/back.gif){kind=icon}
Return to iosapic.c CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [Development] / linux-2.4-xfs / arch / ia64 / kernel